! Started logfile: J0016-2343_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:28:42 2019 obs J0016-2343_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0016-2343_S_2017_05_31_pus_uva.fits ! AN table 1: 96 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.972685 visibilities/baseline/integration-bin. ! Found source: J0016-2343 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 16808 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0016-2343_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 110 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 82 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 396 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.958244Jy sigma=0.006619 ! Fit after self-cal, rms=0.945060Jy sigma=0.006539 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.339 mas, bmaj=7.277 mas, bpa=-8.36 degrees ! Estimated noise=1557.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0946781 Jy ! Component: 100 - total flux cleaned = 0.120279 Jy ! Total flux subtracted in 100 components = 0.120279 Jy ! Clean residual min=-0.007503 max=0.011135 Jy/beam ! Clean residual mean=0.000052 rms=0.002112 Jy/beam ! Combined flux in latest and established models = 0.120279 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.120279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.454898Jy sigma=0.000690 ! Fit after self-cal, rms=0.454890Jy sigma=0.000690 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.896 mas, bmaj=8.265 mas, bpa=-7.406 degrees ! Estimated noise=883.327 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144993 Jy ! Component: 100 - total flux cleaned = 0.0226471 Jy ! Component: 150 - total flux cleaned = 0.027477 Jy ! Component: 200 - total flux cleaned = 0.0282981 Jy ! Total flux subtracted in 200 components = 0.0282981 Jy ! Clean residual min=-0.004260 max=0.004792 Jy/beam ! Clean residual mean=0.000001 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.148577 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 49 components and 0.148577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.452886Jy sigma=0.000677 ! Fit after self-cal, rms=0.452890Jy sigma=0.000677 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.70 FD 1.01 HN 1.05 KP 1.03 ! LA 0.96 MK 1.00 NL 0.93 OV 1.00 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.13 KP 0.96 ! LA 0.95 MK 1.01 NL 1.09 OV 1.07 ! PT 1.00 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.61 FD 1.08 HN 1.10 KP 1.02 ! LA 0.95 MK 1.00 NL 0.97 OV 1.00 ! PT 0.97 SC 1.02 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.12 HN 1.01 KP 1.11 ! LA 0.97 MK 1.11 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.452890Jy sigma=0.000677 ! Fit after self-cal, rms=0.318450Jy sigma=0.000672 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.925 mas, bmaj=8.27 mas, bpa=-7.326 degrees ! Estimated noise=892.435 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00186151 Jy ! Component: 100 - total flux cleaned = 0.00239677 Jy ! Component: 150 - total flux cleaned = 0.00252861 Jy ! Component: 200 - total flux cleaned = 0.00258691 Jy ! Total flux subtracted in 200 components = 0.00258691 Jy ! Clean residual min=-0.003605 max=0.004116 Jy/beam ! Clean residual mean=0.000015 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.151164 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 71 components and 0.151164 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318117Jy sigma=0.000671 ! Fit after self-cal, rms=0.318095Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.318095Jy sigma=0.000671 ! Fit after self-cal, rms=0.321643Jy sigma=0.000670 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.926 mas, bmaj=8.279 mas, bpa=-7.31 degrees ! Estimated noise=908.