! Started logfile: J0029-0113_S_2017_05_01_pus_uvs.log on Wed May 1 18:22:17 2019 obs J0029-0113_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0029-0113_S_2017_05_01_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.970602 visibilities/baseline/integration-bin. ! Found source: J0029-0113 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 16772 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0029-0113_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 396 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.877634Jy sigma=0.006564 ! Fit after self-cal, rms=0.861709Jy sigma=0.006493 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=7.066 mas, bpa=-2.246 degrees ! Estimated noise=1095.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109372 Jy ! Component: 100 - total flux cleaned = 0.144514 Jy ! Total flux subtracted in 100 components = 0.144514 Jy ! Clean residual min=-0.006901 max=0.016568 Jy/beam ! Clean residual mean=0.000026 rms=0.002316 Jy/beam ! Combined flux in latest and established models = 0.144514 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.144514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111462Jy sigma=0.000723 ! Fit after self-cal, rms=0.111422Jy sigma=0.000722 ! Inverting map ! Added new window around map position (3, 0.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0198787 Jy ! Component: 100 - total flux cleaned = 0.032056 Jy ! Total flux subtracted in 100 components = 0.032056 Jy ! Clean residual min=-0.004593 max=0.007741 Jy/beam ! Clean residual mean=0.000013 rms=0.001387 Jy/beam ! Combined flux in latest and established models = 0.17657 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 23 components and 0.17657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107256Jy sigma=0.000684 ! Fit after self-cal, rms=0.107182Jy sigma=0.000683 ! Inverting map ! Added new window around map position (6.5, 4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00888061 Jy ! Component: 100 - total flux cleaned = 0.0144373 Jy ! Total flux subtracted in 100 components = 0.0144373 Jy ! Clean residual min=-0.003894 max=0.004216 Jy/beam ! Clean residual mean=0.000008 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 0.191007 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 39 components and 0.191007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106336Jy sigma=0.000676 ! Fit after self-cal, rms=0.106306Jy sigma=0.000676 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=7.91 mas, bpa=-1.279 degrees ! Estimated noise=806.641 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00466627 Jy ! Component: 100 - total flux cleaned = 0.00733562 Jy ! Component: 150 - total flux cleaned = 0.00901846 Jy ! Component: 200 - total flux cleaned = 0.00961296 Jy ! Total flux subtracted in 200 components = 0.00961296 Jy ! Clean residual min=-0.002900 max=0.002804 Jy/beam ! Clean residual mean=0.000007 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.20062 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 69 components and 0.20062 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106059Jy sigma=0.000674 ! Fit after self-cal, rms=0.106050Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 0.90 HN 1.03 KP 1.04 ! LA 1.01 MK 1.01 NL 0.96 OV 1.04 ! PT 1.02 SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.92 HN 1.11 KP 0.98 ! LA 0.98 MK 0.95 NL 1.02 OV 1.09 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.02 KP 1.01 ! LA 1.02 MK 0.97 NL 1.02 OV 0.97 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.02 HN 0.96 KP 1.00* ! LA 0.91 MK 1.08 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.106050Jy sigma=0.000674 ! Fit after self-cal, rms=0.104533Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.316 mas, bmaj=7.903 mas, bpa=-1.139 degrees ! Estimated noise=807.244 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.0171e-05 Jy ! Component: 100 - total flux cleaned = 0.000186359 Jy ! Component: 150 - total flux cleaned = 0.000274192 Jy ! Component: 200 - total flux cleaned = 0.000346481 Jy ! Total flux subtracted in 200 components = 0.000346481 Jy ! Clean residual min=-0.002272 max=0.002516 Jy/beam ! Clean residual mean=0.000004 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.200967 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 83 components and 0.200967 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104510Jy sigma=0.000670 ! Fit after self-cal, rms=0.104499Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104499Jy sigma=0.000670 ! Fit after