! Started logfile: J0013+4051_S_2017_05_01_pus_uvs.log on Wed May 1 18:21:17 2019 obs J0013+4051_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0013+4051_S_2017_05_01_pus_uva.fits ! AN table 1: 39 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.711111 visibilities/baseline/integration-bin. ! Found source: J0013+4051 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 4992 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0013+4051_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 64 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 205 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.627956Jy sigma=0.026803 ! Fit after self-cal, rms=0.624053Jy sigma=0.026797 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.617 mas, bmaj=6.404 mas, bpa=5.472 degrees ! Estimated noise=1272.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.231691 Jy ! Component: 100 - total flux cleaned = 0.287088 Jy ! Total flux subtracted in 100 components = 0.287088 Jy ! Clean residual min=-0.048129 max=0.065291 Jy/beam ! Clean residual mean=0.000028 rms=0.016662 Jy/beam ! Combined flux in latest and established models = 0.287088 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.287088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150997Jy sigma=0.007014 ! Fit after self-cal, rms=0.150982Jy sigma=0.007014 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.319 mas, bmaj=7.422 mas, bpa=0.1374 degrees ! Estimated noise=953.994 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0491476 Jy ! Component: 100 - total flux cleaned = 0.0689679 Jy ! Component: 150 - total flux cleaned = 0.0737733 Jy ! Component: 200 - total flux cleaned = 0.0768316 Jy ! Total flux subtracted in 200 components = 0.0768316 Jy ! Clean residual min=-0.046617 max=0.059939 Jy/beam ! Clean residual mean=-0.000021 rms=0.016447 Jy/beam ! Combined flux in latest and established models = 0.363919 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 36 components and 0.363919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142675Jy sigma=0.006500 ! Fit after self-cal, rms=0.142509Jy sigma=0.006500 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.85 FD 0.89 HN 0.71 KP 0.90 ! LA 0.91 MK 1.03 NL 0.82 OV 0.94 ! PT 0.93 SC 0.84 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.93 HN 0.77 KP 0.86 ! LA 0.89 MK 0.97 NL 0.85 OV 0.98 ! PT 0.90 SC 32.68 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 0.93 HN 0.75 KP 0.88 ! LA 0.93 MK 1.02 NL 0.85 OV 0.87 ! PT 0.88 SC 0.87 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.97 HN 0.64 KP 1.00* ! LA 0.94 MK 1.30 NL 1.00* OV 1.00* ! PT 0.93 SC 1.00* ! ! ! Fit before self-cal, rms=0.142509Jy sigma=0.006500 ! Fit after self-cal, rms=2.037944Jy sigma=0.001054 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.486 mas, bmaj=7.424 mas, bpa=5.729 degrees ! Estimated noise=1040.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0108545 Jy ! Component: 100 - total flux cleaned = -0.0148213 Jy ! Component: 150 - total flux cleaned = -0.0183681 Jy ! Component: 200 - total flux cleaned = -0.0198119 Jy ! Total flux subtracted in 200 components = -0.0198119 Jy ! Clean residual min=-0.009565 max=0.010901 Jy/beam ! Clean residual mean=0.000006 rms=0.002448 Jy/beam ! Combined flux in latest and established models = 0.344107 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.344107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.032576Jy sigma=0.000970 ! Fit after self-cal, rms=2.032733Jy sigma=0.000958 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=2.032733Jy sigma=0.000958 ! Fit after self-cal, rms=1.485571Jy sigma=0.000820 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.469 mas, bmaj=7.36 mas, bpa=7.791 degrees ! Estimated noise=1040.