! Started logfile: J0016-0015_S_2017_04_28_pus_uvs.log on Thu May 2 16:12:37 2019 obs J0016-0015_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0016-0015_S_2017_04_28_pus_uva.fits ! AN table 1: 28 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.12619 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0016-0015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 636 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0016-0015_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 171 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 280 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.373577Jy sigma=0.002157 ! Fit after self-cal, rms=0.346659Jy sigma=0.002005 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.952 mas, bmaj=11.45 mas, bpa=33.67 degrees ! Estimated noise=10367.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.532459 Jy ! Component: 100 - total flux cleaned = 0.651433 Jy ! Total flux subtracted in 100 components = 0.651433 Jy ! Clean residual min=-0.038873 max=0.041622 Jy/beam ! Clean residual mean=-0.000147 rms=0.017628 Jy/beam ! Combined flux in latest and established models = 0.651433 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.651433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127736Jy sigma=0.000712 ! Fit after self-cal, rms=0.127701Jy sigma=0.000712 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.096 mas, bmaj=11.51 mas, bpa=31.6 degrees ! Estimated noise=5639.46 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.028943 Jy ! Component: 100 - total flux cleaned = 0.0350235 Jy ! Component: 150 - total flux cleaned = 0.0301982 Jy ! Component: 200 - total flux cleaned = 0.0191066 Jy ! Total flux subtracted in 200 components = 0.0191066 Jy ! Clean residual min=-0.014003 max=0.013785 Jy/beam ! Clean residual mean=-0.000029 rms=0.003787 Jy/beam ! Combined flux in latest and established models = 0.67054 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 52 components and 0.67054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113498Jy sigma=0.000642 ! Fit after self-cal, rms=0.113340Jy sigma=0.000640 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 0.96 KP 1.00* ! LA 1.00* MK 1.00* NL 0.92 OV 1.00* ! PT 1.00* SC 1.04 ! ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.02 KP 1.00* ! LA 1.00* MK 1.00* NL 1.08 OV 1.00* ! PT 1.00* SC 0.97 ! ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00* HN 1.00 KP 1.00* ! LA 1.00* MK 1.00* NL 0.96 OV 1.00* ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.113340Jy sigma=0.000640 ! Fit after self-cal, rms=0.103436Jy sigma=0.000581 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.15 mas, bmaj=11.35 mas, bpa=31.61 degrees ! Estimated noise=5801.28 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00389716 Jy ! Component: 100 - total flux cleaned = -0.00440566 Jy ! Component: 150 - total flux cleaned = -0.00544302 Jy ! Component: 200 - total flux cleaned = -0.00327703 Jy ! Total flux subtracted in 200 components = -0.00327703 Jy ! Clean residual min=-0.003461 max=0.003499 Jy/beam ! Clean residual mean=-0.000007 rms=0.001191 Jy/beam ! Combined flux in latest and established models = 0.667263 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 90 components and 0.667263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101908Jy sigma=0.000573 ! Fit after self-cal, rms=0.101878Jy sigma=0.000572 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101878Jy sigma=0.000572 ! Fit after self-cal, rms=0.101782Jy sigma=0.000571 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.154 mas, bmaj=11.34 mas, bpa=31.59 degrees ! Estimated noise=5795.