! Started logfile: J0022+0608_S_2017_08_12_pus_uvs.log on Fri May 10 14:48:53 2019 obs J0022+0608_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0022+0608_S_2017_08_12_pus_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.417778 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0022+0608 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 3384 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0022+0608_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 215 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 405 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.664729Jy sigma=0.005982 ! Fit after self-cal, rms=0.657849Jy sigma=0.005926 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.762 mas, bmaj=6.683 mas, bpa=-3.357 degrees ! Estimated noise=1788.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.267958 Jy ! Component: 100 - total flux cleaned = 0.327317 Jy ! Total flux subtracted in 100 components = 0.327317 Jy ! Clean residual min=-0.009227 max=0.019605 Jy/beam ! Clean residual mean=-0.000016 rms=0.002509 Jy/beam ! Combined flux in latest and established models = 0.327317 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.327317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089117Jy sigma=0.000736 ! Fit after self-cal, rms=0.089118Jy sigma=0.000736 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204221 Jy ! Component: 100 - total flux cleaned = 0.030718 Jy ! Total flux subtracted in 100 components = 0.030718 Jy ! Clean residual min=-0.006917 max=0.006897 Jy/beam ! Clean residual mean=-0.000010 rms=0.001770 Jy/beam ! Combined flux in latest and established models = 0.358035 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.358035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084172Jy sigma=0.000695 ! Fit after self-cal, rms=0.084162Jy sigma=0.000695 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.185 mas, bmaj=7.067 mas, bpa=-1.635 degrees ! Estimated noise=1585.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00561744 Jy ! Component: 100 - total flux cleaned = 0.00870821 Jy ! Component: 150 - total flux cleaned = 0.00993729 Jy ! Component: 200 - total flux cleaned = 0.0100637 Jy ! Total flux subtracted in 200 components = 0.0100637 Jy ! Clean residual min=-0.005914 max=0.005170 Jy/beam ! Clean residual mean=-0.000018 rms=0.001378 Jy/beam ! Combined flux in latest and established models = 0.368099 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 43 components and 0.368099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083662Jy sigma=0.000692 ! Fit after self-cal, rms=0.083663Jy sigma=0.000692 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.94 KP 1.07 ! LA 1.02 MK 1.01 NL 0.90 OV 1.03 ! PT 1.02 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.01 KP 1.03 ! LA 0.98 MK 0.99 NL 1.06 OV 1.05 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.84 FD 1.00* HN 0.98 KP 0.99 ! LA 1.00 MK 1.00 NL 1.00 OV 0.97 ! PT 1.00 SC 1.03 ! ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.083663Jy sigma=0.000692 ! Fit after self-cal, rms=0.077328Jy sigma=0.000655 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=7.075 mas, bpa=-0.9515 degrees ! Estimated noise=1588.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.0348e-05 Jy ! Component: 100 - total flux cleaned = 6.10691e-05 Jy ! Component: 150 - total flux cleaned = 0.0003182 Jy ! Component: 200 - total flux cleaned = 0.000503539 Jy ! Total flux subtracted in 200 components = 0.000503539 Jy ! Clean residual min=-0.004242 max=0.004007 Jy/beam ! Clean residual mean=-0.000016 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.368602 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 53 components and 0.368602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077260Jy sigma=0.000654 ! Fit after self-cal, rms=0.077254Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077254Jy sigma=0.000654 ! Fit after self-cal, rms=0.076760Jy sigma=0.000645 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.226 mas, bmaj=7.075 mas, bpa=-0.8675 degrees ! Estimated noise=1588.94 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000553266 Jy ! Component: 100 - total flux cleaned = -0.000503125 Jy ! Component: 150 - total flux cleaned = -0.000437386 Jy ! Component: 200 - total flux cleaned = -0.000416734 Jy ! Total flux subtracted in 200 components = -0.000416734 Jy ! Clean residual min=-0.003820 max=0.004027 Jy/beam ! Clean residual mean=-0.000008 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.368186 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 61 components and 0.368186 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076743Jy sigma=0.000645 ! Fit after self-cal, rms=0.076756Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-127.5, 74.