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00682649 Jy ! Component: 100 - total flux cleaned = -0.00860675 Jy ! Component: 150 - total flux cleaned = -0.00969088 Jy ! Component: 200 - total flux cleaned = -0.0101129 Jy ! Total flux subtracted in 200 components = -0.0101129 Jy ! Clean residual min=-0.006181 max=0.005968 Jy/beam ! Clean residual mean=-0.000010 rms=0.001667 Jy/beam ! Combined flux in latest and established models = 0.333995 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 52 components and 0.333995 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.482991Jy sigma=0.000805 ! Fit after self-cal, rms=1.482999Jy sigma=0.000805 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000351109 Jy ! Component: 100 - total flux cleaned = -0.00079863 Jy ! Component: 150 - total flux cleaned = -0.00105682 Jy ! Component: 200 - total flux cleaned = -0.00139389 Jy ! Total flux subtracted in 200 components = -0.00139389 Jy ! Clean residual min=-0.006416 max=0.005765 Jy/beam ! Clean residual mean=-0.000011 rms=0.001640 Jy/beam ! Combined flux in latest and established models = 0.332601 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 57 components and 0.332601 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.481926Jy sigma=0.000807 ! Fit after self-cal, rms=1.481924Jy sigma=0.000807 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.481924Jy sigma=0.000807 ! Fit after self-cal, rms=0.074819Jy sigma=0.000673 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.418 mas, bmaj=7.441 mas, bpa=8.935 degrees ! Estimated noise=1039.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00133124 Jy ! Component: 100 - total flux cleaned = -0.00147596 Jy ! Component: 150 - total flux cleaned = -0.00147729 Jy ! Component: 200 - total flux cleaned = -0.00138866 Jy ! Total flux subtracted in 200 components = -0.00138866 Jy ! Clean residual min=-0.003292 max=0.003543 Jy/beam ! Clean residual mean=-0.000008 rms=0.000867 Jy/beam ! Combined flux in latest and established models = 0.331212 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 66 components and 0.331212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074301Jy sigma=0.000668 ! Fit after self-cal, rms=0.074244Jy sigma=0.000667 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121978 Jy ! Component: 100 - total flux cleaned = 0.000176199 Jy ! Component: 150 - total flux cleaned = 0.000222403 Jy ! Component: 200 - total flux cleaned = 0.000226713 Jy ! Total flux subtracted in 200 components = 0.000226713 Jy ! Clean residual min=-0.003194 max=0.003487 Jy/beam ! Clean residual mean=-0.000008 rms=0.000852 Jy/beam ! Combined flux in latest and established models = 0.331439 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 0.331439 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074155Jy sigma=0.000667 ! Fit after self-cal, rms=0.074157Jy sigma=0.000667 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074157Jy sigma=0.000667 ! Fit after self-cal, rms=0.073708Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.366 mas, bmaj=9.698 mas, bpa=5.425 degrees ! Estimated noise=1151.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000570391 Jy ! Component: 100 - total flux cleaned = -0.000687602 Jy ! Component: 150 - total flux cleaned = -0.000685588 Jy ! Component: 200 - total flux cleaned = -0.000684545 Jy ! Total flux subtracted in 200 components = -0.000684545 Jy ! Clean residual min=-0.002859 max=0.002933 Jy/beam ! Clean residual mean=-0.000010 rms=0.000805 Jy/beam ! Combined flux in latest and established models = 0.330754 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 76 components and 0.330754 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073605Jy sigma=0.000663 ! Fit after self-cal, rms=0.073602Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.7952e-05 Jy ! Component: 100 - total flux cleaned = -2.7928e-07 Jy ! Component: 150 - total flux cleaned = -1.14261e-06 Jy ! Component: 200 - total flux cleaned = -9.84073e-07 Jy ! Total flux subtracted in 200 components = -9.84073e-07 Jy ! Clean residual min=-0.002743 max=0.002892 Jy/beam ! Clean residual mean=-0.000010 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.330753 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 77 components and 0.330753 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073566Jy sigma=0.000662 ! Fit after self-cal, rms=0.073568Jy sigma=0.000662 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.408 mas, bmaj=7.472 mas, bpa=9.36 degrees ! Estimated noise=1039.57 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.408 x 7.472 at 9.36 degrees (North through East) ! Clean map min=-0.0027352 max=0.32166 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.558 mas, bmaj=6.308 mas, bpa=10.95 degrees ! Estimated noise=1368.37 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.249022 