! Started logfile: J0026-3512_S_2017_02_19_pus_uvs.log on Sat May 4 18:38:59 2019 obs J0026-3512_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0026-3512_S_2017_02_19_pus_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.377778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0026-3512 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 3196 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0026-3512_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 304 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.009854Jy sigma=0.005729 ! Fit after self-cal, rms=0.924441Jy sigma=0.005266 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.98 mas, bmaj=6.22 mas, bpa=-4.782 degrees ! Estimated noise=4715.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0631184 Jy ! Component: 100 - total flux cleaned = 0.0769025 Jy ! Total flux subtracted in 100 components = 0.0769025 Jy ! Clean residual min=-0.009050 max=0.008795 Jy/beam ! Clean residual mean=0.000006 rms=0.002209 Jy/beam ! Combined flux in latest and established models = 0.0769025 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0769025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113591Jy sigma=0.000602 ! Fit after self-cal, rms=0.112598Jy sigma=0.000596 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.687 mas, bmaj=7.374 mas, bpa=-4.306 degrees ! Estimated noise=2791.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00612818 Jy ! Component: 100 - total flux cleaned = 0.00888355 Jy ! Component: 150 - total flux cleaned = 0.00979224 Jy ! Component: 200 - total flux cleaned = 0.00992463 Jy ! Total flux subtracted in 200 components = 0.00992463 Jy ! Clean residual min=-0.007689 max=0.006727 Jy/beam ! Clean residual mean=0.000006 rms=0.001763 Jy/beam ! Combined flux in latest and established models = 0.0868271 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 22 components and 0.0868271 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112209Jy sigma=0.000594 ! Fit after self-cal, rms=0.112146Jy sigma=0.000594 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.92 HN 1.00* KP 1.05 ! LA 1.17 MK 1.06 NL 1.00* OV 1.00* ! PT 1.00* SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.12 HN 1.00* KP 1.09 ! LA 0.99 MK 1.09 NL 1.04 OV 1.00* ! PT 1.00* SC 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.99 HN 1.00* KP 0.92 ! LA 0.84 MK 1.04 NL 1.01 OV 1.00* ! PT 1.00* SC 1.12 ! ! ! Correcting IF 4. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.88 HN 1.00* KP 1.00* ! LA 0.84 MK 1.05 NL 1.00* OV 1.00* ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.112146Jy sigma=0.000594 ! Fit after self-cal, rms=0.110202Jy sigma=0.000593 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.741 mas, bmaj=7.462 mas, bpa=-3.744 degrees ! Estimated noise=2828.18 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000492386 Jy ! Component: 100 - total flux cleaned = -0.00056684 Jy ! Component: 150 - total flux cleaned = -0.000646897 Jy ! Component: 200 - total flux cleaned = -0.000624546 Jy ! Total flux subtracted in 200 components = -0.000624546 Jy ! Clean residual min=-0.006606 max=0.005838 Jy/beam ! Clean residual mean=0.000009 rms=0.001531 Jy/beam ! Combined flux in latest and established models = 0.0862026 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 28 components and 0.0862026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110179Jy sigma=0.000593 ! Fit after self-cal, rms=0.110213Jy sigma=0.000593 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110213Jy sigma=0.000593 ! Fit after self-cal, rms=0.110574Jy sigma=0.000592 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.754 mas, bmaj=7.487 mas, bpa=-3.544 degrees ! Estimated noise=2833.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000486347 Jy ! Component: 100 - total flux cleaned = -0.000571803 Jy ! Component: 150 - total flux cleaned = -0.000572121 Jy ! Component: 200 - total flux cleaned = -0.000571822 Jy ! Total flux subtracted in 200 components = -0.000571822 Jy ! Clean residual min=-0.006688 max=0.005722 Jy/beam ! Clean residual mean=0.000009 rms=0.001524 Jy/beam ! Combined flux in latest and established models = 0.0856308 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 30 components and 0.0856308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110554Jy sigma=0.000592 ! Fit after