! Started logfile: J0032+1953_S_2017_09_26_pus_uvs.log on Sat May 11 12:53:04 2019 obs J0032+1953_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0032+1953_S_2017_09_26_pus_uva.fits ! AN table 1: 295 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.875989 visibilities/baseline/integration-bin. ! Found source: J0032+1953 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 37212 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0032+1953_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 167 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 314 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 946 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1348 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.921518Jy sigma=0.008800 ! Fit after self-cal, rms=0.878885Jy sigma=0.008413 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.819 mas, bmaj=10.72 mas, bpa=-18.75 degrees ! Estimated noise=882.658 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0920748 Jy ! Component: 100 - total flux cleaned = 0.14743 Jy ! Total flux subtracted in 100 components = 0.14743 Jy ! Clean residual min=-0.022982 max=0.041058 Jy/beam ! Clean residual mean=0.000062 rms=0.009406 Jy/beam ! Combined flux in latest and established models = 0.14743 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 46 components and 0.14743 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226068Jy sigma=0.002316 ! Fit after self-cal, rms=0.225497Jy sigma=0.002311 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.546 mas, bmaj=11.84 mas, bpa=-18.47 degrees ! Estimated noise=463.844 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0935103 Jy ! Component: 100 - total flux cleaned = 0.160546 Jy ! Component: 150 - total flux cleaned = 0.210613 Jy ! Component: 200 - total flux cleaned = 0.248093 Jy ! Total flux subtracted in 200 components = 0.248093 Jy ! Clean residual min=-0.035631 max=0.058599 Jy/beam ! Clean residual mean=0.000244 rms=0.016188 Jy/beam ! Combined flux in latest and established models = 0.395523 Jy ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 100 components and 0.395523 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172680Jy sigma=0.001761 ! Fit after self-cal, rms=0.170768Jy sigma=0.001745 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.29 FD 1.02 HN 0.70 KP 1.02 ! LA 0.77 MK 1.58 NL 2.69 OV 2.26 ! PT 0.57 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 1.12 HN 0.75 KP 0.94 ! LA 0.72 MK 1.54 NL 3.04 OV 2.09 ! PT 0.59 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.62 FD 1.17 HN 0.93 KP 0.91 ! LA 0.72 MK 1.48 NL 2.53 OV 1.87 ! PT 0.56 ! ! ! Correcting IF 4. ! A total of 21 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.05 HN 0.80 KP 1.00* ! LA 0.62 MK 1.19 NL 1.00* OV 1.68 ! PT 0.65 ! ! ! Fit before self-cal, rms=0.170768Jy sigma=0.001745 ! Fit after self-cal, rms=0.200656Jy sigma=0.001087 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.817 mas, bmaj=11.62 mas, bpa=-18.14 degrees ! Estimated noise=466.265 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135756 Jy ! Component: 100 - total flux cleaned = 0.00164337 Jy ! Component: 150 - total flux cleaned = 0.00176529 Jy ! Component: 200 - total flux cleaned = 0.00176368 Jy ! Total flux subtracted in 200 components = 0.00176368 Jy ! Clean residual min=-0.021366 max=0.028366 Jy/beam ! Clean residual mean=0.000057 rms=0.006811 Jy/beam ! Combined flux in latest and established models = 0.397287 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 108 components and 0.397287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200164Jy sigma=0.001085 ! Fit after self-cal, rms=0.205810Jy sigma=0.001064 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.205810Jy sigma=0.001064 ! Fit after self-cal, rms=0.265725Jy sigma=0.000981 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.83 mas, bmaj=11.11 mas, bpa=-18.27 degrees ! Estimated noise=459.754 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00555134 Jy ! Component: 100 - total flux cleaned = 0.00619864 Jy ! Component: 150 - total flux cleaned = 0.006313 Jy ! Component: 200 - total flux cleaned = 0.00612041 Jy ! Total flux subtracted in 200 components = 0.00612041 Jy ! Clean residual min=-0.017526 max=0.024136 Jy/beam ! Clean residual mean=0.000094 rms=0.005730 Jy/beam ! Combined flux in latest and established models = 0.403407 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 128 components