! Started logfile: J0029+0509_S_2017_08_12_pus_uvs.log on Fri May 10 14:48:57 2019 obs J0029+0509_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0029+0509_S_2017_08_12_pus_uva.fits ! AN table 1: 162 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.471879 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0029+0509 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 13760 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0029+0509_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 695 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 755 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 708 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1413 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.834376Jy sigma=0.007592 ! Fit after self-cal, rms=0.824323Jy sigma=0.007528 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.771 mas, bmaj=6.574 mas, bpa=-3.295 degrees ! Estimated noise=1035.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.134727 Jy ! Component: 100 - total flux cleaned = 0.17503 Jy ! Total flux subtracted in 100 components = 0.17503 Jy ! Clean residual min=-0.014534 max=0.054564 Jy/beam ! Clean residual mean=-0.000022 rms=0.004846 Jy/beam ! Combined flux in latest and established models = 0.17503 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.17503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116742Jy sigma=0.001027 ! Fit after self-cal, rms=0.116689Jy sigma=0.001026 ! Inverting map ! Added new window around map position (-32.5, 53). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0452391 Jy ! Component: 100 - total flux cleaned = 0.0684239 Jy ! Total flux subtracted in 100 components = 0.0684239 Jy ! Clean residual min=-0.009130 max=0.013261 Jy/beam ! Clean residual mean=-0.000020 rms=0.002787 Jy/beam ! Combined flux in latest and established models = 0.243454 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 26 components and 0.243454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094782Jy sigma=0.000819 ! Fit after self-cal, rms=0.093265Jy sigma=0.000805 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.019975 Jy ! Component: 100 - total flux cleaned = 0.0345246 Jy ! Total flux subtracted in 100 components = 0.0345246 Jy ! Clean residual min=-0.006886 max=0.009034 Jy/beam ! Clean residual mean=-0.000013 rms=0.001944 Jy/beam ! Combined flux in latest and established models = 0.277979 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 47 components and 0.277979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087031Jy sigma=0.000746 ! Fit after self-cal, rms=0.086876Jy sigma=0.000744 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.144 mas, bmaj=7.185 mas, bpa=-2.797 degrees ! Estimated noise=791.987 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0163443 Jy ! Component: 100 - total flux cleaned = 0.028153 Jy ! Component: 150 - total flux cleaned = 0.037007 Jy ! Component: 200 - total flux cleaned = 0.0437558 Jy ! Total flux subtracted in 200 components = 0.0437558 Jy ! Clean residual min=-0.004710 max=0.006645 Jy/beam ! Clean residual mean=-0.000010 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.321734 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 80 components and 0.321734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082614Jy sigma=0.000705 ! Fit after self-cal, rms=0.082512Jy sigma=0.000704 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 0.95 KP 1.02 ! LA 0.96 MK 1.03 NL 0.88 OV 0.98 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.24 FD 1.00* HN 0.99 KP 0.99 ! LA 0.93 MK 1.01 NL 1.05 OV 1.03 ! PT 0.95 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 0.98 KP 0.98 ! LA 0.96 MK 1.07 NL 1.00 OV 0.94 ! PT 0.94 SC 1.03 ! ! ! Correcting IF 4. ! A total of 207 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.082512Jy sigma=0.000704 ! Fit after self-cal, rms=0.078884Jy sigma=0.000687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.216 mas, bmaj=7.302 mas, bpa=-1.886 degrees ! Estimated noise=780.174 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-27.5, 45.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0057862 Jy ! Component: 100 - total flux cleaned = 0.0093717 Jy ! Component: 150 - total flux cleaned = 0.0110251 Jy ! Component: 200 - total flux cleaned = 0.0120931 Jy ! Total flux subtracted in 200 components = 0.0120931 Jy ! Clean residual min=-0.004138 max=0.003312 Jy/beam ! Clean residual mean=0.000001 rms=0.000884 Jy/beam ! Combined flux in latest and established models = 0.333828 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 109 components and 0.333828 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078367Jy sigma=0.000682 ! Fit after self-cal, rms=0.078365Jy sigma=0.000682 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078365Jy sigma=0.000682 ! Fit after self-cal, rms=0.077518Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.202 mas, bmaj=7.293 mas, bpa=-1.897 degrees ! Estimated noise=780.