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207807 Jy ! Component: 100 - total flux cleaned = 0.00246332 Jy ! Component: 150 - total flux cleaned = 0.00252194 Jy ! Component: 200 - total flux cleaned = 0.00251964 Jy ! Total flux subtracted in 200 components = 0.00251964 Jy ! Clean residual min=-0.003627 max=0.004068 Jy/beam ! Clean residual mean=0.000017 rms=0.001084 Jy/beam ! Combined flux in latest and established models = 0.153684 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 78 components and 0.153684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321236Jy sigma=0.000671 ! Fit after self-cal, rms=0.321235Jy sigma=0.000670 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000181382 Jy ! Component: 100 - total flux cleaned = -0.000129456 Jy ! Component: 150 - total flux cleaned = -0.000129325 Jy ! Component: 200 - total flux cleaned = -3.5268e-05 Jy ! Total flux subtracted in 200 components = -3.5268e-05 Jy ! Clean residual min=-0.003630 max=0.004108 Jy/beam ! Clean residual mean=0.000017 rms=0.001088 Jy/beam ! Combined flux in latest and established models = 0.153648 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 0.153648 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321034Jy sigma=0.000671 ! Fit after self-cal, rms=0.321031Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.321031Jy sigma=0.000671 ! Fit after self-cal, rms=0.284003Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=8.311 mas, bpa=-7.357 degrees ! Estimated noise=923.017 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00158667 Jy ! Component: 100 - total flux cleaned = 0.00164964 Jy ! Component: 150 - total flux cleaned = 0.00170432 Jy ! Component: 200 - total flux cleaned = 0.00175178 Jy ! Total flux subtracted in 200 components = 0.00175178 Jy ! Clean residual min=-0.003806 max=0.003877 Jy/beam ! Clean residual mean=0.000013 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.1554 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.1554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283624Jy sigma=0.000669 ! Fit after self-cal, rms=0.283614Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000308308 Jy ! Component: 100 - total flux cleaned = -0.000215633 Jy ! Component: 150 - total flux cleaned = -0.000215109 Jy ! Component: 200 - total flux cleaned = -0.000174104 Jy ! Total flux subtracted in 200 components = -0.000174104 Jy ! Clean residual min=-0.003767 max=0.003909 Jy/beam ! Clean residual mean=0.000013 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.155226 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 101 components and 0.155226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283415Jy sigma=0.000669 ! Fit after self-cal, rms=0.283413Jy sigma=0.000669 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.283413Jy sigma=0.000669 ! Fit after self-cal, rms=0.294279Jy sigma=0.000669 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.576 mas, bmaj=19.91 mas, bpa=-3.458 degrees ! Estimated noise=1211.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00254717 Jy ! Component: 100 - total flux cleaned = 0.00255126 Jy ! Component: 150 - total flux cleaned = 0.00250165 Jy ! Component: 200 - total flux cleaned = 0.00240441 Jy ! Total flux subtracted in 200 components = 0.00240441 Jy ! Clean residual min=-0.005177 max=0.006968 Jy/beam ! Clean residual mean=0.000029 rms=0.001848 Jy/beam ! Combined flux in latest and established models = 0.15763 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 108 components and 0.15763 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293920Jy sigma=0.000670 ! Fit after self-cal, rms=0.293925Jy sigma=0.000669 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000100248 Jy ! Component: 100 - total flux cleaned = -0.000144604 Jy ! Component: 150 - total flux cleaned = -0.000230648 Jy ! Component: 200 - total flux cleaned = -0.000310227 Jy ! Total flux subtracted in 200 components = -0.000310227 Jy ! Clean residual min=-0.005233 max=0.007048 Jy/beam ! Clean residual mean=0.000029 rms=0.001867 Jy/beam ! Combined flux in latest and established models = 0.15732 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 110 components and 0.15732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.293752Jy sigma=0.000670 ! Fit after self-cal, rms=0.293754Jy sigma=0.000670 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=8.317 mas, bpa=-7.359 degrees ! Estimated noise=937.964 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.928 x 8.317 at -7.359 degrees (North through East) ! Clean map min=-0.0094704 max=0.13259 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.369 mas, bmaj=7.306 mas, bpa=-8.282 degrees ! Estimated noise=1644.