self-cal, rms=0.103501Jy sigma=0.000668 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.905 mas, bpa=-1.063 degrees ! Estimated noise=807.251 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.62828e-05 Jy ! Component: 100 - total flux cleaned = -0.000202876 Jy ! Component: 150 - total flux cleaned = -0.000254313 Jy ! Component: 200 - total flux cleaned = -0.000283522 Jy ! Total flux subtracted in 200 components = -0.000283522 Jy ! Clean residual min=-0.002086 max=0.002083 Jy/beam ! Clean residual mean=0.000005 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.200683 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 93 components and 0.200683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103494Jy sigma=0.000668 ! Fit after self-cal, rms=0.103473Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.61493e-05 Jy ! Component: 100 - total flux cleaned = 5.23999e-05 Jy ! Component: 150 - total flux cleaned = 4.0052e-05 Jy ! Component: 200 - total flux cleaned = 1.85278e-05 Jy ! Total flux subtracted in 200 components = 1.85278e-05 Jy ! Clean residual min=-0.002088 max=0.002089 Jy/beam ! Clean residual mean=0.000005 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.200702 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 102 components and 0.200702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103470Jy sigma=0.000668 ! Fit after self-cal, rms=0.103467Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103467Jy sigma=0.000668 ! Fit after self-cal, rms=0.103779Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=7.907 mas, bpa=-1.008 degrees ! Estimated noise=807.941 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157186 Jy ! Component: 100 - total flux cleaned = -0.000226849 Jy ! Component: 150 - total flux cleaned = -0.000250967 Jy ! Component: 200 - total flux cleaned = -0.000261685 Jy ! Total flux subtracted in 200 components = -0.000261685 Jy ! Clean residual min=-0.002070 max=0.002088 Jy/beam ! Clean residual mean=0.000005 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 0.20044 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 104 components and 0.20044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103776Jy sigma=0.000668 ! Fit after self-cal, rms=0.103775Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.25527e-05 Jy ! Component: 100 - total flux cleaned = -1.22651e-05 Jy ! Component: 150 - total flux cleaned = -3.09536e-05 Jy ! Component: 200 - total flux cleaned = -3.9372e-05 Jy ! Total flux subtracted in 200 components = -3.9372e-05 Jy ! Clean residual min=-0.002069 max=0.002080 Jy/beam ! Clean residual mean=0.000005 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.200401 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 106 components and 0.200401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103772Jy sigma=0.000668 ! Fit after self-cal, rms=0.103771Jy sigma=0.000668 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103771Jy sigma=0.000668 ! Fit after self-cal, rms=0.104138Jy sigma=0.000668 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.382 mas, bmaj=12.46 mas, bpa=-0.3857 degrees ! Estimated noise=973.842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203991 Jy ! Component: 100 - total flux cleaned = 0.000175716 Jy ! Component: 150 - total flux cleaned = 0.000157959 Jy ! Component: 200 - total flux cleaned = 0.000143441 Jy ! Total flux subtracted in 200 components = 0.000143441 Jy ! Clean residual min=-0.002543 max=0.002455 Jy/beam ! Clean residual mean=0.000010 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.200544 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 115 components and 0.200544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104140Jy sigma=0.000668 ! Fit after self-cal, rms=0.104139Jy sigma=0.000668 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.83501e-05 Jy ! Component: 100 - total flux cleaned = 4.05551e-05 Jy ! Component: 150 - total flux cleaned = 2.92158e-05 Jy ! Component: 200 - total flux cleaned = 2.91819e-05 Jy ! Total flux subtracted in 200 components = 2.91819e-05 Jy ! Clean residual min=-0.002537 max=0.002451 Jy/beam ! Clean residual mean=0.000010 rms=0.000683 Jy/beam ! Combined flux in latest and established models = 0.200573 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 119 components and 0.200573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104141Jy sigma=0.000668 ! Fit after self-cal, rms=0.104139Jy sigma=0.000668 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.91 mas, bpa=-0.9538 degrees ! Estimated noise=808.796 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 7.91 at -0.9538 degrees (North through East) ! Clean map min=-0.0019391 max=0.14104 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.874 mas, bmaj=7.077 mas, bpa=-1.945 degrees ! Estimated noise=1097.