and 0.403407 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.264959Jy sigma=0.000984 ! Fit after self-cal, rms=0.266003Jy sigma=0.000981 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.45646e-05 Jy ! Component: 100 - total flux cleaned = -9.75611e-05 Jy ! Component: 150 - total flux cleaned = -0.000198277 Jy ! Component: 200 - total flux cleaned = -0.000287521 Jy ! Total flux subtracted in 200 components = -0.000287521 Jy ! Clean residual min=-0.017421 max=0.023668 Jy/beam ! Clean residual mean=0.000093 rms=0.005716 Jy/beam ! Combined flux in latest and established models = 0.40312 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 139 components and 0.40312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265537Jy sigma=0.000983 ! Fit after self-cal, rms=0.265894Jy sigma=0.000982 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.265894Jy sigma=0.000982 ! Fit after self-cal, rms=0.287821Jy sigma=0.000980 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.786 mas, bmaj=11.01 mas, bpa=-18.13 degrees ! Estimated noise=450.901 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00463553 Jy ! Component: 100 - total flux cleaned = 0.00503418 Jy ! Component: 150 - total flux cleaned = 0.00533389 Jy ! Component: 200 - total flux cleaned = 0.00525111 Jy ! Total flux subtracted in 200 components = 0.00525111 Jy ! Clean residual min=-0.017413 max=0.023218 Jy/beam ! Clean residual mean=0.000088 rms=0.005622 Jy/beam ! Combined flux in latest and established models = 0.408371 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 149 components and 0.408371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287236Jy sigma=0.000984 ! Fit after self-cal, rms=0.287845Jy sigma=0.000983 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000500703 Jy ! Component: 100 - total flux cleaned = -0.000507998 Jy ! Component: 150 - total flux cleaned = -0.000600487 Jy ! Component: 200 - total flux cleaned = -0.000601263 Jy ! Total flux subtracted in 200 components = -0.000601263 Jy ! Clean residual min=-0.017398 max=0.023175 Jy/beam ! Clean residual mean=0.000088 rms=0.005629 Jy/beam ! Combined flux in latest and established models = 0.407769 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 156 components and 0.407769 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287496Jy sigma=0.000985 ! Fit after self-cal, rms=0.287912Jy sigma=0.000984 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.287912Jy sigma=0.000984 ! Fit after self-cal, rms=0.306354Jy sigma=0.000983 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.627 mas, bmaj=12.53 mas, bpa=-25.81 degrees ! Estimated noise=523.289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00408735 Jy ! Component: 100 - total flux cleaned = 0.00462496 Jy ! Component: 150 - total flux cleaned = 0.00473484 Jy ! Component: 200 - total flux cleaned = 0.00481716 Jy ! Total flux subtracted in 200 components = 0.00481716 Jy ! Clean residual min=-0.025960 max=0.037420 Jy/beam ! Clean residual mean=0.000151 rms=0.009271 Jy/beam ! Combined flux in latest and established models = 0.412586 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 159 components and 0.412587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305743Jy sigma=0.000989 ! Fit after self-cal, rms=0.306371Jy sigma=0.000986 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000462408 Jy ! Component: 100 - total flux cleaned = -0.000600734 Jy ! Component: 150 - total flux cleaned = -0.00058963 Jy ! Component: 200 - total flux cleaned = -0.000578156 Jy ! Total flux subtracted in 200 components = -0.000578156 Jy ! Clean residual min=-0.025549 max=0.037284 Jy/beam ! Clean residual mean=0.000151 rms=0.009253 Jy/beam ! Combined flux in latest and established models = 0.412008 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 168 components and 0.412008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.305976Jy sigma=0.000991 ! Fit after self-cal, rms=0.306529Jy sigma=0.000989 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=11.07 mas, bpa=-18.38 degrees ! Estimated noise=456.053 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.774 x 11.07 at -18.38 degrees (North through East) ! Clean map min=-0.017382 max=0.13056 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.94 mas, bmaj=10.02 mas, bpa=-18.35 degrees ! Estimated noise=897.521 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0924606 Jy ! Component: 100 - total flux