! Started logfile: J0027+4514_S_2017_10_09_pus_uvs.log on Sun May 12 13:01:49 2019 obs J0027+4514_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0027+4514_S_2017_10_09_pus_uva.fits ! AN table 1: 190 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.37924 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0027+4514 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 10376 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0027+4514_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 957 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 1164 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 1239 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1193 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992275Jy sigma=0.009195 ! Fit after self-cal, rms=0.956511Jy sigma=0.008870 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=8.142 mas, bpa=22.13 degrees ! Estimated noise=2318.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0374901 Jy ! Component: 100 - total flux cleaned = 0.0449098 Jy ! Total flux subtracted in 100 components = 0.0449098 Jy ! Clean residual min=-0.005219 max=0.005561 Jy/beam ! Clean residual mean=-0.000016 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.0449098 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0449098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074145Jy sigma=0.000605 ! Fit after self-cal, rms=0.072902Jy sigma=0.000594 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.304 mas, bmaj=8.69 mas, bpa=20.25 degrees ! Estimated noise=1028.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190568 Jy ! Component: 100 - total flux cleaned = 0.00231589 Jy ! Component: 150 - total flux cleaned = 0.00252808 Jy ! Component: 200 - total flux cleaned = 0.00272981 Jy ! Total flux subtracted in 200 components = 0.00272981 Jy ! Clean residual min=-0.003561 max=0.002896 Jy/beam ! Clean residual mean=-0.000014 rms=0.000871 Jy/beam ! Combined flux in latest and established models = 0.0476396 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 25 components and 0.0476396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072813Jy sigma=0.000594 ! Fit after self-cal, rms=0.072828Jy sigma=0.000594 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.05 HN 1.06 KP 0.90 ! LA 1.02 MK 1.02 NL 1.04 OV 1.00* ! PT 1.16 ! ! ! Correcting IF 2. ! A total of 135 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.20 HN 1.08 KP 0.88 ! LA 0.92 MK 0.95 NL 0.95 OV 1.00* ! PT 1.11 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.14 HN 1.02 KP 0.85 ! LA 0.90 MK 0.99 NL 0.95 OV 1.00* ! PT 1.11 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.02 HN 0.96 KP 1.00* ! LA 0.71 MK 0.81 NL 1.00* OV 1.00* ! PT 0.95 ! ! ! Fit before self-cal, rms=0.072828Jy sigma=0.000594 ! Fit after self-cal, rms=0.068486Jy sigma=0.000593 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.279 mas, bmaj=8.813 mas, bpa=19.59 degrees ! Estimated noise=1043.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000241159 Jy ! Component: 100 - total flux cleaned = -0.00027207 Jy ! Component: 150 - total flux cleaned = -0.000299212 Jy ! Component: 200 - total flux cleaned = -0.000323555 Jy ! Total flux subtracted in 200 components = -0.000323555 Jy ! Clean residual min=-0.002378 max=0.002596 Jy/beam ! Clean residual mean=-0.000008 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.0473161 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.0473161 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068448Jy sigma=0.000593 ! Fit after self-cal, rms=0.068253Jy sigma=0.000592 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068253Jy sigma=0.000592 ! Fit after self-cal, rms=0.067396Jy sigma=0.000591 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.291 mas, bmaj=8.695 mas, bpa=20.11 degrees ! Estimated noise=1034.