! Started logfile: J0016-0015_S_2017_05_01_pus_uvs.log on Wed May 1 18:21:31 2019 obs J0016-0015_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0016-0015_S_2017_05_01_pus_uva.fits ! AN table 1: 35 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.229206 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0016-0015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 1444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0016-0015_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 211 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 277 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.287670Jy sigma=0.001887 ! Fit after self-cal, rms=0.270038Jy sigma=0.001748 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.3 mas, bmaj=7.038 mas, bpa=-10.84 degrees ! Estimated noise=3657.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.584184 Jy ! Component: 100 - total flux cleaned = 0.73354 Jy ! Total flux subtracted in 100 components = 0.73354 Jy ! Clean residual min=-0.033480 max=0.070344 Jy/beam ! Clean residual mean=0.000580 rms=0.013834 Jy/beam ! Combined flux in latest and established models = 0.733539 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.733539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156345Jy sigma=0.001129 ! Fit after self-cal, rms=0.156329Jy sigma=0.001129 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.214 mas, bmaj=9.001 mas, bpa=-18.6 degrees ! Estimated noise=2913.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0878254 Jy ! Component: 100 - total flux cleaned = 0.125994 Jy ! Component: 150 - total flux cleaned = 0.145629 Jy ! Component: 200 - total flux cleaned = 0.15631 Jy ! Total flux subtracted in 200 components = 0.15631 Jy ! Clean residual min=-0.020062 max=0.017918 Jy/beam ! Clean residual mean=0.000161 rms=0.005428 Jy/beam ! Combined flux in latest and established models = 0.88985 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 64 components and 0.88985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109237Jy sigma=0.000734 ! Fit after self-cal, rms=0.109239Jy sigma=0.000734 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.90 HN 1.02 KP 1.03 ! LA 1.01 MK 0.99 NL 1.02 OV 1.03 ! PT 1.02 SC 0.94 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.93 HN 1.11 KP 0.99 ! LA 0.98 MK 0.95 NL 1.12 OV 1.06 ! PT 0.99 SC 0.97 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.96 HN 1.01 KP 1.02 ! LA 1.01 MK 0.97 NL 1.11 OV 0.97 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.02 HN 1.00* KP 1.00* ! LA 0.91 MK 1.20 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.109239Jy sigma=0.000734 ! Fit after self-cal, rms=0.095185Jy sigma=0.000629 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.228 mas, bmaj=9.399 mas, bpa=-20.22 degrees ! Estimated noise=2935.74 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200127 Jy ! Component: 100 - total flux cleaned = 0.00252118 Jy ! Component: 150 - total flux cleaned = 0.00277978 Jy ! Component: 200 - total flux cleaned = 0.00292507 Jy ! Total flux subtracted in 200 components = 0.00292507 Jy ! Clean residual min=-0.007830 max=0.006656 Jy/beam ! Clean residual mean=-0.000013 rms=0.002045 Jy/beam ! Combined flux in latest and established models = 0.892775 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 70 components and 0.892775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094938Jy sigma=0.000628 ! Fit after self-cal, rms=0.094930Jy sigma=0.000627 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094930Jy sigma=0.000627 ! Fit after self-cal, rms=0.095026Jy sigma=0.000627 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.225 mas, bmaj=9.387 mas, bpa=-20.18 degrees ! Estimated noise=2937.