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00369404 Jy ! Component: 100 - total flux cleaned = -0.0062033 Jy ! Component: 150 - total flux cleaned = -0.00877493 Jy ! Component: 200 - total flux cleaned = -0.0108307 Jy ! Total flux subtracted in 200 components = -0.0108307 Jy ! Clean residual min=-0.002450 max=0.002418 Jy/beam ! Clean residual mean=0.000006 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 0.656432 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 124 components and 0.656432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101459Jy sigma=0.000570 ! Fit after self-cal, rms=0.101465Jy sigma=0.000570 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284794 Jy ! Component: 100 - total flux cleaned = 0.000472616 Jy ! Component: 150 - total flux cleaned = 0.00106402 Jy ! Component: 200 - total flux cleaned = 0.00162148 Jy ! Total flux subtracted in 200 components = 0.00162148 Jy ! Clean residual min=-0.001305 max=0.001296 Jy/beam ! Clean residual mean=-0.000001 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 0.658054 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 163 components and 0.658054 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101328Jy sigma=0.000569 ! Fit after self-cal, rms=0.101323Jy sigma=0.000569 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101323Jy sigma=0.000569 ! Fit after self-cal, rms=0.101318Jy sigma=0.000568 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=11.34 mas, bpa=31.59 degrees ! Estimated noise=5795.85 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00225853 Jy ! Component: 100 - total flux cleaned = -0.00376754 Jy ! Component: 150 - total flux cleaned = -0.00497051 Jy ! Component: 200 - total flux cleaned = -0.00599067 Jy ! Total flux subtracted in 200 components = -0.00599067 Jy ! Clean residual min=-0.001200 max=0.001203 Jy/beam ! Clean residual mean=0.000003 rms=0.000416 Jy/beam ! Combined flux in latest and established models = 0.652063 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 179 components and 0.652063 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101246Jy sigma=0.000568 ! Fit after self-cal, rms=0.101248Jy sigma=0.000568 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000868137 Jy ! Component: 100 - total flux cleaned = 0.00151876 Jy ! Component: 150 - total flux cleaned = 0.00205422 Jy ! Component: 200 - total flux cleaned = 0.00247097 Jy ! Total flux subtracted in 200 components = 0.00247097 Jy ! Clean residual min=-0.000605 max=0.000612 Jy/beam ! Clean residual mean=-0.000001 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.654534 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 214 components and 0.654535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101216Jy sigma=0.000568 ! Fit after self-cal, rms=0.101214Jy sigma=0.000568 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101214Jy sigma=0.000568 ! Fit after self-cal, rms=0.101221Jy sigma=0.000568 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.978 mas, bmaj=12.58 mas, bpa=25.59 degrees ! Estimated noise=7454.51 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000549785 Jy ! Component: 100 - total flux cleaned = -0.00126617 Jy ! Component: 150 - total flux cleaned = -0.00168889 Jy ! Component: 200 - total flux cleaned = -0.00192012 Jy ! Total flux subtracted in 200 components = -0.00192012 Jy ! Clean residual min=-0.000574 max=0.000560 Jy/beam ! Clean residual mean=0.000002 rms=0.000202 Jy/beam ! Combined flux in latest and established models = 0.652614 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 230 components and 0.652614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101205Jy sigma=0.000568 ! Fit after self-cal, rms=0.101206Jy sigma=0.000568 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000767411 Jy ! Component: 100 - total flux cleaned = 0.00125956 Jy ! Component: 150 - total flux cleaned = 0.00156493 Jy ! Component: 200 - total flux cleaned = 0.00178322 Jy ! Total flux subtracted in 200 components = 0.00178322 Jy ! Clean residual min=-0.000473 max=0.000475 Jy/beam ! Clean residual mean=-0.000002 rms=0.000171 Jy/beam ! Combined flux in latest and established models = 0.654397 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 253 components and 0.654397 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101197Jy sigma=0.000568 ! Fit after self-cal, rms=0.101195Jy sigma=0.000568 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=11.34 mas, bpa=31.59 degrees ! Estimated noise=5795.