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322552 Jy ! Component: 100 - total flux cleaned = 0.00434953 Jy ! Component: 150 - total flux cleaned = 0.00469464 Jy ! Component: 200 - total flux cleaned = 0.00483974 Jy ! Total flux subtracted in 200 components = 0.00483974 Jy ! Clean residual min=-0.003708 max=0.003243 Jy/beam ! Clean residual mean=0.000002 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.373025 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.373025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076606Jy sigma=0.000644 ! Fit after self-cal, rms=0.076593Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076593Jy sigma=0.000644 ! Fit after self-cal, rms=0.076604Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.227 mas, bmaj=7.078 mas, bpa=-0.8833 degrees ! Estimated noise=1588 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00101781 Jy ! Component: 100 - total flux cleaned = 0.00105126 Jy ! Component: 150 - total flux cleaned = 0.00108158 Jy ! Component: 200 - total flux cleaned = 0.00110846 Jy ! Total flux subtracted in 200 components = 0.00110846 Jy ! Clean residual min=-0.003700 max=0.003211 Jy/beam ! Clean residual mean=0.000004 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.374134 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 88 components and 0.374134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076571Jy sigma=0.000644 ! Fit after self-cal, rms=0.076571Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000120175 Jy ! Component: 100 - total flux cleaned = 0.000146231 Jy ! Component: 150 - total flux cleaned = 0.000122574 Jy ! Component: 200 - total flux cleaned = 0.000100109 Jy ! Total flux subtracted in 200 components = 0.000100109 Jy ! Clean residual min=-0.003669 max=0.003170 Jy/beam ! Clean residual mean=0.000004 rms=0.000807 Jy/beam ! Combined flux in latest and established models = 0.374234 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 92 components and 0.374234 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076555Jy sigma=0.000643 ! Fit after self-cal, rms=0.076554Jy sigma=0.000643 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076554Jy sigma=0.000643 ! Fit after self-cal, rms=0.076522Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.129 mas, bmaj=11.22 mas, bpa=1.438 degrees ! Estimated noise=2031.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000241629 Jy ! Component: 100 - total flux cleaned = 0.00010479 Jy ! Component: 150 - total flux cleaned = -4.93768e-05 Jy ! Component: 200 - total flux cleaned = -0.000158395 Jy ! Total flux subtracted in 200 components = -0.000158395 Jy ! Clean residual min=-0.003494 max=0.003059 Jy/beam ! Clean residual mean=0.000008 rms=0.000967 Jy/beam ! Combined flux in latest and established models = 0.374076 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 99 components and 0.374076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076517Jy sigma=0.000643 ! Fit after self-cal, rms=0.076515Jy sigma=0.000643 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.37823e-05 Jy ! Component: 100 - total flux cleaned = -0.00013134 Jy ! Component: 150 - total flux cleaned = -0.00014609 Jy ! Component: 200 - total flux cleaned = -0.000160817 Jy ! Total flux subtracted in 200 components = -0.000160817 Jy ! Clean residual min=-0.003484 max=0.003013 Jy/beam ! Clean residual mean=0.000008 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.373915 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 100 components and 0.373915 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076514Jy sigma=0.000643 ! Fit after self-cal, rms=0.076513Jy sigma=0.000643 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=7.08 mas, bpa=-0.8903 degrees ! Estimated noise=1587.14 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.228 x 7.08 at -0.8903 degrees (North through East) ! Clean map min=-0.0034179 max=0.34406 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.812 mas, bmaj=6.685 mas, bpa=-2.319 degrees ! Estimated noise=1773.