! Started logfile: J0024-4202_S_2017_01_21_pus_uvs.log on Sun May 5 15:42:50 2019 obs J0024-4202_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0024-4202_S_2017_01_21_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.423997 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0024-4202 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 8792 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0024-4202_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 514 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 514 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 442 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 729 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.837528Jy sigma=0.004484 ! Fit after self-cal, rms=0.828489Jy sigma=0.004428 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.227 mas, bmaj=8.264 mas, bpa=-0.06038 degrees ! Estimated noise=2481.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.794437 Jy ! Component: 100 - total flux cleaned = 1.16779 Jy ! Total flux subtracted in 100 components = 1.16779 Jy ! Clean residual min=-0.156833 max=0.228426 Jy/beam ! Clean residual mean=0.004069 rms=0.054082 Jy/beam ! Combined flux in latest and established models = 1.16779 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 1.16779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.674770Jy sigma=0.003604 ! Fit after self-cal, rms=0.673612Jy sigma=0.003600 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.795 mas, bmaj=9.241 mas, bpa=0.2829 degrees ! Estimated noise=1626.96 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.391037 Jy ! Component: 100 - total flux cleaned = 0.599048 Jy ! Component: 150 - total flux cleaned = 0.717767 Jy ! Component: 200 - total flux cleaned = 0.786347 Jy ! Total flux subtracted in 200 components = 0.786347 Jy ! Clean residual min=-0.119340 max=0.260792 Jy/beam ! Clean residual mean=0.005048 rms=0.047132 Jy/beam ! Combined flux in latest and established models = 1.95414 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 80 components and 1.95414 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.398954Jy sigma=0.002126 ! Fit after self-cal, rms=0.397524Jy sigma=0.002121 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.25 HN 1.00* LA 0.95 ! MK 1.13 NL 1.00* OV 0.87 PT 0.90 ! SC 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.31 HN 1.00* LA 0.92 ! MK 1.16 NL 1.00* OV 0.90 PT 0.88 ! SC 0.90 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.37 HN 1.00* LA 0.89 ! MK 1.21 NL 1.37 OV 0.82 PT 0.87 ! SC 0.82 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.41 HN 1.00* LA 1.00* ! MK 1.06 NL 1.00* OV 0.81 PT 0.94 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.397524Jy sigma=0.002121 ! Fit after self-cal, rms=0.323893Jy sigma=0.001416 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.862 mas, bmaj=9.174 mas, bpa=2.005 degrees ! Estimated noise=1638.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-52, -41.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.114351 Jy ! Component: 100 - total flux cleaned = 0.162932 Jy ! Component: 150 - total flux cleaned = 0.194579 Jy ! Component: 200 - total flux cleaned = 0.208632 Jy ! Total flux subtracted in 200 components = 0.208632 Jy ! Clean residual min=-0.072540 max=0.071167 Jy/beam ! Clean residual mean=0.000498 rms=0.018144 Jy/beam ! Combined flux in latest and established models = 2.16277 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 102 components and 2.16277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274672Jy sigma=0.001175 ! Fit after self-cal, rms=0.273300Jy sigma=0.001156 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273300Jy sigma=0.001156 ! Fit after self-cal, rms=0.234576Jy sigma=0.001059 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.825 mas, bmaj=9.042 mas, bpa=1.996 degrees ! Estimated noise=1614.