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.153 x 11.34 at 31.59 degrees (North through East) ! Clean map min=-0.011161 max=0.61875 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101195Jy sigma=0.000568 ! Fit after self-cal, rms=0.078620Jy sigma=0.000427 ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=11.34 mas, bpa=31.6 degrees ! Estimated noise=5791.7 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000255675 Jy ! Component: 100 - total flux cleaned = 0.000173998 Jy ! Component: 150 - total flux cleaned = -3.38156e-05 Jy ! Component: 200 - total flux cleaned = -8.22276e-05 Jy ! Total flux subtracted in 200 components = -8.22276e-05 Jy ! Clean residual min=-0.000390 max=0.000390 Jy/beam ! Clean residual mean=-0.000001 rms=0.000110 Jy/beam ! Combined flux in latest and established models = 0.654315 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 294 components and 0.654315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078585Jy sigma=0.000427 ! Fit after self-cal, rms=0.078593Jy sigma=0.000427 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000160276 Jy ! Component: 100 - total flux cleaned = 0.000415763 Jy ! Component: 150 - total flux cleaned = 0.000634925 Jy ! Component: 200 - total flux cleaned = 0.000782631 Jy ! Total flux subtracted in 200 components = 0.000782631 Jy ! Clean residual min=-0.000348 max=0.000347 Jy/beam ! Clean residual mean=-0.000001 rms=0.000107 Jy/beam ! Combined flux in latest and established models = 0.655098 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 308 components and 0.655098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078578Jy sigma=0.000427 ! Fit after self-cal, rms=0.078584Jy sigma=0.000427 ! Inverting map ! Added new window around map position (-86.5, -127.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183748 Jy ! Component: 100 - total flux cleaned = 0.000313171 Jy ! Component: 150 - total flux cleaned = 0.000388045 Jy ! Component: 200 - total flux cleaned = 0.000397267 Jy ! Total flux subtracted in 200 components = 0.000397267 Jy ! Clean residual min=-0.000496 max=0.000540 Jy/beam ! Clean residual mean=-0.000000 rms=0.000128 Jy/beam ! Combined flux in latest and established models = 0.655495 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 326 components and 0.655495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078577Jy sigma=0.000427 ! Fit after self-cal, rms=0.078578Jy sigma=0.000427 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078578Jy sigma=0.000427 ! Fit after self-cal, rms=0.078535Jy sigma=0.000427 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.975 mas, bmaj=11.48 mas, bpa=33.77 degrees ! Estimated noise=10416.2 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.484834 Jy ! Component: 100 - total flux cleaned = 0.629529 Jy ! Component: 150 - total flux cleaned = 0.699322 Jy ! Component: 200 - total flux cleaned = 0.754071 Jy ! Total flux subtracted in 200 components = 0.754071 Jy ! Clean residual min=-0.236402 max=0.214225 Jy/beam ! Clean residual mean=-0.000418 rms=0.048742 Jy/beam ! Combined flux in latest and established models = 0.754071 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.754071 Jy ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=11.34 mas, bpa=31.61 degrees ! Estimated noise=5789.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516741 Jy ! Component: 100 - total flux cleaned = 0.0936101 Jy ! Component: 150 - total flux cleaned = 0.128928 Jy ! Component: 200 - total flux cleaned = 0.158995 Jy ! Total flux subtracted in 200 components = 0.158995 Jy ! Clean residual min=-0.114202 max=0.160230 Jy/beam ! Clean residual mean=-0.000198 rms=0.040505 Jy/beam ! Combined flux in latest and established models = 0.913065 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 51 components and 0.913065 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.974 mas, bmaj=12.57 mas, bpa=25.61 degrees ! Estimated noise=7457.