! Started logfile: J0017-2748_X_2017_05_31_pus_uvs.log on Tue Feb  5 10:42:05 2019
obs J0017-2748_X_2017_05_31_pus_uva.fits
! Reading UV FITS file: J0017-2748_X_2017_05_31_pus_uva.fits
! AN table 1: 76 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.965205 visibilities/baseline/integration-bin.
! Found source: J0017-2748
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.44388e+09      3.2e+07          1      3.2e+07
!  02        2  8.47588e+09      3.2e+07          1      3.2e+07
!  03        3  8.50788e+09      3.2e+07          1      3.2e+07
!  04        4  8.53988e+09      3.2e+07          1      3.2e+07
!  05        5  8.60388e+09      3.2e+07          1      3.2e+07
!  06        6  8.63588e+09      3.2e+07          1      3.2e+07
!  07        7  8.69988e+09      3.2e+07          1      3.2e+07
!  08        8  8.73188e+09      3.2e+07          1      3.2e+07
!  09        9  8.79588e+09      3.2e+07          1      3.2e+07
!  10       10  8.82788e+09      3.2e+07          1      3.2e+07
!  11       11  8.85988e+09      3.2e+07          1      3.2e+07
!  12       12  8.89188e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 1698 lines of history.
! 
! Reading 39612 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@muppet J0017-2748_X_2017_05_31_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 15 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.863944Jy  sigma=0.006174
! Fit after  self-cal, rms=0.835384Jy  sigma=0.005956
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Estimated beam: bmin=0.6296 mas, bmaj=1.749 mas, bpa=-5.113 degrees
! Estimated noise=1159.89 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.121212 Jy
! Component: 100  -  total flux cleaned = 0.183932 Jy
! Total flux subtracted in 100 components = 0.183932 Jy
! Clean residual min=-0.017058 max=0.047396 Jy/beam
! Clean residual mean=-0.000151 rms=0.005252 Jy/beam
! Combined flux in latest and established models = 0.183932 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.183932 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.143204Jy  sigma=0.000998
! Fit after  self-cal, rms=0.139826Jy  sigma=0.000984
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Added new window around map position (0.6, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0534795 Jy
! Component: 100  -  total flux cleaned = 0.0815742 Jy
! Total flux subtracted in 100 components = 0.0815742 Jy
! Clean residual min=-0.009022 max=0.022978 Jy/beam
! Clean residual mean=-0.000047 rms=0.002647 Jy/beam
! Combined flux in latest and established models = 0.265506 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 23 components and 0.265506 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.113162Jy  sigma=0.000752
! Fit after  self-cal, rms=0.110508Jy  sigma=0.000735
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0233833 Jy
! Component: 100  -  total flux cleaned = 0.0356098 Jy
! Total flux subtracted in 100 components = 0.0356098 Jy
! Clean residual min=-0.007787 max=0.013854 Jy/beam
! Clean residual mean=-0.000002 rms=0.001987 Jy/beam
! Combined flux in latest and established models = 0.301116 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 27 components and 0.301116 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.105103Jy  sigma=0.000684
! Fit after  self-cal, rms=0.104972Jy  sigma=0.000683
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Added new window around map position (1.4, -2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0096743 Jy
! Component: 100  -  total flux cleaned = 0.0119773 Jy
! Total flux subtracted in 100 components = 0.0119773 Jy
! Clean residual min=-0.008303 max=0.011159 Jy/beam
! Clean residual mean=0.000009 rms=0.001716 Jy/beam
! Combined flux in latest and established models = 0.313094 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 33 components and 0.313094 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.103718Jy  sigma=0.000674
! Fit after  self-cal, rms=0.103611Jy  sigma=0.000672
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Estimated beam: bmin=0.7972 mas, bmaj=2.088 mas, bpa=-4.355 degrees
! Estimated noise=501.379 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.2, 1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00799769 Jy
! Component: 100  -  total flux cleaned = 0.00969641 Jy
! Component: 150  -  total flux cleaned = 0.00998466 Jy
! Component: 200  -  total flux cleaned = 0.0101145 Jy
! Total flux subtracted in 200 components = 0.0101145 Jy