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0319198 Jy ! Component: 100 - total flux cleaned = 0.0436775 Jy ! Component: 150 - total flux cleaned = 0.048978 Jy ! Component: 200 - total flux cleaned = 0.0521262 Jy ! Total flux subtracted in 200 components = 0.0521262 Jy ! Clean residual min=-0.060196 max=0.058233 Jy/beam ! Clean residual mean=-0.001213 rms=0.014009 Jy/beam ! Combined flux in latest and established models = 2.2149 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 113 components and 2.2149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227686Jy sigma=0.001031 ! Fit after self-cal, rms=0.227019Jy sigma=0.001027 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00799892 Jy ! Component: 100 - total flux cleaned = 0.0103984 Jy ! Component: 150 - total flux cleaned = 0.0112932 Jy ! Component: 200 - total flux cleaned = 0.0129777 Jy ! Total flux subtracted in 200 components = 0.0129777 Jy ! Clean residual min=-0.055883 max=0.055897 Jy/beam ! Clean residual mean=-0.001356 rms=0.013642 Jy/beam ! Combined flux in latest and established models = 2.22788 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 119 components and 2.22788 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224885Jy sigma=0.001017 ! Fit after self-cal, rms=0.224808Jy sigma=0.001017 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224808Jy sigma=0.001017 ! Fit after self-cal, rms=0.219486Jy sigma=0.001008 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.824 mas, bmaj=9.006 mas, bpa=2.061 degrees ! Estimated noise=1611.75 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0129606 Jy ! Component: 100 - total flux cleaned = 0.017247 Jy ! Component: 150 - total flux cleaned = 0.0193205 Jy ! Component: 200 - total flux cleaned = 0.0200888 Jy ! Total flux subtracted in 200 components = 0.0200888 Jy ! Clean residual min=-0.055194 max=0.053864 Jy/beam ! Clean residual mean=-0.001171 rms=0.013176 Jy/beam ! Combined flux in latest and established models = 2.24796 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 129 components and 2.24797 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217098Jy sigma=0.000997 ! Fit after self-cal, rms=0.216990Jy sigma=0.000996 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00262466 Jy ! Component: 100 - total flux cleaned = 0.00410457 Jy ! Component: 150 - total flux cleaned = 0.00478744 Jy ! Component: 200 - total flux cleaned = 0.00510961 Jy ! Total flux subtracted in 200 components = 0.00510961 Jy ! Clean residual min=-0.053676 max=0.052365 Jy/beam ! Clean residual mean=-0.001241 rms=0.013001 Jy/beam ! Combined flux in latest and established models = 2.25307 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 134 components and 2.25307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215820Jy sigma=0.000990 ! Fit after self-cal, rms=0.215803Jy sigma=0.000989 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215803Jy sigma=0.000989 ! Fit after self-cal, rms=0.213966Jy sigma=0.000986 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.421 mas, bmaj=27.23 mas, bpa=9.009 degrees ! Estimated noise=2164.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0124205 Jy ! Component: 100 - total flux cleaned = 0.0180572 Jy ! Component: 150 - total flux cleaned = 0.0216194 Jy ! Component: 200 - total flux cleaned = 0.0232305 Jy ! Total flux subtracted in 200 components = 0.0232305 Jy ! Clean residual min=-0.071099 max=0.048931 Jy/beam ! Clean residual mean=-0.002592 rms=0.019614 Jy/beam ! Combined flux in latest and established models = 2.27631 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 151 components and 2.27631 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213603Jy sigma=0.000987 ! Fit after self-cal, rms=0.213542Jy sigma=0.000987 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267736 Jy ! Component: 100 - total flux cleaned = 0.00319939 Jy ! Component: 150 - total flux cleaned = 0.00349553 Jy ! Component: 200 - total flux cleaned = 0.00387533 Jy ! Total flux subtracted in 200 components = 0.00387533 Jy ! Clean residual min=-0.069305 max=0.048650 Jy/beam ! Clean residual mean=-0.002684 rms=0.019554 