! Started logfile: J0025-2602_S_2017_06_10_pus_uvs.log on Mon May 6 14:39:39 2019 obs J0025-2602_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0025-2602_S_2017_06_10_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.974941 visibilities/baseline/integration-bin. ! Found source: J0025-2602 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 16496 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0025-2602_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 107 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 576 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.755109Jy sigma=0.005651 ! Fit after self-cal, rms=0.661247Jy sigma=0.004893 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.435 mas, bmaj=6.888 mas, bpa=-4.566 degrees ! Estimated noise=1266.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.323153 Jy ! Component: 100 - total flux cleaned = 0.477591 Jy ! Total flux subtracted in 100 components = 0.477591 Jy ! Clean residual min=-0.052038 max=0.087235 Jy/beam ! Clean residual mean=-0.000649 rms=0.016156 Jy/beam ! Combined flux in latest and established models = 0.477591 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.477591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.374136Jy sigma=0.003065 ! Fit after self-cal, rms=0.373856Jy sigma=0.003063 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.888 mas, bmaj=7.973 mas, bpa=-4.031 degrees ! Estimated noise=895.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.185624 Jy ! Component: 100 - total flux cleaned = 0.289455 Jy ! Component: 150 - total flux cleaned = 0.349196 Jy ! Component: 200 - total flux cleaned = 0.383576 Jy ! Total flux subtracted in 200 components = 0.383576 Jy ! Clean residual min=-0.063326 max=0.093019 Jy/beam ! Clean residual mean=-0.000712 rms=0.020273 Jy/beam ! Combined flux in latest and established models = 0.861167 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 67 components and 0.861168 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.286889Jy sigma=0.002235 ! Fit after self-cal, rms=0.286712Jy sigma=0.002233 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.84 FD 0.88 HN 1.62 KP 0.85 ! LA 0.92 MK 1.35 NL 1.12 OV 1.12 ! PT 0.88 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.56 KP 0.82 ! LA 0.91 MK 1.43 NL 1.31 OV 1.19 ! PT 0.79 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00 HN 1.71 KP 0.85 ! LA 0.97 MK 1.50 NL 1.25 OV 1.10 ! PT 0.72 SC 1.08 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.77 KP 1.00* ! LA 1.00* MK 1.48 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.286712Jy sigma=0.002233 ! Fit after self-cal, rms=0.257795Jy sigma=0.001865 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.172 mas, bmaj=8.398 mas, bpa=-0.7208 degrees ! Estimated noise=1001.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00152014 Jy ! Component: 100 - total flux cleaned = 0.000151677 Jy ! Component: 150 - total flux cleaned = -0.00181199 Jy ! Component: 200 - total flux cleaned = -0.00359571 Jy ! Total flux subtracted in 200 components = -0.00359571 Jy ! Clean residual min=-0.055190 max=0.064593 Jy/beam ! Clean residual mean=-0.000394 rms=0.017257 Jy/beam ! Combined flux in latest and established models = 0.857572 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.857572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.255655Jy sigma=0.001861 ! Fit after self-cal, rms=0.257414Jy sigma=0.001857 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257414Jy sigma=0.001857 ! Fit after self-cal, rms=0.264298Jy sigma=0.001722 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.222 mas, bmaj=8.574 mas, bpa=-0.2134 degrees ! Estimated noise=1045.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175154 Jy ! Component: 100 - total flux cleaned = 0.0167899 Jy ! Component: 150 - total flux cleaned = 0.0155368 Jy ! Component: 200 - total flux cleaned = 0.014954 Jy ! Total flux subtracted in 200 components = 0.014954 Jy ! Clean residual min=-0.054300 max=0.063842 Jy/beam ! Clean residual mean=-0.000378 rms=0.016566 Jy/beam ! Combined flux in latest and established models = 0.872526 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 77 components and 0.872526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.261268Jy sigma=0.001716 ! Fit after self-cal, rms=0.261256Jy sigma=0.001715 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.73781e-05 Jy ! Component: 100 - total flux cleaned = -0.000526778 Jy ! Component: 150 - total flux cleaned = -0.00130813 Jy ! Component: 200 - total flux cleaned = -0.00180669 Jy ! Total flux subtracted in 200 components = -0.00180669 Jy ! Clean residual min=-0.053105 max=0.063671 Jy/beam ! Clean residual mean=-0.000379 rms=0.016568 Jy/beam ! Combined flux in latest and established models = 0.870719 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 78 components and 0.870719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260333Jy sigma=0.001714 ! Fit after self-cal, rms=0.260409Jy sigma=0.001713 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260409Jy sigma=0.001713 ! Fit after self-cal, rms=0.274945Jy sigma=0.001688 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.271 mas, bmaj=8.716 mas, bpa=-0.2052 degrees ! Estimated noise=1065.