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00243622 Jy ! Component: 100 - total flux cleaned = 0.00376231 Jy ! Component: 150 - total flux cleaned = 0.00461717 Jy ! Component: 200 - total flux cleaned = 0.00530215 Jy ! Total flux subtracted in 200 components = 0.00530215 Jy ! Clean residual min=-0.002283 max=0.002144 Jy/beam ! Clean residual mean=-0.000002 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.33913 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 129 components and 0.33913 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077413Jy sigma=0.000671 ! Fit after self-cal, rms=0.077422Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554577 Jy ! Component: 100 - total flux cleaned = 0.000806664 Jy ! Component: 150 - total flux cleaned = 0.000995903 Jy ! Component: 200 - total flux cleaned = 0.001045 Jy ! Total flux subtracted in 200 components = 0.001045 Jy ! Clean residual min=-0.002301 max=0.002104 Jy/beam ! Clean residual mean=-0.000002 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.340175 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 147 components and 0.340175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077399Jy sigma=0.000671 ! Fit after self-cal, rms=0.077398Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077398Jy sigma=0.000671 ! Fit after self-cal, rms=0.077346Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.2 mas, bmaj=7.288 mas, bpa=-1.919 degrees ! Estimated noise=779.194 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108518 Jy ! Component: 100 - total flux cleaned = 0.00144014 Jy ! Component: 150 - total flux cleaned = 0.00165589 Jy ! Component: 200 - total flux cleaned = 0.00184667 Jy ! Total flux subtracted in 200 components = 0.00184667 Jy ! Clean residual min=-0.002085 max=0.001990 Jy/beam ! Clean residual mean=-0.000003 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.342021 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 171 components and 0.342021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077318Jy sigma=0.000671 ! Fit after self-cal, rms=0.077320Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142315 Jy ! Component: 100 - total flux cleaned = 0.000266745 Jy ! Component: 150 - total flux cleaned = 0.000381801 Jy ! Component: 200 - total flux cleaned = 0.000453307 Jy ! Total flux subtracted in 200 components = 0.000453307 Jy ! Clean residual min=-0.002063 max=0.001991 Jy/beam ! Clean residual mean=-0.000002 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.342475 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 178 components and 0.342475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077310Jy sigma=0.000670 ! Fit after self-cal, rms=0.077309Jy sigma=0.000670 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077309Jy sigma=0.000670 ! Fit after self-cal, rms=0.077251Jy sigma=0.000670 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.076 mas, bmaj=11.63 mas, bpa=-1.391 degrees ! Estimated noise=994.263 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000829105 Jy ! Component: 100 - total flux cleaned = 0.0011589 Jy ! Component: 150 - total flux cleaned = 0.00134708 Jy ! Component: 200 - total flux cleaned = 0.0015439 Jy ! Total flux subtracted in 200 components = 0.0015439 Jy ! Clean residual min=-0.002763 max=0.002190 Jy/beam ! Clean residual mean=-0.000008 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.344019 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 196 components and 0.344019 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077247Jy sigma=0.000670 ! Fit after self-cal, rms=0.077245Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000229614 Jy ! Component: 100 - total flux cleaned = 0.000380094 Jy ! Component: 150 - total flux cleaned = 0.000451387 Jy ! Component: 200 - total flux cleaned = 0.000502462 Jy ! Total flux subtracted in 200 components = 0.000502462 Jy ! Clean residual min=-0.002695 max=0.002202 Jy/beam ! Clean residual mean=-0.000007 rms=0.000655 Jy/beam ! Combined flux in latest and established models = 0.344521 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 204 components and 0.344521 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077248Jy sigma=0.000670 ! Fit after self-cal, rms=0.077247Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=7.284 mas, bpa=-1.923 degrees ! Estimated noise=778.636 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 7.284 at -1.923 degrees (North through East) ! Clean map min=-0.0019235 max=0.18141 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=6.65 mas, bpa=-2.199 degrees ! Estimated noise=1030.