! Clean residual min=-0.005998 max=0.007604 Jy/beam
! Clean residual mean=0.000040 rms=0.001327 Jy/beam
! Combined flux in latest and established models = 0.323208 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 46 components and 0.323208 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.102819Jy  sigma=0.000667
! Fit after  self-cal, rms=0.102782Jy  sigma=0.000666
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.98     HN        1.26     KP        1.00     
!   LA        0.98     MK        0.96     NL        1.01     OV        1.06     
!   PT        1.01     SC        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.98     HN        1.29     KP        0.92     
!   LA        0.97     MK        0.93     NL        1.02     OV        1.08     
!   PT        1.05     SC        0.88     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        1.29     KP        0.88     
!   LA        0.98     MK        0.96     NL        1.04     OV        1.06     
!   PT        1.04     SC        0.85     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.95     HN        1.28     KP        0.99     
!   LA        0.98     MK        0.96     NL        1.02     OV        1.06     
!   PT        1.06     SC        0.82     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.98     HN        1.23     KP        0.96     
!   LA        0.96     MK        0.98     NL        0.93     OV        1.07     
!   PT        1.04     SC        0.96     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.27     KP        0.97     
!   LA        0.96     MK        1.00     NL        0.93     OV        0.99     
!   PT        1.03     SC        0.89     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.99     HN        1.29     KP        0.96     
!   LA        1.00     MK        0.99     NL        0.93     OV        1.00     
!   PT        1.06     SC        1.24     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.03     HN        1.33     KP        0.97     
!   LA        0.97     MK        0.95     NL        0.93     OV        0.99     
!   PT        1.05     SC        0.87     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.29     KP        0.97     
!   LA        0.99     MK        0.98     NL        0.93     OV        0.99     
!   PT        1.06     SC        0.89     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.01     HN        1.27     KP        0.97     
!   LA        1.01     MK        0.96     NL        0.93     OV        1.00     
!   PT        1.07     SC        0.88     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        1.00     HN        1.22     KP        0.89     
!   LA        1.01     MK        1.01     NL        0.93     OV        1.01     
!   PT        1.07     SC        0.90     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.18     KP        0.94     
!   LA        1.00     MK        1.02     NL        0.95     OV        1.09     
!   PT        1.07     SC        0.84     
! 
! 
! Fit before self-cal, rms=0.102782Jy  sigma=0.000666
! Fit after  self-cal, rms=0.107625Jy  sigma=0.000654
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Estimated beam: bmin=0.7884 mas, bmaj=2.041 mas, bpa=-3.484 degrees
! Estimated noise=494.122 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.6, -0.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.001956 Jy
! Component: 100  -  total flux cleaned = 0.00259093 Jy
! Component: 150  -  total flux cleaned = 0.00285069 Jy
! Component: 200  -  total flux cleaned = 0.00285211 Jy
! Total flux subtracted in 200 components = 0.00285211 Jy
! Clean residual min=-0.002717 max=0.002740 Jy/beam
! Clean residual mean=-0.000007 rms=0.000715 Jy/beam
! Combined flux in latest and established models = 0.32606 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 63 components and 0.32606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107418Jy  sigma=0.000653
! Fit after  self-cal, rms=0.107561Jy  sigma=0.000652
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.107561Jy  sigma=0.000652
! Fit after  self-cal, rms=0.109317Jy  sigma=0.000651
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Estimated beam: bmin=0.7889 mas, bmaj=2.041 mas, bpa=-3.718 degrees
! Estimated noise=495.379 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000631747 Jy
! Component: 100  -  total flux cleaned = 0.000700682 Jy
! Component: 150  -  total flux cleaned = 0.000649426 Jy
! Component: 200  -  total flux cleaned = 0.000599622 Jy
! Total flux subtracted in 200 components = 0.000599622 Jy
