! Started logfile: J0029-0113_X_2017_05_01_pus_uvs.log on Wed May 1 19:49:56 2019 obs J0029-0113_X_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0029-0113_X_2017_05_01_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.945833 visibilities/baseline/integration-bin. ! Found source: J0029-0113 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 863 lines of history. ! ! Reading 49032 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0029-0113_X_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 28 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.899673Jy sigma=0.007876 ! Fit after self-cal, rms=0.891686Jy sigma=0.007817 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7595 mas, bmaj=1.858 mas, bpa=2.492 degrees ! Estimated noise=786.072 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0809872 Jy ! Component: 100 - total flux cleaned = 0.106567 Jy ! Total flux subtracted in 100 components = 0.106567 Jy ! Clean residual min=-0.005760 max=0.012805 Jy/beam ! Clean residual mean=-0.000033 rms=0.001757 Jy/beam ! Combined flux in latest and established models = 0.106567 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.106567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.088326Jy sigma=0.000702 ! Fit after self-cal, rms=0.088278Jy sigma=0.000702 ! Inverting map ! Added new window around map position (1, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0147842 Jy ! Component: 100 - total flux cleaned = 0.0236168 Jy ! Total flux subtracted in 100 components = 0.0236168 Jy ! Clean residual min=-0.004072 max=0.007438 Jy/beam ! Clean residual mean=-0.000019 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.130184 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.130184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.084930Jy sigma=0.000669 ! Fit after self-cal, rms=0.084855Jy sigma=0.000668 ! Inverting map ! Added new window around map position (3, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00764326 Jy ! Component: 100 - total flux cleaned = 0.0125537 Jy ! Total flux subtracted in 100 components = 0.0125537 Jy ! Clean residual min=-0.003205 max=0.004002 Jy/beam ! Clean residual mean=-0.000013 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.142738 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 30 components and 0.142738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083936Jy sigma=0.000659 ! Fit after self-cal, rms=0.083878Jy sigma=0.000658 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9171 mas, bmaj=2.115 mas, bpa=5.571 degrees ! Estimated noise=382.221 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00619618 Jy ! Component: 100 - total flux cleaned = 0.00990146 Jy ! Component: 150 - total flux cleaned = 0.0115386 Jy ! Component: 200 - total flux cleaned = 0.0121534 Jy ! Total flux subtracted in 200 components = 0.0121534 Jy ! Clean residual min=-0.001864 max=0.003272 Jy/beam ! Clean residual mean=-0.000008 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 0.154891 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 47 components and 0.154891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.083390Jy sigma=0.000653 ! Fit after self-cal, rms=0.083324Jy sigma=0.000653 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.98 HN 1.01 KP 0.98 ! LA 0.94 MK 1.06 NL 1.00 OV 1.04 ! PT 0.98 SC 1.05 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.00 HN 0.96 KP 0.95 ! LA 0.94 MK 0.99 NL 1.04 OV 1.00 ! PT 1.06 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 1.02 KP 0.99 ! LA 0.99 MK 0.99 NL 1.00 OV 1.00 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.07 KP 0.99 ! LA 0.97 MK 1.05 NL 1.00 OV 1.00 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 0.95 KP 0.99 ! LA 0.95 MK 1.03 NL 1.07 OV 0.97 ! PT 1.01 SC 1.02 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.94 HN 1.00 KP 0.97 ! LA 0.97 MK 0.98 NL 1.06 OV 1.03 ! PT 1.00 SC 0.99 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00 KP 0.97 ! LA 0.96 MK 1.04 NL 1.03 OV 1.03 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 1.01 KP 0.98 ! LA 0.95 MK 1.02 NL 1.05 OV 1.01 ! PT 1.03 SC 1.01 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.97 HN 0.96 KP 0.97 ! LA 0.99 MK 0.99 NL 1.06 OV 1.02 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.98 