! Started logfile: J0019-2205_S_2017_10_09_pus_uvs.log on Sun May 12 13:01:39 2019 obs J0019-2205_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0019-2205_S_2017_10_09_pus_uva.fits ! AN table 1: 144 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.579475 visibilities/baseline/integration-bin. ! Found source: J0019-2205 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 12016 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0019-2205_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 304 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 376 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 376 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1020 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.918589Jy sigma=0.006957 ! Fit after self-cal, rms=0.879960Jy sigma=0.006668 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.898 mas, bmaj=12.43 mas, bpa=-24.38 degrees ! Estimated noise=1724.35 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0932255 Jy ! Component: 100 - total flux cleaned = 0.117871 Jy ! Total flux subtracted in 100 components = 0.117871 Jy ! Clean residual min=-0.008663 max=0.012511 Jy/beam ! Clean residual mean=0.000015 rms=0.002802 Jy/beam ! Combined flux in latest and established models = 0.117871 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.117871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097581Jy sigma=0.000692 ! Fit after self-cal, rms=0.097496Jy sigma=0.000691 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=13.75 mas, bpa=-22.73 degrees ! Estimated noise=1017.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144944 Jy ! Component: 100 - total flux cleaned = 0.0227367 Jy ! Component: 150 - total flux cleaned = 0.0283706 Jy ! Component: 200 - total flux cleaned = 0.0324668 Jy ! Total flux subtracted in 200 components = 0.0324668 Jy ! Clean residual min=-0.005868 max=0.006771 Jy/beam ! Clean residual mean=0.000015 rms=0.001929 Jy/beam ! Combined flux in latest and established models = 0.150338 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 60 components and 0.150338 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094959Jy sigma=0.000674 ! Fit after self-cal, rms=0.094882Jy sigma=0.000674 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.94 HN 1.10 KP 1.07 ! LA 1.00 MK 0.96 NL 0.91 OV 1.00* ! PT 0.97 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.19 FD 0.98 HN 1.14 KP 1.01 ! LA 0.94 MK 0.96 NL 1.09 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.99 HN 1.09 KP 0.88 ! LA 0.76 MK 1.02 NL 1.15 OV 1.00* ! PT 0.93 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 0.91 KP 1.00* ! LA 1.00* MK 1.24 NL 1.00* OV 1.00* ! PT 1.07 ! ! ! Fit before self-cal, rms=0.094882Jy sigma=0.000674 ! Fit after self-cal, rms=0.092437Jy sigma=0.000664 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.809 mas, bmaj=13.94 mas, bpa=-23.15 degrees ! Estimated noise=1014.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00384976 Jy ! Component: 100 - total flux cleaned = -0.0042341 Jy ! Component: 150 - total flux cleaned = -0.00408086 Jy ! Component: 200 - total flux cleaned = -0.00408194 Jy ! Total flux subtracted in 200 components = -0.00408194 Jy ! Clean residual min=-0.005048 max=0.005992 Jy/beam ! Clean residual mean=0.000004 rms=0.001483 Jy/beam ! Combined flux in latest and established models = 0.146256 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 79 components and 0.146256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092192Jy sigma=0.000663 ! Fit after self-cal, rms=0.092167Jy sigma=0.000662 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092167Jy sigma=0.000662 ! Fit after self-cal, rms=0.092941Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.756 mas, bmaj=14.21 mas, bpa=-23.25 degrees ! Estimated noise=1016.