! Clean residual min=-0.002306 max=0.002574 Jy/beam
! Clean residual mean=-0.000007 rms=0.000577 Jy/beam
! Combined flux in latest and established models = 0.32666 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 68 components and 0.32666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109241Jy  sigma=0.000650
! Fit after  self-cal, rms=0.109269Jy  sigma=0.000650
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.6, 2.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0014837 Jy
! Component: 100  -  total flux cleaned = 0.00158066 Jy
! Component: 150  -  total flux cleaned = 0.00148526 Jy
! Component: 200  -  total flux cleaned = 0.00144344 Jy
! Total flux subtracted in 200 components = 0.00144344 Jy
! Clean residual min=-0.002193 max=0.001987 Jy/beam
! Clean residual mean=-0.000006 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.328103 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 79 components and 0.328103 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109195Jy  sigma=0.000650
! Fit after  self-cal, rms=0.109188Jy  sigma=0.000650
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.109188Jy  sigma=0.000650
! Fit after  self-cal, rms=0.111426Jy  sigma=0.000647
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Estimated beam: bmin=0.7875 mas, bmaj=2.035 mas, bpa=-3.707 degrees
! Estimated noise=494.265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000298289 Jy
! Component: 100  -  total flux cleaned = 0.000338216 Jy
! Component: 150  -  total flux cleaned = 0.000336749 Jy
! Component: 200  -  total flux cleaned = 0.000336257 Jy
! Total flux subtracted in 200 components = 0.000336257 Jy
! Clean residual min=-0.001550 max=0.001252 Jy/beam
! Clean residual mean=-0.000003 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.32844 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 91 components and 0.32844 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111394Jy  sigma=0.000647
! Fit after  self-cal, rms=0.111435Jy  sigma=0.000647
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.47782e-05 Jy
! Component: 100  -  total flux cleaned = 8.35959e-05 Jy
! Component: 150  -  total flux cleaned = 8.37731e-05 Jy
! Component: 200  -  total flux cleaned = 8.32036e-05 Jy
! Total flux subtracted in 200 components = 8.32036e-05 Jy
! Clean residual min=-0.001503 max=0.001211 Jy/beam
! Clean residual mean=-0.000003 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.328523 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 100 components and 0.328523 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111418Jy  sigma=0.000647
! Fit after  self-cal, rms=0.111416Jy  sigma=0.000647
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111416Jy  sigma=0.000647
! Fit after  self-cal, rms=0.111722Jy  sigma=0.000647
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Estimated beam: bmin=2.249 mas, bmaj=5.623 mas, bpa=0.4383 degrees
! Estimated noise=644.828 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.24982e-05 Jy
! Component: 100  -  total flux cleaned = -8.60964e-05 Jy
! Component: 150  -  total flux cleaned = -0.000121571 Jy
! Component: 200  -  total flux cleaned = -0.000142716 Jy
! Total flux subtracted in 200 components = -0.000142716 Jy
! Clean residual min=-0.001047 max=0.001242 Jy/beam
! Clean residual mean=-0.000006 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.32838 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 108 components and 0.32838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111717Jy  sigma=0.000647
! Fit after  self-cal, rms=0.111724Jy  sigma=0.000647
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.78925e-06 Jy
! Component: 100  -  total flux cleaned = -2.20482e-05 Jy
! Component: 150  -  total flux cleaned = -4.05448e-05 Jy
! Component: 200  -  total flux cleaned = -5.78587e-05 Jy
! Total flux subtracted in 200 components = -5.78587e-05 Jy
! Clean residual min=-0.001046 max=0.001226 Jy/beam
! Clean residual mean=-0.000006 rms=0.000349 Jy/beam
! Combined flux in latest and established models = 0.328322 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 114 components and 0.328322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111723Jy  sigma=0.000647
! Fit after  self-cal, rms=0.111722Jy  sigma=0.000647
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Estimated beam: bmin=0.7866 mas, bmaj=2.032 mas, bpa=-3.706 degrees
! Estimated noise=493.558 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7866 x 2.032 at -3.706 degrees (North through East)