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260337 Jy ! Component: 100 - total flux cleaned = 0.00173655 Jy ! Component: 150 - total flux cleaned = 0.000992885 Jy ! Component: 200 - total flux cleaned = 0.000753103 Jy ! Total flux subtracted in 200 components = 0.000753103 Jy ! Clean residual min=-0.053652 max=0.062945 Jy/beam ! Clean residual mean=-0.000416 rms=0.016673 Jy/beam ! Combined flux in latest and established models = 0.871472 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 83 components and 0.871472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273717Jy sigma=0.001688 ! Fit after self-cal, rms=0.273794Jy sigma=0.001687 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000208595 Jy ! Component: 100 - total flux cleaned = -0.000235271 Jy ! Component: 150 - total flux cleaned = -0.000437007 Jy ! Component: 200 - total flux cleaned = -0.000635408 Jy ! Total flux subtracted in 200 components = -0.000635408 Jy ! Clean residual min=-0.053504 max=0.062789 Jy/beam ! Clean residual mean=-0.000417 rms=0.016660 Jy/beam ! Combined flux in latest and established models = 0.870837 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 84 components and 0.870837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273258Jy sigma=0.001686 ! Fit after self-cal, rms=0.273277Jy sigma=0.001686 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273277Jy sigma=0.001686 ! Fit after self-cal, rms=0.278383Jy sigma=0.001685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.569 mas, bmaj=23.11 mas, bpa=1.318 degrees ! Estimated noise=1176.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00374886 Jy ! Component: 100 - total flux cleaned = 0.00374345 Jy ! Component: 150 - total flux cleaned = 0.00374476 Jy ! Component: 200 - total flux cleaned = 0.00395819 Jy ! Total flux subtracted in 200 components = 0.00395819 Jy ! Clean residual min=-0.091789 max=0.078771 Jy/beam ! Clean residual mean=-0.000756 rms=0.028671 Jy/beam ! Combined flux in latest and established models = 0.874795 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 86 components and 0.874795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278694Jy sigma=0.001685 ! Fit after self-cal, rms=0.278055Jy sigma=0.001683 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000849929 Jy ! Component: 100 - total flux cleaned = -0.000828066 Jy ! Component: 150 - total flux cleaned = -0.000821147 Jy ! Component: 200 - total flux cleaned = -0.000821052 Jy ! Total flux subtracted in 200 components = -0.000821052 Jy ! Clean residual min=-0.092047 max=0.078665 Jy/beam ! Clean residual mean=-0.000757 rms=0.028667 Jy/beam ! Combined flux in latest and established models = 0.873974 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 86 components and 0.873974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278669Jy sigma=0.001683 ! Fit after self-cal, rms=0.278071Jy sigma=0.001682 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.304 mas, bmaj=8.805 mas, bpa=-0.2473 degrees ! Estimated noise=1082.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.304 x 8.805 at -0.2473 degrees (North through East) ! Clean map min=-0.053986 max=0.52652 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.278071Jy sigma=0.001682 ! Fit after self-cal, rms=0.285530Jy sigma=0.001658 ! Inverting map and beam ! Estimated beam: bmin=3.278 mas, bmaj=8.772 mas, bpa=-0.2645 degrees ! Estimated noise=1077.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0044669 Jy ! Component: 100 - total flux cleaned = 0.00344948 Jy ! Component: 150 - total flux cleaned = 0.00263441 Jy ! Component: 200 - total flux cleaned = 0.00190323 Jy ! Total flux subtracted in 200 components = 0.00190323 Jy ! Clean residual min=-0.053768 max=0.062002 Jy/beam ! Clean residual mean=-0.000402 rms=0.016756 Jy/beam ! Combined flux in latest and established models = 0.875877 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.875877 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.284283Jy sigma=0.001658 ! Fit after self-cal, rms=0.284285Jy sigma=0.001658 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000317627 Jy ! Component: 100 - total flux cleaned = -0.000500959 Jy ! Component: 150 - total flux cleaned = -0.000810747 Jy ! Component: 200 - total flux cleaned = -0.00110313 Jy ! Total flux subtracted in 200 components = -0.00110313 Jy ! Clean residual min=-0.053672 max=0.061884 Jy/beam ! Clean residual mean=-0.000405 rms=0.016752 Jy/beam ! Combined flux in latest and established models = 0.874774 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 94 components and 0.874774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283886Jy sigma=0.001657 ! Fit after self-cal, rms=0.283889Jy sigma=0.001657 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283889Jy sigma=0.001657 ! Fit after self-cal, rms=0.292162Jy sigma=0.001656 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.689 mas, bmaj=7.229 mas, bpa=-0.3167 degrees ! Estimated noise=1764.