! Started logfile: J0019-2205_S_2017_10_21_pus_uvs.log on Sat May 11 20:47:13 2019 obs J0019-2205_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0019-2205_S_2017_10_21_pus_uva.fits ! AN table 1: 73 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.273592 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0019-2205 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 2876 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0019-2205_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 295 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 657 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.905724Jy sigma=0.007780 ! Fit after self-cal, rms=0.864258Jy sigma=0.007527 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.553 mas, bmaj=30.04 mas, bpa=6.394 degrees ! Estimated noise=2049.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10933 Jy ! Component: 100 - total flux cleaned = 0.137417 Jy ! Total flux subtracted in 100 components = 0.137417 Jy ! Clean residual min=-0.008270 max=0.010873 Jy/beam ! Clean residual mean=0.000044 rms=0.003439 Jy/beam ! Combined flux in latest and established models = 0.137417 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.137417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083712Jy sigma=0.000661 ! Fit after self-cal, rms=0.083726Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.405 mas, bmaj=31 mas, bpa=7.107 degrees ! Estimated noise=1784.91 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00769457 Jy ! Component: 100 - total flux cleaned = 0.0108312 Jy ! Component: 150 - total flux cleaned = 0.0136719 Jy ! Component: 200 - total flux cleaned = 0.0149062 Jy ! Total flux subtracted in 200 components = 0.0149062 Jy ! Clean residual min=-0.002463 max=0.002455 Jy/beam ! Clean residual mean=0.000002 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.152323 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 70 components and 0.152323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081761Jy sigma=0.000650 ! Fit after self-cal, rms=0.081643Jy sigma=0.000649 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.00* KP 1.06 ! LA 1.06 MK 1.00* NL 0.81 OV 1.03 ! PT 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 1.02 ! LA 1.03 MK 1.00* NL 1.04 OV 1.02 ! PT 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.00* KP 0.94 ! LA 0.81 MK 1.00* NL 1.19 OV 0.95 ! PT 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.081643Jy sigma=0.000649 ! Fit after self-cal, rms=0.075943Jy sigma=0.000635 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.427 mas, bmaj=31.12 mas, bpa=7.291 degrees ! Estimated noise=1771.86 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000851947 Jy ! Component: 100 - total flux cleaned = 0.000982409 Jy ! Component: 150 - total flux cleaned = 0.0013719 Jy ! Component: 200 - total flux cleaned = 0.00176216 Jy ! Total flux subtracted in 200 components = 0.00176216 Jy ! Clean residual min=-0.000938 max=0.000933 Jy/beam ! Clean residual mean=0.000000 rms=0.000298 Jy/beam ! Combined flux in latest and established models = 0.154085 Jy ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 144 components and 0.154085 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075856Jy sigma=0.000634 ! Fit after self-cal, rms=0.075780Jy sigma=0.000634 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075780Jy sigma=0.000634 ! Fit after self-cal, rms=0.075621Jy sigma=0.000634 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.424 mas, bmaj=31.11 mas, bpa=7.28 degrees ! Estimated noise=1769.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000313433 Jy ! Component: 100 - total flux cleaned = 0.000311434 Jy ! Component: 150 - total flux cleaned = 0.000352393 Jy ! Component: 200 - total flux cleaned = 0.000349991 Jy ! Total flux subtracted in 200 components = 0.000349991 Jy ! Clean residual min=-0.000817 max=0.000798 Jy/beam ! Clean residual mean=-0.000000 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.154435 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 178 components and 0.154435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075584Jy sigma=0.000634 ! Fit after self-cal, rms=0.075577Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000322956 Jy ! Component: 100 - total flux cleaned = 0.000420447 Jy ! Component: 150 - total flux cleaned = 0.00055364 Jy ! Component: 200 - total flux cleaned = 0.000589623 Jy ! Total flux subtracted in 200 components = 0.000589623 Jy ! Clean residual min=-0.000587 max=0.000592 Jy/beam ! Clean residual mean=0.000001 rms=0.000196 Jy/beam ! Combined flux in latest and established models = 0.155025 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 225 components and 0.155025 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075554Jy sigma=0.000633 ! Fit after self-cal, rms=0.075549Jy sigma=0.000633 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075549Jy sigma=0.000633 ! Fit after self-cal, rms=0.075518Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.422 mas, bmaj=31.1 mas, bpa=7.269 degrees ! Estimated noise=1769.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.78289e-05 Jy ! Component: 100 - total flux cleaned = 9.62436e-05 Jy ! Component: 150 - total flux cleaned = 6.36012e-05 Jy ! Component: 200 - total flux cleaned = 6.15347e-05 Jy ! Total flux subtracted in 200 components = 6.15347e-05 Jy ! Clean residual min=-0.000558 max=0.000535 Jy/beam ! Clean residual mean=0.000001 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.155087 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 244 components and 0.155087 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075499Jy sigma=0.000633 ! Fit after self-cal, rms=0.075499Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221231 Jy ! Component: 100 - total flux cleaned = 0.000245082 Jy ! Component: 150 - total flux cleaned = 0.000149672 Jy ! Component: 200 - total flux cleaned = 0.000149276 Jy ! Total flux subtracted in 200 components = 0.000149276 Jy ! Clean residual min=-0.000421 max=0.000408 Jy/beam ! Clean residual mean=0.000002 rms=0.000139 Jy/beam ! Combined flux in latest and established models = 0.155236 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 289 components and 0.155236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075487Jy sigma=0.000633 ! Fit after self-cal, rms=0.075489Jy sigma=0.000633 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075489Jy sigma=0.000633 ! Fit after self-cal, rms=0.075459Jy sigma=0.000633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.23 mas, bmaj=31.02 mas, bpa=7.308 degrees ! Estimated noise=1785.