! Started logfile: J0016-0015_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:27:13 2019 obs J0016-0015_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0016-0015_S_2017_03_27_pus_uva.fits ! AN table 1: 8 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J0016-0015 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 1248 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0016-0015_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.742040Jy sigma=0.005768 ! Fit after self-cal, rms=0.523837Jy sigma=0.004180 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.076 mas, bmaj=7.181 mas, bpa=-3.027 degrees ! Estimated noise=3387.88 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.3929 Jy ! Component: 100 - total flux cleaned = 0.488256 Jy ! Total flux subtracted in 100 components = 0.488256 Jy ! Clean residual min=-0.023999 max=0.037313 Jy/beam ! Clean residual mean=-0.000021 rms=0.007392 Jy/beam ! Combined flux in latest and established models = 0.488256 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.488256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.194612Jy sigma=0.001537 ! Fit after self-cal, rms=0.194618Jy sigma=0.001537 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.518 mas, bmaj=7.877 mas, bpa=-2.386 degrees ! Estimated noise=2930.84 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0363467 Jy ! Component: 100 - total flux cleaned = 0.0544192 Jy ! Component: 150 - total flux cleaned = 0.0654402 Jy ! Component: 200 - total flux cleaned = 0.0722977 Jy ! Total flux subtracted in 200 components = 0.0722977 Jy ! Clean residual min=-0.018305 max=0.028031 Jy/beam ! Clean residual mean=-0.000033 rms=0.006498 Jy/beam ! Combined flux in latest and established models = 0.560554 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.560554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187445Jy sigma=0.001490 ! Fit after self-cal, rms=0.187467Jy sigma=0.001490 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.13 HN 0.92 KP 1.07 ! LA 0.93 MK 0.98 NL 0.95 OV 1.05 ! PT 0.93 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.17 HN 0.96 KP 0.94 ! LA 0.93 MK 1.01 NL 1.06 OV 1.07 ! PT 0.89 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.20 HN 0.97 KP 0.96 ! LA 0.92 MK 1.08 NL 1.06 OV 0.98 ! PT 0.92 SC 0.96 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.25 HN 0.95 KP 1.00* ! LA 1.00* MK 1.00* NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.187467Jy sigma=0.001490 ! Fit after self-cal, rms=0.172768Jy sigma=0.001414 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.517 mas, bmaj=7.85 mas, bpa=-2.035 degrees ! Estimated noise=2928.65 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000152534 Jy ! Component: 100 - total flux cleaned = 4.35781e-05 Jy ! Component: 150 - total flux cleaned = -0.000138876 Jy ! Component: 200 - total flux cleaned = -0.000224853 Jy ! Total flux subtracted in 200 components = -0.000224853 Jy ! Clean residual min=-0.013309 max=0.014566 Jy/beam ! Clean residual mean=-0.000027 rms=0.003557 Jy/beam ! Combined flux in latest and established models = 0.560329 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 28 components and 0.560329 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172629Jy sigma=0.001413 ! Fit after self-cal, rms=0.172776Jy sigma=0.001413 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172776Jy sigma=0.001413 ! Fit after self-cal, rms=0.172607Jy sigma=0.001413 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.51 mas, bmaj=7.846 mas, bpa=-2.098 degrees ! Estimated noise=2924.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000212484 Jy ! Component: 100 - total flux cleaned = 0.000292571 Jy ! Component: 150 - total flux cleaned = 0.000291884 Jy ! Component: 200 - total flux cleaned = 0.000222244 Jy ! Total flux subtracted in 200 components = 0.000222244 Jy ! Clean residual min=-0.013106 max=0.014225 Jy/beam ! Clean residual mean=-0.000027 rms=0.003548 Jy/beam ! Combined flux in latest and established models = 0.560551 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 32 components and 0.560551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172523Jy sigma=0.001412 ! Fit after self-cal, rms=0.172530Jy sigma=0.001412 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00031066 Jy ! Component: 100 - total