! Started logfile: J0016-0015_S_2017_05_27_pus_uvs.log on Fri May 3 10:52:36 2019 obs J0016-0015_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0016-0015_S_2017_05_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.672222 visibilities/baseline/integration-bin. ! Found source: J0016-0015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 968 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0016-0015_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 15 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.295473Jy sigma=0.002297 ! Fit after self-cal, rms=0.287388Jy sigma=0.002233 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.763 mas, bmaj=8.063 mas, bpa=-7.95 degrees ! Estimated noise=3639.56 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.566645 Jy ! Component: 100 - total flux cleaned = 0.710937 Jy ! Total flux subtracted in 100 components = 0.710937 Jy ! Clean residual min=-0.029687 max=0.064477 Jy/beam ! Clean residual mean=0.000012 rms=0.011391 Jy/beam ! Combined flux in latest and established models = 0.710937 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.710937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154790Jy sigma=0.001239 ! Fit after self-cal, rms=0.154787Jy sigma=0.001239 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.255 mas, bmaj=8.857 mas, bpa=-7.018 degrees ! Estimated noise=3152.75 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0842037 Jy ! Component: 100 - total flux cleaned = 0.12433 Jy ! Component: 150 - total flux cleaned = 0.147216 Jy ! Component: 200 - total flux cleaned = 0.160766 Jy ! Total flux subtracted in 200 components = 0.160766 Jy ! Clean residual min=-0.023000 max=0.023632 Jy/beam ! Clean residual mean=-0.000034 rms=0.005565 Jy/beam ! Combined flux in latest and established models = 0.871702 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 64 components and 0.871702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106379Jy sigma=0.000818 ! Fit after self-cal, rms=0.106386Jy sigma=0.000818 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.02 KP 1.01 ! LA 0.99 MK 0.94 NL 0.89 OV 1.03 ! PT 1.06 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.92 HN 1.07 KP 0.95 ! LA 0.96 MK 0.95 NL 1.03 OV 1.06 ! PT 1.03 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.06 KP 1.00 ! LA 0.99 MK 0.98 NL 1.03 OV 0.98 ! PT 1.01 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.09 KP 1.00* ! LA 1.05 MK 1.31 NL 1.00* OV 1.00* ! PT 1.07 SC 1.00* ! ! ! Fit before self-cal, rms=0.106386Jy sigma=0.000818 ! Fit after self-cal, rms=0.084533Jy sigma=0.000649 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.267 mas, bmaj=8.942 mas, bpa=-7.138 degrees ! Estimated noise=3136.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159825 Jy ! Component: 100 - total flux cleaned = 0.00143807 Jy ! Component: 150 - total flux cleaned = 0.00150751 Jy ! Component: 200 - total flux cleaned = 0.00157183 Jy ! Total flux subtracted in 200 components = 0.00157183 Jy ! Clean residual min=-0.009134 max=0.009271 Jy/beam ! Clean residual mean=0.000004 rms=0.002560 Jy/beam ! Combined flux in latest and established models = 0.873274 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 73 components and 0.873274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084364Jy sigma=0.000647 ! Fit after self-cal, rms=0.084359Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084359Jy sigma=0.000647 ! Fit after self-cal, rms=0.084277Jy sigma=0.000647 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.264 mas, bmaj=8.945 mas, bpa=-7.181 degrees ! Estimated noise=3134.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000828677 Jy ! Component: 100 - total flux cleaned = 0.000889235 Jy ! Component: 150 - total flux cleaned = 0.000941648 Jy ! Component: 200 - total flux cleaned = 0.00104185 Jy ! Total flux subtracted in 200 components = 0.00104185 Jy ! Clean residual min=-0.009091 max=0.009222 Jy/beam ! Clean residual mean=0.000004 rms=0.002537 Jy/beam ! Combined flux in latest and established models = 0.874316 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 0.874316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084182Jy sigma=0.000646 ! Fit after self-cal, rms=0.084176Jy sigma=0.000646 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00017024 Jy ! Component: 100 - total flux cleaned = 0.000217713 Jy ! Component: 150 - total flux cleaned = 0.000311223 Jy ! Component: 200 - total flux cleaned = 0.000397287 Jy ! Total flux subtracted in 200 components = 0.000397287 Jy ! Clean residual min=-0.009040 max=0.009159 Jy/beam ! Clean residual mean=0.000004 rms=0.002522 Jy/beam ! Combined flux in latest and established models = 0.874713 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 85 components and 0.874713 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084116Jy sigma=0.000646 ! Fit after self-cal, rms=0.084113Jy sigma=0.000646 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084113Jy sigma=0.000646 ! Fit after self-cal, rms=0.084044Jy sigma=0.000646 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.261 mas, bmaj=8.947 mas, bpa=-7.214 degrees ! Estimated noise=3132.