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.63542e-05 Jy ! Component: 100 - total flux cleaned = -9.29754e-06 Jy ! Component: 150 - total flux cleaned = -3.36494e-05 Jy ! Component: 200 - total flux cleaned = -3.57131e-05 Jy ! Total flux subtracted in 200 components = -3.57131e-05 Jy ! Clean residual min=-0.000407 max=0.000392 Jy/beam ! Clean residual mean=0.000001 rms=0.000120 Jy/beam ! Combined flux in latest and established models = 0.1552 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 314 components and 0.1552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075450Jy sigma=0.000633 ! Fit after self-cal, rms=0.075447Jy sigma=0.000633 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160289 Jy ! Component: 100 - total flux cleaned = 0.000240604 Jy ! Component: 150 - total flux cleaned = 0.000134706 Jy ! Component: 200 - total flux cleaned = 4.64033e-05 Jy ! Total flux subtracted in 200 components = 4.64033e-05 Jy ! Clean residual min=-0.000396 max=0.000394 Jy/beam ! Clean residual mean=0.000001 rms=0.000129 Jy/beam ! Combined flux in latest and established models = 0.155247 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 360 components and 0.155247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075439Jy sigma=0.000633 ! Fit after self-cal, rms=0.075437Jy sigma=0.000633 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=9.419 mas, bmaj=31.1 mas, bpa=7.253 degrees ! Estimated noise=1769.49 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.419 x 31.1 at 7.253 degrees (North through East) ! Clean map min=-0.0031414 max=0.11922 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.581 mas, bmaj=30.05 mas, bpa=6.261 degrees ! Estimated noise=1996.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106088 Jy ! Component: 100 - total flux cleaned = 0.133142 Jy ! Component: 150 - total flux cleaned = 0.141955 Jy ! Component: 200 - total flux cleaned = 0.144797 Jy ! Total flux subtracted in 200 components = 0.144797 Jy ! Clean residual min=-0.002948 max=0.002961 Jy/beam ! Clean residual mean=0.000010 rms=0.001294 Jy/beam ! Combined flux in latest and established models = 0.144797 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 45 model components to the UV plane model. ! The established model now contains 45 components and 0.144797 Jy ! Inverting map and beam ! Estimated beam: bmin=9.419 mas, bmaj=31.1 mas, bpa=7.253 degrees ! Estimated noise=1769.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000346322 Jy ! Component: 100 - total flux cleaned = -0.000461152 Jy ! Component: 150 - total flux cleaned = -0.000717973 Jy ! Component: 200 - total flux cleaned = -0.00098023 Jy ! Total flux subtracted in 200 components = -0.00098023 Jy ! Clean residual min=-0.002323 max=0.002286 Jy/beam ! Clean residual mean=-0.000002 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.143816 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 89 components and 0.143816 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.23 mas, bmaj=31.02 mas, bpa=7.308 degrees ! Estimated noise=1785.92 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000382528 Jy ! Component: 100 - total flux cleaned = 0.000954644 Jy ! Component: 150 - total flux cleaned = 0.00223293 Jy ! Component: 200 - total flux cleaned = 0.00321377 Jy ! Total flux subtracted in 200 components = 0.00321377 Jy ! Clean residual min=-0.001045 max=0.001053 Jy/beam ! Clean residual mean=0.000007 rms=0.000339 Jy/beam ! Combined flux in latest and established models = 0.14703 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000557459 Jy ! Component: 100 - total flux cleaned = 0.00055641 Jy ! Component: 150 - total flux cleaned = 0.000618602 Jy ! Component: 200 - total flux cleaned = 0.000688536 Jy ! Total flux subtracted in 200 components = 0.000688536 Jy ! Clean residual min=-0.001222 max=0.001286 Jy/beam ! Clean residual mean=0.000012 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.147719 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 179 components and 0.147719 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=9.419 mas, bmaj=31.1 mas, bpa=7.253 degrees ! Estimated noise=1769.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000499252 Jy ! Component: 100 - total flux cleaned = 0.00132315 Jy ! Component: 150 - total flux cleaned = 0.00164021 Jy ! Component: 200 - total flux cleaned = 0.00177657 Jy ! Total flux subtracted in 200 components = 0.00177657 Jy ! Clean residual min=-0.000445 max=0.000452 Jy/beam ! Clean residual mean=0.000002 rms=0.000163 Jy/beam ! Combined flux in latest and established models = 0.149495 Jy selfcal ! Performing phase self-cal ! Adding 74 model components to the UV plane model. ! The established model now contains 253 components and 0.149495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075465Jy sigma=0.000633 ! Fit after self-cal, rms=0.075461Jy sigma=0.000633 wmodel J0019-2205_S_2017_10_21_pus_map.mod ! Writing 253 model components to file: J0019-2205_S_2017_10_21_pus_map.mod wobs J0019-2205_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0019-2205_S_2017_10_21_pus_uvs.fits wwins J0019-2205_S_2017_10_21_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0019-2205_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.419 x 31.1 at 7.253 degrees (North through East) ! Clean map min=-0.0028613 max=0.12511 Jy/beam ! Writing clean map to FITS file: J0019-2205_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.125107 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000155231 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.372236 0.372236 0.744471 1.48894 2.97789 5.95577 11.9115 23.8231 47.6462 95.2923 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.125 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.419 x 31.1 at 7.253 degrees (North through East) ! Clean map min=-0.0028613 max=0.12511 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0019-2205_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:47:16 2019