! Started logfile: J0030-4224_S_2017_01_16_pus_uvs.log on Sun Apr 7 15:01:18 2019 obs J0030-4224_S_2017_01_16_pus_uva.fits ! Reading UV FITS file: J0030-4224_S_2017_01_16_pus_uva.fits ! AN table 1: 58 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.457854 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0030-4224 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 622 lines of history. ! ! Reading 4780 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0030-4224_S_2017_01_16_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.791253Jy sigma=0.004192 ! Fit after self-cal, rms=0.765806Jy sigma=0.004070 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.908 mas, bmaj=27.29 mas, bpa=13.85 degrees ! Estimated noise=4734.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.192287 Jy ! Component: 100 - total flux cleaned = 0.241614 Jy ! Total flux subtracted in 100 components = 0.241614 Jy ! Clean residual min=-0.017697 max=0.028491 Jy/beam ! Clean residual mean=0.000103 rms=0.006468 Jy/beam ! Combined flux in latest and established models = 0.241614 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.241614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270522Jy sigma=0.000716 ! Fit after self-cal, rms=0.270580Jy sigma=0.000715 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.762 mas, bmaj=27.67 mas, bpa=13.07 degrees ! Estimated noise=2065.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0389207 Jy ! Component: 100 - total flux cleaned = 0.0614132 Jy ! Component: 150 - total flux cleaned = 0.0754241 Jy ! Component: 200 - total flux cleaned = 0.0844531 Jy ! Total flux subtracted in 200 components = 0.0844531 Jy ! Clean residual min=-0.011338 max=0.011884 Jy/beam ! Clean residual mean=-0.000203 rms=0.003463 Jy/beam ! Combined flux in latest and established models = 0.326067 Jy ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 99 components and 0.326067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.259792Jy sigma=0.000664 ! Fit after self-cal, rms=0.259751Jy sigma=0.000664 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 1.07 ! LA 1.06 MK 1.00* NL 1.01 OV 1.02 ! PT 0.94 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.08 HN 1.00* KP 1.00 ! LA 1.01 MK 1.00* NL 1.12 OV 1.05 ! PT 0.91 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.07 HN 1.00* KP 1.04 ! LA 1.05 MK 1.00* NL 1.07 OV 0.97 ! PT 0.92 SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.09 HN 1.00* KP 0.67 ! LA 0.55 MK 1.00* NL 1.00* OV 1.05 ! PT 0.95 SC 0.94 ! ! ! Fit before self-cal, rms=0.259751Jy sigma=0.000664 ! Fit after self-cal, rms=0.162080Jy sigma=0.000641 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.784 mas, bmaj=28.34 mas, bpa=13.13 degrees ! Estimated noise=2066.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000832346 Jy ! Component: 100 - total flux cleaned = 0.00100241 Jy ! Component: 150 - total flux cleaned = 0.00115837 Jy ! Component: 200 - total flux cleaned = 0.00122806 Jy ! Total flux subtracted in 200 components = 0.00122806 Jy ! Clean residual min=-0.007345 max=0.006320 Jy/beam ! Clean residual mean=-0.000058 rms=0.001922 Jy/beam ! Combined flux in latest and established models = 0.327296 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 117 components and 0.327296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161959Jy sigma=0.000640 ! Fit after self-cal, rms=0.161402Jy sigma=0.000640 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161402Jy sigma=0.000640 ! Fit after self-cal, rms=0.161787Jy sigma=0.000640 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.778 mas, bmaj=28.45 mas, bpa=13.16 degrees ! Estimated noise=2077.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000865858 Jy ! Component: 100 - total flux cleaned = 0.000935606 Jy ! Component: 150 - total flux cleaned = 0.00100372 Jy ! Component: 200 - total flux cleaned = 0.00113228 Jy ! Total flux subtracted in 200 components = 0.00113228 Jy ! Clean residual min=-0.007087 max=0.006247 Jy/beam ! Clean residual mean=-0.000053 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 0.328428 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 121 components and 0.328428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161677Jy sigma=0.000639 ! Fit after self-cal, rms=0.161657Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000361125 Jy ! Component: 100 - total