! Started logfile: J0030-4224_S_2017_01_21_pus_uvs.log on Sun May 5 15:42:56 2019 obs J0030-4224_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0030-4224_S_2017_01_21_pus_uva.fits ! AN table 1: 57 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.269493 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0030-4224 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 2212 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0030-4224_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 235 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 291 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.850132Jy sigma=0.004677 ! Fit after self-cal, rms=0.804333Jy sigma=0.004416 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.984 mas, bmaj=24.21 mas, bpa=1.12 degrees ! Estimated noise=5665.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.154262 Jy ! Component: 100 - total flux cleaned = 0.192326 Jy ! Total flux subtracted in 100 components = 0.192326 Jy ! Clean residual min=-0.015628 max=0.017168 Jy/beam ! Clean residual mean=0.000991 rms=0.005683 Jy/beam ! Combined flux in latest and established models = 0.192326 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.192326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130526Jy sigma=0.000705 ! Fit after self-cal, rms=0.130381Jy sigma=0.000705 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=27 mas, bpa=1.694 degrees ! Estimated noise=2912.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0232152 Jy ! Component: 100 - total flux cleaned = 0.0225756 Jy ! Component: 150 - total flux cleaned = 0.0202549 Jy ! Component: 200 - total flux cleaned = 0.0175886 Jy ! Total flux subtracted in 200 components = 0.0175886 Jy ! Clean residual min=-0.008693 max=0.008523 Jy/beam ! Clean residual mean=0.000737 rms=0.002865 Jy/beam ! Combined flux in latest and established models = 0.209914 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 71 components and 0.209914 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125253Jy sigma=0.000679 ! Fit after self-cal, rms=0.124975Jy sigma=0.000678 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.18 HN 1.00* LA 1.00 ! MK 1.09 NL 1.00* OV 1.04 PT 1.01 ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.13 HN 1.00* LA 0.95 ! MK 0.78 NL 1.00* OV 1.04 PT 0.98 ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.00* LA 0.90 ! MK 1.29 NL 1.00* OV 1.02 PT 0.93 ! SC 1.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* LA 1.00* ! MK 0.90 NL 1.00* OV 1.03 PT 0.96 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.124975Jy sigma=0.000678 ! Fit after self-cal, rms=0.127526Jy sigma=0.000662 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.323 mas, bmaj=27.42 mas, bpa=1.626 degrees ! Estimated noise=2909.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0045348 Jy ! Component: 100 - total flux cleaned = 0.00542673 Jy ! Component: 150 - total flux cleaned = 0.00583716 Jy ! Component: 200 - total flux cleaned = 0.0058491 Jy ! Total flux subtracted in 200 components = 0.0058491 Jy ! Clean residual min=-0.002792 max=0.002821 Jy/beam ! Clean residual mean=0.000014 rms=0.001049 Jy/beam ! Combined flux in latest and established models = 0.215763 Jy ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 139 components and 0.215763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126794Jy sigma=0.000658 ! Fit after self-cal, rms=0.126918Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126918Jy sigma=0.000657 ! Fit after self-cal, rms=0.133791Jy sigma=0.000659 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.333 mas, bmaj=27.42 mas, bpa=1.565 degrees ! Estimated noise=2979.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00231162 Jy ! Component: 100 - total flux cleaned = 0.00208026 Jy ! Component: 150 - total flux cleaned = 0.00226122 Jy ! Component: 200 - total flux cleaned = 0.0020961 Jy ! Total flux subtracted in 200 components = 0.0020961 Jy ! Clean residual min=-0.002767 max=0.002740 Jy/beam ! Clean residual mean=-0.000040 rms=0.001059 Jy/beam ! Combined flux in latest and established models = 0.217859 Jy selfcal ! Performing phase self-cal ! Adding 96 model components to the UV plane model. ! The established model now contains 234 components and 0.217859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133077Jy sigma=0.000657 ! Fit after self-cal, rms=0.133141Jy sigma=0.000657 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105088 Jy ! Component: 100 - total flux cleaned = -0.00191162 Jy ! Component: 150 - total flux cleaned = -0.00244 Jy ! Component: 200 - total flux cleaned = -0.00269073 Jy ! Total flux subtracted in 200 components = -0.00269073 Jy ! Clean residual min=-0.002002 max=0.001991 Jy/beam ! Clean residual mean=0.000001 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.215169 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 297 components and 0.215169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132852Jy sigma=0.000655 ! Fit after self-cal, rms=0.132779Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132779Jy sigma=0.000655 ! Fit after self-cal, rms=0.137651Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.331 mas, bmaj=27.46 mas, bpa=1.518 degrees ! Estimated noise=3037.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101697 Jy ! Component: 100 - total flux cleaned = 0.00139114 Jy ! Component: 150 - total flux cleaned = 0.00237016 Jy ! Component: 200 - total flux cleaned = 0.0037605 Jy ! Total flux subtracted in 200 components = 0.0037605 Jy ! Clean residual min=-0.002489 max=0.002501 Jy/beam ! Clean residual mean=-0.000001 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.218929 Jy selfcal ! Performing phase self-cal ! Adding 81 model components to the UV plane model. ! The established model now contains 349 components and 0.218929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.137063Jy sigma=0.000655 ! Fit after self-cal, rms=0.137075Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000518411 Jy ! Component: 100 - total flux cleaned = -0.00223479 Jy ! Component: 150 - total flux cleaned = -0.00312529 Jy ! Component: 200 - total flux cleaned = -0.00354926 Jy ! Total flux subtracted in 200 components = -0.00354926 Jy ! Clean residual min=-0.001731 max=0.001711 Jy/beam ! Clean residual mean=-0.000011 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.21538 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 391 components and 0.21538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136845Jy sigma=0.000654 ! Fit after self-cal, rms=0.136777Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136777Jy sigma=0.000654 ! Fit after self-cal, rms=0.141423Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.177 mas, bmaj=30.52 mas, bpa=11.83 degrees ! Estimated noise=4016.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000242636 Jy ! Component: 100 - total flux cleaned = -0.000417474 Jy ! Component: 150 - total flux cleaned = 0.000120797 Jy ! Component: 200 - total flux cleaned = 0.0011231 Jy ! Total flux subtracted in 200 components = 0.0011231 Jy ! Clean residual min=-0.002066 max=0.002075 Jy/beam ! Clean residual mean=0.000049 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.216503 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 431 components and 0.216503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.141041Jy sigma=0.000654 ! Fit after self-cal, rms=0.141058Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166978 Jy ! Component: 100 - total flux cleaned = 0.00258881 Jy ! Component: 150 - total flux cleaned = 0.00307842 Jy ! Component: 200 - total flux cleaned = 0.00351379 Jy ! Total flux subtracted in 200 components = 0.00351379 Jy ! Clean residual min=-0.000759 max=0.000771 Jy/beam ! Clean residual mean=-0.000009 rms=0.000264 Jy/beam ! Combined flux in latest and established models = 0.220017 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 470 components and 0.220017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140951Jy sigma=0.000653 ! Fit after self-cal, rms=0.140927Jy sigma=0.000653 ! Inverting map ! Added new window around map position (-127.5, 107.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000413161 Jy ! Component: 100 - total flux cleaned = 0.000611082 Jy ! Component: 150 - total flux cleaned = 0.000678686 Jy ! Component: 200 - total flux cleaned = 0.000712374 Jy ! Total flux subtracted in 200 components = 0.000712374 Jy ! Clean residual min=-0.000909 max=0.000796 Jy/beam ! Clean residual mean=0.000018 rms=0.000272 Jy/beam ! Combined flux in latest and established models = 0.220729 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 495 components and 0.220729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140896Jy sigma=0.000653 ! Fit after self-cal, rms=0.140879Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=27.5 mas, bpa=1.461 degrees ! Estimated noise=3090.13 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 27.5 at 1.461 degrees (North through East) ! Clean map min=-0.012969 max=0.18143 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=25.09 mas, bpa=0.8931 degrees ! Estimated noise=6223.