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169506 Jy ! Component: 100 - total flux cleaned = 0.00175234 Jy ! Component: 150 - total flux cleaned = 0.00179826 Jy ! Component: 200 - total flux cleaned = 0.00179601 Jy ! Total flux subtracted in 200 components = 0.00179601 Jy ! Clean residual min=-0.007841 max=0.006231 Jy/beam ! Clean residual mean=-0.000011 rms=0.001962 Jy/beam ! Combined flux in latest and established models = 0.894571 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 75 components and 0.894571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094938Jy sigma=0.000627 ! Fit after self-cal, rms=0.094924Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501135 Jy ! Component: 100 - total flux cleaned = 0.000326325 Jy ! Component: 150 - total flux cleaned = 0.00015276 Jy ! Component: 200 - total flux cleaned = 4.18182e-05 Jy ! Total flux subtracted in 200 components = 4.18182e-05 Jy ! Clean residual min=-0.007777 max=0.005972 Jy/beam ! Clean residual mean=-0.000010 rms=0.001925 Jy/beam ! Combined flux in latest and established models = 0.894613 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 80 components and 0.894613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094884Jy sigma=0.000626 ! Fit after self-cal, rms=0.094865Jy sigma=0.000626 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094865Jy sigma=0.000626 ! Fit after self-cal, rms=0.094903Jy sigma=0.000626 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.224 mas, bmaj=9.395 mas, bpa=-20.24 degrees ! Estimated noise=2938.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107938 Jy ! Component: 100 - total flux cleaned = 0.00104122 Jy ! Component: 150 - total flux cleaned = 0.00104238 Jy ! Component: 200 - total flux cleaned = 0.00109682 Jy ! Total flux subtracted in 200 components = 0.00109682 Jy ! Clean residual min=-0.007639 max=0.005869 Jy/beam ! Clean residual mean=-0.000008 rms=0.001875 Jy/beam ! Combined flux in latest and established models = 0.89571 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 87 components and 0.89571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094864Jy sigma=0.000626 ! Fit after self-cal, rms=0.094850Jy sigma=0.000626 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000324388 Jy ! Component: 100 - total flux cleaned = 0.000232697 Jy ! Component: 150 - total flux cleaned = 0.000233078 Jy ! Component: 200 - total flux cleaned = 0.000210194 Jy ! Total flux subtracted in 200 components = 0.000210194 Jy ! Clean residual min=-0.007589 max=0.005794 Jy/beam ! Clean residual mean=-0.000008 rms=0.001854 Jy/beam ! Combined flux in latest and established models = 0.89592 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 90 components and 0.89592 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094825Jy sigma=0.000626 ! Fit after self-cal, rms=0.094816Jy sigma=0.000625 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094816Jy sigma=0.000625 ! Fit after self-cal, rms=0.094849Jy sigma=0.000625 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.75 mas, bmaj=12.66 mas, bpa=-22.04 degrees ! Estimated noise=3196.3 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000820335 Jy ! Component: 100 - total flux cleaned = 0.000746343 Jy ! Component: 150 - total flux cleaned = 0.000684389 Jy ! Component: 200 - total flux cleaned = 0.00065524 Jy ! Total flux subtracted in 200 components = 0.00065524 Jy ! Clean residual min=-0.006748 max=0.006036 Jy/beam ! Clean residual mean=-0.000009 rms=0.002011 Jy/beam ! Combined flux in latest and established models = 0.896575 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 95 components and 0.896575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094829Jy sigma=0.000625 ! Fit after self-cal, rms=0.094810Jy sigma=0.000625 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156917 Jy ! Component: 100 - total flux cleaned = 0.000124154 Jy ! Component: 150 - total flux cleaned = 4.37399e-05 Jy ! Component: 200 - total flux