! Started logfile: J0031-3922_S_2017_02_19_pus_uvs.log on Sat May 4 18:39:03 2019 obs J0031-3922_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0031-3922_S_2017_02_19_pus_uva.fits ! AN table 1: 73 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.301674 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0031-3922 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 3964 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0031-3922_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 378 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 363 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 363 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 500 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.987407Jy sigma=0.005567 ! Fit after self-cal, rms=0.915913Jy sigma=0.005197 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.009 mas, bmaj=6.598 mas, bpa=-5.225 degrees ! Estimated noise=3114.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0642964 Jy ! Component: 100 - total flux cleaned = 0.0788346 Jy ! Total flux subtracted in 100 components = 0.0788346 Jy ! Clean residual min=-0.006734 max=0.008150 Jy/beam ! Clean residual mean=0.000006 rms=0.002150 Jy/beam ! Combined flux in latest and established models = 0.0788345 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0788345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119534Jy sigma=0.000626 ! Fit after self-cal, rms=0.118948Jy sigma=0.000621 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.521 mas, bmaj=7.381 mas, bpa=-5.901 degrees ! Estimated noise=2455.59 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013015 Jy ! Component: 100 - total flux cleaned = 0.0196116 Jy ! Component: 150 - total flux cleaned = 0.0231505 Jy ! Component: 200 - total flux cleaned = 0.0250653 Jy ! Total flux subtracted in 200 components = 0.0250653 Jy ! Clean residual min=-0.006108 max=0.006477 Jy/beam ! Clean residual mean=0.000001 rms=0.001745 Jy/beam ! Combined flux in latest and established models = 0.1039 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 30 components and 0.1039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117353Jy sigma=0.000615 ! Fit after self-cal, rms=0.117064Jy sigma=0.000614 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 1.00* KP 1.07 ! LA 0.96 MK 1.01 NL 1.00* OV 1.15 ! PT 1.00* SC 0.90 ! ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* KP 1.16 ! LA 1.09 MK 1.16 NL 0.92 OV 1.07 ! PT 1.00* SC 1.11 ! ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 1.00* KP 0.87 ! LA 0.88 MK 1.06 NL 0.98 OV 1.00 ! PT 1.00* SC 1.08 ! ! ! Correcting IF 4. ! A total of 162 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.04 HN 1.00* KP 1.00* ! LA 0.85 MK 0.99 NL 1.00* OV 0.84 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.117064Jy sigma=0.000614 ! Fit after self-cal, rms=0.118952Jy sigma=0.000621 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.499 mas, bmaj=7.247 mas, bpa=-3.92 degrees ! Estimated noise=2684.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000256875 Jy ! Component: 100 - total flux cleaned = 0.000185138 Jy ! Component: 150 - total flux cleaned = 0.000152665 Jy ! Component: 200 - total flux cleaned = 0.000151426 Jy ! Total flux subtracted in 200 components = 0.000151426 Jy ! Clean residual min=-0.005759 max=0.005399 Jy/beam ! Clean residual mean=0.000006 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.104051 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 38 components and 0.104051 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118932Jy sigma=0.000621 ! Fit after self-cal, rms=0.118806Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118806Jy sigma=0.000620 ! Fit after self-cal, rms=0.118481Jy sigma=0.000620 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.505 mas, bmaj=7.253 mas, bpa=-3.869 degrees ! Estimated noise=2677.27 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.18295e-05 Jy ! Component: 100 - total flux cleaned = -4.65341e-05 Jy ! Component: 150 - total flux cleaned = -2.15329e-05 Jy ! Component: 200 - total flux cleaned = -2.1579e-05 Jy ! Total flux subtracted in 200 components = -2.1579e-05 Jy ! Clean residual min=-0.005787 max=0.005549 Jy/beam ! Clean residual mean=0.000005 rms=0.001333 Jy/beam ! Combined flux in latest and established models = 0.10403 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 