HN 0.98 KP 0.96 ! LA 0.99 MK 0.99 NL 1.03 OV 1.01 ! PT 1.04 SC 0.95 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.11 KP 1.04 ! LA 1.01 MK 1.02 NL 1.15 OV 1.05 ! PT 1.10 SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 0.96 KP 0.92 ! LA 0.98 MK 0.91 NL 1.04 OV 1.04 ! PT 1.01 SC 1.02 ! ! ! Fit before self-cal, rms=0.083324Jy sigma=0.000653 ! Fit after self-cal, rms=0.082198Jy sigma=0.000650 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9202 mas, bmaj=2.118 mas, bpa=5.73 degrees ! Estimated noise=379.741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5.6, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00300729 Jy ! Component: 100 - total flux cleaned = 0.00473308 Jy ! Component: 150 - total flux cleaned = 0.00587775 Jy ! Component: 200 - total flux cleaned = 0.00670322 Jy ! Total flux subtracted in 200 components = 0.00670322 Jy ! Clean residual min=-0.001168 max=0.001310 Jy/beam ! Clean residual mean=0.000000 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.161594 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 78 components and 0.161594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082084Jy sigma=0.000649 ! Fit after self-cal, rms=0.082076Jy sigma=0.000649 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082076Jy sigma=0.000649 ! Fit after self-cal, rms=0.079044Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.92 mas, bmaj=2.118 mas, bpa=5.715 degrees ! Estimated noise=380.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000956989 Jy ! Component: 100 - total flux cleaned = 0.00136004 Jy ! Component: 150 - total flux cleaned = 0.00165688 Jy ! Component: 200 - total flux cleaned = 0.00180001 Jy ! Total flux subtracted in 200 components = 0.00180001 Jy ! Clean residual min=-0.000988 max=0.001110 Jy/beam ! Clean residual mean=0.000001 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.163394 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 96 components and 0.163394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079026Jy sigma=0.000648 ! Fit after self-cal, rms=0.079033Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.2, 5.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106152 Jy ! Component: 100 - total flux cleaned = 0.00155309 Jy ! Component: 150 - total flux cleaned = 0.00163531 Jy ! Component: 200 - total flux cleaned = 0.00172864 Jy ! Total flux subtracted in 200 components = 0.00172864 Jy ! Clean residual min=-0.000901 max=0.000933 Jy/beam ! Clean residual mean=0.000001 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.165123 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 114 components and 0.165123 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079015Jy sigma=0.000648 ! Fit after self-cal, rms=0.079014Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079014Jy sigma=0.000648 ! Fit after self-cal, rms=0.079005Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9197 mas, bmaj=2.117 mas, bpa=5.71 degrees ! Estimated noise=380.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000616084 Jy ! Component: 100 - total flux cleaned = 0.00083897 Jy ! Component: 150 - total flux cleaned = 0.000921166 Jy ! Component: 200 - total flux cleaned = 0.000996459 Jy ! Total flux subtracted in 200 components = 0.000996459 Jy ! Clean residual min=-0.000868 max=0.000880 Jy/beam ! Clean residual mean=0.000001 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.166119 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 124 components and 0.166119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078996Jy sigma=0.000648 ! Fit after self-cal, rms=0.078997Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222609 Jy ! Component: 100 - total flux cleaned = 0.000323536 Jy ! Component: 150 - total flux cleaned = 0.000389767 Jy ! Component: 200 - total flux cleaned = 0.000439219 Jy ! Total flux subtracted in 200 components = 0.000439219 Jy ! Clean residual min=-0.000845 max=0.000873 Jy/beam ! Clean residual mean=0.000001 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.166558 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 131 components and 0.166559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078992Jy sigma=0.000648 ! Fit after