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000422798 Jy ! Component: 100 - total flux cleaned = 0.000357514 Jy ! Component: 150 - total flux cleaned = 0.000302062 Jy ! Component: 200 - total flux cleaned = 0.000258267 Jy ! Total flux subtracted in 200 components = 0.000258267 Jy ! Clean residual min=-0.003446 max=0.002758 Jy/beam ! Clean residual mean=-0.000001 rms=0.000781 Jy/beam ! Combined flux in latest and established models = 0.146514 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 101 components and 0.146514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092858Jy sigma=0.000655 ! Fit after self-cal, rms=0.093005Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.06657e-05 Jy ! Component: 100 - total flux cleaned = -9.0813e-05 Jy ! Component: 150 - total flux cleaned = -0.000124377 Jy ! Component: 200 - total flux cleaned = -0.000151415 Jy ! Total flux subtracted in 200 components = -0.000151415 Jy ! Clean residual min=-0.003182 max=0.002720 Jy/beam ! Clean residual mean=-0.000000 rms=0.000766 Jy/beam ! Combined flux in latest and established models = 0.146363 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 110 components and 0.146363 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092980Jy sigma=0.000655 ! Fit after self-cal, rms=0.092973Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092973Jy sigma=0.000655 ! Fit after self-cal, rms=0.094269Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.753 mas, bmaj=14.33 mas, bpa=-23.3 degrees ! Estimated noise=1019.82 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000251114 Jy ! Component: 100 - total flux cleaned = -0.000292488 Jy ! Component: 150 - total flux cleaned = -0.000327778 Jy ! Component: 200 - total flux cleaned = -0.000360588 Jy ! Total flux subtracted in 200 components = -0.000360588 Jy ! Clean residual min=-0.003059 max=0.002585 Jy/beam ! Clean residual mean=-0.000000 rms=0.000706 Jy/beam ! Combined flux in latest and established models = 0.146002 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 120 components and 0.146002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094230Jy sigma=0.000655 ! Fit after self-cal, rms=0.094254Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.33189e-05 Jy ! Component: 100 - total flux cleaned = -9.09863e-05 Jy ! Component: 150 - total flux cleaned = -0.000138727 Jy ! Component: 200 - total flux cleaned = -0.000225318 Jy ! Total flux subtracted in 200 components = -0.000225318 Jy ! Clean residual min=-0.002990 max=0.002530 Jy/beam ! Clean residual mean=0.000000 rms=0.000697 Jy/beam ! Combined flux in latest and established models = 0.145777 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 125 components and 0.145777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094238Jy sigma=0.000654 ! Fit after self-cal, rms=0.094235Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094235Jy sigma=0.000654 ! Fit after self-cal, rms=0.094995Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.036 mas, bmaj=20.49 mas, bpa=-9.422 degrees ! Estimated noise=1161.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000189548 Jy ! Component: 100 - total flux cleaned = -0.000233918 Jy ! Component: 150 - total flux cleaned = -0.000287864 Jy ! Component: 200 - total flux cleaned = -0.000336641 Jy ! Total flux subtracted in 200 components = -0.000336641 Jy ! Clean residual min=-0.002773 max=0.002353 Jy/beam ! Clean residual mean=-0.000001 rms=0.000705 Jy/beam ! Combined flux in latest and established models = 0.14544 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 140 components and 0.14544 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094985Jy sigma=0.000654 ! Fit after self-cal, rms=0.094994Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.06289e-05 Jy ! Component: 100 - total flux cleaned = -4.00901e-05 Jy ! Component: 150 - total flux cleaned = -6.71001e-05 Jy ! Component: 200 - total flux cleaned = -0.000104448 Jy ! Total flux subtracted in 200 components = -0.000104448 Jy ! Clean residual min=-0.002768 max=0.002292 Jy/beam ! Clean residual mean=-0.000001 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.145336 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 152 components and 0.145336 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094990Jy sigma=0.000654 ! Fit after self-cal, rms=0.094988Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=14.43 mas, bpa=-23.34 degrees ! Estimated noise=1022.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.75 x 14.43 at -23.34 degrees (North through East) ! Clean map min=-0.0028697 max=0.11915 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.868 mas, bmaj=13.05 mas, bpa=-24.82 degrees ! Estimated noise=1747.