40 components and 0.10403 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118466Jy sigma=0.000620 ! Fit after self-cal, rms=0.118502Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.36046e-05 Jy ! Component: 100 - total flux cleaned = 8.76209e-06 Jy ! Component: 150 - total flux cleaned = 3.08562e-05 Jy ! Component: 200 - total flux cleaned = 2.86468e-05 Jy ! Total flux subtracted in 200 components = 2.86468e-05 Jy ! Clean residual min=-0.005747 max=0.005295 Jy/beam ! Clean residual mean=0.000004 rms=0.001319 Jy/beam ! Combined flux in latest and established models = 0.104058 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.104058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118488Jy sigma=0.000620 ! Fit after self-cal, rms=0.118492Jy sigma=0.000620 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118492Jy sigma=0.000620 ! Fit after self-cal, rms=0.118542Jy sigma=0.000620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.506 mas, bmaj=7.253 mas, bpa=-3.872 degrees ! Estimated noise=2674.46 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000123074 Jy ! Component: 100 - total flux cleaned = -0.000171685 Jy ! Component: 150 - total flux cleaned = -0.000150417 Jy ! Component: 200 - total flux cleaned = -0.000151127 Jy ! Total flux subtracted in 200 components = -0.000151127 Jy ! Clean residual min=-0.005793 max=0.005348 Jy/beam ! Clean residual mean=0.000005 rms=0.001316 Jy/beam ! Combined flux in latest and established models = 0.103907 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 41 components and 0.103907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118531Jy sigma=0.000620 ! Fit after self-cal, rms=0.118562Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.45427e-05 Jy ! Component: 100 - total flux cleaned = -2.44264e-05 Jy ! Component: 150 - total flux cleaned = -2.38454e-05 Jy ! Component: 200 - total flux cleaned = -4.07221e-05 Jy ! Total flux subtracted in 200 components = -4.07221e-05 Jy ! Clean residual min=-0.005762 max=0.005335 Jy/beam ! Clean residual mean=0.000005 rms=0.001314 Jy/beam ! Combined flux in latest and established models = 0.103867 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.103867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118553Jy sigma=0.000620 ! Fit after self-cal, rms=0.118557Jy sigma=0.000620 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118557Jy sigma=0.000620 ! Fit after self-cal, rms=0.118672Jy sigma=0.000620 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.936 mas, bmaj=23.21 mas, bpa=1.199 degrees ! Estimated noise=3992.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000401982 Jy ! Component: 100 - total flux cleaned = 0.000399972 Jy ! Component: 150 - total flux cleaned = 0.000398774 Jy ! Component: 200 - total flux cleaned = 0.000397873 Jy ! Total flux subtracted in 200 components = 0.000397873 Jy ! Clean residual min=-0.005380 max=0.004233 Jy/beam ! Clean residual mean=0.000012 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.104264 Jy selfcal ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 42 components and 0.104264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118674Jy sigma=0.000620 ! Fit after self-cal, rms=0.118691Jy sigma=0.000620 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.68779e-05 Jy ! Component: 100 - total flux cleaned = -3.8687e-05 Jy ! Component: 150 - total flux cleaned = -3.97661e-05 Jy ! Component: 200 - total flux cleaned = -4.05521e-05 Jy ! Total flux subtracted in 200 components = -4.05521e-05 Jy ! Clean residual min=-0.005276 max=0.004188 Jy/beam ! Clean residual mean=0.000011 rms=0.001420 Jy/beam ! Combined flux in latest and established models = 0.104224 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 42 components and 0.104224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118702Jy sigma=0.000620 ! Fit after self-cal, rms=0.118707Jy sigma=0.000620 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.508 mas, bmaj=7.256 mas, bpa=-3.885 degrees ! Estimated noise=2675.04 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.508 x 7.256 at -3.885 degrees (North through East) ! Clean map min=-0.0053306 max=0.088215 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.044 mas, bmaj=6.624 mas, bpa=-5.483 degrees ! Estimated noise=3344.