flux cleaned = 0.000361452 Jy ! Component: 150 - total flux cleaned = 0.00036112 Jy ! Component: 200 - total flux cleaned = 0.000463348 Jy ! Total flux subtracted in 200 components = 0.000463348 Jy ! Clean residual min=-0.006961 max=0.006102 Jy/beam ! Clean residual mean=-0.000052 rms=0.001822 Jy/beam ! Combined flux in latest and established models = 0.328891 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 124 components and 0.328891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161614Jy sigma=0.000639 ! Fit after self-cal, rms=0.161606Jy sigma=0.000639 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.161606Jy sigma=0.000639 ! Fit after self-cal, rms=0.162876Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.77 mas, bmaj=28.59 mas, bpa=13.18 degrees ! Estimated noise=2091.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000930323 Jy ! Component: 100 - total flux cleaned = 0.000798382 Jy ! Component: 150 - total flux cleaned = 0.000854271 Jy ! Component: 200 - total flux cleaned = 0.00095994 Jy ! Total flux subtracted in 200 components = 0.00095994 Jy ! Clean residual min=-0.006728 max=0.006127 Jy/beam ! Clean residual mean=-0.000047 rms=0.001767 Jy/beam ! Combined flux in latest and established models = 0.329851 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 125 components and 0.329851 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162783Jy sigma=0.000639 ! Fit after self-cal, rms=0.162781Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000231561 Jy ! Component: 100 - total flux cleaned = 0.000331573 Jy ! Component: 150 - total flux cleaned = 0.00033186 Jy ! Component: 200 - total flux cleaned = 0.00041307 Jy ! Total flux subtracted in 200 components = 0.00041307 Jy ! Clean residual min=-0.006656 max=0.005991 Jy/beam ! Clean residual mean=-0.000046 rms=0.001739 Jy/beam ! Combined flux in latest and established models = 0.330264 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 128 components and 0.330264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162750Jy sigma=0.000639 ! Fit after self-cal, rms=0.162745Jy sigma=0.000639 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162745Jy sigma=0.000639 ! Fit after self-cal, rms=0.164101Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.582 mas, bmaj=41.18 mas, bpa=0.8282 degrees ! Estimated noise=2431.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000916911 Jy ! Component: 100 - total flux cleaned = 0.00114671 Jy ! Component: 150 - total flux cleaned = 0.00114585 Jy ! Component: 200 - total flux cleaned = 0.0011805 Jy ! Total flux subtracted in 200 components = 0.0011805 Jy ! Clean residual min=-0.007455 max=0.006316 Jy/beam ! Clean residual mean=-0.000059 rms=0.002160 Jy/beam ! Combined flux in latest and established models = 0.331445 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 142 components and 0.331445 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164029Jy sigma=0.000638 ! Fit after self-cal, rms=0.164025Jy sigma=0.000638 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.72474e-05 Jy ! Component: 100 - total flux cleaned = 4.90217e-05 Jy ! Component: 150 - total flux cleaned = 0.000115022 Jy ! Component: 200 - total flux cleaned = 0.000143263 Jy ! Total flux subtracted in 200 components = 0.000143263 Jy ! Clean residual min=-0.007393 max=0.006248 Jy/beam ! Clean residual mean=-0.000058 rms=0.002135 Jy/beam ! Combined flux in latest and established models = 0.331588 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 143 components and 0.331588 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164017Jy sigma=0.000638 ! Fit after self-cal, rms=0.164009Jy sigma=0.000638 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.763 mas, bmaj=28.73 mas, bpa=13.21 degrees ! Estimated noise=2104.74 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.763 x 28.73 at 13.21 degrees (North through East) ! Clean map min=-0.0061621 max=0.23234 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.877 mas, bmaj=28.44 mas, bpa=13.96 degrees ! Estimated noise=4871.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.197825 Jy ! Component: 100 - total flux cleaned = 0.245235 Jy ! Component: 150 - total flux cleaned = 0.27002 Jy ! Component: 200 - total flux cleaned = 0.286695 Jy ! Total flux subtracted in 200 components = 0.286695 Jy ! Clean residual min=-0.010500 max=0.014629 Jy/beam ! Clean residual mean=0.000056 rms=0.003541 Jy/beam ! Combined flux in latest and established models = 0.286695 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.286695 Jy ! Inverting map and beam ! Estimated beam: bmin=3.763 mas, bmaj=28.73 mas, bpa=13.21 degrees ! Estimated noise=2104.