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000192073 Jy ! Component: 100 - total flux cleaned = -0.000257035 Jy ! Component: 150 - total flux cleaned = -0.000280945 Jy ! Component: 200 - total flux cleaned = -0.00030051 Jy ! Total flux subtracted in 200 components = -0.00030051 Jy ! Clean residual min=-0.002497 max=0.002339 Jy/beam ! Clean residual mean=-0.000009 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.0470156 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.0470156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067370Jy sigma=0.000591 ! Fit after self-cal, rms=0.067341Jy sigma=0.000591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000276807 Jy ! Component: 100 - total flux cleaned = -0.000241106 Jy ! Component: 150 - total flux cleaned = -0.000209261 Jy ! Component: 200 - total flux cleaned = -0.000194467 Jy ! Total flux subtracted in 200 components = -0.000194467 Jy ! Clean residual min=-0.002468 max=0.002270 Jy/beam ! Clean residual mean=-0.000010 rms=0.000590 Jy/beam ! Combined flux in latest and established models = 0.0468211 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 52 components and 0.0468211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067330Jy sigma=0.000591 ! Fit after self-cal, rms=0.067330Jy sigma=0.000591 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067330Jy sigma=0.000591 ! Fit after self-cal, rms=0.067029Jy sigma=0.000591 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.293 mas, bmaj=8.67 mas, bpa=20.72 degrees ! Estimated noise=1032.79 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016646 Jy ! Component: 100 - total flux cleaned = -0.000307048 Jy ! Component: 150 - total flux cleaned = -0.0003255 Jy ! Component: 200 - total flux cleaned = -0.000342335 Jy ! Total flux subtracted in 200 components = -0.000342335 Jy ! Clean residual min=-0.002401 max=0.002229 Jy/beam ! Clean residual mean=-0.000008 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.0464788 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.0464788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067011Jy sigma=0.000591 ! Fit after self-cal, rms=0.067008Jy sigma=0.000591 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00016166 Jy ! Component: 100 - total flux cleaned = -0.000130858 Jy ! Component: 150 - total flux cleaned = -0.000144542 Jy ! Component: 200 - total flux cleaned = -0.000131118 Jy ! Total flux subtracted in 200 components = -0.000131118 Jy ! Clean residual min=-0.002412 max=0.002223 Jy/beam ! Clean residual mean=-0.000009 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.0463476 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 58 components and 0.0463476 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067001Jy sigma=0.000590 ! Fit after self-cal, rms=0.067001Jy sigma=0.000590 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067001Jy sigma=0.000590 ! Fit after self-cal, rms=0.066765Jy sigma=0.000590 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.272 mas, bmaj=10.7 mas, bpa=18.71 degrees ! Estimated noise=1226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00037388 Jy ! Component: 100 - total flux cleaned = -0.000356828 Jy ! Component: 150 - total flux cleaned = -0.000369141 Jy ! Component: 200 - total flux cleaned = -0.000368944 Jy ! Total flux subtracted in 200 components = -0.000368944 Jy ! Clean residual min=-0.002185 max=0.002043 Jy/beam ! Clean residual mean=-0.000015 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.0459787 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 66 components and 0.0459787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066756Jy sigma=0.000590 ! Fit after self-cal, rms=0.066754Jy sigma=0.000590 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000202274 Jy ! Component: 100 - total flux cleaned = -0.000181131 Jy ! Component: 150 - total flux cleaned = -0.000162986 Jy ! Component: 200 - total flux cleaned = -0.000147273 Jy ! Total flux subtracted in 200 components = -0.000147273 Jy ! Clean residual min=-0.002269 max=0.002109 Jy/beam ! Clean residual mean=-0.000017 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.0458314 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 67 components and 0.0458314 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066752Jy sigma=0.000590 ! Fit after self-cal, rms=0.066750Jy sigma=0.000590 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.293 mas, bmaj=8.657 mas, bpa=21.24 degrees ! Estimated noise=1029.19 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.293 x 8.657 at 21.24 degrees (North through East) ! Clean map min=-0.0031257 max=0.045782 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=8.167 mas, bpa=23.49 degrees ! Estimated noise=2212.