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000302345 Jy ! Component: 100 - total flux cleaned = 0.000448404 Jy ! Component: 150 - total flux cleaned = 0.000490471 Jy ! Component: 200 - total flux cleaned = 0.000530954 Jy ! Total flux subtracted in 200 components = 0.000530954 Jy ! Clean residual min=-0.009030 max=0.009229 Jy/beam ! Clean residual mean=0.000004 rms=0.002507 Jy/beam ! Combined flux in latest and established models = 0.875244 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 0.875244 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083984Jy sigma=0.000645 ! Fit after self-cal, rms=0.083980Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.97612e-06 Jy ! Component: 100 - total flux cleaned = 9.06394e-05 Jy ! Component: 150 - total flux cleaned = 0.000168624 Jy ! Component: 200 - total flux cleaned = 0.000241226 Jy ! Total flux subtracted in 200 components = 0.000241226 Jy ! Clean residual min=-0.008991 max=0.009231 Jy/beam ! Clean residual mean=0.000004 rms=0.002493 Jy/beam ! Combined flux in latest and established models = 0.875486 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 91 components and 0.875486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083933Jy sigma=0.000645 ! Fit after self-cal, rms=0.083929Jy sigma=0.000645 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083929Jy sigma=0.000645 ! Fit after self-cal, rms=0.083892Jy sigma=0.000645 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.363 mas, bmaj=14.98 mas, bpa=-4.178 degrees ! Estimated noise=3793.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230502 Jy ! Component: 100 - total flux cleaned = 0.00214527 Jy ! Component: 150 - total flux cleaned = 0.00202123 Jy ! Component: 200 - total flux cleaned = 0.0019686 Jy ! Total flux subtracted in 200 components = 0.0019686 Jy ! Clean residual min=-0.011029 max=0.010009 Jy/beam ! Clean residual mean=0.000007 rms=0.003454 Jy/beam ! Combined flux in latest and established models = 0.877454 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 95 components and 0.877454 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083901Jy sigma=0.000645 ! Fit after self-cal, rms=0.083808Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.1451e-06 Jy ! Component: 100 - total flux cleaned = 7.50317e-05 Jy ! Component: 150 - total flux cleaned = 2.06514e-05 Jy ! Component: 200 - total flux cleaned = -2.81634e-05 Jy ! Total flux subtracted in 200 components = -2.81634e-05 Jy ! Clean residual min=-0.010679 max=0.009907 Jy/beam ! Clean residual mean=0.000007 rms=0.003399 Jy/beam ! Combined flux in latest and established models = 0.877426 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 97 components and 0.877426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083813Jy sigma=0.000645 ! Fit after self-cal, rms=0.083747Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.258 mas, bmaj=8.949 mas, bpa=-7.244 degrees ! Estimated noise=3130.75 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.258 x 8.949 at -7.244 degrees (North through East) ! Clean map min=-0.0087564 max=0.73368 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083747Jy sigma=0.000644 ! Fit after self-cal, rms=0.078814Jy sigma=0.000601 ! Inverting map and beam ! Estimated beam: bmin=3.256 mas, bmaj=8.956 mas, bpa=-7.301 degrees ! Estimated noise=3131.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000261484 Jy ! Component: 100 - total flux cleaned = 0.000422685 Jy ! Component: 150 - total flux cleaned = 0.000513073 Jy ! Component: 200 - total flux cleaned = 0.00051368 Jy ! Total flux subtracted in 200 components = 0.00051368 Jy ! Clean residual min=-0.009010 max=0.009468 Jy/beam ! Clean residual mean=0.000005 rms=0.002436 Jy/beam ! Combined flux in latest and established models = 0.87794 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 100 components and 0.87794 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078747Jy sigma=0.000601 ! Fit after self-cal, rms=0.078745Jy sigma=0.000601 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.23664e-05 Jy ! Component: 100 - total flux cleaned = 0.000135809 Jy ! Component: 150 - total flux cleaned = 0.000172556 Jy ! Component: 200 - total flux cleaned = 0.000173966 Jy ! Total flux subtracted in 200 components = 0.000173966 Jy ! Clean residual min=-0.008921 max=0.009483 Jy/beam ! Clean residual mean=0.000005 rms=0.002427 Jy/beam ! Combined flux in