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135342 Jy ! Component: 100 - total flux cleaned = 0.191481 Jy ! Component: 150 - total flux cleaned = 0.226234 Jy ! Component: 200 - total flux cleaned = 0.250089 Jy ! Total flux subtracted in 200 components = 0.250089 Jy ! Clean residual min=-0.007061 max=0.013590 Jy/beam ! Clean residual mean=-0.000015 rms=0.002261 Jy/beam ! Combined flux in latest and established models = 0.250089 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.250089 Jy ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=7.284 mas, bpa=-1.923 degrees ! Estimated noise=778.636 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0221351 Jy ! Component: 100 - total flux cleaned = 0.0380513 Jy ! Component: 150 - total flux cleaned = 0.0498417 Jy ! Component: 200 - total flux cleaned = 0.0587386 Jy ! Total flux subtracted in 200 components = 0.0587386 Jy ! Clean residual min=-0.003512 max=0.005166 Jy/beam ! Clean residual mean=-0.000008 rms=0.001080 Jy/beam ! Combined flux in latest and established models = 0.308828 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 69 components and 0.308828 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00685862 Jy ! Component: 100 - total flux cleaned = 0.0121853 Jy ! Component: 150 - total flux cleaned = 0.0163773 Jy ! Component: 200 - total flux cleaned = 0.0197753 Jy ! Total flux subtracted in 200 components = 0.0197753 Jy ! Clean residual min=-0.002479 max=0.002706 Jy/beam ! Clean residual mean=-0.000004 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.328603 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 105 components and 0.328603 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.076 mas, bmaj=11.63 mas, bpa=-1.391 degrees ! Estimated noise=994.263 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00468997 Jy ! Component: 100 - total flux cleaned = 0.00780947 Jy ! Component: 150 - total flux cleaned = 0.0100572 Jy ! Component: 200 - total flux cleaned = 0.011712 Jy ! Total flux subtracted in 200 components = 0.011712 Jy ! Clean residual min=-0.002876 max=0.002124 Jy/beam ! Clean residual mean=-0.000008 rms=0.000688 Jy/beam ! Combined flux in latest and established models = 0.340315 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123818 Jy ! Component: 100 - total flux cleaned = 0.00217428 Jy ! Component: 150 - total flux cleaned = 0.00288785 Jy ! Component: 200 - total flux cleaned = 0.00337529 Jy ! Total flux subtracted in 200 components = 0.00337529 Jy ! Clean residual min=-0.002669 max=0.002130 Jy/beam ! Clean residual mean=-0.000008 rms=0.000661 Jy/beam ! Combined flux in latest and established models = 0.343691 Jy ! Adding 106 model components to the UV plane model. ! The established model now contains 195 components and 0.34369 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=7.284 mas, bpa=-1.923 degrees ! Estimated noise=778.636 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020673 Jy ! Component: 100 - total flux cleaned = 0.00045432 Jy ! Component: 150 - total flux cleaned = 0.000635431 Jy ! Component: 200 - total flux cleaned = 0.000669626 Jy ! Total flux subtracted in 200 components = 0.000669626 Jy ! Clean residual min=-0.002081 max=0.002195 Jy/beam ! Clean residual mean=-0.000002 rms=0.000501 Jy/beam ! Combined flux in latest and established models = 0.34436 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 210 components and 0.34436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077293Jy sigma=0.000671 ! Fit after self-cal, rms=0.077289Jy sigma=0.000671 wmodel J0029+0509_S_2017_08_12_pus_map.mod ! Writing 210 model components to file: J0029+0509_S_2017_08_12_pus_map.mod wobs J0029+0509_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0029+0509_S_2017_08_12_pus_uvs.fits wwins J0029+0509_S_2017_08_12_pus_map.win ! wwins: Wrote 3 windows to J0029+0509_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000566202 Jy ! Component: 100 - total flux cleaned = 0.000856705 Jy ! Component: 150 - total flux cleaned = 0.00105979 Jy ! Component: 200 - total flux cleaned = 0.00128609 Jy ! Component: 250 - total flux cleaned = 0.00131734 Jy ! Component: 300 - total flux cleaned = 0.00140667 Jy ! Component: 350 - total flux cleaned = 0.00140696 Jy ! Component: 400 - total flux cleaned = 0.00143548 Jy ! Component: 450 - total flux cleaned = 0.00151715 Jy ! Component: 500 - total flux cleaned = 0.00162344 Jy ! Component: 550 - total flux cleaned = 0.0017008 Jy ! Component: 600 - total flux cleaned = 0.00175128 Jy ! Component: 650 - total flux cleaned = 0.00180031 Jy ! Component: 700 - total flux cleaned = 0.00177566 Jy ! Component: 750 - total flux cleaned = 0.00179954 Jy ! Component: 