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.427356 Jy ! Component: 100 - total flux cleaned = 0.614076 Jy ! Component: 150 - total flux cleaned = 0.717902 Jy ! Component: 200 - total flux cleaned = 0.777015 Jy ! Total flux subtracted in 200 components = 0.777015 Jy ! Clean residual min=-0.037713 max=0.048806 Jy/beam ! Clean residual mean=-0.000388 rms=0.011658 Jy/beam ! Combined flux in latest and established models = 0.777015 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 0.777015 Jy ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=8.89 mas, bpa=-0.04939 degrees ! Estimated noise=1098.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490154 Jy ! Component: 100 - total flux cleaned = 0.0718886 Jy ! Component: 150 - total flux cleaned = 0.0828188 Jy ! Component: 200 - total flux cleaned = 0.086779 Jy ! Total flux subtracted in 200 components = 0.086779 Jy ! Clean residual min=-0.054472 max=0.063874 Jy/beam ! Clean residual mean=-0.000444 rms=0.017136 Jy/beam ! Combined flux in latest and established models = 0.863794 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 62 components and 0.863794 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.592 mas, bmaj=23.29 mas, bpa=1.285 degrees ! Estimated noise=1186.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00800302 Jy ! Component: 100 - total flux cleaned = 0.00799679 Jy ! Component: 150 - total flux cleaned = 0.00800506 Jy ! Component: 200 - total flux cleaned = 0.00801269 Jy ! Total flux subtracted in 200 components = 0.00801269 Jy ! Clean residual min=-0.093021 max=0.079298 Jy/beam ! Clean residual mean=-0.000772 rms=0.028869 Jy/beam ! Combined flux in latest and established models = 0.871807 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.87323e-06 Jy ! Component: 100 - total flux cleaned = 7.50451e-06 Jy ! Component: 150 - total flux cleaned = 0.000124942 Jy ! Component: 200 - total flux cleaned = 0.000231509 Jy ! Total flux subtracted in 200 components = 0.000231509 Jy ! Clean residual min=-0.093110 max=0.079210 Jy/beam ! Clean residual mean=-0.000770 rms=0.028847 Jy/beam ! Combined flux in latest and established models = 0.872038 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 68 components and 0.872038 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=8.89 mas, bpa=-0.04939 degrees ! Estimated noise=1098.89 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00499001 Jy ! Component: 100 - total flux cleaned = -0.00503223 Jy ! Component: 150 - total flux cleaned = -0.00481849 Jy ! Component: 200 - total flux cleaned = -0.00461443 Jy ! Total flux subtracted in 200 components = -0.00461443 Jy ! Clean residual min=-0.054410 max=0.062512 Jy/beam ! Clean residual mean=-0.000434 rms=0.017094 Jy/beam ! Combined flux in latest and established models = 0.867424 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 73 components and 0.867424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.290850Jy sigma=0.001658 ! Fit after self-cal, rms=0.290509Jy sigma=0.001658 wmodel J0025-2602_S_2017_06_10_pus_map.mod ! Writing 73 model components to file: J0025-2602_S_2017_06_10_pus_map.mod wobs J0025-2602_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0025-2602_S_2017_06_10_pus_uvs.fits wwins J0025-2602_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0025-2602_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.0139351 Jy ! Component: 100 - total flux cleaned = 0.0101394 Jy ! Component: 150 - total flux cleaned = 0.0109868 Jy ! Component: 200 - total flux cleaned = 0.0126168 Jy ! Component: 250 - total flux cleaned = 0.0149247 Jy ! Component: 300 - total flux cleaned = 0.0193667 Jy ! Component: 350 - total flux cleaned = 0.0243627 Jy ! Component: 400 - total flux cleaned = 0.0298722 Jy ! Component: 450 - total flux cleaned = 0.0364953 Jy ! Component: 500 - total flux cleaned = 0.0415934 Jy ! Component: 550 - total flux cleaned = 0.0446805 Jy ! Component: 600 - total flux cleaned = 0.0464774 Jy ! Component: 650 - total flux cleaned = 0.0487908 Jy ! Component: 700 - total flux cleaned = 