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.065927 Jy ! Component: 100 - total flux cleaned = 0.0819641 Jy ! Component: 150 - total flux cleaned = 0.0896523 Jy ! Component: 200 - total flux cleaned = 0.0943755 Jy ! Total flux subtracted in 200 components = 0.0943755 Jy ! Clean residual min=-0.007664 max=0.007634 Jy/beam ! Clean residual mean=0.000002 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.0943756 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.0943756 Jy ! Inverting map and beam ! Estimated beam: bmin=2.508 mas, bmaj=7.256 mas, bpa=-3.885 degrees ! Estimated noise=2675.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00477245 Jy ! Component: 100 - total flux cleaned = 0.00724288 Jy ! Component: 150 - total flux cleaned = 0.0080384 Jy ! Component: 200 - total flux cleaned = 0.00818201 Jy ! Total flux subtracted in 200 components = 0.00818201 Jy ! Clean residual min=-0.006157 max=0.005529 Jy/beam ! Clean residual mean=0.000006 rms=0.001379 Jy/beam ! Combined flux in latest and established models = 0.102558 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.102558 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.936 mas, bmaj=23.21 mas, bpa=1.199 degrees ! Estimated noise=3992.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152294 Jy ! Component: 100 - total flux cleaned = 0.00152477 Jy ! Component: 150 - total flux cleaned = 0.00152397 Jy ! Component: 200 - total flux cleaned = 0.00152274 Jy ! Total flux subtracted in 200 components = 0.00152274 Jy ! Clean residual min=-0.005074 max=0.003958 Jy/beam ! Clean residual mean=0.000010 rms=0.001407 Jy/beam ! Combined flux in latest and established models = 0.10408 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.18643e-06 Jy ! Component: 100 - total flux cleaned = -2.22179e-06 Jy ! Component: 150 - total flux cleaned = -3.10289e-06 Jy ! Component: 200 - total flux cleaned = -3.86436e-06 Jy ! Total flux subtracted in 200 components = -3.86436e-06 Jy ! Clean residual min=-0.005062 max=0.003951 Jy/beam ! Clean residual mean=0.000010 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.104076 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 40 components and 0.104076 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.508 mas, bmaj=7.256 mas, bpa=-3.885 degrees ! Estimated noise=2675.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110142 Jy ! Component: 100 - total flux cleaned = -0.00103717 Jy ! Component: 150 - total flux cleaned = -0.000944189 Jy ! Component: 200 - total flux cleaned = -0.000853471 Jy ! Total flux subtracted in 200 components = -0.000853471 Jy ! Clean residual min=-0.006022 max=0.005389 Jy/beam ! Clean residual mean=0.000005 rms=0.001342 Jy/beam ! Combined flux in latest and established models = 0.103223 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 53 components and 0.103223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118709Jy sigma=0.000620 ! Fit after self-cal, rms=0.118709Jy sigma=0.000620 wmodel J0031-3922_S_2017_02_19_pus_map.mod ! Writing 53 model components to file: J0031-3922_S_2017_02_19_pus_map.mod wobs J0031-3922_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0031-3922_S_2017_02_19_pus_uvs.fits wwins J0031-3922_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0031-3922_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000638598 Jy ! Component: 100 - total flux cleaned = -0.000492236 Jy ! Component: 150 - total flux cleaned = 0.000457613 Jy ! Component: 200 - total flux cleaned = 0.00133071 Jy ! Component: 250 - total flux cleaned = 0.00202049 Jy ! Component: 300 - total flux cleaned = 0.00261243 Jy ! Component: 350 - total flux cleaned = 0.00317554 Jy ! Component: 400 - total flux cleaned = 0.00371202 Jy ! Component: 450 - total flux cleaned = 0.0042733 Jy ! Component: 500 - total flux cleaned = 0.00485952 Jy ! Component: 550 - total flux cleaned = 0.00546601 Jy ! Component: 600 - total flux cleaned = 0.00591598 Jy ! Component: 650 - total flux cleaned = 0.00639348 Jy ! Component: 700 - total flux cleaned = 0.00689749 Jy ! Component: 750 - total flux cleaned = 0.00726369 Jy ! Component: 800 - total flux cleaned = 0.00765862 Jy ! Component: 850 - total flux cleaned = 0.00800368 Jy ! Component: 900 - total flux cleaned = 0.00822745 Jy ! Component: 950 - total flux cleaned = 0.00848271 Jy ! Component: 1000 - total flux cleaned = 0.00880337 Jy ! Component: 1050 - total flux cleaned = 0.00915154 Jy ! Component: 1100 - total flux cleaned = 0.00932163 Jy ! Component: 1150 - total flux cleaned = 0.0095572 Jy ! Component: 1200 - total flux cleaned = 0.00988639 Jy ! Component: 1250 - total flux cleaned = 0.0101774 Jy ! Component: 1300 - total flux cleaned = 0.0103681 Jy ! Component: 1350 - total flux cleaned = 0.010525 Jy ! Component: 1400 - total flux cleaned = 0.0106797 Jy ! Component: 1450 - total flux cleaned = 0.0108326 Jy ! Component: 1500 - total flux cleaned = 0.011044 Jy ! Component: 1550 - total flux cleaned = 0.0111934 Jy ! Component: 1600 - total flux cleaned = 0.0114006 Jy ! Component: 1650 - total flux cleaned = 0.0116058 Jy ! Component: 1700 - total flux cleaned = 0.0117513 Jy ! Component: 1750 - total flux cleaned = 0.0119536 Jy ! Component: 1800 - total flux cleaned = 0.012126 Jy ! Component: 1850 - total flux cleaned = 0.0123547 Jy ! Component: 1900 - total flux cleaned = 0.012525 Jy ! Component: 1950 - total flux cleaned = 0.0127236 Jy ! Component: 2000 - total flux cleaned = 0.0129494 Jy ! Component: 2050 - total flux cleaned = 0.0131184 Jy ! Component: 2100 - total flux cleaned = 0.0133148 Jy ! Component: 2150 - total flux cleaned = 0.0135388 Jy ! Component: 2200 - total flux cleaned = 0.0136784 Jy ! Component: 2250 - total flux cleaned = 0.0138736 Jy ! Component: 2300 - total flux cleaned = 0.0140127 Jy ! Component: 2350 - total flux cleaned = 0.0141797 Jy ! Component: 2400 - total flux cleaned = 0.0142911 Jy ! Component: 2450 - total flux cleaned = 0.0144877 Jy ! Component: 2500 - total flux cleaned = 0.0145726 Jy ! Component: 2550 - total flux cleaned = 0.0147721 Jy ! Component: 2600 - total flux cleaned = 0.0149738 Jy ! Component: 2650 - total flux cleaned = 0.0151768 Jy ! Component: 2700 - total flux cleaned = 0.015353 Jy ! Component: 2750 - total flux cleaned = 0.0155306 Jy ! Component: 2800 - total flux cleaned = 0.0157398 Jy ! Component: 2850 - total flux cleaned = 0.0159213 Jy ! Component: 2900 - total flux cleaned = 0.0160742 Jy ! Component: 2950 - total flux cleaned = 0.0162285 Jy ! Component: 3000 - total flux cleaned = 0.0164155 Jy ! Component: 3050 - total flux cleaned = 0.0165727 Jy ! Component: 3100 - total flux cleaned = 0.0167322 Jy ! Component: 3150 - total flux cleaned = 0.0167645 Jy ! Component: 3200 - total flux cleaned = 0.0167962 Jy ! Component: 3250 - total flux cleaned = 0.0167628 Jy ! Component: 3300 - total flux cleaned = 0.0167961 Jy ! Component: 3350 - total flux cleaned = 0.0167619 Jy ! Component: 3400 - total flux cleaned = 0.0167268 Jy ! Component: 3450 - total flux cleaned = 0.0167618 Jy ! Component: 3500 - total flux cleaned = 0.0167615 Jy ! Component: 3550 - total flux cleaned = 0.0167616 Jy ! Component: 3600 - total flux cleaned = 0.0167247 Jy ! Component: 3650 - total flux cleaned = 0.0166493 Jy ! Component: 3700 - total flux cleaned = 0.0166871 Jy ! Component: 3750 - total flux cleaned = 0.0166875 Jy ! Component: 3800 - total flux cleaned = 0.0166077 Jy ! Component: 3850 - total flux cleaned = 0.0166073 Jy ! Component: 3900 - total flux cleaned = 0.0165663 Jy ! Component: 3950 - total flux cleaned = 0.0165663 Jy ! Component: 4000 - total flux cleaned = 0.0165237 Jy ! Component: 4050 - total flux cleaned = 0.0165234 Jy ! Total flux subtracted in 4096 components = 0.0165681 Jy ! Clean residual min=-0.002389 max=0.002344 Jy/beam ! Clean residual mean=0.000008 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.119791 Jy keep ! Adding 196 model components to the UV plane model. ! The established model now contains 249 components and 0.119791 Jy ![Exited script file: muppet] wmap "J0031-3922_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.508 x 7.256 at -3.885 degrees (North through East) ! Clean map min=-0.0049439 max=0.088848 Jy/beam ! Writing clean map to FITS file: J0031-3922_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0888483 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000762343 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.57408 2.57408 5.14816 10.2963 20.5926 41.1853 82.3706 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.088 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.508 x 7.256 at -3.885 degrees (North through East) ! Clean map min=-0.0049439 max=0.088848 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0031-3922_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:39:08 2019