self-cal, rms=0.078992Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.078992Jy sigma=0.000648 ! Fit after self-cal, rms=0.079030Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.142 mas, bmaj=3.426 mas, bpa=1.8 degrees ! Estimated noise=472.465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00035272 Jy ! Component: 100 - total flux cleaned = 0.000503805 Jy ! Component: 150 - total flux cleaned = 0.000557811 Jy ! Component: 200 - total flux cleaned = 0.000634866 Jy ! Total flux subtracted in 200 components = 0.000634866 Jy ! Clean residual min=-0.000995 max=0.000996 Jy/beam ! Clean residual mean=0.000000 rms=0.000257 Jy/beam ! Combined flux in latest and established models = 0.167193 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 143 components and 0.167193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079028Jy sigma=0.000648 ! Fit after self-cal, rms=0.079027Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000135884 Jy ! Component: 100 - total flux cleaned = 0.000206141 Jy ! Component: 150 - total flux cleaned = 0.000259564 Jy ! Component: 200 - total flux cleaned = 0.000302033 Jy ! Total flux subtracted in 200 components = 0.000302033 Jy ! Clean residual min=-0.000977 max=0.000971 Jy/beam ! Clean residual mean=0.000000 rms=0.000253 Jy/beam ! Combined flux in latest and established models = 0.167495 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 152 components and 0.167495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079026Jy sigma=0.000648 ! Fit after self-cal, rms=0.079026Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9199 mas, bmaj=2.118 mas, bpa=5.734 degrees ! Estimated noise=380.464 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9199 x 2.118 at 5.734 degrees (North through East) ! Clean map min=-0.00076361 max=0.108 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7587 mas, bmaj=1.853 mas, bpa=2.355 degrees ! Estimated noise=777.692 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0797585 Jy ! Component: 100 - total flux cleaned = 0.10643 Jy ! Component: 150 - total flux cleaned = 0.121412 Jy ! Component: 200 - total flux cleaned = 0.131251 Jy ! Total flux subtracted in 200 components = 0.131251 Jy ! Clean residual min=-0.003731 max=0.005321 Jy/beam ! Clean residual mean=-0.000013 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.131251 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.131251 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9199 mas, bmaj=2.118 mas, bpa=5.734 degrees ! Estimated noise=380.464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00979011 Jy ! Component: 100 - total flux cleaned = 0.0159592 Jy ! Component: 150 - total flux cleaned = 0.0201827 Jy ! Component: 200 - total flux cleaned = 0.0233368 Jy ! Total flux subtracted in 200 components = 0.0233368 Jy ! Clean residual min=-0.001526 max=0.001853 Jy/beam ! Clean residual mean=-0.000006 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.154588 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 46 components and 0.154588 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.142 mas, bmaj=3.426 mas, bpa=1.8 degrees ! Estimated noise=472.465 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00389953 Jy ! Component: 100 - total flux cleaned = 0.00648728 Jy ! Component: 150 - total flux cleaned = 0.00826901 Jy ! Component: 200 - total flux cleaned = 0.00951397 Jy ! Total flux subtracted in 200 components = 0.00951397 Jy ! Clean residual min=-0.001146 max=0.001196 Jy/beam ! Clean residual mean=-0.000003 rms=0.000322 Jy/beam ! Combined flux in latest and established models = 0.164102 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00090443 Jy ! Component: 100 - total flux cleaned = 0.00160199 Jy ! Component: 150 - total flux cleaned = 0.00215357 Jy ! Component: 200 - total flux cleaned = 0.00253571 Jy ! Total flux subtracted in 200 components = 0.00253571 Jy ! Clean residual min=-0.001021 max=0.000945 Jy/beam ! Clean residual mean=-0.000002 rms=0.000263 Jy/beam ! Combined flux in latest and established models = 0.166638 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 107 components and 0.166638 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9199 mas, bmaj=2.118 mas, bpa=5.734 degrees ! Estimated noise=380.464 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.52276e-05 