cleaned = 0.156118 Jy ! Component: 150 - total flux cleaned = 0.205375 Jy ! Component: 200 - total flux cleaned = 0.244572 Jy ! Total flux subtracted in 200 components = 0.244572 Jy ! Clean residual min=-0.021522 max=0.025243 Jy/beam ! Clean residual mean=0.000052 rms=0.007001 Jy/beam ! Combined flux in latest and established models = 0.244572 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 82 model components to the UV plane model. ! The established model now contains 82 components and 0.244572 Jy ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=11.07 mas, bpa=-18.38 degrees ! Estimated noise=456.053 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0530608 Jy ! Component: 100 - total flux cleaned = 0.0874931 Jy ! Component: 150 - total flux cleaned = 0.110569 Jy ! Component: 200 - total flux cleaned = 0.126227 Jy ! Total flux subtracted in 200 components = 0.126227 Jy ! Clean residual min=-0.018467 max=0.021102 Jy/beam ! Clean residual mean=0.000094 rms=0.006191 Jy/beam ! Combined flux in latest and established models = 0.370798 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 132 components and 0.370798 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.627 mas, bmaj=12.53 mas, bpa=-25.81 degrees ! Estimated noise=523.289 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173357 Jy ! Component: 100 - total flux cleaned = 0.0260518 Jy ! Component: 150 - total flux cleaned = 0.0306371 Jy ! Component: 200 - total flux cleaned = 0.0326938 Jy ! Total flux subtracted in 200 components = 0.0326938 Jy ! Clean residual min=-0.026074 max=0.037221 Jy/beam ! Clean residual mean=0.000163 rms=0.009345 Jy/beam ! Combined flux in latest and established models = 0.403492 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000379191 Jy ! Component: 100 - total flux cleaned = 0.000660309 Jy ! Component: 150 - total flux cleaned = 0.000857509 Jy ! Component: 200 - total flux cleaned = 0.00104884 Jy ! Total flux subtracted in 200 components = 0.00104884 Jy ! Clean residual min=-0.025875 max=0.037320 Jy/beam ! Clean residual mean=0.000162 rms=0.009329 Jy/beam ! Combined flux in latest and established models = 0.404541 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 150 components and 0.404541 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.774 mas, bmaj=11.07 mas, bpa=-18.38 degrees ! Estimated noise=456.053 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00230125 Jy ! Component: 100 - total flux cleaned = -0.00171338 Jy ! Component: 150 - total flux cleaned = -0.00151764 Jy ! Component: 200 - total flux cleaned = -0.00143381 Jy ! Total flux subtracted in 200 components = -0.00143381 Jy ! Clean residual min=-0.017066 max=0.023422 Jy/beam ! Clean residual mean=0.000094 rms=0.005785 Jy/beam ! Combined flux in latest and established models = 0.403107 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 155 components and 0.403107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.306343Jy sigma=0.000997 ! Fit after self-cal, rms=0.306760Jy sigma=0.000994 wmodel J0032+1953_S_2017_09_26_pus_map.mod ! Writing 155 model components to file: J0032+1953_S_2017_09_26_pus_map.mod wobs J0032+1953_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0032+1953_S_2017_09_26_pus_uvs.fits wwins J0032+1953_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0032+1953_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103048 Jy ! Component: 100 - total flux cleaned = 0.0193062 Jy ! Component: 150 - total flux cleaned = 0.027476 Jy ! Component: 200 - total flux cleaned = 0.0335992 Jy ! Component: 250 - total flux cleaned = 0.0382579 Jy ! Component: 300 - total flux cleaned = 0.0427439 Jy ! Component: 350 - total flux cleaned = 0.0473531 Jy ! Component: 400 - total flux cleaned = 0.0505079 Jy ! Component: 450 - total flux cleaned = 0.0535741 Jy ! Component: 500 - total flux cleaned = 0.0558144 Jy ! Component: 550 - total flux cleaned = 0.0575144 Jy ! Component: 600 - total flux cleaned = 0.0594187 Jy ! Component: 650 - total flux cleaned = 0.0610512 Jy ! Component: 700 - total flux cleaned = 0.0626532 Jy ! Component: 750 - total flux cleaned = 0.0642238 Jy ! Component: 800 - total flux cleaned = 0.0651089 Jy ! Component: 850 - total flux cleaned = 0.0664152 Jy ! Component: 900 - total flux cleaned = 0.0681236 Jy ! Component: 950 - total flux cleaned = 0.0687525 Jy ! Component: 1000 - total flux cleaned = 0.0697912 Jy ! Component: 1050 - total flux cleaned = 