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0364283 Jy ! Component: 100 - total flux cleaned = 0.0407554 Jy ! Component: 150 - total flux cleaned = 0.0422784 Jy ! Component: 200 - total flux cleaned = 0.043637 Jy ! Total flux subtracted in 200 components = 0.043637 Jy ! Clean residual min=-0.004581 max=0.003771 Jy/beam ! Clean residual mean=-0.000013 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.043637 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.043637 Jy ! Inverting map and beam ! Estimated beam: bmin=4.293 mas, bmaj=8.657 mas, bpa=21.24 degrees ! Estimated noise=1029.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00164684 Jy ! Component: 100 - total flux cleaned = 0.00182484 Jy ! Component: 150 - total flux cleaned = 0.00196944 Jy ! Component: 200 - total flux cleaned = 0.00212082 Jy ! Total flux subtracted in 200 components = 0.00212082 Jy ! Clean residual min=-0.002604 max=0.002239 Jy/beam ! Clean residual mean=-0.000010 rms=0.000615 Jy/beam ! Combined flux in latest and established models = 0.0457578 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.0457578 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.272 mas, bmaj=10.7 mas, bpa=18.71 degrees ! Estimated noise=1226 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000223566 Jy ! Component: 100 - total flux cleaned = -0.000120756 Jy ! Component: 150 - total flux cleaned = -8.13789e-05 Jy ! Component: 200 - total flux cleaned = -4.87863e-05 Jy ! Total flux subtracted in 200 components = -4.87863e-05 Jy ! Clean residual min=-0.002293 max=0.002100 Jy/beam ! Clean residual mean=-0.000019 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.045709 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.70566e-05 Jy ! Component: 100 - total flux cleaned = 5.10135e-05 Jy ! Component: 150 - total flux cleaned = 6.2015e-05 Jy ! Component: 200 - total flux cleaned = 6.24174e-05 Jy ! Total flux subtracted in 200 components = 6.24174e-05 Jy ! Clean residual min=-0.002263 max=0.002126 Jy/beam ! Clean residual mean=-0.000019 rms=0.000634 Jy/beam ! Combined flux in latest and established models = 0.0457714 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 0.0457714 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.293 mas, bmaj=8.657 mas, bpa=21.24 degrees ! Estimated noise=1029.19 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000107021 Jy ! Component: 100 - total flux cleaned = -7.02007e-05 Jy ! Component: 150 - total flux cleaned = -7.04805e-05 Jy ! Component: 200 - total flux cleaned = -6.98677e-05 Jy ! Total flux subtracted in 200 components = -6.98677e-05 Jy ! Clean residual min=-0.002464 max=0.002279 Jy/beam ! Clean residual mean=-0.000010 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.0457016 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.0457016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066752Jy sigma=0.000590 ! Fit after self-cal, rms=0.066750Jy sigma=0.000590 wmodel J0027+4514_S_2017_10_09_pus_map.mod ! Writing 53 model components to file: J0027+4514_S_2017_10_09_pus_map.mod wobs J0027+4514_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0027+4514_S_2017_10_09_pus_uvs.fits wwins J0027+4514_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0027+4514_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000763456 Jy ! Component: 100 - total flux cleaned = -0.00123226 Jy ! Component: 150 - total flux cleaned = -0.00158467 Jy ! Component: 200 - total flux cleaned = -0.00197626 Jy ! Component: 250 - total flux cleaned = -0.00237178 Jy ! Component: 300 - total flux cleaned = -0.00257104 Jy ! Component: 350 - total flux cleaned = -0.00265159 Jy ! Component: 400 - total flux cleaned = -0.00275523 Jy ! Component: 450 - total flux cleaned = -0.00283009 Jy ! Component: 500 - total flux cleaned = -0.00285347 Jy ! Component: 550 - total flux cleaned = -0.00289785 Jy ! Component: 600 - total flux cleaned = -0.00289664 Jy ! Component: 650 - total flux cleaned = -0.00289623 Jy ! Component: 700 - total flux cleaned = -0.00287564 Jy ! Component: 750 - total flux cleaned = -0.00281544 Jy ! Component: 800 - total flux cleaned = -0.00273743 Jy ! Component: 850 - total flux cleaned = -0.00266178 Jy ! Component: 900 - total flux cleaned = -0.00260649 Jy ! Component: 950 - total flux cleaned = -0.00260665 Jy ! Component: 1000 - total flux cleaned = -0.00255409 Jy ! Component: 1050 - total flux cleaned = -0.00257154 Jy ! Component: 1100 - total flux cleaned = -0.00255507 Jy ! Component: 1150 - total flux cleaned = -0.00257136 Jy ! Component: 