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0471618 Jy ! Component: 100 - total flux cleaned = 0.0747361 Jy ! Component: 150 - total flux cleaned = 0.0952133 Jy ! Component: 200 - total flux cleaned = 0.111456 Jy ! Total flux subtracted in 200 components = 0.111456 Jy ! Clean residual min=-0.101113 max=0.143225 Jy/beam ! Clean residual mean=-0.000238 rms=0.034619 Jy/beam ! Combined flux in latest and established models = 1.02452 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131534 Jy ! Component: 100 - total flux cleaned = 0.0239397 Jy ! Component: 150 - total flux cleaned = 0.0328887 Jy ! Component: 200 - total flux cleaned = 0.0383272 Jy ! Total flux subtracted in 200 components = 0.0383272 Jy ! Clean residual min=-0.102716 max=0.137322 Jy/beam ! Clean residual mean=-0.000218 rms=0.032510 Jy/beam ! Combined flux in latest and established models = 1.06285 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 77 components and 1.06285 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.152 mas, bmaj=11.34 mas, bpa=31.61 degrees ! Estimated noise=5789.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00163684 Jy ! Component: 100 - total flux cleaned = -0.00395464 Jy ! Component: 150 - total flux cleaned = -0.00507789 Jy ! Component: 200 - total flux cleaned = -0.00569043 Jy ! Total flux subtracted in 200 components = -0.00569043 Jy ! Clean residual min=-0.120679 max=0.141692 Jy/beam ! Clean residual mean=-0.000039 rms=0.036417 Jy/beam ! Combined flux in latest and established models = 1.05716 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 89 components and 1.05716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.233460Jy sigma=0.001417 ! Fit after self-cal, rms=0.099448Jy sigma=0.000563 wmodel J0016-0015_S_2017_04_28_pus_map.mod ! Writing 89 model components to file: J0016-0015_S_2017_04_28_pus_map.mod wobs J0016-0015_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0016-0015_S_2017_04_28_pus_uvs.fits wwins J0016-0015_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J0016-0015_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.016795 Jy ! Component: 100 - total flux cleaned = 0.0203475 Jy ! Component: 150 - total flux cleaned = 0.0242532 Jy ! Component: 200 - total flux cleaned = 0.0261834 Jy ! Component: 250 - total flux cleaned = 0.0265259 Jy ! Component: 300 - total flux cleaned = 0.0271683 Jy ! Component: 350 - total flux cleaned = 0.0280961 Jy ! Component: 400 - total flux cleaned = 0.028384 Jy ! Component: 450 - total flux cleaned = 0.0286523 Jy ! Component: 500 - total flux cleaned = 0.0291679 Jy ! Component: 550 - total flux cleaned = 0.0294164 Jy ! Component: 600 - total flux cleaned = 0.0298967 Jy ! Component: 650 - total flux cleaned = 0.0303704 Jy ! Component: 700 - total flux cleaned = 0.030835 Jy ! Component: 750 - total flux cleaned = 0.0287676 Jy ! Component: 800 - total flux cleaned = 0.026456 Jy ! Component: 850 - total flux cleaned = 0.0245832 Jy ! Component: 900 - total flux cleaned = 0.0233982 Jy ! Component: 950 - total flux cleaned = 0.0219513 Jy ! Component: 1000 - total flux cleaned = 0.0209631 Jy ! Component: 1050 - total flux cleaned = 0.0202035 Jy ! Component: 1100 - total flux cleaned = 0.0202023 Jy ! Component: 1150 - total flux cleaned = 0.0199363 Jy ! Component: 1200 - total flux cleaned = 0.0199353 Jy ! Component: 1250 - total flux cleaned = 0.01993 Jy ! Component: 1300 - total flux cleaned = 0.0199255 Jy ! Component: 1350 - total flux cleaned = 0.0202289 Jy ! Component: 1400 - total flux cleaned = 0.0205479 Jy ! Component: 1450 - total flux cleaned = 0.0202243 Jy ! Component: 1500 - total flux cleaned = 0.020222 Jy ! Component: 1550 - total flux cleaned = 0.0202254 Jy ! Component: 1600 - total flux cleaned = 0.0198684 Jy ! Component: 1650 - total flux cleaned = 0.0202382 Jy ! Component: 1700 - total flux cleaned = 0.0202437 Jy ! Component: 1750 - total flux cleaned = 0.0198453 Jy ! Component: 1800 - total flux cleaned = 0.0198458 Jy ! Component: 1850 - total flux cleaned = 0.0198379 Jy ! Component: 1900 - total flux cleaned = 0.0193839 Jy ! Component: 1950 - total flux cleaned = 0.0189194 Jy ! Component: 2000 - total flux cleaned = 0.0184434 Jy ! Component: 2050 - total flux cleaned = 0.0179478 Jy ! Component: 2100 - total flux cleaned = 0.0169291 Jy ! Component: 2150 - total flux cleaned = 0.016401 Jy ! Component: 2200 - total flux cleaned = 0.015851 Jy ! Component: 2250 - total flux cleaned = 0.0152829 Jy ! Component: 2300 - total flux cleaned = 0.0146965 Jy ! Component: 2350 - total flux cleaned = 0.0140933 Jy ! Component: 2400 - total flux cleaned = 0.014105 Jy ! Component: 2450 - total flux cleaned = 0.0134548 Jy ! Component: 2500 - total flux cleaned = 0.0134505 Jy ! Component: 2550 - total flux cleaned = 0.0134609 Jy ! Component: 2600 - total flux cleaned = 0.0134623 Jy ! Component: 2650 - total flux cleaned = 0.0127086 Jy ! Component: 2700 - total flux cleaned = 0.0126886 Jy ! Component: 2750 - total flux cleaned = 0.0126839 Jy ! Component: 2800 - total flux cleaned = 0.0135091 Jy ! Component: 2850 - total flux cleaned = 0.0126676 Jy ! Component: 2900 - total flux cleaned = 0.0126683 Jy ! Component: 2950 - total flux cleaned = 0.0126803 Jy ! Component: 3000 - total flux cleaned = 0.0126905 Jy ! Component: 3050 - total flux cleaned = 0.0126954 Jy ! Component: 3100 - total flux cleaned = 0.0116798 Jy ! Component: 3150 - total flux cleaned = 0.0116575 Jy ! Component: 3200 - total flux cleaned = 0.011645 Jy ! Component: 3250 - total flux cleaned = 0.0127821 Jy ! Component: 3300 - total flux cleaned = 0.0116 Jy ! Component: 3350 - total flux cleaned = 0.0116036 Jy ! Component: 3400 - total flux cleaned = 0.0116087 Jy ! Component: 3450 - total flux cleaned = 0.0115943 Jy ! Component: 3500 - total flux cleaned = 0.0102123 Jy ! Component: 3550 - total flux cleaned = 0.0130036 Jy ! Component: 3600 - total flux cleaned = 0.0115586 Jy ! Component: 3650 - total flux cleaned = 0.0115232 Jy ! Component: 3700 - total flux cleaned = 0.0115301 Jy ! Component: 3750 - total flux cleaned = 0.0115519 Jy ! Component: 3800 - total flux cleaned = 0.0098669 Jy ! Component: 3850 - total flux cleaned = 0.0115742 Jy ! Component: 3900 - total flux cleaned = 0.0115764 Jy ! Component: 3950 - total flux cleaned = 0.0115976 Jy ! Component: 4000 - total flux cleaned = 0.0116063 Jy ! Component: 4050 - total flux cleaned = 0.0116178 Jy ! Total flux subtracted in 4096 components = 0.0116383 Jy ! Clean residual min=-0.104748 max=0.124580 Jy/beam ! Clean residual mean=0.000089 rms=0.036146 Jy/beam ! Combined flux in latest and established models = 1.0688 Jy keep ! Adding 95 model components to the UV plane model. ! The established model now contains 184 components and 1.0688 Jy ![Exited script file: muppet] wmap "J0016-0015_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.152 x 11.34 at 31.61 degrees (North through East) ! Clean map min=-0.31374 max=0.34939 Jy/beam ! Writing clean map to FITS file: J0016-0015_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.34939 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0483318 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -41.4995 41.4995 82.9991 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.1449 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.349 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.152 x 11.34 at 31.61 degrees (North through East) ! Clean map min=-0.31374 max=0.34939 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0016-0015_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:12:43 2019