self-cal, rms=0.110614Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.91862e-05 Jy ! Component: 100 - total flux cleaned = -0.00010878 Jy ! Component: 150 - total flux cleaned = -0.000109584 Jy ! Component: 200 - total flux cleaned = -0.000109337 Jy ! Total flux subtracted in 200 components = -0.000109337 Jy ! Clean residual min=-0.006721 max=0.005730 Jy/beam ! Clean residual mean=0.000009 rms=0.001519 Jy/beam ! Combined flux in latest and established models = 0.0855214 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 32 components and 0.0855214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110599Jy sigma=0.000592 ! Fit after self-cal, rms=0.110604Jy sigma=0.000592 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110604Jy sigma=0.000592 ! Fit after self-cal, rms=0.110786Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=7.508 mas, bpa=-3.679 degrees ! Estimated noise=2835.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000489 Jy ! Component: 100 - total flux cleaned = -0.000564943 Jy ! Component: 150 - total flux cleaned = -0.000543942 Jy ! Component: 200 - total flux cleaned = -0.000563299 Jy ! Total flux subtracted in 200 components = -0.000563299 Jy ! Clean residual min=-0.006646 max=0.005655 Jy/beam ! Clean residual mean=0.000009 rms=0.001515 Jy/beam ! Combined flux in latest and established models = 0.0849581 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 34 components and 0.0849581 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110770Jy sigma=0.000592 ! Fit after self-cal, rms=0.110790Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000109525 Jy ! Component: 100 - total flux cleaned = -8.72819e-05 Jy ! Component: 150 - total flux cleaned = -6.62998e-05 Jy ! Component: 200 - total flux cleaned = -6.61518e-05 Jy ! Total flux subtracted in 200 components = -6.61518e-05 Jy ! Clean residual min=-0.006682 max=0.005657 Jy/beam ! Clean residual mean=0.000009 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 0.084892 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.084892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110779Jy sigma=0.000592 ! Fit after self-cal, rms=0.110779Jy sigma=0.000592 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110779Jy sigma=0.000592 ! Fit after self-cal, rms=0.110670Jy sigma=0.000592 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.969 mas, bmaj=24.1 mas, bpa=6.737 degrees ! Estimated noise=3851.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000787125 Jy ! Component: 100 - total flux cleaned = -0.000783307 Jy ! Component: 150 - total flux cleaned = -0.000781563 Jy ! Component: 200 - total flux cleaned = -0.000780406 Jy ! Total flux subtracted in 200 components = -0.000780406 Jy ! Clean residual min=-0.007221 max=0.005420 Jy/beam ! Clean residual mean=0.000018 rms=0.002049 Jy/beam ! Combined flux in latest and established models = 0.0841116 Jy selfcal ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 36 components and 0.0841116 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110654Jy sigma=0.000592 ! Fit after self-cal, rms=0.110655Jy sigma=0.000592 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000120642 Jy ! Component: 100 - total flux cleaned = -0.000123382 Jy ! Component: 150 - total flux cleaned = -0.000124844 Jy ! Component: 200 - total flux cleaned = -0.000125914 Jy ! Total flux subtracted in 200 components = -0.000125914 Jy ! Clean residual min=-0.007268 max=0.005420 Jy/beam ! Clean residual mean=0.000017 rms=0.002057 Jy/beam ! Combined flux in latest and established models = 0.0839856 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 36 components and 0.0839856 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110646Jy sigma=0.000592 ! Fit after self-cal, rms=0.110653Jy sigma=0.000592 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=7.526 mas, bpa=-3.841 degrees ! Estimated noise=2832.05 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.768 x 7.526 at -3.841 degrees (North through East) ! Clean map min=-0.0065063 max=0.078536 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.026 mas, bmaj=6.216 mas, bpa=-5.107 degrees ! Estimated noise=5164.