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0537647 Jy ! Component: 100 - total flux cleaned = -0.0939592 Jy ! Component: 150 - total flux cleaned = -0.127632 Jy ! Component: 200 - total flux cleaned = -0.154027 Jy ! Total flux subtracted in 200 components = -0.154027 Jy ! Clean residual min=-0.056692 max=0.175978 Jy/beam ! Clean residual mean=0.002180 rms=0.034444 Jy/beam ! Combined flux in latest and established models = -0.154027 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 26 model components to the UV plane model. ! The established model now contains 26 components and -0.154027 Jy ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=27.5 mas, bpa=1.461 degrees ! Estimated noise=3090.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, -0.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.150362 Jy ! Component: 100 - total flux cleaned = 0.183892 Jy ! Component: 150 - total flux cleaned = 0.210659 Jy ! Component: 200 - total flux cleaned = 0.228961 Jy ! Total flux subtracted in 200 components = 0.228961 Jy ! Clean residual min=-0.025781 max=0.024328 Jy/beam ! Clean residual mean=-0.000896 rms=0.009285 Jy/beam ! Combined flux in latest and established models = 0.0749342 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 58 components and 0.0749342 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.177 mas, bmaj=30.52 mas, bpa=11.83 degrees ! Estimated noise=4016.01 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00578276 Jy ! Component: 100 - total flux cleaned = 0.0170122 Jy ! Component: 150 - total flux cleaned = 0.0297168 Jy ! Component: 200 - total flux cleaned = 0.0416252 Jy ! Total flux subtracted in 200 components = 0.0416252 Jy ! Clean residual min=-0.025293 max=0.014459 Jy/beam ! Clean residual mean=-0.000587 rms=0.007844 Jy/beam ! Combined flux in latest and established models = 0.116559 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00991427 Jy ! Component: 100 - total flux cleaned = 0.0185755 Jy ! Component: 150 - total flux cleaned = 0.0258812 Jy ! Component: 200 - total flux cleaned = 0.032299 Jy ! Total flux subtracted in 200 components = 0.032299 Jy ! Clean residual min=-0.023958 max=0.012438 Jy/beam ! Clean residual mean=-0.000452 rms=0.006204 Jy/beam ! Combined flux in latest and established models = 0.148858 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 102 components and 0.148858 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=27.5 mas, bpa=1.461 degrees ! Estimated noise=3090.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190149 Jy ! Component: 100 - total flux cleaned = 0.00452757 Jy ! Component: 150 - total flux cleaned = 0.00945892 Jy ! Component: 200 - total flux cleaned = 0.0144751 Jy ! Total flux subtracted in 200 components = 0.0144751 Jy ! Clean residual min=-0.018691 max=0.009572 Jy/beam ! Clean residual mean=0.000036 rms=0.004024 Jy/beam ! Combined flux in latest and established models = 0.163333 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 137 components and 0.163333 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.144314Jy sigma=0.000670 ! Fit after self-cal, rms=0.144193Jy sigma=0.000667 wmodel J0030-4224_S_2017_01_21_pus_map.mod ! Writing 137 model components to file: J0030-4224_S_2017_01_21_pus_map.mod wobs J0030-4224_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0030-4224_S_2017_01_21_pus_uvs.fits wwins J0030-4224_S_2017_01_21_pus_map.win ! wwins: Wrote 2 windows to J0030-4224_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00582976 Jy ! Component: 100 - total flux cleaned = -0.00789137 Jy ! Component: 150 - total flux cleaned = -0.00844744 Jy ! Component: 200 - total flux cleaned = -0.00879849 Jy ! Component: 250 - total flux cleaned = -0.00924215 Jy ! Component: 300 - total flux cleaned = -0.00884009 Jy ! Component: 350 - total flux cleaned = -0.00874177 Jy ! Component: 400 - total flux cleaned = -0.00855898 Jy ! Component: 450 - total flux cleaned = -0.00830305 Jy ! Component: 500 - total flux cleaned = -0.00813905 Jy ! Component: 550 - total flux cleaned = -0.00774971 Jy ! Component: 600 - total flux cleaned = -0.00700095 Jy ! Component: 650 - total flux cleaned = -0.00634479 Jy ! Component: 700 - total flux cleaned = -0.005565 Jy ! Component: 750 - total flux cleaned = -0.00473814 Jy ! Component: 800 - total flux cleaned = -0.00399667 Jy ! Component: 850 - total flux cleaned = -0.00320326 Jy ! Component: 900 - total flux cleaned = -0.00255444 Jy ! Component: 950 - total flux cleaned = -0.00191613 Jy ! Component: 1000 - total flux cleaned = -0.00128761 Jy ! Component: 1050 - total flux cleaned = -0.00103863 Jy ! Component: 1100 - total flux cleaned = -0.000669935 Jy ! Component: 1150 - total flux cleaned = -0.000243818 Jy ! Component: 1200 - total flux cleaned = 0.000243643 Jy ! Component: 1250 - total flux cleaned = 0.0007942 Jy ! Component: 1300 - total flux cleaned = 0.00146935 Jy ! Component: 1350 - total flux cleaned = 0.00208883 Jy ! Component: 1400 - total flux cleaned = 0.00265198 Jy ! Component: 1450 - total flux cleaned = 0.00328624 Jy ! Component: 1500 - total flux cleaned = 0.00380045 Jy ! Component: 1550 - total flux cleaned = 0.00432138 Jy ! Component: 1600 - total flux cleaned = 0.00498164 Jy ! Component: 1650 - total flux cleaned = 0.00538344 Jy ! Component: 1700 - total flux cleaned = 0.00579213 Jy ! Component: 1750 - total flux cleaned = 0.00613696 Jy ! Component: 1800 - total flux cleaned = 0.00649005 Jy ! Component: 1850 - total flux cleaned = 0.0068518 Jy ! Component: 1900 - total flux cleaned = 0.0071485 Jy ! Component: 1950 - total flux cleaned = 0.00745122 Jy ! Component: 2000 - total flux cleaned = 0.00776265 Jy ! Component: 2050 - total flux cleaned = 0.00800193 Jy ! Component: 2100 - total flux cleaned = 0.00833022 Jy ! Component: 2150 - total flux cleaned = 0.00858372 Jy ! Component: 2200 - total flux cleaned = 0.00893139 Jy ! Component: 2250 - total flux cleaned = 0.00919956 Jy ! Component: 2300 - total flux cleaned = 0.00947587 Jy ! Component: 2350 - total flux cleaned = 0.00966839 Jy ! Component: 2400 - total flux cleaned = 0.00976822 Jy ! Component: 2450 - total flux cleaned = 0.00987159 Jy ! Component: 2500 - total flux cleaned = 0.00997669 Jy ! Component: 2550 - total flux cleaned = 0.0101962 Jy ! Component: 2600 - total flux cleaned = 0.0103108 Jy ! Component: 2650 - total flux cleaned = 0.0104281 Jy ! Component: 2700 - total flux cleaned = 0.010552 Jy ! Component: 2750 - total flux cleaned = 0.0106804 Jy ! Component: 2800 - total flux cleaned = 0.0109482 Jy ! Component: 2850 - total flux cleaned = 0.0110891 Jy ! Component: 2900 - total flux cleaned = 0.0112346 Jy ! Component: 2950 - total flux cleaned = 0.0112347 Jy ! Component: 3000 - total flux cleaned = 0.0115458 Jy ! Component: 3050 - total flux cleaned = 0.0117064 Jy ! Component: 3100 - total flux cleaned = 0.0118752 Jy ! Component: 3150 - total flux cleaned = 0.0118786 Jy ! Component: 3200 - total flux cleaned = 0.0120586 Jy ! Component: 3250 - total flux cleaned = 0.0122476 Jy ! Component: 3300 - total flux cleaned = 0.0124453 Jy ! Component: 3350 - total flux cleaned = 0.0124449 Jy ! Component: 3400 - total flux cleaned = 0.0126529 Jy ! Component: 3450 - total flux cleaned = 0.0128721 Jy ! Component: 3500 - total flux cleaned = 0.0130997 Jy ! Component: 3550 - total flux cleaned = 0.0133413 Jy ! Component: 3600 - total flux cleaned = 0.0133395 Jy ! Component: 3650 - total flux cleaned = 0.0135934 Jy ! Component: 3700 - total flux cleaned = 0.0138617 Jy ! Component: 3750 - total flux cleaned = 0.013858 Jy ! Component: 3800 - total flux cleaned = 0.0141418 Jy ! Component: 3850 - total flux cleaned = 0.014438 Jy ! Component: 3900 - total flux cleaned = 0.0147468 Jy ! Component: 3950 - total flux cleaned = 0.0147445 Jy ! Component: 4000 - total flux cleaned = 0.015083 Jy ! Component: 4050 - total flux cleaned = 0.0154339 Jy ! Total flux subtracted in 4096 components = 0.015801 Jy ! Clean residual min=-0.019969 max=0.021136 Jy/beam ! Clean residual mean=0.000908 rms=0.005541 Jy/beam ! Combined flux in latest and established models = 0.179134 Jy keep ! Adding 156 model components to the UV plane model. ! The established model now contains 293 components and 0.179134 Jy ![Exited script file: muppet] wmap "J0030-4224_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 27.5 at 1.461 degrees (North through East) ! Clean map min=-0.04661 max=0.20267 Jy/beam ! Writing clean map to FITS file: J0030-4224_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.20267 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00709443 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -10.5015 10.5015 21.0029 42.0059 84.0117 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0212 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.202 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 27.5 at 1.461 degrees (North through East) ! Clean map min=-0.04661 max=0.20267 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0030-4224_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:43:01 2019