800 - total flux cleaned = 0.00180003 Jy ! Component: 850 - total flux cleaned = 0.0017775 Jy ! Component: 900 - total flux cleaned = 0.00164378 Jy ! Component: 950 - total flux cleaned = 0.00160037 Jy ! Component: 1000 - total flux cleaned = 0.00157874 Jy ! Component: 1050 - total flux cleaned = 0.00143138 Jy ! Component: 1100 - total flux cleaned = 0.00138951 Jy ! Component: 1150 - total flux cleaned = 0.00130772 Jy ! Component: 1200 - total flux cleaned = 0.00124764 Jy ! Component: 1250 - total flux cleaned = 0.00114883 Jy ! Component: 1300 - total flux cleaned = 0.00109072 Jy ! Component: 1350 - total flux cleaned = 0.000995395 Jy ! Component: 1400 - total flux cleaned = 0.000939236 Jy ! Component: 1450 - total flux cleaned = 0.000920744 Jy ! Component: 1500 - total flux cleaned = 0.000757049 Jy ! Component: 1550 - total flux cleaned = 0.000739381 Jy ! Component: 1600 - total flux cleaned = 0.000598035 Jy ! Component: 1650 - total flux cleaned = 0.000563377 Jy ! Component: 1700 - total flux cleaned = 0.000546401 Jy ! Component: 1750 - total flux cleaned = 0.000512613 Jy ! Component: 1800 - total flux cleaned = 0.000495574 Jy ! Component: 1850 - total flux cleaned = 0.000512278 Jy ! Component: 1900 - total flux cleaned = 0.000479746 Jy ! Component: 1950 - total flux cleaned = 0.000592693 Jy ! Component: 2000 - total flux cleaned = 0.000592283 Jy ! Component: 2050 - total flux cleaned = 0.000561015 Jy ! Component: 2100 - total flux cleaned = 0.0006078 Jy ! Component: 2150 - total flux cleaned = 0.00063863 Jy ! Component: 2200 - total flux cleaned = 0.00069967 Jy ! Component: 2250 - total flux cleaned = 0.000684503 Jy ! Component: 2300 - total flux cleaned = 0.000699388 Jy ! Component: 2350 - total flux cleaned = 0.000728622 Jy ! Component: 2400 - total flux cleaned = 0.000714372 Jy ! Component: 2450 - total flux cleaned = 0.00075737 Jy ! Component: 2500 - total flux cleaned = 0.00072899 Jy ! Component: 2550 - total flux cleaned = 0.00071497 Jy ! Component: 2600 - total flux cleaned = 0.000714939 Jy ! Component: 2650 - total flux cleaned = 0.000645758 Jy ! Component: 2700 - total flux cleaned = 0.000686932 Jy ! Component: 2750 - total flux cleaned = 0.000686982 Jy ! Component: 2800 - total flux cleaned = 0.000646654 Jy ! Component: 2850 - total flux cleaned = 0.00063338 Jy ! Component: 2900 - total flux cleaned = 0.000673016 Jy ! Component: 2950 - total flux cleaned = 0.000659973 Jy ! Component: 3000 - total flux cleaned = 0.000660011 Jy ! Component: 3050 - total flux cleaned = 0.000659963 Jy ! Component: 3100 - total flux cleaned = 0.000608886 Jy ! Component: 3150 - total flux cleaned = 0.000596285 Jy ! Component: 3200 - total flux cleaned = 0.000533385 Jy ! Component: 3250 - total flux cleaned = 0.000520969 Jy ! Component: 3300 - total flux cleaned = 0.000508466 Jy ! Component: 3350 - total flux cleaned = 0.000483786 Jy ! Component: 3400 - total flux cleaned = 0.000495985 Jy ! Component: 3450 - total flux cleaned = 0.000520252 Jy ! Component: 3500 - total flux cleaned = 0.00043588 Jy ! Component: 3550 - total flux cleaned = 0.000423846 Jy ! Component: 3600 - total flux cleaned = 0.000388288 Jy ! Component: 3650 - total flux cleaned = 0.00045902 Jy ! Component: 3700 - total flux cleaned = 0.000435573 Jy ! Component: 3750 - total flux cleaned = 0.000377517 Jy ! Component: 3800 - total flux cleaned = 0.000412199 Jy ! Component: 3850 - total flux cleaned = 0.000400724 Jy ! Component: 3900 - total flux cleaned = 0.000400675 Jy ! Component: 3950 - total flux cleaned = 0.00037802 Jy ! Component: 4000 - total flux cleaned = 0.000411574 Jy ! Component: 4050 - total flux cleaned = 0.000366816 Jy ! Total flux subtracted in 4096 components = 0.000366768 Jy ! Clean residual min=-0.000731 max=0.000679 Jy/beam ! Clean residual mean=0.000001 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.344727 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 514 components and 0.344727 Jy ![Exited script file: muppet] wmap "J0029+0509_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 7.284 at -1.923 degrees (North through East) ! Clean map min=-0.0012458 max=0.181 Jy/beam ! Writing clean map to FITS file: J0029+0509_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.181 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000196338 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.325422 0.325422 0.650844 1.30169 2.60337 5.20675 10.4135 20.827 41.654 83.308 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.181 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 7.284 at -1.923 degrees (North through East) ! Clean map min=-0.0012458 max=0.181 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0029+0509_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:49:02 2019