flux cleaned = -0.000309568 Jy ! Component: 150 - total flux cleaned = -0.00030495 Jy ! Component: 200 - total flux cleaned = -0.000247164 Jy ! Total flux subtracted in 200 components = -0.000247164 Jy ! Clean residual min=-0.013035 max=0.014019 Jy/beam ! Clean residual mean=-0.000027 rms=0.003538 Jy/beam ! Combined flux in latest and established models = 0.560304 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.560304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172480Jy sigma=0.001412 ! Fit after self-cal, rms=0.172482Jy sigma=0.001412 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172482Jy sigma=0.001412 ! Fit after self-cal, rms=0.172309Jy sigma=0.001412 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.503 mas, bmaj=7.839 mas, bpa=-2.128 degrees ! Estimated noise=2919.56 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000485597 Jy ! Component: 100 - total flux cleaned = 0.000484908 Jy ! Component: 150 - total flux cleaned = 0.000485805 Jy ! Component: 200 - total flux cleaned = 0.000374928 Jy ! Total flux subtracted in 200 components = 0.000374928 Jy ! Clean residual min=-0.012914 max=0.013906 Jy/beam ! Clean residual mean=-0.000027 rms=0.003515 Jy/beam ! Combined flux in latest and established models = 0.560679 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 38 components and 0.560679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172267Jy sigma=0.001412 ! Fit after self-cal, rms=0.172268Jy sigma=0.001412 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.96014e-05 Jy ! Component: 100 - total flux cleaned = -0.000112199 Jy ! Component: 150 - total flux cleaned = -0.000112221 Jy ! Component: 200 - total flux cleaned = -0.000112577 Jy ! Total flux subtracted in 200 components = -0.000112577 Jy ! Clean residual min=-0.012866 max=0.013858 Jy/beam ! Clean residual mean=-0.000027 rms=0.003508 Jy/beam ! Combined flux in latest and established models = 0.560566 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.560566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172240Jy sigma=0.001411 ! Fit after self-cal, rms=0.172240Jy sigma=0.001411 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172240Jy sigma=0.001411 ! Fit after self-cal, rms=0.172126Jy sigma=0.001411 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.771 mas, bmaj=12.9 mas, bpa=11.34 degrees ! Estimated noise=3509.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312651 Jy ! Component: 100 - total flux cleaned = 0.00333769 Jy ! Component: 150 - total flux cleaned = 0.00346298 Jy ! Component: 200 - total flux cleaned = 0.00363316 Jy ! Total flux subtracted in 200 components = 0.00363316 Jy ! Clean residual min=-0.017525 max=0.018764 Jy/beam ! Clean residual mean=-0.000047 rms=0.005164 Jy/beam ! Combined flux in latest and established models = 0.564199 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 47 components and 0.564199 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172155Jy sigma=0.001411 ! Fit after self-cal, rms=0.172147Jy sigma=0.001411 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000150596 Jy ! Component: 100 - total flux cleaned = 0.000338275 Jy ! Component: 150 - total flux cleaned = 0.000452176 Jy ! Component: 200 - total flux cleaned = 0.000508452 Jy ! Total flux subtracted in 200 components = 0.000508452 Jy ! Clean residual min=-0.017531 max=0.018617 Jy/beam ! Clean residual mean=-0.000047 rms=0.005144 Jy/beam ! Combined flux in latest and established models = 0.564708 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.564708 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172178Jy sigma=0.001411 ! Fit after self-cal, rms=0.172166Jy sigma=0.001411 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=7.834 mas, bpa=-2.139 degrees ! Estimated noise=2916.08 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.498 x 7.834 at -2.139 degrees (North through East) ! Clean map min=-0.012881 max=0.4907 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.06 mas, bmaj=7.138 mas, bpa=-2.79 degrees ! Estimated noise=3358.03 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.387431 Jy ! Component: 100 - total flux cleaned = 0.482511 Jy ! Component: 150 - total flux cleaned = 0.517195 Jy ! Component: 200 - total flux cleaned = 0.534235 Jy ! Total flux subtracted in 200 components = 