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0939887 Jy ! Component: 100 - total flux cleaned = 0.116515 Jy ! Component: 150 - total flux cleaned = 0.12592 Jy ! Component: 200 - total flux cleaned = 0.131354 Jy ! Total flux subtracted in 200 components = 0.131354 Jy ! Clean residual min=-0.005390 max=0.004927 Jy/beam ! Clean residual mean=0.000003 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.131354 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.131354 Jy ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=14.43 mas, bpa=-23.34 degrees ! Estimated noise=1022.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00532564 Jy ! Component: 100 - total flux cleaned = 0.00817853 Jy ! Component: 150 - total flux cleaned = 0.0094018 Jy ! Component: 200 - total flux cleaned = 0.0101202 Jy ! Total flux subtracted in 200 components = 0.0101202 Jy ! Clean residual min=-0.002711 max=0.002451 Jy/beam ! Clean residual mean=0.000004 rms=0.000703 Jy/beam ! Combined flux in latest and established models = 0.141474 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 58 components and 0.141474 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.036 mas, bmaj=20.49 mas, bpa=-9.422 degrees ! Estimated noise=1161.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00133366 Jy ! Component: 100 - total flux cleaned = 0.00162613 Jy ! Component: 150 - total flux cleaned = 0.00180721 Jy ! Component: 200 - total flux cleaned = 0.00196797 Jy ! Total flux subtracted in 200 components = 0.00196797 Jy ! Clean residual min=-0.002960 max=0.002180 Jy/beam ! Clean residual mean=0.000004 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 0.143442 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000167929 Jy ! Component: 100 - total flux cleaned = 0.000276453 Jy ! Component: 150 - total flux cleaned = 0.000395766 Jy ! Component: 200 - total flux cleaned = 0.000504618 Jy ! Total flux subtracted in 200 components = 0.000504618 Jy ! Clean residual min=-0.002900 max=0.002197 Jy/beam ! Clean residual mean=0.000003 rms=0.000714 Jy/beam ! Combined flux in latest and established models = 0.143947 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 74 components and 0.143947 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.75 mas, bmaj=14.43 mas, bpa=-23.34 degrees ! Estimated noise=1022.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000225647 Jy ! Component: 100 - total flux cleaned = -0.000246822 Jy ! Component: 150 - total flux cleaned = -0.000247015 Jy ! Component: 200 - total flux cleaned = -0.000212474 Jy ! Total flux subtracted in 200 components = -0.000212474 Jy ! Clean residual min=-0.002843 max=0.002251 Jy/beam ! Clean residual mean=0.000002 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.143734 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 90 components and 0.143734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094958Jy sigma=0.000654 ! Fit after self-cal, rms=0.094920Jy sigma=0.000654 wmodel J0019-2205_S_2017_10_09_pus_map.mod ! Writing 90 model components to file: J0019-2205_S_2017_10_09_pus_map.mod wobs J0019-2205_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0019-2205_S_2017_10_09_pus_uvs.fits wwins J0019-2205_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0019-2205_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110191 Jy ! Component: 100 - total flux cleaned = -0.00159958 Jy ! Component: 150 - total flux cleaned = -0.00190857 Jy ! Component: 200 - total flux cleaned = -0.00227294 Jy ! Component: 250 - total flux cleaned = -0.00254613 Jy ! Component: 300 - total flux cleaned = -0.00274269 Jy ! Component: 350 - total flux cleaned = -0.00302648 Jy ! Component: 400 - total flux cleaned = -0.00330116 Jy ! Component: 450 - total flux cleaned = -0.00356604 Jy ! Component: 500 - total flux cleaned = -0.00376515 Jy ! Component: 550 - total flux cleaned = -0.00401302 Jy ! Component: 600 - total flux cleaned = -0.00422603 Jy ! Component: 650 - total flux cleaned = -0.00443214 Jy ! Component: 700 - total flux cleaned = -0.00458201 Jy ! Component: 750 - total flux cleaned = -0.00465538 Jy ! Component: 800 - total flux cleaned = -0.00472604 Jy ! Component: 850 - total flux cleaned = -0.00472595 Jy ! Component: 900 - total flux cleaned = -0.00472612 Jy ! Component: 950 - total flux cleaned = -0.00476926 Jy ! Component: 1000 - total flux cleaned = -0.0047054 Jy ! Component: 1050 - total flux cleaned = -0.00472595 Jy ! Component: 1100 - total flux cleaned = -0.00462469 Jy ! Component: 1150 - total flux cleaned = -0.00460514 Jy ! Component: 1200 - total flux cleaned = -0.00452807 Jy ! Component: 1250 - total flux cleaned = -0.00447131 Jy ! Component: 1300 - total flux cleaned = -0.00443386 Jy ! Component: 1350 - total flux cleaned = -0.00437912 Jy ! Component: 1400 - total flux cleaned = -0.00436114 Jy ! Component: 1450 - total flux cleaned = -0.00430858 Jy ! Component: 1500 - total flux cleaned = -0.0042744 Jy ! Component: 1550 - total flux cleaned = -0.00424091 Jy ! Component: 1600 - total flux cleaned = -0.00422426 Jy ! Component: 1650 - total flux cleaned = -0.00420779 Jy ! Component: 1700 - total flux cleaned = -0.00415973 Jy ! Component: 1750 - total flux cleaned = -0.00412831 Jy ! Component: 1800 - total flux cleaned = -0.00412868 Jy ! Component: 1850 - total flux cleaned = -0.00408277 Jy ! Component: 1900 - total flux cleaned = -0.00403742 Jy ! Component: 1950 - total flux cleaned = -0.00397832 Jy ! Component: 2000 - total flux cleaned = -0.0039346 Jy ! Component: 2050 - total flux cleaned = -0.00393473 Jy ! Component: 2100 - total flux cleaned = -0.00387758 Jy ! Component: 2150 - total flux cleaned = -0.00377916 Jy ! Component: 2200 - total flux cleaned = -0.00372364 Jy ! Component: 2250 - total flux cleaned = -0.00366887 Jy ! Component: 2300 - total flux cleaned = -0.00358748 Jy ! Component: 2350 - total flux cleaned = -0.00353387 Jy ! Component: 2400 - total flux cleaned = -0.00341463 Jy ! Component: 2450 - total flux cleaned = -0.00333603 Jy ! Component: 2500 - total flux cleaned = -0.00328425 Jy ! Component: 2550 - total flux cleaned = -0.00320737 Jy ! Component: 2600 - total flux cleaned = -0.00311855 Jy ! Component: 2650 - total flux cleaned = -0.00306839 Jy ! Component: 2700 - total flux cleaned = -0.00299378 Jy ! Component: 2750 - total flux cleaned = -0.00293195 Jy ! Component: 2800 - total flux cleaned = -0.00287076 Jy ! Component: 2850 - total flux cleaned = -0.00283433 Jy ! Component: 2900 - total flux cleaned = -0.00273799 Jy ! Component: 2950 - total flux cleaned = -0.00267833 Jy ! Component: 3000 - total flux cleaned = -0.00261919 Jy ! Component: 3050 - total flux cleaned = -0.00253708 Jy ! Component: 3100 - total flux cleaned = -0.00247896 Jy ! Component: 3150 - total flux cleaned = -0.00242133 Jy ! Component: 3200 - total flux cleaned = -0.00234123 Jy ! Component: 3250 - total flux cleaned = -0.00229593 Jy ! Component: 3300 - total flux cleaned = -0.00226214 Jy ! Component: 3350 - total flux cleaned = -0.00219487 Jy ! Component: 3400 - total flux cleaned = -0.00215042 Jy ! Component: 3450 - total flux cleaned = -0.00207303 Jy ! Component: 3500 - total flux cleaned = -0.00201813 Jy ! Component: 3550 - total flux cleaned = -0.00196356 Jy ! Component: 3600 - total flux cleaned = -0.00194184 Jy ! Component: 3650 - total flux cleaned = -0.00188776 Jy ! Component: 3700 - total flux cleaned = -0.00183394 Jy ! Component: 3750 - total flux cleaned = -0.00175907 Jy ! Component: 3800 - total flux cleaned = -0.00172717 Jy ! Component: 3850 - total flux cleaned = -0.00165315 Jy ! Component: 3900 - total flux cleaned = -0.00162161 Jy ! Component: 3950 - total flux cleaned = -0.00159033 Jy ! Component: 4000 - total flux cleaned = -0.00159033 Jy ! Component: 4050 - total flux cleaned = -0.00154872 Jy ! Total flux subtracted in 4096 components = -0.00150743 Jy ! Clean residual min=-0.000651 max=0.000608 Jy/beam ! Clean residual mean=0.000000 rms=0.000179 Jy/beam ! Combined flux in latest and established models = 0.142227 Jy keep ! Adding 262 model components to the UV plane model. ! The established model now contains 352 components and 0.142227 Jy ![Exited script file: muppet] wmap "J0019-2205_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.75 x 14.43 at -23.34 degrees (North through East) ! Clean map min=-0.0021756 max=0.11976 Jy/beam ! Writing clean map to FITS file: J0019-2205_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.119759 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000175937 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.440726 0.440726 0.881453 1.76291 3.52581 7.05162 14.1032 28.2065 56.413 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.119 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.75 x 14.43 at -23.34 degrees (North through East) ! Clean map min=-0.0021756 max=0.11976 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0019-2205_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:01:44 2019