cleaned = 1.94562e-05 Jy ! Total flux subtracted in 200 components = 1.94562e-05 Jy ! Clean residual min=-0.006658 max=0.005926 Jy/beam ! Clean residual mean=-0.000009 rms=0.001981 Jy/beam ! Combined flux in latest and established models = 0.896595 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 99 components and 0.896595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094803Jy sigma=0.000625 ! Fit after self-cal, rms=0.094789Jy sigma=0.000625 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.223 mas, bmaj=9.401 mas, bpa=-20.3 degrees ! Estimated noise=2938.59 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.223 x 9.401 at -20.3 degrees (North through East) ! Clean map min=-0.0073171 max=0.76852 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094789Jy sigma=0.000625 ! Fit after self-cal, rms=0.082040Jy sigma=0.000545 ! Inverting map and beam ! Estimated beam: bmin=5.222 mas, bmaj=9.41 mas, bpa=-20.35 degrees ! Estimated noise=2939.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00036755 Jy ! Component: 100 - total flux cleaned = 0.000598348 Jy ! Component: 150 - total flux cleaned = 0.000596707 Jy ! Component: 200 - total flux cleaned = 0.00062582 Jy ! Total flux subtracted in 200 components = 0.00062582 Jy ! Clean residual min=-0.007171 max=0.005664 Jy/beam ! Clean residual mean=-0.000005 rms=0.001762 Jy/beam ! Combined flux in latest and established models = 0.897221 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 102 components and 0.897221 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082000Jy sigma=0.000545 ! Fit after self-cal, rms=0.081995Jy sigma=0.000545 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.15519e-05 Jy ! Component: 100 - total flux cleaned = 0.000103363 Jy ! Component: 150 - total flux cleaned = 0.000130165 Jy ! Component: 200 - total flux cleaned = 0.000129541 Jy ! Total flux subtracted in 200 components = 0.000129541 Jy ! Clean residual min=-0.007166 max=0.005599 Jy/beam ! Clean residual mean=-0.000005 rms=0.001749 Jy/beam ! Combined flux in latest and established models = 0.89735 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 105 components and 0.89735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081969Jy sigma=0.000545 ! Fit after self-cal, rms=0.081965Jy sigma=0.000545 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081965Jy sigma=0.000545 ! Fit after self-cal, rms=0.081956Jy sigma=0.000545 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.313 mas, bmaj=7.076 mas, bpa=-10.49 degrees ! Estimated noise=3794.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.591435 Jy ! Component: 100 - total flux cleaned = 0.741241 Jy ! Component: 150 - total flux cleaned = 0.808269 Jy ! Component: 200 - total flux cleaned = 0.844333 Jy ! Total flux subtracted in 200 components = 0.844333 Jy ! Clean residual min=-0.013642 max=0.018114 Jy/beam ! Clean residual mean=0.000143 rms=0.004389 Jy/beam ! Combined flux in latest and established models = 0.844333 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 49 model components to the UV plane model. ! The established model now contains 49 components and 0.844333 Jy ! Inverting map and beam ! Estimated beam: bmin=5.221 mas, bmaj=9.413 mas, bpa=-20.39 degrees ! Estimated noise=2939.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249321 Jy ! Component: 100 - total flux cleaned = 0.0375574 Jy ! Component: 150 - total flux cleaned = 0.0443415 Jy ! Component: 200 - total flux cleaned = 0.0481098 Jy ! Total flux subtracted in 200 components = 0.0481098 Jy ! Clean residual min=-0.007653 max=0.006079 Jy/beam ! Clean residual mean=0.000010 rms=0.001871 Jy/beam ! Combined flux in latest and established models = 0.892443 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 102 components and 0.892443 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.74 