! Clean map  min=-0.0029459  max=0.16188 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Estimated beam: bmin=0.6246 mas, bmaj=1.704 mas, bpa=-4.263 degrees
! Estimated noise=1128.27 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.127631 Jy
! Component: 100  -  total flux cleaned = 0.19744 Jy
! Component: 150  -  total flux cleaned = 0.238587 Jy
! Component: 200  -  total flux cleaned = 0.264229 Jy
! Total flux subtracted in 200 components = 0.264229 Jy
! Clean residual min=-0.006123 max=0.014887 Jy/beam
! Clean residual mean=-0.000062 rms=0.002025 Jy/beam
! Combined flux in latest and established models = 0.264229 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.264229 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Estimated beam: bmin=0.7866 mas, bmaj=2.032 mas, bpa=-3.706 degrees
! Estimated noise=493.558 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0250941 Jy
! Component: 100  -  total flux cleaned = 0.0382754 Jy
! Component: 150  -  total flux cleaned = 0.0466426 Jy
! Component: 200  -  total flux cleaned = 0.0522152 Jy
! Total flux subtracted in 200 components = 0.0522152 Jy
! Clean residual min=-0.002545 max=0.006115 Jy/beam
! Clean residual mean=-0.000029 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.316444 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 54 components and 0.316444 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Added new window around map position (-0.8, 0.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00536122 Jy
! Component: 100  -  total flux cleaned = 0.00845534 Jy
! Component: 150  -  total flux cleaned = 0.010155 Jy
! Component: 200  -  total flux cleaned = 0.0108082 Jy
! Total flux subtracted in 200 components = 0.0108082 Jy
! Clean residual min=-0.001799 max=0.001894 Jy/beam
! Clean residual mean=-0.000003 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.327252 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 82 components and 0.327252 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Added new window around map position (-4, 18.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000864244 Jy
! Component: 100  -  total flux cleaned = 0.000921465 Jy
! Component: 150  -  total flux cleaned = 0.000975199 Jy
! Component: 200  -  total flux cleaned = 0.00107105 Jy
! Total flux subtracted in 200 components = 0.00107105 Jy
! Clean residual min=-0.001770 max=0.001369 Jy/beam
! Clean residual mean=-0.000002 rms=0.000369 Jy/beam
! Combined flux in latest and established models = 0.328323 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 96 components and 0.328323 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Estimated beam: bmin=2.249 mas, bmaj=5.623 mas, bpa=0.4383 degrees
! Estimated noise=644.828 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000628746 Jy
! Component: 100  -  total flux cleaned = 0.0006834 Jy
! Component: 150  -  total flux cleaned = 0.000661882 Jy
! Component: 200  -  total flux cleaned = 0.000581739 Jy
! Total flux subtracted in 200 components = 0.000581739 Jy
! Clean residual min=-0.001191 max=0.001282 Jy/beam
! Clean residual mean=-0.000004 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.328905 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.2162e-05 Jy
! Component: 100  -  total flux cleaned = -0.000178343 Jy
! Component: 150  -  total flux cleaned = -0.000259466 Jy
! Component: 200  -  total flux cleaned = -0.000335597 Jy
! Total flux subtracted in 200 components = -0.000335597 Jy
! Clean residual min=-0.001162 max=0.001246 Jy/beam
! Clean residual mean=-0.000005 rms=0.000362 Jy/beam
! Combined flux in latest and established models = 0.32857 Jy
! Adding 38 model components to the UV plane model.
! The established model now contains 133 components and 0.32857 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! Estimated beam: bmin=0.7866 mas, bmaj=2.032 mas, bpa=-3.706 degrees
! Estimated noise=493.558 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.0831e-05 Jy
! Component: 100  -  total flux cleaned = -0.000172759 Jy
! Component: 150  -  total flux cleaned = -0.00024789 Jy
! Component: 200  -  total flux cleaned = -0.000317811 Jy
! Total flux subtracted in 200 components = -0.000317811 Jy
! Clean residual min=-0.001473 max=0.001296 Jy/beam
! Clean residual mean=-0.000002 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.328252 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 145 components and 0.328252 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.111737Jy  sigma=0.000647