Jy/beam ! Combined flux in latest and established models = 2.28018 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 154 components and 2.28018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213524Jy sigma=0.000987 ! Fit after self-cal, rms=0.213530Jy sigma=0.000987 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.815 mas, bmaj=8.956 mas, bpa=2.252 degrees ! Estimated noise=1605 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.815 x 8.956 at 2.252 degrees (North through East) ! Clean map min=-0.050309 max=1.0114 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213530Jy sigma=0.000987 ! Fit after self-cal, rms=0.198040Jy sigma=0.000890 ! Inverting map and beam ! Estimated beam: bmin=2.818 mas, bmaj=8.969 mas, bpa=2.378 degrees ! Estimated noise=1604.43 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106492 Jy ! Component: 100 - total flux cleaned = 0.000641437 Jy ! Component: 150 - total flux cleaned = 0.000646871 Jy ! Component: 200 - total flux cleaned = 0.00134448 Jy ! Total flux subtracted in 200 components = 0.00134448 Jy ! Clean residual min=-0.052456 max=0.050570 Jy/beam ! Clean residual mean=-0.000990 rms=0.012700 Jy/beam ! Combined flux in latest and established models = 2.28153 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 157 components and 2.28153 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196591Jy sigma=0.000881 ! Fit after self-cal, rms=0.196682Jy sigma=0.000881 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.35364e-06 Jy ! Component: 100 - total flux cleaned = 0.000333785 Jy ! Component: 150 - total flux cleaned = 0.000953698 Jy ! Component: 200 - total flux cleaned = 0.00125385 Jy ! Total flux subtracted in 200 components = 0.00125385 Jy ! Clean residual min=-0.051471 max=0.049339 Jy/beam ! Clean residual mean=-0.001020 rms=0.012578 Jy/beam ! Combined flux in latest and established models = 2.28278 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 161 components and 2.28278 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195765Jy sigma=0.000875 ! Fit after self-cal, rms=0.195866Jy sigma=0.000875 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.195866Jy sigma=0.000875 ! Fit after self-cal, rms=0.194999Jy sigma=0.000874 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=7.937 mas, bpa=1.837 degrees ! Estimated noise=2441.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.797848 Jy ! Component: 100 - total flux cleaned = 1.16572 Jy ! Component: 150 - total flux cleaned = 1.39662 Jy ! Component: 200 - total flux cleaned = 1.56247 Jy ! Total flux subtracted in 200 components = 1.56247 Jy ! Clean residual min=-0.105196 max=0.142776 Jy/beam ! Clean residual mean=0.002073 rms=0.030205 Jy/beam ! Combined flux in latest and established models = 1.56247 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 60 model components to the UV plane model. ! The established model now contains 60 components and 1.56247 Jy ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=8.921 mas, bpa=2.544 degrees ! Estimated noise=1595.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.195523 Jy ! Component: 100 - total flux cleaned = 0.319886 Jy ! Component: 150 - total flux cleaned = 0.408222 Jy ! Component: 200 - total flux cleaned = 0.473908 Jy ! Total flux subtracted in 200 components = 0.473908 Jy ! Clean residual min=-0.063803 max=0.081172 Jy/beam ! Clean residual mean=0.000929 rms=0.018692 Jy/beam ! Combined flux in latest and established models = 2.03638 Jy ! Adding 71 model components to the UV plane model. ! The established model now contains 112 components and 2.03638 Jy ! Inverting map ! Added new window around map position (-25.5, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0798716 Jy ! Component: 100 - total flux cleaned = 0.127658 Jy ! Component: 150 - total flux cleaned = 0.161892 Jy ! Component: 200 - total flux cleaned = 0.177046 Jy ! Total flux subtracted in 200 components = 0.177046 Jy ! Clean residual min=-0.046271 max=0.048022 Jy/beam ! Clean residual mean=-0.000037 rms=0.012456 Jy/beam ! Combined flux in latest and established models = 2.21343 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 130 components and 2.21342 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.411 mas, bmaj=27.22 mas, bpa=9.181 degrees ! Estimated noise=2161.