! Started logfile: J0031-3922_S_2017_02_24_pus_uvs.log on Sat May 4 11:15:07 2019 obs J0031-3922_S_2017_02_24_pus_uva.fits ! Reading UV FITS file: J0031-3922_S_2017_02_24_pus_uva.fits ! AN table 1: 146 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.556164 visibilities/baseline/integration-bin. ! Found source: J0031-3922 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 823 lines of history. ! ! Reading 14616 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0031-3922_S_2017_02_24_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 467 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 467 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 394 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 680 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.978481Jy sigma=0.005302 ! Fit after self-cal, rms=0.926190Jy sigma=0.005070 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.288 mas, bmaj=6.495 mas, bpa=-6.102 degrees ! Estimated noise=2294.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0579382 Jy ! Component: 100 - total flux cleaned = 0.072372 Jy ! Total flux subtracted in 100 components = 0.072372 Jy ! Clean residual min=-0.007852 max=0.007080 Jy/beam ! Clean residual mean=-0.000064 rms=0.001889 Jy/beam ! Combined flux in latest and established models = 0.072372 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.072372 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130923Jy sigma=0.000638 ! Fit after self-cal, rms=0.130281Jy sigma=0.000635 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.106 mas, bmaj=8.137 mas, bpa=-4.015 degrees ! Estimated noise=1235.03 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012008 Jy ! Component: 100 - total flux cleaned = 0.0167459 Jy ! Component: 150 - total flux cleaned = 0.0188519 Jy ! Component: 200 - total flux cleaned = 0.0197426 Jy ! Total flux subtracted in 200 components = 0.0197426 Jy ! Clean residual min=-0.004071 max=0.003671 Jy/beam ! Clean residual mean=0.000017 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 0.0921146 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 36 components and 0.0921146 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129273Jy sigma=0.000630 ! Fit after self-cal, rms=0.129200Jy sigma=0.000629 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.97 HN 1.00* KP 1.09 ! LA 0.95 MK 1.00 NL 0.95 OV 1.09 ! PT 1.07 SC 1.00 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 0.90 HN 1.00* KP 1.07 ! LA 0.95 MK 1.11 NL 0.90 OV 1.08 ! PT 1.02 SC 1.04 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 0.92 KP 1.09 ! LA 0.97 MK 1.13 NL 1.10 OV 1.01 ! PT 1.05 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.96 HN 0.72 KP 1.00* ! LA 0.90 MK 0.88 NL 1.00* OV 0.97 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.129200Jy sigma=0.000629 ! Fit after self-cal, rms=0.127462Jy sigma=0.000628 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.133 mas, bmaj=8.213 mas, bpa=-4.238 degrees ! Estimated noise=1236.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427425 Jy ! Component: 100 - total flux cleaned = 0.000526575 Jy ! Component: 150 - total flux cleaned = 0.000525654 Jy ! Component: 200 - total flux cleaned = 0.000554027 Jy ! Total flux subtracted in 200 components = 0.000554027 Jy ! Clean residual min=-0.003327 max=0.003014 Jy/beam ! Clean residual mean=0.000024 rms=0.000804 Jy/beam ! Combined flux in latest and established models = 0.0926686 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.0926686 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127445Jy sigma=0.000628 ! Fit after self-cal, rms=0.127379Jy sigma=0.000627 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127379Jy sigma=0.000627 ! Fit after self-cal, rms=0.126966Jy sigma=0.000627 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=8.135 mas, bpa=-4.214 degrees ! Estimated noise=1234.