0.534235 Jy ! Clean residual min=-0.013020 max=0.013089 Jy/beam ! Clean residual mean=-0.000021 rms=0.003657 Jy/beam ! Combined flux in latest and established models = 0.534236 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.534236 Jy ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=7.834 mas, bpa=-2.139 degrees ! Estimated noise=2916.08 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125133 Jy ! Component: 100 - total flux cleaned = 0.0190635 Jy ! Component: 150 - total flux cleaned = 0.022671 Jy ! Component: 200 - total flux cleaned = 0.0246343 Jy ! Total flux subtracted in 200 components = 0.0246343 Jy ! Clean residual min=-0.013388 max=0.014025 Jy/beam ! Clean residual mean=-0.000028 rms=0.003541 Jy/beam ! Combined flux in latest and established models = 0.55887 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 39 components and 0.55887 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.771 mas, bmaj=12.9 mas, bpa=11.34 degrees ! Estimated noise=3509.68 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0033837 Jy ! Component: 100 - total flux cleaned = 0.00364255 Jy ! Component: 150 - total flux cleaned = 0.00391968 Jy ! Component: 200 - total flux cleaned = 0.00404643 Jy ! Total flux subtracted in 200 components = 0.00404643 Jy ! Clean residual min=-0.017753 max=0.018879 Jy/beam ! Clean residual mean=-0.000049 rms=0.005193 Jy/beam ! Combined flux in latest and established models = 0.562916 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000232725 Jy ! Component: 100 - total flux cleaned = 0.000394057 Jy ! Component: 150 - total flux cleaned = 0.000548017 Jy ! Component: 200 - total flux cleaned = 0.000644509 Jy ! Total flux subtracted in 200 components = 0.000644509 Jy ! Clean residual min=-0.017744 max=0.018700 Jy/beam ! Clean residual mean=-0.000048 rms=0.005166 Jy/beam ! Combined flux in latest and established models = 0.563561 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 50 components and 0.563561 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.498 mas, bmaj=7.834 mas, bpa=-2.139 degrees ! Estimated noise=2916.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150653 Jy ! Component: 100 - total flux cleaned = -0.00192929 Jy ! Component: 150 - total flux cleaned = -0.00235748 Jy ! Component: 200 - total flux cleaned = -0.00263927 Jy ! Total flux subtracted in 200 components = -0.00263927 Jy ! Clean residual min=-0.013530 max=0.013805 Jy/beam ! Clean residual mean=-0.000027 rms=0.003507 Jy/beam ! Combined flux in latest and established models = 0.560922 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 60 components and 0.560922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172168Jy sigma=0.001412 ! Fit after self-cal, rms=0.172171Jy sigma=0.001411 wmodel J0016-0015_S_2017_03_27_pus_map.mod ! Writing 60 model components to file: J0016-0015_S_2017_03_27_pus_map.mod wobs J0016-0015_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0016-0015_S_2017_03_27_pus_uvs.fits wwins J0016-0015_S_2017_03_27_pus_map.win ! wwins: Wrote 1 windows to J0016-0015_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00299525 Jy ! Component: 100 - total flux cleaned = 0.0057916 Jy ! Component: 150 - total flux cleaned = 0.00677385 Jy ! Component: 200 - total flux cleaned = 0.00768529 Jy ! Component: 250 - total flux cleaned = 0.00803073 Jy ! Component: 300 - total flux cleaned = 0.00803669 Jy ! Component: 350 - total flux cleaned = 0.00819413 Jy ! Component: 400 - total flux cleaned = 0.00819347 Jy ! Component: 450 - total flux cleaned = 0.00819597 Jy ! Component: 500 - total flux cleaned = 0.00833003 Jy ! Component: 550 - total flux cleaned = 0.00819771 Jy ! Component: 600 - total flux cleaned = 0.00807047 Jy ! Component: 650 - total flux cleaned = 0.00795311 Jy ! Component: 700 - total flux cleaned = 0.00783961 Jy ! Component: 750 - total flux cleaned = 0.00784067 Jy ! Component: 800 - total flux cleaned = 0.0079484 Jy ! Component: 850 - total flux cleaned = 0.00805074 Jy ! Component: 900 - total flux cleaned = 0.00814826 Jy ! Component: 950 - total flux cleaned = 0.00824408 Jy ! Component: 1000 - total flux cleaned = 0.00861998 Jy ! Component: 1050 - total flux cleaned = 0.0088043 Jy ! Component: 1100 - total flux cleaned = 0.00898226 Jy ! Component: 1150 - total flux cleaned = 0.00889618 