0.0493563 Jy ! Component: 750 - total flux cleaned = 0.0510059 Jy ! Component: 800 - total flux cleaned = 0.051018 Jy ! Component: 850 - total flux cleaned = 0.0525945 Jy ! Component: 900 - total flux cleaned = 0.0536067 Jy ! Component: 950 - total flux cleaned = 0.0526203 Jy ! Component: 1000 - total flux cleaned = 0.0535962 Jy ! Component: 1050 - total flux cleaned = 0.053113 Jy ! Component: 1100 - total flux cleaned = 0.0521777 Jy ! Component: 1150 - total flux cleaned = 0.0508189 Jy ! Component: 1200 - total flux cleaned = 0.0499297 Jy ! Component: 1250 - total flux cleaned = 0.0490637 Jy ! Component: 1300 - total flux cleaned = 0.0482105 Jy ! Component: 1350 - total flux cleaned = 0.0469474 Jy ! Component: 1400 - total flux cleaned = 0.0469429 Jy ! Component: 1450 - total flux cleaned = 0.0453249 Jy ! Component: 1500 - total flux cleaned = 0.0453268 Jy ! Component: 1550 - total flux cleaned = 0.04493 Jy ! Component: 1600 - total flux cleaned = 0.0437709 Jy ! Component: 1650 - total flux cleaned = 0.0437705 Jy ! Component: 1700 - total flux cleaned = 0.043399 Jy ! Component: 1750 - total flux cleaned = 0.0437636 Jy ! Component: 1800 - total flux cleaned = 0.0441153 Jy ! Component: 1850 - total flux cleaned = 0.0434079 Jy ! Component: 1900 - total flux cleaned = 0.0434148 Jy ! Component: 1950 - total flux cleaned = 0.0444419 Jy ! Component: 2000 - total flux cleaned = 0.0444343 Jy ! Component: 2050 - total flux cleaned = 0.0440909 Jy ! Component: 2100 - total flux cleaned = 0.0434373 Jy ! Component: 2150 - total flux cleaned = 0.0434393 Jy ! Component: 2200 - total flux cleaned = 0.0431211 Jy ! Component: 2250 - total flux cleaned = 0.0440638 Jy ! Component: 2300 - total flux cleaned = 0.0431334 Jy ! Component: 2350 - total flux cleaned = 0.0437465 Jy ! Component: 2400 - total flux cleaned = 0.0425395 Jy ! Component: 2450 - total flux cleaned = 0.0437381 Jy ! Component: 2500 - total flux cleaned = 0.0437357 Jy ! Component: 2550 - total flux cleaned = 0.0428633 Jy ! Component: 2600 - total flux cleaned = 0.0431519 Jy ! Component: 2650 - total flux cleaned = 0.0425832 Jy ! Component: 2700 - total flux cleaned = 0.0423008 Jy ! Component: 2750 - total flux cleaned = 0.0411893 Jy ! Component: 2800 - total flux cleaned = 0.040368 Jy ! Component: 2850 - total flux cleaned = 0.0395535 Jy ! Component: 2900 - total flux cleaned = 0.0384832 Jy ! Component: 2950 - total flux cleaned = 0.038749 Jy ! Component: 3000 - total flux cleaned = 0.0376999 Jy ! Component: 3050 - total flux cleaned = 0.0366601 Jy ! Component: 3100 - total flux cleaned = 0.0361484 Jy ! Component: 3150 - total flux cleaned = 0.0353882 Jy ! Component: 3200 - total flux cleaned = 0.0353864 Jy ! Component: 3250 - total flux cleaned = 0.0353843 Jy ! Component: 3300 - total flux cleaned = 0.0348867 Jy ! Component: 3350 - total flux cleaned = 0.0351317 Jy ! Component: 3400 - total flux cleaned = 0.034406 Jy ! Component: 3450 - total flux cleaned = 0.0346448 Jy ! Component: 3500 - total flux cleaned = 0.034409 Jy ! Component: 3550 - total flux cleaned = 0.0348788 Jy ! Component: 3600 - total flux cleaned = 0.0346443 Jy ! Component: 3650 - total flux cleaned = 0.0346433 Jy ! Component: 3700 - total flux cleaned = 0.0344164 Jy ! Component: 3750 - total flux cleaned = 0.0341929 Jy ! Component: 3800 - total flux cleaned = 0.0339724 Jy ! Component: 3850 - total flux cleaned = 0.0346396 Jy ! Component: 3900 - total flux cleaned = 0.0352991 Jy ! Component: 3950 - total flux cleaned = 0.0352971 Jy ! Component: 4000 - total flux cleaned = 0.0350823 Jy ! Component: 4050 - total flux cleaned = 0.0350829 Jy ! Total flux subtracted in 4096 components = 0.035082 Jy ! Clean residual min=-0.012322 max=0.011883 Jy/beam ! Clean residual mean=-0.000160 rms=0.004898 Jy/beam ! Combined flux in latest and established models = 0.902506 Jy keep ! Adding 628 model components to the UV plane model. ! The established model now contains 701 components and 0.902506 Jy ![Exited script file: muppet] wmap "J0025-2602_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 8.89 at -0.04939 degrees (North through East) ! Clean map min=-0.033185 max=0.56999 Jy/beam ! Writing clean map to FITS file: J0025-2602_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.569993 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00467602 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.46109 2.46109 4.92218 9.84437 19.6887 39.3775 78.7549 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.569 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.325 x 8.89 at -0.04939 degrees (North through East) ! Clean map min=-0.033185 max=0.56999 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0025-2602_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:39:45 2019