Jy ! Component: 100 - total flux cleaned = 0.000258152 Jy ! Component: 150 - total flux cleaned = 0.000358224 Jy ! Component: 200 - total flux cleaned = 0.0003956 Jy ! Total flux subtracted in 200 components = 0.0003956 Jy ! Clean residual min=-0.000936 max=0.000883 Jy/beam ! Clean residual mean=-0.000001 rms=0.000213 Jy/beam ! Combined flux in latest and established models = 0.167033 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 132 components and 0.167033 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079037Jy sigma=0.000648 ! Fit after self-cal, rms=0.079034Jy sigma=0.000648 wmodel J0029-0113_X_2017_05_01_pus_map.mod ! Writing 132 model components to file: J0029-0113_X_2017_05_01_pus_map.mod wobs J0029-0113_X_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0029-0113_X_2017_05_01_pus_uvs.fits wwins J0029-0113_X_2017_05_01_pus_map.win ! wwins: Wrote 6 windows to J0029-0113_X_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.83959e-05 Jy ! Component: 100 - total flux cleaned = 3.35972e-05 Jy ! Component: 150 - total flux cleaned = 0.000122767 Jy ! Component: 200 - total flux cleaned = 0.000195407 Jy ! Component: 250 - total flux cleaned = 0.000276804 Jy ! Component: 300 - total flux cleaned = 0.000356062 Jy ! Component: 350 - total flux cleaned = 0.000443899 Jy ! Component: 400 - total flux cleaned = 0.000529306 Jy ! Component: 450 - total flux cleaned = 0.000591887 Jy ! Component: 500 - total flux cleaned = 0.000632672 Jy ! Component: 550 - total flux cleaned = 0.000702194 Jy ! Component: 600 - total flux cleaned = 0.000731408 Jy ! Component: 650 - total flux cleaned = 0.000769515 Jy ! Component: 700 - total flux cleaned = 0.000825416 Jy ! Component: 750 - total flux cleaned = 0.000852932 Jy ! Component: 800 - total flux cleaned = 0.000915894 Jy ! Component: 850 - total flux cleaned = 0.000960034 Jy ! Component: 900 - total flux cleaned = 0.00102069 Jy ! Component: 950 - total flux cleaned = 0.00107182 Jy ! Component: 1000 - total flux cleaned = 0.00111387 Jy ! Component: 1050 - total flux cleaned = 0.00117995 Jy ! Component: 1100 - total flux cleaned = 0.00120419 Jy ! Component: 1150 - total flux cleaned = 0.00122828 Jy ! Component: 1200 - total flux cleaned = 0.0012519 Jy ! Component: 1250 - total flux cleaned = 0.00125197 Jy ! Component: 1300 - total flux cleaned = 0.00129821 Jy ! Component: 1350 - total flux cleaned = 0.00129836 Jy ! Component: 1400 - total flux cleaned = 0.00135073 Jy ! Component: 1450 - total flux cleaned = 0.00138016 Jy ! Component: 1500 - total flux cleaned = 0.00140212 Jy ! Component: 1550 - total flux cleaned = 0.00140931 Jy ! Component: 1600 - total flux cleaned = 0.00143791 Jy ! Component: 1650 - total flux cleaned = 0.00146607 Jy ! Component: 1700 - total flux cleaned = 0.00147295 Jy ! Component: 1750 - total flux cleaned = 0.00147972 Jy ! Component: 1800 - total flux cleaned = 0.00147973 Jy ! Component: 1850 - total flux cleaned = 0.0014931 Jy ! Component: 1900 - total flux cleaned = 0.00148637 Jy ! Component: 1950 - total flux cleaned = 0.00147982 Jy ! Component: 2000 - total flux cleaned = 0.0014732 Jy ! Total flux subtracted in 2048 components = 0.0014474 Jy ! Clean residual min=-0.000363 max=0.000360 Jy/beam ! Clean residual mean=-0.000001 rms=0.000121 Jy/beam ! Combined flux in latest and established models = 0.168481 Jy keep ! Adding 150 model components to the UV plane model. ! The established model now contains 282 components and 0.168481 Jy ![Exited script file: muppet] wmap "J0029-0113_X_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9199 x 2.118 at 5.734 degrees (North through East) ! Clean map min=-0.00063659 max=0.10779 Jy/beam ! Writing clean map to FITS file: J0029-0113_X_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107786 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000120493 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.335366 0.335366 0.670732 1.34146 2.68293 5.36585 10.7317 21.4634 42.9268 85.8537 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9199 x 2.118 at 5.734 degrees (North through East) ! Clean map min=-0.00063659 max=0.10779 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0029-0113_X_2017_05_01_pus_uvs.log closed on Wed May 1 19:49:59 2019