! Fit after  self-cal, rms=0.111723Jy  sigma=0.000647
wmodel J0017-2748_X_2017_05_31_pus_map.mod
! Writing 145 model components to file: J0017-2748_X_2017_05_31_pus_map.mod
wobs J0017-2748_X_2017_05_31_pus_uvs.fits
! Writing UV FITS file: J0017-2748_X_2017_05_31_pus_uvs.fits
wwins J0017-2748_X_2017_05_31_pus_map.win
! wwins: Wrote 8 windows to J0017-2748_X_2017_05_31_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00041385 Jy
! Component: 100  -  total flux cleaned = -0.0008518 Jy
! Component: 150  -  total flux cleaned = -0.00113651 Jy
! Component: 200  -  total flux cleaned = -0.00125294 Jy
! Component: 250  -  total flux cleaned = -0.0013266 Jy
! Component: 300  -  total flux cleaned = -0.0014161 Jy
! Component: 350  -  total flux cleaned = -0.00155591 Jy
! Component: 400  -  total flux cleaned = -0.00167568 Jy
! Component: 450  -  total flux cleaned = -0.00182624 Jy
! Component: 500  -  total flux cleaned = -0.00198986 Jy
! Component: 550  -  total flux cleaned = -0.00208619 Jy
! Component: 600  -  total flux cleaned = -0.00218126 Jy
! Component: 650  -  total flux cleaned = -0.00227468 Jy
! Component: 700  -  total flux cleaned = -0.00235138 Jy
! Component: 750  -  total flux cleaned = -0.0024712 Jy
! Component: 800  -  total flux cleaned = -0.00253028 Jy
! Component: 850  -  total flux cleaned = -0.00257409 Jy
! Component: 900  -  total flux cleaned = -0.00261736 Jy
! Component: 950  -  total flux cleaned = -0.00270201 Jy
! Component: 1000  -  total flux cleaned = -0.00271576 Jy
! Component: 1050  -  total flux cleaned = -0.00271599 Jy
! Component: 1100  -  total flux cleaned = -0.00278388 Jy
! Component: 1150  -  total flux cleaned = -0.00274361 Jy
! Component: 1200  -  total flux cleaned = -0.00278325 Jy
! Component: 1250  -  total flux cleaned = -0.00279634 Jy
! Component: 1300  -  total flux cleaned = -0.00280911 Jy
! Component: 1350  -  total flux cleaned = -0.00282185 Jy
! Component: 1400  -  total flux cleaned = -0.00285946 Jy
! Component: 1450  -  total flux cleaned = -0.00287188 Jy
! Component: 1500  -  total flux cleaned = -0.00288427 Jy
! Component: 1550  -  total flux cleaned = -0.00289663 Jy
! Component: 1600  -  total flux cleaned = -0.00294505 Jy
! Component: 1650  -  total flux cleaned = -0.00301655 Jy
! Component: 1700  -  total flux cleaned = -0.00302826 Jy
! Component: 1750  -  total flux cleaned = -0.00302823 Jy
! Component: 1800  -  total flux cleaned = -0.00306299 Jy
! Component: 1850  -  total flux cleaned = -0.00308577 Jy
! Component: 1900  -  total flux cleaned = -0.00311972 Jy
! Component: 1950  -  total flux cleaned = -0.00316461 Jy
! Component: 2000  -  total flux cleaned = -0.00316455 Jy
! Total flux subtracted in 2048 components = -0.0031976 Jy
! Clean residual min=-0.000579 max=0.000652 Jy/beam
! Clean residual mean=-0.000000 rms=0.000203 Jy/beam
! Combined flux in latest and established models = 0.325054 Jy
keep
! Adding 140 model components to the UV plane model.
! The established model now contains 285 components and 0.325054 Jy
![Exited script file: muppet]
wmap "J0017-2748_X_2017_05_31_pus\_map.fits"
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7866 x 2.032 at -3.706 degrees (North through East)
! Clean map  min=-0.0010804  max=0.16114 Jy/beam
! Writing clean map to FITS file: J0017-2748_X_2017_05_31_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.161144 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.187% of the data.
!  The x-axis pixel size should ideally be below 0.1991 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000200724 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.373686 0.373686 0.747371 1.49474 2.98948 5.97897 11.9579 23.9159 47.8317 95.6635
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.161 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7866 x 2.032 at -3.706 degrees (North through East)
! Clean map  min=-0.0010804  max=0.16114 Jy/beam
! Error occured in command: mapplot
! 
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! <Aborted by EOF>
! 4 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 5 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 6 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 7 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 8 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 9 consecutive EOF's on stdin - 10 will exit program
! <Aborted by EOF>
! 10 consecutive EOF's on stdin - 10 will exit program
! Log file J0017-2748_X_2017_05_31_pus_uvs.log closed on Tue Feb  5 10:42:08 2019