latest and established models = 0.878114 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 103 components and 0.878114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078707Jy sigma=0.000600 ! Fit after self-cal, rms=0.078706Jy sigma=0.000600 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078706Jy sigma=0.000600 ! Fit after self-cal, rms=0.078653Jy sigma=0.000600 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.755 mas, bmaj=8.133 mas, bpa=-8.104 degrees ! Estimated noise=3652.93 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.568555 Jy ! Component: 100 - total flux cleaned = 0.716234 Jy ! Component: 150 - total flux cleaned = 0.779836 Jy ! Component: 200 - total flux cleaned = 0.815502 Jy ! Total flux subtracted in 200 components = 0.815502 Jy ! Clean residual min=-0.014587 max=0.020911 Jy/beam ! Clean residual mean=0.000017 rms=0.004738 Jy/beam ! Combined flux in latest and established models = 0.815502 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 41 model components to the UV plane model. ! The established model now contains 41 components and 0.815502 Jy ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=8.958 mas, bpa=-7.332 degrees ! Estimated noise=3129.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274381 Jy ! Component: 100 - total flux cleaned = 0.0425382 Jy ! Component: 150 - total flux cleaned = 0.0520629 Jy ! Component: 200 - total flux cleaned = 0.0582739 Jy ! Total flux subtracted in 200 components = 0.0582739 Jy ! Clean residual min=-0.009425 max=0.009515 Jy/beam ! Clean residual mean=0.000005 rms=0.002336 Jy/beam ! Combined flux in latest and established models = 0.873776 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 93 components and 0.873776 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.357 mas, bmaj=14.98 mas, bpa=-4.303 degrees ! Estimated noise=3797.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00643989 Jy ! Component: 100 - total flux cleaned = 0.00979183 Jy ! Component: 150 - total flux cleaned = 0.0110588 Jy ! Component: 200 - total flux cleaned = 0.0111836 Jy ! Total flux subtracted in 200 components = 0.0111836 Jy ! Clean residual min=-0.009049 max=0.009953 Jy/beam ! Clean residual mean=0.000012 rms=0.003071 Jy/beam ! Combined flux in latest and established models = 0.88496 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010168 Jy ! Component: 100 - total flux cleaned = 0.000187236 Jy ! Component: 150 - total flux cleaned = 0.000187403 Jy ! Component: 200 - total flux cleaned = 0.000221754 Jy ! Total flux subtracted in 200 components = 0.000221754 Jy ! Clean residual min=-0.008909 max=0.009896 Jy/beam ! Clean residual mean=0.000013 rms=0.003046 Jy/beam ! Combined flux in latest and established models = 0.885181 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 139 components and 0.885181 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.253 mas, bmaj=8.958 mas, bpa=-7.332 degrees ! Estimated noise=3129.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000493591 Jy ! Component: 100 - total flux cleaned = 0.000542717 Jy ! Component: 150 - total flux cleaned = 0.000586091 Jy ! Component: 200 - total flux cleaned = 0.000546071 Jy ! Total flux subtracted in 200 components = 0.000546071 Jy ! Clean residual min=-0.008371 max=0.009433 Jy/beam ! Clean residual mean=0.000007 rms=0.002189 Jy/beam ! Combined flux in latest and established models = 0.885727 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 153 components and 0.885727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078043Jy sigma=0.000595 ! Fit after self-cal, rms=0.077945Jy sigma=0.000595 wmodel J0016-0015_S_2017_05_27_pus_map.mod ! Writing 153 model components to file: J0016-0015_S_2017_05_27_pus_map.mod wobs J0016-0015_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0016-0015_S_2017_05_27_pus_uvs.fits wwins J0016-0015_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0016-0015_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000461416 Jy ! Component: 100 - total flux cleaned = -0.000605881 Jy ! Component: 150 - total flux cleaned = -0.000851277 Jy ! Component: 200 - total flux cleaned = -0.000620166 Jy ! Component: 250 - total flux cleaned = -0.000617309 Jy ! Component: 300 - total flux cleaned = -0.000616213 Jy ! Component: 350 - total flux cleaned = -0.000709683 Jy ! Component: 400 - total flux cleaned = -0.000796097 Jy ! Component: 450 - total flux cleaned = -0.00112603 Jy ! Component: 500 - total flux cleaned = -0.001284 Jy ! Component: 550 - total flux cleaned = -0.0012092 Jy ! Component: 600 - total flux cleaned = -0.00136063 Jy ! Component: 650 - total flux cleaned = -0.00164691 Jy ! Component: 700 - total flux cleaned = -0.00178379 Jy ! Component: 750 - total flux cleaned = -0.00164897 Jy ! Component: 800 - total flux cleaned = -0.0014564 Jy ! Component: 850 - total flux cleaned = -0.00151943 Jy ! Component: 900 - total flux cleaned = -0.00133695 Jy ! Component: 950 - total flux cleaned = -0.00121835 Jy ! Component: 1000 - total flux cleaned = -0.00104541 Jy ! Component: 1050 - total flux cleaned = -0.000990674 Jy ! Component: 1100 - total flux cleaned = -0.00082698 Jy ! Component: 1150 - total flux cleaned = -0.000667829 Jy ! Component: 1200 - total flux cleaned = -0.00051308 Jy ! Component: 1250 - total flux cleaned = -0.000310298 Jy ! Component: 1300 - total flux cleaned = -0.00011094 Jy ! Component: 1350 - total flux cleaned = 0.000179661 Jy ! Component: 1400 - total flux cleaned = 0.00041616 Jy ! Component: 1450 - total flux cleaned = 0.000555861 Jy ! Component: 1500 - total flux cleaned = 0.000873476 Jy ! Component: 1550 - total flux cleaned = 0.00113971 Jy ! Component: 1600 - total flux cleaned = 0.00140011 Jy ! Component: 1650 - total flux cleaned = 0.0015712 Jy ! Component: 1700 - total flux cleaned = 0.00182322 Jy ! Component: 1750 - total flux cleaned = 0.00211223 Jy ! Component: 1800 - total flux cleaned = 0.00239696 Jy ! Component: 1850 - total flux cleaned = 0.00259693 Jy ! Component: 1900 - total flux cleaned = 0.00283378 Jy ! Component: 1950 - total flux cleaned = 0.00287304 Jy ! Component: 2000 - total flux cleaned = 0.00295065 Jy ! Component: 2050 - total flux cleaned = 0.00306508 Jy ! Component: 2100 - total flux cleaned = 0.00314104 Jy ! Component: 2150 - total flux cleaned = 0.00317883 Jy ! Component: 2200 - total flux cleaned = 0.00325387 Jy ! Component: 2250 - total flux cleaned = 0.00321675 Jy ! Component: 2300 - total flux cleaned = 0.0033275 Jy ! Component: 2350 - total flux cleaned = 0.00332753 Jy ! Component: 2400 - total flux cleaned = 0.0033641 Jy ! Component: 2450 - total flux cleaned = 0.00332756 Jy ! Component: 2500 - total flux cleaned = 0.00347304 Jy ! Component: 2550 - total flux cleaned = 0.00347294 Jy ! Component: 2600 - total flux cleaned = 0.00343687 Jy ! Component: 2650 - total flux cleaned = 0.00340064 Jy ! Component: 2700 - total flux cleaned = 0.00347273 Jy ! Component: 2750 - total flux cleaned = 0.00343704 Jy ! Component: 2800 - total flux cleaned = 0.00340104 Jy ! Component: 2850 - total flux cleaned = 0.00343733 Jy ! Component: 2900 - total flux cleaned = 0.00336556 Jy ! Component: 2950 - total flux cleaned = 0.00329378 Jy ! Component: 3000 - total flux cleaned = 0.00329393 Jy ! Component: 3050 - total flux cleaned = 0.00322158 Jy ! Component: 3100 - total flux cleaned = 0.00314918 Jy ! Component: 3150 - total flux cleaned = 0.00318547 Jy ! Component: 3200 - total flux cleaned = 0.00314907 Jy ! Component: 3250 - total flux cleaned = 0.0031129 Jy ! Component: 3300 - total flux cleaned = 0.00318609 Jy ! Component: 3350 - total flux cleaned = 0.00318619 Jy ! Component: 3400 - total flux cleaned = 0.00322294 Jy ! Component: 3450 - total flux cleaned = 0.00322299 Jy ! Component: 3500 - total flux cleaned = 0.00322297 Jy ! Component: 3550 - total flux cleaned = 0.00322299 Jy ! Component: 3600 - total flux cleaned = 0.00314791 Jy ! Component: 3650 - total flux cleaned = 0.00307227 Jy ! Component: 3700 - total flux cleaned = 0.00303443 Jy ! Component: 3750 - total flux cleaned = 0.00303439 Jy ! Component: 3800 - total flux cleaned = 0.0029962 Jy ! Component: 3850 - total flux cleaned = 0.00287971 Jy ! Component: 3900 - total flux cleaned = 0.00287925 Jy ! Component: 3950 - total flux cleaned = 0.00283983 Jy ! Component: 4000 - total flux cleaned = 0.00280055 Jy ! Component: 4050 - total flux cleaned = 0.00280058 Jy ! Total flux subtracted in 4096 components = 0.00268091 Jy ! Clean residual min=-0.002397 max=0.002359 Jy/beam ! Clean residual mean=0.000002 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.888408 Jy keep ! Adding 250 model components to the UV plane model. ! The established model now contains 403 components and 0.888408 Jy ![Exited script file: muppet] wmap "J0016-0015_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.253 x 8.958 at -7.332 degrees (North through East) ! Clean map min=-0.0052844 max=0.73398 Jy/beam ! Writing clean map to FITS file: J0016-0015_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.733976 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000707268 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.289084 0.289084 0.578167 1.15633 2.31267 4.62534 9.25068 18.5014 37.0027 74.0054 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.733 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.253 x 8.958 at -7.332 degrees (North through East) ! Clean map min=-0.0052844 max=0.73398 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0016-0015_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:52:40 2019