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0646769 Jy ! Component: 100 - total flux cleaned = 0.0793075 Jy ! Component: 150 - total flux cleaned = 0.0809364 Jy ! Component: 200 - total flux cleaned = 0.0816761 Jy ! Total flux subtracted in 200 components = 0.0816761 Jy ! Clean residual min=-0.007241 max=0.008150 Jy/beam ! Clean residual mean=0.000003 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.0816761 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0816761 Jy ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=7.526 mas, bpa=-3.841 degrees ! Estimated noise=2832.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189805 Jy ! Component: 100 - total flux cleaned = 0.0021314 Jy ! Component: 150 - total flux cleaned = 0.00239162 Jy ! Component: 200 - total flux cleaned = 0.00239197 Jy ! Total flux subtracted in 200 components = 0.00239197 Jy ! Clean residual min=-0.006946 max=0.005706 Jy/beam ! Clean residual mean=0.000008 rms=0.001634 Jy/beam ! Combined flux in latest and established models = 0.0840681 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 29 components and 0.0840681 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.969 mas, bmaj=24.1 mas, bpa=6.737 degrees ! Estimated noise=3851.98 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000544967 Jy ! Component: 100 - total flux cleaned = -0.000547056 Jy ! Component: 150 - total flux cleaned = -0.000548959 Jy ! Component: 200 - total flux cleaned = -0.000550676 Jy ! Total flux subtracted in 200 components = -0.000550676 Jy ! Clean residual min=-0.007555 max=0.005585 Jy/beam ! Clean residual mean=0.000018 rms=0.002207 Jy/beam ! Combined flux in latest and established models = 0.0835174 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.52233e-06 Jy ! Component: 100 - total flux cleaned = -2.88677e-06 Jy ! Component: 150 - total flux cleaned = -4.11091e-06 Jy ! Component: 200 - total flux cleaned = -5.20932e-06 Jy ! Total flux subtracted in 200 components = -5.20932e-06 Jy ! Clean residual min=-0.007465 max=0.005466 Jy/beam ! Clean residual mean=0.000018 rms=0.002111 Jy/beam ! Combined flux in latest and established models = 0.0835122 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 36 components and 0.0835122 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.768 mas, bmaj=7.526 mas, bpa=-3.841 degrees ! Estimated noise=2832.05 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000484304 Jy ! Component: 100 - total flux cleaned = 0.00043715 Jy ! Component: 150 - total flux cleaned = 0.000436079 Jy ! Component: 200 - total flux cleaned = 0.000477066 Jy ! Total flux subtracted in 200 components = 0.000477066 Jy ! Clean residual min=-0.006919 max=0.005620 Jy/beam ! Clean residual mean=0.000008 rms=0.001537 Jy/beam ! Combined flux in latest and established models = 0.0839892 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 44 components and 0.0839892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110685Jy sigma=0.000592 ! Fit after self-cal, rms=0.110685Jy sigma=0.000592 wmodel J0026-3512_S_2017_02_19_pus_map.mod ! Writing 44 model components to file: J0026-3512_S_2017_02_19_pus_map.mod wobs J0026-3512_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0026-3512_S_2017_02_19_pus_uvs.fits wwins J0026-3512_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0026-3512_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0019919 Jy ! Component: 100 - total flux cleaned = -0.00152731 Jy ! Component: 150 - total flux cleaned = -0.000863558 Jy ! Component: 200 - total flux cleaned = -0.000260919 Jy ! Component: 250 - total flux cleaned = 1.46232e-05 Jy ! Component: 300 - total flux cleaned = 0.000272225 Jy ! Component: 350 - total flux cleaned = 0.000455688 Jy ! Component: 400 - total flux cleaned = 0.000688695 Jy ! Component: 450 - total flux cleaned = 0.000743078 Jy ! Component: 500 - total flux cleaned = 0.000742815 Jy ! Component: 550 - total flux cleaned = 0.000844362 Jy ! Component: 600 - total flux cleaned = 0.000940582 Jy ! Component: 650 - total flux cleaned = 0.00107758 Jy ! Component: 700 - total flux cleaned = 0.00129988 Jy ! Component: 750 - total flux cleaned = 0.00159947 Jy ! Component: 800 - total flux cleaned = 0.0018892 Jy ! Component: 850 - total flux cleaned = 0.0022918 Jy ! Component: 900 - total flux cleaned = 0.0024871 Jy ! Component: 950 - total flux cleaned = 0.00279283 Jy ! Component: 1000 - total flux cleaned = 0.0030904 Jy ! Component: 1050 - total flux cleaned = 0.00327115 Jy ! Component: 1100 - total flux cleaned = 0.00334155 Jy ! Component: 1150 - total flux cleaned = 0.00337692 Jy ! Component: 