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017948 Jy ! Component: 100 - total flux cleaned = 0.00023676 Jy ! Component: 150 - total flux cleaned = 0.000235785 Jy ! Component: 200 - total flux cleaned = 0.000234479 Jy ! Total flux subtracted in 200 components = 0.000234479 Jy ! Clean residual min=-0.003432 max=0.002907 Jy/beam ! Clean residual mean=0.000033 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.0929031 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 52 components and 0.0929031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126954Jy sigma=0.000627 ! Fit after self-cal, rms=0.126915Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.21899e-05 Jy ! Component: 100 - total flux cleaned = 3.64765e-05 Jy ! Component: 150 - total flux cleaned = 3.65273e-05 Jy ! Component: 200 - total flux cleaned = 3.7017e-05 Jy ! Total flux subtracted in 200 components = 3.7017e-05 Jy ! Clean residual min=-0.003233 max=0.002909 Jy/beam ! Clean residual mean=0.000036 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.0929401 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 54 components and 0.0929401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126906Jy sigma=0.000626 ! Fit after self-cal, rms=0.126908Jy sigma=0.000626 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126908Jy sigma=0.000626 ! Fit after self-cal, rms=0.126118Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.109 mas, bmaj=8.083 mas, bpa=-4.401 degrees ! Estimated noise=1227.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216852 Jy ! Component: 100 - total flux cleaned = 0.000296781 Jy ! Component: 150 - total flux cleaned = 0.000272758 Jy ! Component: 200 - total flux cleaned = 0.000273321 Jy ! Total flux subtracted in 200 components = 0.000273321 Jy ! Clean residual min=-0.003123 max=0.002894 Jy/beam ! Clean residual mean=0.000034 rms=0.000763 Jy/beam ! Combined flux in latest and established models = 0.0932134 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 56 components and 0.0932134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126107Jy sigma=0.000626 ! Fit after self-cal, rms=0.126119Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.67761e-05 Jy ! Component: 100 - total flux cleaned = -7.45244e-05 Jy ! Component: 150 - total flux cleaned = -7.31071e-05 Jy ! Component: 200 - total flux cleaned = -5.31741e-05 Jy ! Total flux subtracted in 200 components = -5.31741e-05 Jy ! Clean residual min=-0.003119 max=0.002921 Jy/beam ! Clean residual mean=0.000035 rms=0.000764 Jy/beam ! Combined flux in latest and established models = 0.0931603 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 57 components and 0.0931602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126112Jy sigma=0.000626 ! Fit after self-cal, rms=0.126115Jy sigma=0.000626 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126115Jy sigma=0.000626 ! Fit after self-cal, rms=0.125437Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.92 mas, bmaj=28.46 mas, bpa=0.7989 degrees ! Estimated noise=1530.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000564963 Jy ! Component: 100 - total flux cleaned = 0.000563599 Jy ! Component: 150 - total flux cleaned = 0.000561895 Jy ! Component: 200 - total flux cleaned = 0.000562556 Jy ! Total flux subtracted in 200 components = 0.000562556 Jy ! Clean residual min=-0.002390 max=0.002437 Jy/beam ! Clean residual mean=0.000069 rms=0.000847 Jy/beam ! Combined flux in latest and established models = 0.0937228 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 58 components and 0.0937228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125433Jy sigma=0.000626 ! Fit after self-cal, rms=0.125436Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.30461e-05 Jy ! Component: 100 - total flux cleaned = -4.47366e-05 Jy ! Component: 150 - total flux cleaned = -4.73975e-05 Jy ! Component: 200 - total flux cleaned = -5.03879e-05 Jy ! Total flux subtracted in 200 components = -5.03879e-05 Jy ! Clean residual min=-0.002391 max=0.002410 Jy/beam ! Clean residual mean=0.000070 rms=0.000845 Jy/beam ! Combined flux in latest and established models = 0.0936724 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 58 components and 0.0936724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125434Jy sigma=0.000626 ! Fit after self-cal, rms=0.125432Jy sigma=0.000626 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.09 mas, bmaj=8.045 mas, bpa=-4.556 degrees ! Estimated noise=1220.58 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.09 x 8.045 at -4.556 degrees (North through East) ! Clean map min=-0.002874 max=0.080192 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.29 mas, bmaj=6.45 mas, bpa=-6.683 degrees ! Estimated noise=2237.