mas, bmaj=12.66 mas, bpa=-22.22 degrees ! Estimated noise=3198.22 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00279617 Jy ! Component: 100 - total flux cleaned = 0.00327765 Jy ! Component: 150 - total flux cleaned = 0.00348066 Jy ! Component: 200 - total flux cleaned = 0.0036642 Jy ! Total flux subtracted in 200 components = 0.0036642 Jy ! Clean residual min=-0.006581 max=0.006124 Jy/beam ! Clean residual mean=-0.000002 rms=0.002001 Jy/beam ! Combined flux in latest and established models = 0.896107 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125965 Jy ! Component: 100 - total flux cleaned = 0.000281007 Jy ! Component: 150 - total flux cleaned = 0.000424237 Jy ! Component: 200 - total flux cleaned = 0.0005254 Jy ! Total flux subtracted in 200 components = 0.0005254 Jy ! Clean residual min=-0.006566 max=0.006020 Jy/beam ! Clean residual mean=-0.000004 rms=0.001988 Jy/beam ! Combined flux in latest and established models = 0.896633 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 110 components and 0.896633 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.221 mas, bmaj=9.413 mas, bpa=-20.39 degrees ! Estimated noise=2939.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.88503e-05 Jy ! Component: 100 - total flux cleaned = 0.000124682 Jy ! Component: 150 - total flux cleaned = 0.000248204 Jy ! Component: 200 - total flux cleaned = 0.000323985 Jy ! Total flux subtracted in 200 components = 0.000323985 Jy ! Clean residual min=-0.007227 max=0.005673 Jy/beam ! Clean residual mean=-0.000002 rms=0.001785 Jy/beam ! Combined flux in latest and established models = 0.896957 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 118 components and 0.896957 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081998Jy sigma=0.000545 ! Fit after self-cal, rms=0.081993Jy sigma=0.000545 wmodel J0016-0015_S_2017_05_01_pus_map.mod ! Writing 118 model components to file: J0016-0015_S_2017_05_01_pus_map.mod wobs J0016-0015_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0016-0015_S_2017_05_01_pus_uvs.fits wwins J0016-0015_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J0016-0015_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00231848 Jy ! Component: 100 - total flux cleaned = -0.00253147 Jy ! Component: 150 - total flux cleaned = -0.00234211 Jy ! Component: 200 - total flux cleaned = -0.00200207 Jy ! Component: 250 - total flux cleaned = -0.00135536 Jy ! Component: 300 - total flux cleaned = -0.000664888 Jy ! Component: 350 - total flux cleaned = -8.15657e-05 Jy ! Component: 400 - total flux cleaned = 0.000617132 Jy ! Component: 450 - total flux cleaned = 0.00141859 Jy ! Component: 500 - total flux cleaned = 0.00199792 Jy ! Component: 550 - total flux cleaned = 0.00286175 Jy ! Component: 600 - total flux cleaned = 0.00339676 Jy ! Component: 650 - total flux cleaned = 0.00402717 Jy ! Component: 700 - total flux cleaned = 0.00452501 Jy ! Component: 750 - total flux cleaned = 0.00506333 Jy ! Component: 800 - total flux cleaned = 0.00569065 Jy ! Component: 850 - total flux cleaned = 0.00635105 Jy ! Component: 900 - total flux cleaned = 0.00674596 Jy ! Component: 950 - total flux cleaned = 0.0073745 Jy ! Component: 1000 - total flux cleaned = 0.00784775 Jy ! Component: 1050 - total flux cleaned = 0.00835742 Jy ! Component: 1100 - total flux cleaned = 0.00890063 Jy ! Component: 1150 - total flux cleaned = 0.00934374 Jy ! Component: 1200 - total flux cleaned = 0.00973488 Jy ! Component: 1250 - total flux cleaned = 0.010245 Jy ! Component: 1300 - total flux cleaned = 0.0106201 Jy ! Component: 1350 - total flux cleaned = 0.010988 Jy ! Component: 1400 - total flux cleaned = 0.0112284 Jy ! Component: 1450 - total flux cleaned = 0.011426 Jy ! Component: 1500 - total flux cleaned = 0.0116963 Jy ! Component: 1550 - total flux cleaned = 0.0118103 Jy ! Component: 