0.0710148 Jy ! Component: 1100 - total flux cleaned = 0.0724205 Jy ! Component: 1150 - total flux cleaned = 0.0738044 Jy ! Component: 1200 - total flux cleaned = 0.0747777 Jy ! Component: 1250 - total flux cleaned = 0.0763152 Jy ! Component: 1300 - total flux cleaned = 0.0776407 Jy ! Component: 1350 - total flux cleaned = 0.0791331 Jy ! Component: 1400 - total flux cleaned = 0.0796845 Jy ! Component: 1450 - total flux cleaned = 0.0811402 Jy ! Component: 1500 - total flux cleaned = 0.0823949 Jy ! Component: 1550 - total flux cleaned = 0.0836345 Jy ! Component: 1600 - total flux cleaned = 0.0846825 Jy ! Component: 1650 - total flux cleaned = 0.0855445 Jy ! Component: 1700 - total flux cleaned = 0.0862281 Jy ! Component: 1750 - total flux cleaned = 0.087072 Jy ! Component: 1800 - total flux cleaned = 0.0880716 Jy ! Component: 1850 - total flux cleaned = 0.0884019 Jy ! Component: 1900 - total flux cleaned = 0.0892187 Jy ! Component: 1950 - total flux cleaned = 0.0898637 Jy ! Component: 2000 - total flux cleaned = 0.090343 Jy ! Component: 2050 - total flux cleaned = 0.090977 Jy ! Component: 2100 - total flux cleaned = 0.0916016 Jy ! Component: 2150 - total flux cleaned = 0.0919108 Jy ! Component: 2200 - total flux cleaned = 0.0926782 Jy ! Component: 2250 - total flux cleaned = 0.0926783 Jy ! Component: 2300 - total flux cleaned = 0.0932815 Jy ! Component: 2350 - total flux cleaned = 0.0935782 Jy ! Component: 2400 - total flux cleaned = 0.0938728 Jy ! Component: 2450 - total flux cleaned = 0.0941643 Jy ! Component: 2500 - total flux cleaned = 0.0941651 Jy ! Component: 2550 - total flux cleaned = 0.0947408 Jy ! Component: 2600 - total flux cleaned = 0.0954519 Jy ! Component: 2650 - total flux cleaned = 0.0958737 Jy ! Component: 2700 - total flux cleaned = 0.0960141 Jy ! Component: 2750 - total flux cleaned = 0.096292 Jy ! Component: 2800 - total flux cleaned = 0.0967049 Jy ! Component: 2850 - total flux cleaned = 0.0971137 Jy ! Component: 2900 - total flux cleaned = 0.0976545 Jy ! Component: 2950 - total flux cleaned = 0.0977887 Jy ! Component: 3000 - total flux cleaned = 0.0981882 Jy ! Component: 3050 - total flux cleaned = 0.0984523 Jy ! Component: 3100 - total flux cleaned = 0.0987154 Jy ! Component: 3150 - total flux cleaned = 0.0989765 Jy ! Component: 3200 - total flux cleaned = 0.0993643 Jy ! Component: 3250 - total flux cleaned = 0.0994914 Jy ! Component: 3300 - total flux cleaned = 0.0999996 Jy ! Component: 3350 - total flux cleaned = 0.0994926 Jy ! Component: 3400 - total flux cleaned = 0.0998706 Jy ! Component: 3450 - total flux cleaned = 0.0998703 Jy ! Component: 3500 - total flux cleaned = 0.0998698 Jy ! Component: 3550 - total flux cleaned = 0.0998707 Jy ! Component: 3600 - total flux cleaned = 0.0995034 Jy ! Component: 3650 - total flux cleaned = 0.0997472 Jy ! Component: 3700 - total flux cleaned = 0.0998683 Jy ! Component: 3750 - total flux cleaned = 0.0997479 Jy ! Component: 3800 - total flux cleaned = 0.0998675 Jy ! Component: 3850 - total flux cleaned = 0.100105 Jy ! Component: 3900 - total flux cleaned = 0.0997494 Jy ! Component: 3950 - total flux cleaned = 0.0999848 Jy ! Component: 4000 - total flux cleaned = 0.0998673 Jy ! Component: 4050 - total flux cleaned = 0.100101 Jy ! Total flux subtracted in 4096 components = 0.0999851 Jy ! Clean residual min=-0.007923 max=0.006479 Jy/beam ! Clean residual mean=0.000016 rms=0.002606 Jy/beam ! Combined flux in latest and established models = 0.503092 Jy keep ! Adding 564 model components to the UV plane model. ! The established model now contains 719 components and 0.503092 Jy ![Exited script file: muppet] wmap "J0032+1953_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.774 x 11.07 at -18.38 degrees (North through East) ! Clean map min=-0.013986 max=0.13484 Jy/beam ! Writing clean map to FITS file: J0032+1953_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.134842 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00264661 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.88825 5.88825 11.7765 23.553 47.106 94.212 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0079 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.134 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.774 x 11.07 at -18.38 degrees (North through East) ! Clean map min=-0.013986 max=0.13484 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0032+1953_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:53:11 2019