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0569536 Jy ! Component: 100 - total flux cleaned = 0.0726896 Jy ! Component: 150 - total flux cleaned = 0.0807958 Jy ! Component: 200 - total flux cleaned = 0.0854845 Jy ! Total flux subtracted in 200 components = 0.0854845 Jy ! Clean residual min=-0.006784 max=0.005832 Jy/beam ! Clean residual mean=-0.000002 rms=0.001614 Jy/beam ! Combined flux in latest and established models = 0.0854845 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 27 model components to the UV plane model. ! The established model now contains 27 components and 0.0854845 Jy ! Inverting map and beam ! Estimated beam: bmin=3.09 mas, bmaj=8.045 mas, bpa=-4.556 degrees ! Estimated noise=1220.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0052184 Jy ! Component: 100 - total flux cleaned = 0.00707766 Jy ! Component: 150 - total flux cleaned = 0.00727421 Jy ! Component: 200 - total flux cleaned = 0.00740224 Jy ! Total flux subtracted in 200 components = 0.00740224 Jy ! Clean residual min=-0.003148 max=0.002988 Jy/beam ! Clean residual mean=0.000031 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.0928868 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 40 components and 0.0928868 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.92 mas, bmaj=28.46 mas, bpa=0.7989 degrees ! Estimated noise=1530.64 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00053347 Jy ! Component: 100 - total flux cleaned = 0.000557474 Jy ! Component: 150 - total flux cleaned = 0.000579971 Jy ! Component: 200 - total flux cleaned = 0.000601427 Jy ! Total flux subtracted in 200 components = 0.000601427 Jy ! Clean residual min=-0.002443 max=0.002410 Jy/beam ! Clean residual mean=0.000066 rms=0.000866 Jy/beam ! Combined flux in latest and established models = 0.0934882 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.96758e-05 Jy ! Component: 100 - total flux cleaned = 2.05238e-05 Jy ! Component: 150 - total flux cleaned = 3.88907e-05 Jy ! Component: 200 - total flux cleaned = 5.5671e-05 Jy ! Total flux subtracted in 200 components = 5.5671e-05 Jy ! Clean residual min=-0.002430 max=0.002411 Jy/beam ! Clean residual mean=0.000067 rms=0.000858 Jy/beam ! Combined flux in latest and established models = 0.0935439 Jy ! Adding 7 model components to the UV plane model. ! The established model now contains 42 components and 0.0935439 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.09 mas, bmaj=8.045 mas, bpa=-4.556 degrees ! Estimated noise=1220.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000444152 Jy ! Component: 100 - total flux cleaned = -0.000397207 Jy ! Component: 150 - total flux cleaned = -0.00032235 Jy ! Component: 200 - total flux cleaned = -0.000258363 Jy ! Total flux subtracted in 200 components = -0.000258363 Jy ! Clean residual min=-0.003204 max=0.002971 Jy/beam ! Clean residual mean=0.000034 rms=0.000780 Jy/beam ! Combined flux in latest and established models = 0.0932855 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.0932855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125464Jy sigma=0.000626 ! Fit after self-cal, rms=0.125462Jy sigma=0.000626 wmodel J0031-3922_S_2017_02_24_pus_map.mod ! Writing 56 model components to file: J0031-3922_S_2017_02_24_pus_map.mod wobs J0031-3922_S_2017_02_24_pus_uvs.fits ! Writing UV FITS file: J0031-3922_S_2017_02_24_pus_uvs.fits wwins J0031-3922_S_2017_02_24_pus_map.win ! wwins: Wrote 1 windows to J0031-3922_S_2017_02_24_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00119079 Jy ! Component: 100 - total flux cleaned = -0.00150323 Jy ! Component: 150 - total flux cleaned = -0.00174859 Jy ! Component: 200 - total flux cleaned = -0.0018892 Jy ! Component: 250 - total flux cleaned = -0.00211651 Jy ! Component: 300 - total flux cleaned = -0.0020727 Jy ! Component: 350 - total flux cleaned = -0.00228617 Jy ! Component: 400 - total flux cleaned = -0.00245105 Jy ! Component: 450 - total flux cleaned = -0.00253187 Jy ! Component: 500 - total flux cleaned = -0.00253187 Jy ! Component: 550 - total flux cleaned = -0.00249379 Jy ! Component: 600 - total flux cleaned = -0.00245598 Jy ! Component: 650 - total flux cleaned = -0.00241918 Jy ! Component: 700 - total flux cleaned = -0.00238328 Jy ! Component: 750 - total flux cleaned = -0.00234854 Jy ! Component: 800 - total flux cleaned = -0.00238311 Jy ! Component: 850 - total flux cleaned = -0.00234998 Jy ! Component: 900 - total flux cleaned = -0.00241656 Jy ! Component: 950 - total flux cleaned = -0.00248076 Jy ! Component: 1000 - total flux cleaned = -0.00241627 Jy ! Component: 1050 - total flux cleaned = -0.00244793 Jy ! Component: 1100 - total flux cleaned = -0.00250944 