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0173665 Jy ! Component: 100 - total flux cleaned = 0.0272135 Jy ! Component: 150 - total flux cleaned = 0.0333625 Jy ! Component: 200 - total flux cleaned = 0.037402 Jy ! Total flux subtracted in 200 components = 0.037402 Jy ! Clean residual min=-0.006262 max=0.006947 Jy/beam ! Clean residual mean=-0.000055 rms=0.001894 Jy/beam ! Combined flux in latest and established models = 0.324097 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 105 components and 0.324097 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.582 mas, bmaj=41.18 mas, bpa=0.8282 degrees ! Estimated noise=2431.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00361689 Jy ! Component: 100 - total flux cleaned = 0.00495862 Jy ! Component: 150 - total flux cleaned = 0.00519764 Jy ! Component: 200 - total flux cleaned = 0.00536637 Jy ! Total flux subtracted in 200 components = 0.00536637 Jy ! Clean residual min=-0.007324 max=0.007858 Jy/beam ! Clean residual mean=-0.000071 rms=0.002341 Jy/beam ! Combined flux in latest and established models = 0.329463 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156152 Jy ! Component: 100 - total flux cleaned = 0.000203176 Jy ! Component: 150 - total flux cleaned = 0.000295853 Jy ! Component: 200 - total flux cleaned = 0.000386061 Jy ! Total flux subtracted in 200 components = 0.000386061 Jy ! Clean residual min=-0.007293 max=0.007616 Jy/beam ! Clean residual mean=-0.000069 rms=0.002294 Jy/beam ! Combined flux in latest and established models = 0.329849 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 139 components and 0.329849 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.763 mas, bmaj=28.73 mas, bpa=13.21 degrees ! Estimated noise=2104.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000212353 Jy ! Component: 100 - total flux cleaned = -2.12082e-06 Jy ! Component: 150 - total flux cleaned = 0.000135773 Jy ! Component: 200 - total flux cleaned = 0.000256088 Jy ! Total flux subtracted in 200 components = 0.000256088 Jy ! Clean residual min=-0.006383 max=0.006744 Jy/beam ! Clean residual mean=-0.000045 rms=0.001750 Jy/beam ! Combined flux in latest and established models = 0.330105 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 160 components and 0.330105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164070Jy sigma=0.000639 ! Fit after self-cal, rms=0.164050Jy sigma=0.000638 wmodel J0030-4224_S_2017_01_16_pus_map.mod ! Writing 160 model components to file: J0030-4224_S_2017_01_16_pus_map.mod wobs J0030-4224_S_2017_01_16_pus_uvs.fits ! Writing UV FITS file: J0030-4224_S_2017_01_16_pus_uvs.fits wwins J0030-4224_S_2017_01_16_pus_map.win ! wwins: Wrote 1 windows to J0030-4224_S_2017_01_16_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403412 Jy ! Component: 100 - total flux cleaned = -0.00107168 Jy ! Component: 150 - total flux cleaned = -0.00190203 Jy ! Component: 200 - total flux cleaned = -0.00235452 Jy ! Component: 250 - total flux cleaned = -0.00256007 Jy ! Component: 300 - total flux cleaned = -0.00288307 Jy ! Component: 350 - total flux cleaned = -0.00324605 Jy ! Component: 400 - total flux cleaned = -0.00364284 Jy ! Component: 450 - total flux cleaned = -0.00369691 Jy ! Component: 500 - total flux cleaned = -0.00375034 Jy ! Component: 550 - total flux cleaned = -0.00360124 Jy ! Component: 600 - total flux cleaned = -0.00340936 Jy ! Component: 650 - total flux cleaned = -0.00317909 Jy ! Component: 700 - total flux cleaned = -0.00299935 Jy ! Component: 750 - total flux cleaned = -0.00286714 Jy ! Component: 800 - total flux cleaned = -0.00286711 Jy ! Component: 850 - total flux cleaned = -0.00286665 Jy ! Component: 900 - total flux cleaned = -0.00290646 Jy ! Component: 950 - total flux cleaned = -0.00282748 Jy ! Component: 1000 - total flux cleaned = -0.00286599 Jy ! Component: 1050 - total flux cleaned = -0.00282799 Jy ! Component: 1100 - total flux cleaned = -0.00282804 Jy ! Component: 1150 - total flux cleaned = -0.00293931 Jy ! Component: 1200 - total flux cleaned = -0.00290314 Jy ! Component: 1250 - total flux cleaned = -0.0029395 Jy ! Component: 1300 - total flux cleaned = -0.00297485 Jy ! Component: 1350 - total flux cleaned = -0.00297495 Jy ! Component: 1400 - total flux cleaned = -0.00301026 Jy ! Component: 1450 - total flux cleaned = -0.00304535 Jy ! Component: 1500 - total flux cleaned = -0.00304568 Jy ! Component: 1550 - total flux cleaned = -0.00304565 Jy ! Component: 1600 - total flux cleaned = -0.00294248 Jy ! Component: 1650 - total flux cleaned = -0.00283962 Jy ! Component: 1700 - total flux cleaned = -0.00266776 Jy ! Component: 1750 - total flux cleaned = -0.00259873 Jy ! Component: 1800 - total flux cleaned = -0.00242627 Jy ! Component: 1850 - total flux cleaned = -0.00239152 Jy ! Component: 1900 - total flux cleaned = -0.00228749 Jy ! Component: 1950 - total flux cleaned = -0.00211371 Jy ! Component: 2000 - total flux cleaned = -0.00197415 Jy ! Component: 2050 - total flux cleaned = -0.00183384 Jy ! Component: 2100 - total flux cleaned = -0.00179822 Jy ! Component: 2150 - total flux cleaned = -0.0016922 Jy ! Component: 2200 - total flux cleaned = -0.00165616 Jy ! Component: 2250 - total flux cleaned = -0.00162009 Jy ! Component: 2300 - total flux cleaned = -0.00158382 Jy ! Component: 2350 - total flux cleaned = -0.00154759 Jy ! Component: 2400 - total flux cleaned = -0.00154731 Jy ! Component: 2450 - total flux cleaned = -0.00151039 Jy ! Component: 2500 - total flux cleaned = -0.0015101 Jy ! Component: 2550 - total flux cleaned = -0.00147235 Jy ! Component: 2600 - total flux cleaned = -0.00154754 Jy ! Component: 2650 - total flux cleaned = -0.00150979 Jy ! Component: 2700 - total flux cleaned = -0.00154808 Jy ! Component: 2750 - total flux cleaned = -0.00158724 Jy ! Component: 2800 - total flux cleaned = -0.00170542 Jy ! Component: 2850 - total flux cleaned = -0.00174573 Jy ! Component: 2900 - total flux cleaned = -0.00182696 Jy ! Component: 2950 - total flux cleaned = -0.00190938 Jy ! Component: 3000 - total flux cleaned = -0.00195162 Jy ! Component: 3050 - total flux cleaned = -0.002036 Jy ! Component: 3100 - total flux cleaned = -0.0021219 Jy ! Component: 3150 - total flux cleaned = -0.00216547 Jy ! Component: 3200 - total flux cleaned = -0.00229917 Jy ! Component: 3250 - total flux cleaned = -0.00243428 Jy ! Component: 3300 - total flux cleaned = -0.00248046 Jy ! Component: 3350 - total flux cleaned = -0.00257357 Jy ! Component: 3400 - total flux cleaned = -0.00262131 Jy ! Component: 3450 - total flux cleaned = -0.00271733 Jy ! Component: 3500 - total flux cleaned = -0.00276653 Jy ! Component: 3550 - total flux cleaned = -0.00281581 Jy ! Component: 3600 - total flux cleaned = -0.00286652 Jy ! Component: 3650 - total flux cleaned = -0.00291777 Jy ! Component: 3700 - total flux cleaned = -0.00296991 Jy ! Component: 3750 - total flux cleaned = -0.00302249 Jy ! Component: 3800 - total flux cleaned = -0.00307622 Jy ! Component: 3850 - total flux cleaned = -0.00318658 Jy ! Component: 3900 - total flux cleaned = -0.00324303 Jy ! Component: 3950 - total flux cleaned = -0.00324321 Jy ! Component: 4000 - total flux cleaned = -0.0033021 Jy ! Component: 4050 - total flux cleaned = -0.00330155 Jy ! Total flux subtracted in 4096 components = -0.00342232 Jy ! Clean residual min=-0.003269 max=0.004173 Jy/beam ! Clean residual mean=0.000028 rms=0.001190 Jy/beam ! Combined flux in latest and established models = 0.326683 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 447 components and 0.326683 Jy ![Exited script file: muppet] wmap "J0030-4224_S_2017_01_16_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.763 x 28.73 at 13.21 degrees (North through East) ! Clean map min=-0.0079824 max=0.24992 Jy/beam ! Writing clean map to FITS file: J0030-4224_S_2017_01_16_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.24992 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00127799 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.53408 1.53408 3.06815 6.1363 12.2726 24.5452 49.0904 98.1808 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0038 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.249 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.763 x 28.73 at 13.21 degrees (North through East) ! Clean map min=-0.0079824 max=0.24992 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0030-4224_S_2017_01_16_pus_uvs.log closed on Sun Apr 7 15:01:23 2019