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0994964 Jy ! Component: 100 - total flux cleaned = 0.126138 Jy ! Component: 150 - total flux cleaned = 0.139034 Jy ! Component: 200 - total flux cleaned = 0.147324 Jy ! Total flux subtracted in 200 components = 0.147324 Jy ! Clean residual min=-0.006674 max=0.007353 Jy/beam ! Clean residual mean=0.000047 rms=0.001739 Jy/beam ! Combined flux in latest and established models = 0.147324 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 38 model components to the UV plane model. ! The established model now contains 38 components and 0.147324 Jy ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=8.317 mas, bpa=-7.359 degrees ! Estimated noise=937.964 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00633388 Jy ! Component: 100 - total flux cleaned = 0.00759913 Jy ! Component: 150 - total flux cleaned = 0.00848637 Jy ! Component: 200 - total flux cleaned = 0.00902699 Jy ! Total flux subtracted in 200 components = 0.00902699 Jy ! Clean residual min=-0.004122 max=0.003920 Jy/beam ! Clean residual mean=0.000013 rms=0.001067 Jy/beam ! Combined flux in latest and established models = 0.156351 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 66 components and 0.156351 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.576 mas, bmaj=19.91 mas, bpa=-3.458 degrees ! Estimated noise=1211.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022747 Jy ! Component: 100 - total flux cleaned = 0.00244315 Jy ! Component: 150 - total flux cleaned = 0.0023721 Jy ! Component: 200 - total flux cleaned = 0.00223486 Jy ! Total flux subtracted in 200 components = 0.00223486 Jy ! Clean residual min=-0.004994 max=0.006688 Jy/beam ! Clean residual mean=0.000029 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 0.158586 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130501 Jy ! Component: 100 - total flux cleaned = -0.000196614 Jy ! Component: 150 - total flux cleaned = -0.000319441 Jy ! Component: 200 - total flux cleaned = -0.000437439 Jy ! Total flux subtracted in 200 components = -0.000437439 Jy ! Clean residual min=-0.005060 max=0.006795 Jy/beam ! Clean residual mean=0.000029 rms=0.001823 Jy/beam ! Combined flux in latest and established models = 0.158148 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.158148 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=8.317 mas, bpa=-7.359 degrees ! Estimated noise=937.964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000554563 Jy ! Component: 100 - total flux cleaned = -0.000206797 Jy ! Component: 150 - total flux cleaned = 9.35221e-05 Jy ! Component: 200 - total flux cleaned = 0.00020099 Jy ! Total flux subtracted in 200 components = 0.00020099 Jy ! Clean residual min=-0.003927 max=0.004259 Jy/beam ! Clean residual mean=0.000014 rms=0.001078 Jy/beam ! Combined flux in latest and established models = 0.158349 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 95 components and 0.158349 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.294024Jy sigma=0.000669 ! Fit after self-cal, rms=0.294020Jy sigma=0.000669 wmodel J0016-2343_S_2017_05_31_pus_map.mod ! Writing 95 model components to file: J0016-2343_S_2017_05_31_pus_map.mod wobs J0016-2343_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0016-2343_S_2017_05_31_pus_uvs.fits wwins J0016-2343_S_2017_05_31_pus_map.win ! wwins: Wrote 2 windows to J0016-2343_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000886755 Jy ! Component: 100 - total flux cleaned = 0.00128329 Jy ! Component: 150 - total flux cleaned = 0.00140665 Jy ! Component: 200 - total flux cleaned = 0.00146511 Jy ! Component: 250 - total flux cleaned = 0.00163348 Jy ! Component: 300 - total flux cleaned = 0.00179743 Jy ! Component: 350 - total flux cleaned = 0.00200816 Jy ! Component: 400 - total flux cleaned = 0.00200829 Jy ! Component: 450 - total flux cleaned = 0.00215951 Jy ! Component: 500 - total flux cleaned = 0.00215892 Jy ! Component: 550 - total flux cleaned = 0.00215844 Jy ! Component: 600 - total flux cleaned = 0.00220566 Jy ! Component: 650 - total flux cleaned = 0.00215801 Jy ! Component: 700 - total flux cleaned = 0.00211187 Jy ! Component: 750 - total flux cleaned = 0.00211153 Jy ! Component: 800 - total flux cleaned = 0.00202221 Jy ! Component: 850 - total flux cleaned = 0.0019787 Jy ! Component: 900 - total flux cleaned = 0.00189235 Jy ! Component: 950 - total flux cleaned = 0.00185004 Jy ! Component: 1000 - total flux cleaned = 0.00176552 Jy ! Component: 1050 - total flux cleaned = 0.00176545 Jy ! Component: 1100 - total flux cleaned = 0.0018065 Jy ! Component: 1150 - total flux