1200 - total flux cleaned = -0.00255566 Jy ! Component: 1250 - total flux cleaned = -0.00257139 Jy ! Component: 1300 - total flux cleaned = -0.00255625 Jy ! Component: 1350 - total flux cleaned = -0.00254154 Jy ! Component: 1400 - total flux cleaned = -0.00258653 Jy ! Component: 1450 - total flux cleaned = -0.00257151 Jy ! Component: 1500 - total flux cleaned = -0.00249909 Jy ! Component: 1550 - total flux cleaned = -0.00247069 Jy ! Component: 1600 - total flux cleaned = -0.00245677 Jy ! Component: 1650 - total flux cleaned = -0.00244318 Jy ! Component: 1700 - total flux cleaned = -0.0024294 Jy ! Component: 1750 - total flux cleaned = -0.00236198 Jy ! Component: 1800 - total flux cleaned = -0.00236185 Jy ! Component: 1850 - total flux cleaned = -0.00232213 Jy ! Component: 1900 - total flux cleaned = -0.00226993 Jy ! Component: 1950 - total flux cleaned = -0.00220549 Jy ! Component: 2000 - total flux cleaned = -0.00212908 Jy ! Component: 2050 - total flux cleaned = -0.00209124 Jy ! Component: 2100 - total flux cleaned = -0.00202855 Jy ! Component: 2150 - total flux cleaned = -0.00201602 Jy ! Component: 2200 - total flux cleaned = -0.00200367 Jy ! Component: 2250 - total flux cleaned = -0.00196697 Jy ! Component: 2300 - total flux cleaned = -0.00199134 Jy ! Component: 2350 - total flux cleaned = -0.0019551 Jy ! Component: 2400 - total flux cleaned = -0.00195516 Jy ! Component: 2450 - total flux cleaned = -0.00193136 Jy ! Component: 2500 - total flux cleaned = -0.00191958 Jy ! Component: 2550 - total flux cleaned = -0.00190782 Jy ! Component: 2600 - total flux cleaned = -0.00189609 Jy ! Component: 2650 - total flux cleaned = -0.00187281 Jy ! Component: 2700 - total flux cleaned = -0.00186123 Jy ! Component: 2750 - total flux cleaned = -0.00187277 Jy ! Component: 2800 - total flux cleaned = -0.00188431 Jy ! Component: 2850 - total flux cleaned = -0.0018614 Jy ! Component: 2900 - total flux cleaned = -0.0018614 Jy ! Component: 2950 - total flux cleaned = -0.00185 Jy ! Component: 3000 - total flux cleaned = -0.00183869 Jy ! Component: 3050 - total flux cleaned = -0.0018614 Jy ! Component: 3100 - total flux cleaned = -0.00186137 Jy ! Component: 3150 - total flux cleaned = -0.00187262 Jy ! Component: 3200 - total flux cleaned = -0.00189512 Jy ! Component: 3250 - total flux cleaned = -0.00191754 Jy ! Component: 3300 - total flux cleaned = -0.00195118 Jy ! Component: 3350 - total flux cleaned = -0.00195124 Jy ! Component: 3400 - total flux cleaned = -0.00196245 Jy ! Component: 3450 - total flux cleaned = -0.00198478 Jy ! Component: 3500 - total flux cleaned = -0.00199592 Jy ! Component: 3550 - total flux cleaned = -0.00200712 Jy ! Component: 3600 - total flux cleaned = -0.00206262 Jy ! Component: 3650 - total flux cleaned = -0.00208479 Jy ! Component: 3700 - total flux cleaned = -0.00210706 Jy ! Component: 3750 - total flux cleaned = -0.00214041 Jy ! Component: 3800 - total flux cleaned = -0.00218483 Jy ! Component: 3850 - total flux cleaned = -0.00220704 Jy ! Component: 3900 - total flux cleaned = -0.00222927 Jy ! Component: 3950 - total flux cleaned = -0.00227364 Jy ! Component: 4000 - total flux cleaned = -0.00229587 Jy ! Component: 4050 - total flux cleaned = -0.00232923 Jy ! Total flux subtracted in 4096 components = -0.00231808 Jy ! Clean residual min=-0.000699 max=0.000658 Jy/beam ! Clean residual mean=0.000004 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.0433835 Jy keep ! Adding 258 model components to the UV plane model. ! The established model now contains 311 components and 0.0433835 Jy ![Exited script file: muppet] wmap "J0027+4514_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.293 x 8.657 at 21.24 degrees (North through East) ! Clean map min=-0.0025858 max=0.045707 Jy/beam ! Writing clean map to FITS file: J0027+4514_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0457071 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000184756 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.21265 1.21265 2.4253 4.85061 9.70121 19.4024 38.8048 77.6097 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.045 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.293 x 8.657 at 21.24 degrees (North through East) ! Clean map min=-0.0025858 max=0.045707 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0027+4514_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:01:54 2019