1600 - total flux cleaned = 0.0118102 Jy ! Component: 1650 - total flux cleaned = 0.0118472 Jy ! Component: 1700 - total flux cleaned = 0.0118472 Jy ! Component: 1750 - total flux cleaned = 0.0117751 Jy ! Component: 1800 - total flux cleaned = 0.0117395 Jy ! Component: 1850 - total flux cleaned = 0.0116338 Jy ! Component: 1900 - total flux cleaned = 0.0116341 Jy ! Component: 1950 - total flux cleaned = 0.0114623 Jy ! Component: 2000 - total flux cleaned = 0.0115303 Jy ! Component: 2050 - total flux cleaned = 0.0114967 Jy ! Component: 2100 - total flux cleaned = 0.0116631 Jy ! Component: 2150 - total flux cleaned = 0.011729 Jy ! Component: 2200 - total flux cleaned = 0.0118925 Jy ! Component: 2250 - total flux cleaned = 0.0121193 Jy ! Component: 2300 - total flux cleaned = 0.0124725 Jy ! Component: 2350 - total flux cleaned = 0.0126638 Jy ! Component: 2400 - total flux cleaned = 0.0129807 Jy ! Component: 2450 - total flux cleaned = 0.0132953 Jy ! Component: 2500 - total flux cleaned = 0.0136392 Jy ! Component: 2550 - total flux cleaned = 0.0138879 Jy ! Component: 2600 - total flux cleaned = 0.0140429 Jy ! Component: 2650 - total flux cleaned = 0.0142281 Jy ! Component: 2700 - total flux cleaned = 0.0143509 Jy ! Component: 2750 - total flux cleaned = 0.0145346 Jy ! Component: 2800 - total flux cleaned = 0.0146566 Jy ! Component: 2850 - total flux cleaned = 0.0148087 Jy ! Component: 2900 - total flux cleaned = 0.0148998 Jy ! Component: 2950 - total flux cleaned = 0.0150816 Jy ! Component: 3000 - total flux cleaned = 0.0152025 Jy ! Component: 3050 - total flux cleaned = 0.015384 Jy ! Component: 3100 - total flux cleaned = 0.0154442 Jy ! Component: 3150 - total flux cleaned = 0.0155347 Jy ! Component: 3200 - total flux cleaned = 0.0157157 Jy ! Component: 3250 - total flux cleaned = 0.0157762 Jy ! Component: 3300 - total flux cleaned = 0.0158969 Jy ! Component: 3350 - total flux cleaned = 0.0160478 Jy ! Component: 3400 - total flux cleaned = 0.0161385 Jy ! Component: 3450 - total flux cleaned = 0.0162595 Jy ! Component: 3500 - total flux cleaned = 0.0163805 Jy ! Component: 3550 - total flux cleaned = 0.0163805 Jy ! Component: 3600 - total flux cleaned = 0.0164109 Jy ! Component: 3650 - total flux cleaned = 0.0165326 Jy ! Component: 3700 - total flux cleaned = 0.016624 Jy ! Component: 3750 - total flux cleaned = 0.0166547 Jy ! Component: 3800 - total flux cleaned = 0.016716 Jy ! Component: 3850 - total flux cleaned = 0.0167773 Jy ! Component: 3900 - total flux cleaned = 0.0168693 Jy ! Component: 3950 - total flux cleaned = 0.0169305 Jy ! Component: 4000 - total flux cleaned = 0.0170543 Jy ! Component: 4050 - total flux cleaned = 0.0170854 Jy ! Total flux subtracted in 4096 components = 0.0171164 Jy ! Clean residual min=-0.001607 max=0.001957 Jy/beam ! Clean residual mean=-0.000000 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.914073 Jy keep ! Adding 188 model components to the UV plane model. ! The established model now contains 306 components and 0.914073 Jy ![Exited script file: muppet] wmap "J0016-0015_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.221 x 9.413 at -20.39 degrees (North through East) ! Clean map min=-0.0040208 max=0.77093 Jy/beam ! Writing clean map to FITS file: J0016-0015_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.770928 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00057105 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.222219 0.222219 0.444438 0.888877 1.77775 3.55551 7.11101 14.222 28.4441 56.8881 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.77 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.221 x 9.413 at -20.39 degrees (North through East) ! Clean map min=-0.0040208 max=0.77093 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0016-0015_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:21:38 2019