cleaned = 0.00172492 Jy ! Component: 1200 - total flux cleaned = 0.00164405 Jy ! Component: 1250 - total flux cleaned = 0.00168383 Jy ! Component: 1300 - total flux cleaned = 0.0016443 Jy ! Component: 1350 - total flux cleaned = 0.00168381 Jy ! Component: 1400 - total flux cleaned = 0.00172285 Jy ! Component: 1450 - total flux cleaned = 0.0016843 Jy ! Component: 1500 - total flux cleaned = 0.00179853 Jy ! Component: 1550 - total flux cleaned = 0.00176063 Jy ! Component: 1600 - total flux cleaned = 0.00183576 Jy ! Component: 1650 - total flux cleaned = 0.00194749 Jy ! Component: 1700 - total flux cleaned = 0.00183669 Jy ! Component: 1750 - total flux cleaned = 0.00198372 Jy ! Component: 1800 - total flux cleaned = 0.00198375 Jy ! Component: 1850 - total flux cleaned = 0.00209178 Jy ! Component: 1900 - total flux cleaned = 0.0020558 Jy ! Component: 1950 - total flux cleaned = 0.00205599 Jy ! Component: 2000 - total flux cleaned = 0.00209164 Jy ! Component: 2050 - total flux cleaned = 0.00223191 Jy ! Component: 2100 - total flux cleaned = 0.00223155 Jy ! Component: 2150 - total flux cleaned = 0.00223133 Jy ! Component: 2200 - total flux cleaned = 0.00226576 Jy ! Component: 2250 - total flux cleaned = 0.00223173 Jy ! Component: 2300 - total flux cleaned = 0.00219797 Jy ! Component: 2350 - total flux cleaned = 0.0022659 Jy ! Component: 2400 - total flux cleaned = 0.00236686 Jy ! Component: 2450 - total flux cleaned = 0.00233327 Jy ! Component: 2500 - total flux cleaned = 0.00226666 Jy ! Component: 2550 - total flux cleaned = 0.00236596 Jy ! Component: 2600 - total flux cleaned = 0.00236565 Jy ! Component: 2650 - total flux cleaned = 0.00230002 Jy ! Component: 2700 - total flux cleaned = 0.00236512 Jy ! Component: 2750 - total flux cleaned = 0.00239715 Jy ! Component: 2800 - total flux cleaned = 0.00233242 Jy ! Component: 2850 - total flux cleaned = 0.00233219 Jy ! Component: 2900 - total flux cleaned = 0.00236409 Jy ! Component: 2950 - total flux cleaned = 0.00239563 Jy ! Component: 3000 - total flux cleaned = 0.00236387 Jy ! Component: 3050 - total flux cleaned = 0.00233245 Jy ! Component: 3100 - total flux cleaned = 0.00242652 Jy ! Component: 3150 - total flux cleaned = 0.0023642 Jy ! Component: 3200 - total flux cleaned = 0.00242645 Jy ! Component: 3250 - total flux cleaned = 0.00248807 Jy ! Component: 3300 - total flux cleaned = 0.00248806 Jy ! Component: 3350 - total flux cleaned = 0.00242702 Jy ! Component: 3400 - total flux cleaned = 0.00242699 Jy ! Component: 3450 - total flux cleaned = 0.00245725 Jy ! Component: 3500 - total flux cleaned = 0.00242699 Jy ! Component: 3550 - total flux cleaned = 0.0024873 Jy ! Component: 3600 - total flux cleaned = 0.00248736 Jy ! Component: 3650 - total flux cleaned = 0.00248728 Jy ! Component: 3700 - total flux cleaned = 0.00242782 Jy ! Component: 3750 - total flux cleaned = 0.00245747 Jy ! Component: 3800 - total flux cleaned = 0.00245748 Jy ! Component: 3850 - total flux cleaned = 0.00234019 Jy ! Component: 3900 - total flux cleaned = 0.00236937 Jy ! Component: 3950 - total flux cleaned = 0.00239865 Jy ! Component: 4000 - total flux cleaned = 0.00234053 Jy ! Component: 4050 - total flux cleaned = 0.00236967 Jy ! Total flux subtracted in 4096 components = 0.0023698 Jy ! Clean residual min=-0.002043 max=0.001440 Jy/beam ! Clean residual mean=0.000016 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.160719 Jy keep ! Adding 291 model components to the UV plane model. ! The established model now contains 385 components and 0.160719 Jy ![Exited script file: muppet] wmap "J0016-2343_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.928 x 8.317 at -7.359 degrees (North through East) ! Clean map min=-0.0079302 max=0.13324 Jy/beam ! Writing clean map to FITS file: J0016-2343_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.133243 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000551531 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.24179 1.24179 2.48358 4.96716 9.93432 19.8686 39.7373 79.4745 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.133 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.928 x 8.317 at -7.359 degrees (North through East) ! Clean map min=-0.0079302 max=0.13324 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0016-2343_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:28:48 2019