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.267251 Jy ! Component: 100 - total flux cleaned = 0.325869 Jy ! Component: 150 - total flux cleaned = 0.344316 Jy ! Component: 200 - total flux cleaned = 0.353487 Jy ! Total flux subtracted in 200 components = 0.353487 Jy ! Clean residual min=-0.004430 max=0.004468 Jy/beam ! Clean residual mean=-0.000006 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.353487 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.353487 Jy ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=7.08 mas, bpa=-0.8903 degrees ! Estimated noise=1587.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00640154 Jy ! Component: 100 - total flux cleaned = 0.0104471 Jy ! Component: 150 - total flux cleaned = 0.0132329 Jy ! Component: 200 - total flux cleaned = 0.0152502 Jy ! Total flux subtracted in 200 components = 0.0152502 Jy ! Clean residual min=-0.003751 max=0.003344 Jy/beam ! Clean residual mean=-0.000000 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.368737 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 49 components and 0.368737 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.129 mas, bmaj=11.22 mas, bpa=1.438 degrees ! Estimated noise=2031.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00218964 Jy ! Component: 100 - total flux cleaned = 0.00280774 Jy ! Component: 150 - total flux cleaned = 0.00327282 Jy ! Component: 200 - total flux cleaned = 0.00360159 Jy ! Total flux subtracted in 200 components = 0.00360159 Jy ! Clean residual min=-0.003695 max=0.002965 Jy/beam ! Clean residual mean=0.000005 rms=0.000973 Jy/beam ! Combined flux in latest and established models = 0.372339 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221725 Jy ! Component: 100 - total flux cleaned = 0.000344872 Jy ! Component: 150 - total flux cleaned = 0.000455155 Jy ! Component: 200 - total flux cleaned = 0.000574152 Jy ! Total flux subtracted in 200 components = 0.000574152 Jy ! Clean residual min=-0.003574 max=0.002954 Jy/beam ! Clean residual mean=0.000006 rms=0.000966 Jy/beam ! Combined flux in latest and established models = 0.372913 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 83 components and 0.372913 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.228 mas, bmaj=7.08 mas, bpa=-0.8903 degrees ! Estimated noise=1587.14 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000202292 Jy ! Component: 100 - total flux cleaned = 0.000323374 Jy ! Component: 150 - total flux cleaned = 0.000467575 Jy ! Component: 200 - total flux cleaned = 0.000565868 Jy ! Total flux subtracted in 200 components = 0.000565868 Jy ! Clean residual min=-0.003484 max=0.003283 Jy/beam ! Clean residual mean=0.000004 rms=0.000806 Jy/beam ! Combined flux in latest and established models = 0.373479 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 102 components and 0.373479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076524Jy sigma=0.000644 ! Fit after self-cal, rms=0.076521Jy sigma=0.000643 wmodel J0022+0608_S_2017_08_12_pus_map.mod ! Writing 102 model components to file: J0022+0608_S_2017_08_12_pus_map.mod wobs J0022+0608_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0022+0608_S_2017_08_12_pus_uvs.fits wwins J0022+0608_S_2017_08_12_pus_map.win ! wwins: Wrote 2 windows to J0022+0608_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000380541 Jy ! Component: 100 - total flux cleaned = -0.000435416 Jy ! Component: 150 - total flux cleaned = -0.000383765 Jy ! Component: 200 - total flux cleaned = -0.000536104 Jy ! Component: 250 - total flux cleaned = -0.00068297 Jy ! Component: 300 - total flux cleaned = -0.000588231 Jy ! Component: 350 - total flux cleaned = -0.00058821 Jy ! Component: 400 - total flux cleaned = -0.000587927 Jy ! Component: 450 - total flux cleaned = -0.00041427 Jy ! Component: 500 - total flux cleaned = -0.000244866 Jy ! Component: 550 - total flux cleaned = -0.000160986 Jy ! Component: 600 - total flux cleaned = 1.59792e-06 Jy ! Component: 650 - total flux cleaned = 8.16001e-05 Jy ! Component: 700 - total flux cleaned = 0.000199202 Jy ! Component: 750 - total flux cleaned = 0.000429361 Jy ! Component: 800 - total flux cleaned = 0.00069121 Jy ! Component: 850 - total flux cleaned = 0.000874708 Jy ! Component: 900 - total flux cleaned = 0.000911036 Jy ! Component: 950 - total flux cleaned = 0.00119692 Jy ! Component: 1000 - total flux cleaned = 0.00137107 Jy ! Component: 1050 - total flux cleaned = 0.00154338 Jy ! Component: 1100 - total flux cleaned = 0.00171297 Jy ! Component: 1150 - total flux cleaned = 0.00187955 Jy ! Component: 1200 - total flux cleaned = 0.00191321 Jy ! Component: 1250 - total flux cleaned = 0.00217303 Jy ! Component: 1300 - total flux cleaned = 0.00236452 Jy ! Component: 1350 - total flux cleaned = 0.00255365 Jy ! Component: 1400 - total flux cleaned = 0.00270885 Jy ! Component: 1450 - total flux cleaned = 0.00292286 Jy ! Component: 1500 - total flux cleaned = 0.00289234 Jy ! Component: 1550 - total flux cleaned = 0.00304296 Jy ! Component: 1600 - total flux cleaned = 0.00324978 Jy ! Component: 1650 - total flux cleaned = 0.00330805 Jy ! Component: 1700 - total flux cleaned = 0.00333683 Jy ! Component: 1750 - total flux cleaned = 0.00342256 Jy ! Component: 1800 - total flux cleaned = 0.00342218 Jy ! Component: 1850 - total flux cleaned = 0.0033941 Jy ! Component: 1900 - total flux cleaned = 0.00336678 Jy ! Component: 1950 - total flux cleaned = 0.00355716 Jy ! Component: 2000 - total flux cleaned = 0.00347636 Jy ! Component: 2050 - total flux cleaned = 0.00352938 Jy ! Component: 2100 - total flux cleaned = 0.00352933 Jy ! Component: 2150 - total flux cleaned = 0.00358139 Jy ! Component: 2200 - total flux cleaned = 0.00358096 Jy ! Component: 2250 - total flux cleaned = 0.00355559 Jy ! Component: 2300 - total flux cleaned = 0.00360602 Jy ! Component: 2350 - total flux cleaned = 0.0037315 Jy ! Component: 2400 - total flux cleaned = 0.0036076 Jy ! Component: 2450 - total flux cleaned = 0.00375479 Jy ! Component: 2500 - total flux cleaned = 0.00373034 Jy ! Component: 2550 - total flux cleaned = 0.00377859 Jy ! Component: 2600 - total flux cleaned = 0.0036112 Jy ! Component: 2650 - total flux cleaned = 0.00377775 Jy ! Component: 2700 - total flux cleaned = 0.00384818 Jy ! Component: 2750 - total flux cleaned = 0.00391787 Jy ! Component: 2800 - total flux cleaned = 0.00387141 Jy ! Component: 2850 - total flux cleaned = 0.00403196 Jy ! Component: 2900 - total flux cleaned = 0.00400873 Jy ! Component: 2950 - total flux cleaned = 0.00407668 Jy ! Component: 3000 - total flux cleaned = 0.00414386 Jy ! Component: 3050 - total flux cleaned = 0.00416594 Jy ! Component: 3100 - total flux cleaned = 0.0042766 Jy ! Component: 3150 - total flux cleaned = 0.00438613 Jy ! Component: 3200 - total flux cleaned = 0.00445123 Jy ! Component: 3250 - total flux cleaned = 0.00451581 Jy ! Component: 3300 - total flux cleaned = 0.0046225 Jy ! Component: 3350 - total flux cleaned = 0.00472853 Jy ! Component: 3400 - total flux cleaned = 0.00479173 Jy ! Component: 3450 - total flux cleaned = 0.004938 Jy ! Component: 3500 - total flux cleaned = 0.0050001 Jy ! Component: 3550 - total flux cleaned = 0.00502067 Jy ! Component: 3600 - total flux cleaned = 0.00516347 Jy ! Component: 3650 - total flux cleaned = 0.005204 Jy ! Component: 3700 - total flux cleaned = 0.00530463 Jy ! Component: 3750 - total flux cleaned = 0.00536465 Jy ! Component: 3800 - total flux cleaned = 0.00542417 Jy ! Component: 3850 - total flux cleaned = 0.00558208 Jy ! Component: 3900 - total flux cleaned = 0.00562127 Jy ! Component: 3950 - total flux cleaned = 0.00573806 Jy ! Component: 4000 - total flux cleaned = 0.00581565 Jy ! Component: 4050 - total flux cleaned = 0.00585418 Jy ! Total flux subtracted in 4096 components = 0.00596867 Jy ! Clean residual min=-0.001448 max=0.001176 Jy/beam ! Clean residual mean=0.000002 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.379447 Jy keep ! Adding 303 model components to the UV plane model. ! The established model now contains 405 components and 0.379447 Jy ![Exited script file: muppet] wmap "J0022+0608_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.228 x 7.08 at -0.8903 degrees (North through East) ! Clean map min=-0.0022026 max=0.34407 Jy/beam ! Writing clean map to FITS file: J0022+0608_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.344073 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000343333 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.299355 0.299355 0.598709 1.19742 2.39484 4.78967 9.57935 19.1587 38.3174 76.6348 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.344 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.228 x 7.08 at -0.8903 degrees (North through East) ! Clean map min=-0.0022026 max=0.34407 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0022+0608_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:48:57 2019