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0330349 Jy ! Component: 100 - total flux cleaned = 0.0455537 Jy ! Component: 150 - total flux cleaned = 0.0520472 Jy ! Component: 200 - total flux cleaned = 0.0579763 Jy ! Total flux subtracted in 200 components = 0.0579763 Jy ! Clean residual min=-0.046131 max=0.052903 Jy/beam ! Clean residual mean=-0.001061 rms=0.017540 Jy/beam ! Combined flux in latest and established models = 2.2714 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418446 Jy ! Component: 100 - total flux cleaned = 0.00778698 Jy ! Component: 150 - total flux cleaned = 0.0103124 Jy ! Component: 200 - total flux cleaned = 0.0125178 Jy ! Total flux subtracted in 200 components = 0.0125178 Jy ! Clean residual min=-0.046261 max=0.052055 Jy/beam ! Clean residual mean=-0.001380 rms=0.017076 Jy/beam ! Combined flux in latest and established models = 2.28392 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 155 components and 2.28392 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=8.921 mas, bpa=2.544 degrees ! Estimated noise=1595.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00799583 Jy ! Component: 100 - total flux cleaned = -0.0106682 Jy ! Component: 150 - total flux cleaned = -0.0107004 Jy ! Component: 200 - total flux cleaned = -0.00932274 Jy ! Total flux subtracted in 200 components = -0.00932274 Jy ! Clean residual min=-0.040356 max=0.043324 Jy/beam ! Clean residual mean=-0.000543 rms=0.010693 Jy/beam ! Combined flux in latest and established models = 2.2746 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 172 components and 2.2746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.180374Jy sigma=0.000796 ! Fit after self-cal, rms=0.179362Jy sigma=0.000784 wmodel J0024-4202_S_2017_01_21_pus_map.mod ! Writing 172 model components to file: J0024-4202_S_2017_01_21_pus_map.mod wobs J0024-4202_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0024-4202_S_2017_01_21_pus_uvs.fits wwins J0024-4202_S_2017_01_21_pus_map.win ! wwins: Wrote 3 windows to J0024-4202_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00284418 Jy ! Component: 100 - total flux cleaned = -0.00610362 Jy ! Component: 150 - total flux cleaned = -0.0101103 Jy ! Component: 200 - total flux cleaned = -0.0132914 Jy ! Component: 250 - total flux cleaned = -0.0142567 Jy ! Component: 300 - total flux cleaned = -0.0151446 Jy ! Component: 350 - total flux cleaned = -0.0168416 Jy ! Component: 400 - total flux cleaned = -0.0168546 Jy ! Component: 450 - total flux cleaned = -0.0172424 Jy ! Component: 500 - total flux cleaned = -0.0176042 Jy ! Component: 550 - total flux cleaned = -0.0162292 Jy ! Component: 600 - total flux cleaned = -0.0155879 Jy ! Component: 650 - total flux cleaned = -0.0143381 Jy ! Component: 700 - total flux cleaned = -0.0128509 Jy ! Component: 750 - total flux cleaned = -0.012567 Jy ! Component: 800 - total flux cleaned = -0.0128418 Jy ! Component: 850 - total flux cleaned = -0.012832 Jy ! Component: 900 - total flux cleaned = -0.0118047 Jy ! Component: 950 - total flux cleaned = -0.0118046 Jy ! Component: 1000 - total flux cleaned = -0.011074 Jy ! Component: 1050 - total flux cleaned = -0.0108381 Jy ! Component: 1100 - total flux cleaned = -0.0110682 Jy ! Component: 1150 - total flux cleaned = -0.011068 Jy ! Component: 1200 - total flux cleaned = -0.0106421 Jy ! Component: 1250 - total flux cleaned = -0.0108579 Jy ! Component: 1300 - total flux cleaned = -0.0112673 Jy ! Component: 1350 - total flux cleaned = -0.0116652 Jy ! Component: 1400 - total flux cleaned = -0.0118577 Jy ! Component: 1450 - total flux cleaned = -0.0122375 Jy ! Component: 1500 - total flux cleaned = -0.0127906 Jy ! Component: 1550 - total