1200 - total flux cleaned = 0.0032412 Jy ! Component: 1250 - total flux cleaned = 0.00307356 Jy ! Component: 1300 - total flux cleaned = 0.00297446 Jy ! Component: 1350 - total flux cleaned = 0.00274608 Jy ! Component: 1400 - total flux cleaned = 0.00255227 Jy ! Component: 1450 - total flux cleaned = 0.00236013 Jy ! Component: 1500 - total flux cleaned = 0.0021376 Jy ! Component: 1550 - total flux cleaned = 0.00194727 Jy ! Component: 1600 - total flux cleaned = 0.00169386 Jy ! Component: 1650 - total flux cleaned = 0.00147258 Jy ! Component: 1700 - total flux cleaned = 0.00125049 Jy ! Component: 1750 - total flux cleaned = 0.00112335 Jy ! Component: 1800 - total flux cleaned = 0.000963475 Jy ! Component: 1850 - total flux cleaned = 0.000899411 Jy ! Component: 1900 - total flux cleaned = 0.000802809 Jy ! Component: 1950 - total flux cleaned = 0.00070558 Jy ! Component: 2000 - total flux cleaned = 0.000640354 Jy ! Component: 2050 - total flux cleaned = 0.000607675 Jy ! Component: 2100 - total flux cleaned = 0.000608262 Jy ! Component: 2150 - total flux cleaned = 0.000642561 Jy ! Component: 2200 - total flux cleaned = 0.000677505 Jy ! Component: 2250 - total flux cleaned = 0.000712645 Jy ! Component: 2300 - total flux cleaned = 0.000784446 Jy ! Component: 2350 - total flux cleaned = 0.000821143 Jy ! Component: 2400 - total flux cleaned = 0.000858687 Jy ! Component: 2450 - total flux cleaned = 0.000896481 Jy ! Component: 2500 - total flux cleaned = 0.000973768 Jy ! Component: 2550 - total flux cleaned = 0.0010137 Jy ! Component: 2600 - total flux cleaned = 0.00105425 Jy ! Component: 2650 - total flux cleaned = 0.00105449 Jy ! Component: 2700 - total flux cleaned = 0.00113845 Jy ! Component: 2750 - total flux cleaned = 0.00113866 Jy ! Component: 2800 - total flux cleaned = 0.00113897 Jy ! Component: 2850 - total flux cleaned = 0.00127356 Jy ! Component: 2900 - total flux cleaned = 0.00136547 Jy ! Component: 2950 - total flux cleaned = 0.00150674 Jy ! Component: 3000 - total flux cleaned = 0.00165126 Jy ! Component: 3050 - total flux cleaned = 0.00179952 Jy ! Component: 3100 - total flux cleaned = 0.00190092 Jy ! Component: 3150 - total flux cleaned = 0.00205669 Jy ! Component: 3200 - total flux cleaned = 0.00216289 Jy ! Component: 3250 - total flux cleaned = 0.00232617 Jy ! Component: 3300 - total flux cleaned = 0.00249313 Jy ! Component: 3350 - total flux cleaned = 0.00266545 Jy ! Component: 3400 - total flux cleaned = 0.00284253 Jy ! Component: 3450 - total flux cleaned = 0.00302393 Jy ! Component: 3500 - total flux cleaned = 0.00314865 Jy ! Component: 3550 - total flux cleaned = 0.00327662 Jy ! Component: 3600 - total flux cleaned = 0.00334173 Jy ! Component: 3650 - total flux cleaned = 0.00347601 Jy ! Component: 3700 - total flux cleaned = 0.00368224 Jy ! Component: 3750 - total flux cleaned = 0.00382401 Jy ! Component: 3800 - total flux cleaned = 0.00396964 Jy ! Component: 3850 - total flux cleaned = 0.00412013 Jy ! Component: 3900 - total flux cleaned = 0.00427263 Jy ! Component: 3950 - total flux cleaned = 0.00443046 Jy ! Component: 4000 - total flux cleaned = 0.0045914 Jy ! Component: 4050 - total flux cleaned = 0.00475662 Jy ! Total flux subtracted in 4096 components = 0.00501396 Jy ! Clean residual min=-0.004574 max=0.004951 Jy/beam ! Clean residual mean=-0.000017 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.0890032 Jy keep ! Adding 174 model components to the UV plane model. ! The established model now contains 218 components and 0.0890032 Jy ![Exited script file: muppet] wmap "J0026-3512_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.768 x 7.526 at -3.841 degrees (North through East) ! Clean map min=-0.010742 max=0.078179 Jy/beam ! Writing clean map to FITS file: J0026-3512_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0781786 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00121765 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.67258 4.67258 9.34516 18.6903 37.3806 74.7612 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0036 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.078 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.768 x 7.526 at -3.841 degrees (North through East) ! Clean map min=-0.010742 max=0.078179 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0026-3512_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:39:03 2019