Jy ! Component: 1200 - total flux cleaned = 0.00889585 Jy ! Component: 1250 - total flux cleaned = 0.00889445 Jy ! Component: 1300 - total flux cleaned = 0.0086526 Jy ! Component: 1350 - total flux cleaned = 0.0084986 Jy ! Component: 1400 - total flux cleaned = 0.0084994 Jy ! Component: 1450 - total flux cleaned = 0.00842587 Jy ! Component: 1500 - total flux cleaned = 0.00842694 Jy ! Component: 1550 - total flux cleaned = 0.00842618 Jy ! Component: 1600 - total flux cleaned = 0.00807288 Jy ! Component: 1650 - total flux cleaned = 0.00807367 Jy ! Component: 1700 - total flux cleaned = 0.00786982 Jy ! Component: 1750 - total flux cleaned = 0.00807167 Jy ! Component: 1800 - total flux cleaned = 0.00826806 Jy ! Component: 1850 - total flux cleaned = 0.00813751 Jy ! Component: 1900 - total flux cleaned = 0.00826534 Jy ! Component: 1950 - total flux cleaned = 0.00807589 Jy ! Component: 2000 - total flux cleaned = 0.00782681 Jy ! Component: 2050 - total flux cleaned = 0.00770452 Jy ! Component: 2100 - total flux cleaned = 0.00764295 Jy ! Component: 2150 - total flux cleaned = 0.00746136 Jy ! Component: 2200 - total flux cleaned = 0.00722217 Jy ! Component: 2250 - total flux cleaned = 0.0071034 Jy ! Component: 2300 - total flux cleaned = 0.00681069 Jy ! Component: 2350 - total flux cleaned = 0.00669499 Jy ! Component: 2400 - total flux cleaned = 0.00652234 Jy ! Component: 2450 - total flux cleaned = 0.0064654 Jy ! Component: 2500 - total flux cleaned = 0.00623814 Jy ! Component: 2550 - total flux cleaned = 0.00606935 Jy ! Component: 2600 - total flux cleaned = 0.00590145 Jy ! Component: 2650 - total flux cleaned = 0.00573471 Jy ! Component: 2700 - total flux cleaned = 0.00567988 Jy ! Component: 2750 - total flux cleaned = 0.00546006 Jy ! Component: 2800 - total flux cleaned = 0.00535086 Jy ! Component: 2850 - total flux cleaned = 0.00524196 Jy ! Component: 2900 - total flux cleaned = 0.00507916 Jy ! Component: 2950 - total flux cleaned = 0.00486243 Jy ! Component: 3000 - total flux cleaned = 0.00475466 Jy ! Component: 3050 - total flux cleaned = 0.00464727 Jy ! Component: 3100 - total flux cleaned = 0.00443318 Jy ! Component: 3150 - total flux cleaned = 0.00432637 Jy ! Component: 3200 - total flux cleaned = 0.00427309 Jy ! Component: 3250 - total flux cleaned = 0.00427328 Jy ! Component: 3300 - total flux cleaned = 0.00416728 Jy ! Component: 3350 - total flux cleaned = 0.0040616 Jy ! Component: 3400 - total flux cleaned = 0.003956 Jy ! Component: 3450 - total flux cleaned = 0.00379813 Jy ! Component: 3500 - total flux cleaned = 0.00379861 Jy ! Component: 3550 - total flux cleaned = 0.00369395 Jy ! Component: 3600 - total flux cleaned = 0.00374649 Jy ! Component: 3650 - total flux cleaned = 0.00379854 Jy ! Component: 3700 - total flux cleaned = 0.0037985 Jy ! Component: 3750 - total flux cleaned = 0.00385079 Jy ! Component: 3800 - total flux cleaned = 0.00385077 Jy ! Component: 3850 - total flux cleaned = 0.00379857 Jy ! Component: 3900 - total flux cleaned = 0.00369505 Jy ! Component: 3950 - total flux cleaned = 0.00379878 Jy ! Component: 4000 - total flux cleaned = 0.00379875 Jy ! Component: 4050 - total flux cleaned = 0.00385072 Jy ! Total flux subtracted in 4096 components = 0.0039026 Jy ! Clean residual min=-0.002797 max=0.003314 Jy/beam ! Clean residual mean=-0.000006 rms=0.000894 Jy/beam ! Combined flux in latest and established models = 0.564824 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 331 components and 0.564825 Jy ![Exited script file: muppet] wmap "J0016-0015_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.498 x 7.834 at -2.139 degrees (North through East) ! Clean map min=-0.0076965 max=0.49226 Jy/beam ! Writing clean map to FITS file: J0016-0015_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.492259 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000894917 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.545394 0.545394 1.09079 2.18158 4.36315 8.72631 17.4526 34.9052 69.8104 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.492 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.498 x 7.834 at -2.139 degrees (North through East) ! Clean map min=-0.0076965 max=0.49226 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0016-0015_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:27:19 2019