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109488 Jy ! Component: 100 - total flux cleaned = 0.14553 Jy ! Component: 150 - total flux cleaned = 0.165293 Jy ! Component: 200 - total flux cleaned = 0.177544 Jy ! Total flux subtracted in 200 components = 0.177544 Jy ! Clean residual min=-0.004255 max=0.006449 Jy/beam ! Clean residual mean=0.000011 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 0.177544 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.177544 Jy ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.91 mas, bpa=-0.9538 degrees ! Estimated noise=808.796 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00941977 Jy ! Component: 100 - total flux cleaned = 0.0148605 Jy ! Component: 150 - total flux cleaned = 0.018162 Jy ! Component: 200 - total flux cleaned = 0.0201969 Jy ! Total flux subtracted in 200 components = 0.0201969 Jy ! Clean residual min=-0.002353 max=0.002128 Jy/beam ! Clean residual mean=0.000007 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.197741 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 54 components and 0.197741 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.382 mas, bmaj=12.46 mas, bpa=-0.3857 degrees ! Estimated noise=973.842 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0019168 Jy ! Component: 100 - total flux cleaned = 0.00232003 Jy ! Component: 150 - total flux cleaned = 0.00245316 Jy ! Component: 200 - total flux cleaned = 0.0024747 Jy ! Total flux subtracted in 200 components = 0.0024747 Jy ! Clean residual min=-0.002606 max=0.002484 Jy/beam ! Clean residual mean=0.000011 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.200216 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.666e-05 Jy ! Component: 100 - total flux cleaned = 4.73727e-05 Jy ! Component: 150 - total flux cleaned = 7.54966e-05 Jy ! Component: 200 - total flux cleaned = 0.000100779 Jy ! Total flux subtracted in 200 components = 0.000100779 Jy ! Clean residual min=-0.002590 max=0.002479 Jy/beam ! Clean residual mean=0.000011 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.200316 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 74 components and 0.200316 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.91 mas, bpa=-0.9538 degrees ! Estimated noise=808.796 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.59392e-05 Jy ! Component: 100 - total flux cleaned = 4.20241e-05 Jy ! Component: 150 - total flux cleaned = -1.0701e-05 Jy ! Component: 200 - total flux cleaned = -7.41223e-05 Jy ! Total flux subtracted in 200 components = -7.41223e-05 Jy ! Clean residual min=-0.002082 max=0.002044 Jy/beam ! Clean residual mean=0.000005 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.200242 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 86 components and 0.200242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104147Jy sigma=0.000668 ! Fit after self-cal, rms=0.104153Jy sigma=0.000668 wmodel J0029-0113_S_2017_05_01_pus_map.mod ! Writing 86 model components to file: J0029-0113_S_2017_05_01_pus_map.mod wobs J0029-0113_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0029-0113_S_2017_05_01_pus_uvs.fits wwins J0029-0113_S_2017_05_01_pus_map.win ! wwins: Wrote 3 windows to J0029-0113_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302523 Jy ! Component: 100 - total flux cleaned = 0.000516041 Jy ! Component: 150 - total flux cleaned = 0.000785054 Jy ! Component: 200 - total flux cleaned = 0.00104274 Jy ! Component: 250 - total flux cleaned = 0.00119806 Jy ! Component: 300 - total flux cleaned = 0.00131899 Jy ! Component: 350 - total flux cleaned = 0.00152424 Jy ! Component: 400 - total flux cleaned = 0.00163808 Jy ! Component: 450 - total flux cleaned = 0.00177751 Jy ! Component: 500 - total flux cleaned = 0.00188658 Jy ! Component: 550 - total flux cleaned = 0.00199331 Jy ! Component: 600 - total flux cleaned = 0.00214991 Jy ! Component: 650 - total flux cleaned = 0.00227733 Jy ! Component: 700 - total flux cleaned = 0.00232773 Jy ! Component: 750 - total flux cleaned = 0.00237734 Jy ! Component: 800 - total flux cleaned = 0.00249927 Jy ! Component: 850 - total flux cleaned = 0.0026192 Jy ! Component: 900 - total flux cleaned = 0.00273755 Jy ! Component: 950 - total flux cleaned = 0.00280743 Jy ! Component: 1000 - total flux cleaned = 0.00292222 Jy ! Component: 1050 - total flux cleaned = 0.00303499 Jy ! Component: 1100 - total flux cleaned = 0.00318988 Jy ! Component: 1150 - total flux cleaned = 0.00327708 Jy ! Component: 1200 - total flux cleaned = 0.00344884 Jy ! Component: 1250 - total flux cleaned = 0.00353353 Jy ! Component: 1300 - total flux cleaned = 0.00365914 Jy ! Component: 1350 - total flux cleaned = 0.00374157 Jy ! Component: 1400 - total flux cleaned = 0.00386428 Jy ! Component: 1450 - total flux cleaned = 0.00396487 Jy ! Component: 1500 - total flux cleaned = 0.00410372 Jy ! Component: 1550 - total flux cleaned = 0.00416239 Jy ! Component: 1600 - total flux cleaned = 0.00423992 Jy ! Component: 1650 - total flux cleaned = 0.00429741 Jy ! Component: 1700 - total flux cleaned = 0.00439212 Jy ! Component: 1750 - total flux cleaned = 0.00442956 Jy ! Component: 1800 - total flux cleaned = 0.00441116 Jy ! Component: 1850 - total flux cleaned = 0.00450316 Jy ! Component: 1900 - total flux cleaned = 0.00459404 Jy ! Component: 1950 - total flux cleaned = 0.0046121 Jy ! Component: 2000 - total flux cleaned = 0.0046831 Jy ! Component: 2050 - total flux cleaned = 0.00471828 Jy ! Component: 2100 - total flux cleaned = 0.00471837 Jy ! Component: 2150 - total flux cleaned = 0.00478704 Jy ! Component: 2200 - total flux cleaned = 0.00483824 Jy ! Component: 2250 - total flux cleaned = 0.00497277 Jy ! Component: 2300 - total flux cleaned = 0.00497248 Jy ! Component: 2350 - total flux cleaned = 0.00507155 Jy ! Component: 2400 - total flux cleaned = 0.00508809 Jy ! Component: 2450 - total flux cleaned = 0.00515299 Jy ! Component: 2500 - total flux cleaned = 0.00523331 Jy ! Component: 2550 - total flux cleaned = 0.00531264 Jy ! Component: 2600 - total flux cleaned = 0.00534437 Jy ! Component: 2650 - total flux cleaned = 0.00545364 Jy ! Component: 2700 - total flux cleaned = 0.00549982 Jy ! Component: 2750 - total flux cleaned = 0.00557645 Jy ! Component: 2800 - total flux cleaned = 0.00562214 Jy ! Component: 2850 - total flux cleaned = 0.00574255 Jy ! Component: 2900 - total flux cleaned = 0.0058173 Jy ! Component: 2950 - total flux cleaned = 0.00589131 Jy ! Component: 3000 - total flux cleaned = 0.00597943 Jy ! Component: 3050 - total flux cleaned = 0.00606699 Jy ! Component: 3100 - total flux cleaned = 0.00612491 Jy ! Component: 3150 - total flux cleaned = 0.00623983 Jy ! Component: 3200 - total flux cleaned = 0.00633962 Jy ! Component: 3250 - total flux cleaned = 0.00638196 Jy ! Component: 3300 - total flux cleaned = 0.00639594 Jy ! Component: 3350 - total flux cleaned = 0.00646573 Jy ! Component: 3400 - total flux cleaned = 0.00649352 Jy ! Component: 3450 - total flux cleaned = 0.006576 Jy ! Component: 3500 - total flux cleaned = 0.00661704 Jy ! Component: 3550 - total flux cleaned = 0.00663069 Jy ! Component: 3600 - total flux cleaned = 0.00673852 Jy ! Component: 3650 - total flux cleaned = 0.006792 Jy ! Component: 3700 - total flux cleaned = 0.00680531 Jy ! Component: 3750 - total flux cleaned = 0.00683169 Jy ! Component: 3800 - total flux cleaned = 0.00692351 Jy ! Component: 3850 - total flux cleaned = 0.00694969 Jy ! Component: 3900 - total flux cleaned = 0.00698854 Jy ! Component: 3950 - total flux cleaned = 0.00703993 Jy ! Component: 4000 - total flux cleaned = 0.00706545 Jy ! Component: 4050 - total flux cleaned = 0.00711627 Jy ! Total flux subtracted in 4096 components = 0.00710362 Jy ! Clean residual min=-0.000793 max=0.000721 Jy/beam ! Clean residual mean=0.000003 rms=0.000232 Jy/beam ! Combined flux in latest and established models = 0.207346 Jy keep ! Adding 283 model components to the UV plane model. ! The established model now contains 369 components and 0.207346 Jy ![Exited script file: muppet] wmap "J0029-0113_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 7.91 at -0.9538 degrees (North through East) ! Clean map min=-0.0014652 max=0.14116 Jy/beam ! Writing clean map to FITS file: J0029-0113_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.141156 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000230971 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.490885 0.490885 0.981771 1.96354 3.92708 7.85417 15.7083 31.4167 62.8333 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.141 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 7.91 at -0.9538 degrees (North through East) ! Clean map min=-0.0014652 max=0.14116 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0029-0113_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:22:25 2019