flux cleaned = -0.0122451 Jy ! Component: 1600 - total flux cleaned = -0.0122479 Jy ! Component: 1650 - total flux cleaned = -0.0122494 Jy ! Component: 1700 - total flux cleaned = -0.0125951 Jy ! Component: 1750 - total flux cleaned = -0.0124312 Jy ! Component: 1800 - total flux cleaned = -0.0129257 Jy ! Component: 1850 - total flux cleaned = -0.0130865 Jy ! Component: 1900 - total flux cleaned = -0.012927 Jy ! Component: 1950 - total flux cleaned = -0.0130844 Jy ! Component: 2000 - total flux cleaned = -0.0130871 Jy ! Component: 2050 - total flux cleaned = -0.0132366 Jy ! Component: 2100 - total flux cleaned = -0.0129379 Jy ! Component: 2150 - total flux cleaned = -0.012791 Jy ! Component: 2200 - total flux cleaned = -0.0126489 Jy ! Component: 2250 - total flux cleaned = -0.012226 Jy ! Component: 2300 - total flux cleaned = -0.0125046 Jy ! Component: 2350 - total flux cleaned = -0.0122276 Jy ! Component: 2400 - total flux cleaned = -0.0122239 Jy ! Component: 2450 - total flux cleaned = -0.0119584 Jy ! Component: 2500 - total flux cleaned = -0.0115675 Jy ! Component: 2550 - total flux cleaned = -0.0114402 Jy ! Component: 2600 - total flux cleaned = -0.0115682 Jy ! Component: 2650 - total flux cleaned = -0.0110679 Jy ! Component: 2700 - total flux cleaned = -0.0110686 Jy ! Component: 2750 - total flux cleaned = -0.0105808 Jy ! Component: 2800 - total flux cleaned = -0.0102188 Jy ! Component: 2850 - total flux cleaned = -0.00938281 Jy ! Component: 2900 - total flux cleaned = -0.00855696 Jy ! Component: 2950 - total flux cleaned = -0.00785603 Jy ! Component: 3000 - total flux cleaned = -0.00727636 Jy ! Component: 3050 - total flux cleaned = -0.00647249 Jy ! Component: 3100 - total flux cleaned = -0.00590392 Jy ! Component: 3150 - total flux cleaned = -0.00500212 Jy ! Component: 3200 - total flux cleaned = -0.00422191 Jy ! Component: 3250 - total flux cleaned = -0.00377806 Jy ! Component: 3300 - total flux cleaned = -0.00290166 Jy ! Component: 3350 - total flux cleaned = -0.00235847 Jy ! Component: 3400 - total flux cleaned = -0.00149638 Jy ! Component: 3450 - total flux cleaned = -0.00117486 Jy ! Component: 3500 - total flux cleaned = -0.000432584 Jy ! Component: 3550 - total flux cleaned = 9.37706e-05 Jy ! Component: 3600 - total flux cleaned = 0.00103429 Jy ! Component: 3650 - total flux cleaned = 0.00176008 Jy ! Component: 3700 - total flux cleaned = 0.00248046 Jy ! Component: 3750 - total flux cleaned = 0.00288958 Jy ! Component: 3800 - total flux cleaned = 0.00339828 Jy ! Component: 3850 - total flux cleaned = 0.0040049 Jy ! Component: 3900 - total flux cleaned = 0.00460759 Jy ! Component: 3950 - total flux cleaned = 0.00500696 Jy ! Component: 4000 - total flux cleaned = 0.00570172 Jy ! Component: 4050 - total flux cleaned = 0.0062932 Jy ! Total flux subtracted in 4096 components = 0.00658717 Jy ! Clean residual min=-0.005101 max=0.006577 Jy/beam ! Clean residual mean=0.000014 rms=0.001891 Jy/beam ! Combined flux in latest and established models = 2.28118 Jy keep ! Adding 329 model components to the UV plane model. ! The established model now contains 501 components and 2.28118 Jy ![Exited script file: muppet] wmap "J0024-4202_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.808 x 8.921 at 2.544 degrees (North through East) ! Clean map min=-0.026954 max=1.0055 Jy/beam ! Writing clean map to FITS file: J0024-4202_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 1.00548 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00183466 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.547399 0.547399 1.0948 2.1896 4.37919 8.75839 17.5168 35.0335 70.0671 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0055 print "peak=",int(1000*peak_flux)/1000 ! peak= 1.005 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.808 x 8.921 at 2.544 degrees (North through East) ! Clean map min=-0.026954 max=1.0055 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0024-4202_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:42:56 2019