Jy ! Component: 1150 - total flux cleaned = -0.00256945 Jy ! Component: 1200 - total flux cleaned = -0.00250977 Jy ! Component: 1250 - total flux cleaned = -0.00239239 Jy ! Component: 1300 - total flux cleaned = -0.00221944 Jy ! Component: 1350 - total flux cleaned = -0.00207778 Jy ! Component: 1400 - total flux cleaned = -0.00193802 Jy ! Component: 1450 - total flux cleaned = -0.00179999 Jy ! Component: 1500 - total flux cleaned = -0.00166356 Jy ! Component: 1550 - total flux cleaned = -0.00152898 Jy ! Component: 1600 - total flux cleaned = -0.00131656 Jy ! Component: 1650 - total flux cleaned = -0.00123782 Jy ! Component: 1700 - total flux cleaned = -0.00103028 Jy ! Component: 1750 - total flux cleaned = -0.00090197 Jy ! Component: 1800 - total flux cleaned = -0.000725057 Jy ! Component: 1850 - total flux cleaned = -0.000624973 Jy ! Component: 1900 - total flux cleaned = -0.000501424 Jy ! Component: 1950 - total flux cleaned = -0.000354645 Jy ! Component: 2000 - total flux cleaned = -0.000161223 Jy ! Component: 2050 - total flux cleaned = 6.05123e-06 Jy ! Component: 2100 - total flux cleaned = 0.000101052 Jy ! Component: 2150 - total flux cleaned = 0.000358999 Jy ! Component: 2200 - total flux cleaned = 0.000428741 Jy ! Component: 2250 - total flux cleaned = 0.000658475 Jy ! Component: 2300 - total flux cleaned = 0.000840246 Jy ! Component: 2350 - total flux cleaned = 0.000998014 Jy ! Component: 2400 - total flux cleaned = 0.00115448 Jy ! Component: 2450 - total flux cleaned = 0.00141959 Jy ! Component: 2500 - total flux cleaned = 0.00159483 Jy ! Component: 2550 - total flux cleaned = 0.00185527 Jy ! Component: 2600 - total flux cleaned = 0.00200541 Jy ! Component: 2650 - total flux cleaned = 0.00223966 Jy ! Component: 2700 - total flux cleaned = 0.00236626 Jy ! Component: 2750 - total flux cleaned = 0.00259643 Jy ! Component: 2800 - total flux cleaned = 0.00278335 Jy ! Component: 2850 - total flux cleaned = 0.00300963 Jy ! Component: 2900 - total flux cleaned = 0.00319326 Jy ! Component: 2950 - total flux cleaned = 0.00337552 Jy ! Component: 3000 - total flux cleaned = 0.00361615 Jy ! Component: 3050 - total flux cleaned = 0.00371563 Jy ! Component: 3100 - total flux cleaned = 0.00397239 Jy ! Component: 3150 - total flux cleaned = 0.0042073 Jy ! Component: 3200 - total flux cleaned = 0.00440153 Jy ! Component: 3250 - total flux cleaned = 0.00455585 Jy ! Component: 3300 - total flux cleaned = 0.00474718 Jy ! Component: 3350 - total flux cleaned = 0.004918 Jy ! Component: 3400 - total flux cleaned = 0.00516271 Jy ! Component: 3450 - total flux cleaned = 0.00536822 Jy ! Component: 3500 - total flux cleaned = 0.00546074 Jy ! Component: 3550 - total flux cleaned = 0.00564475 Jy ! Component: 3600 - total flux cleaned = 0.0058093 Jy ! Component: 3650 - total flux cleaned = 0.00595471 Jy ! Component: 3700 - total flux cleaned = 0.006153 Jy ! Component: 3750 - total flux cleaned = 0.00640302 Jy ! Component: 3800 - total flux cleaned = 0.00659794 Jy ! Component: 3850 - total flux cleaned = 0.00679146 Jy ! Component: 3900 - total flux cleaned = 0.00693118 Jy ! Component: 3950 - total flux cleaned = 0.00713941 Jy ! Component: 4000 - total flux cleaned = 0.00732889 Jy ! Component: 4050 - total flux cleaned = 0.00750005 Jy ! Total flux subtracted in 4096 components = 0.00772112 Jy ! Clean residual min=-0.000943 max=0.001024 Jy/beam ! Clean residual mean=0.000005 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.101007 Jy keep ! Adding 231 model components to the UV plane model. ! The established model now contains 287 components and 0.101007 Jy ![Exited script file: muppet] wmap "J0031-3922_S_2017_02_24_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.09 x 8.045 at -4.556 degrees (North through East) ! Clean map min=-0.0019816 max=0.077931 Jy/beam ! Writing clean map to FITS file: J0031-3922_S_2017_02_24_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.077931 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000300352 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.15622 1.15622 2.31245 4.6249 9.2498 18.4996 36.9992 73.9984 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.077 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.09 x 8.045 at -4.556 degrees (North through East) ! Clean map min=-0.0019816 max=0.077931 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0031-3922_S_2017_02_24_pus_uvs.log closed on Sat May 4 11:15:12 2019