Jy ! Component: 100 - total flux cleaned = 0.303427 Jy ! Component: 150 - total flux cleaned = 0.318085 Jy ! Component: 200 - total flux cleaned = 0.325327 Jy ! Total flux subtracted in 200 components = 0.325327 Jy ! Clean residual min=-0.003921 max=0.004101 Jy/beam ! Clean residual mean=-0.000000 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.325327 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.325327 Jy ! Inverting map and beam ! Estimated beam: bmin=4.408 mas, bmaj=7.472 mas, bpa=9.36 degrees ! Estimated noise=1039.57 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00476263 Jy ! Component: 100 - total flux cleaned = 0.00574799 Jy ! Component: 150 - total flux cleaned = 0.00604909 Jy ! Component: 200 - total flux cleaned = 0.00629678 Jy ! Total flux subtracted in 200 components = 0.00629678 Jy ! Clean residual min=-0.002862 max=0.003225 Jy/beam ! Clean residual mean=-0.000005 rms=0.000759 Jy/beam ! Combined flux in latest and established models = 0.331624 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 44 components and 0.331624 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.366 mas, bmaj=9.698 mas, bpa=5.425 degrees ! Estimated noise=1151.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848255 Jy ! Component: 100 - total flux cleaned = 0.000842131 Jy ! Component: 150 - total flux cleaned = 0.000840912 Jy ! Component: 200 - total flux cleaned = 0.000840525 Jy ! Total flux subtracted in 200 components = 0.000840525 Jy ! Clean residual min=-0.002883 max=0.002956 Jy/beam ! Clean residual mean=-0.000009 rms=0.000771 Jy/beam ! Combined flux in latest and established models = 0.332465 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.69057e-05 Jy ! Component: 100 - total flux cleaned = -9.94861e-05 Jy ! Component: 150 - total flux cleaned = -0.000121854 Jy ! Component: 200 - total flux cleaned = -0.000163657 Jy ! Total flux subtracted in 200 components = -0.000163657 Jy ! Clean residual min=-0.002792 max=0.002972 Jy/beam ! Clean residual mean=-0.000009 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.332301 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 78 components and 0.332301 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.408 mas, bmaj=7.472 mas, bpa=9.36 degrees ! Estimated noise=1039.57 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.52839e-05 Jy ! Component: 100 - total flux cleaned = 3.43399e-05 Jy ! Component: 150 - total flux cleaned = 3.63589e-05 Jy ! Component: 200 - total flux cleaned = 8.27947e-05 Jy ! Total flux subtracted in 200 components = 8.27947e-05 Jy ! Clean residual min=-0.002805 max=0.003159 Jy/beam ! Clean residual mean=-0.000005 rms=0.000726 Jy/beam ! Combined flux in latest and established models = 0.332384 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 93 components and 0.332384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073474Jy sigma=0.000661 ! Fit after self-cal, rms=0.073444Jy sigma=0.000661 wmodel J0013+4051_S_2017_05_01_pus_map.mod ! Writing 93 model components to file: J0013+4051_S_2017_05_01_pus_map.mod wobs J0013+4051_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0013+4051_S_2017_05_01_pus_uvs.fits wwins J0013+4051_S_2017_05_01_pus_map.win ! wwins: Wrote 2 windows to J0013+4051_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000884334 Jy ! Component: 100 - total flux cleaned = 0.00123424 Jy ! Component: 150 - total flux cleaned = 0.00175633 Jy ! Component: 200 - total flux cleaned = 0.00212007 Jy ! Component: 250 - total flux cleaned = 0.00247011 Jy ! Component: 300 - total flux cleaned = 0.00263948 Jy ! Component: 350 - total flux cleaned = 0.00280492 Jy ! Component: 400 - total flux cleaned = 0.00292546 Jy ! Component: 450 - total flux cleaned = 0.00300482 Jy ! Component: 500 - total flux cleaned = 0.0030819 Jy ! Component: 550 - total flux cleaned = 0.00311966 Jy ! Component: 600 - total flux cleaned = 0.00304689 Jy ! Component: 650 - total flux cleaned = 0.00315455 Jy ! Component: 700 - total flux cleaned = 0.00326008 Jy ! Component: 750 - total flux cleaned = 0.00343365 Jy ! Component: 800 - total flux cleaned = 0.00360377 Jy ! Component: 850 - total flux cleaned = 0.003604 Jy ! Component: 900 - total flux cleaned = 0.00386938 Jy ! Component: 950 - total flux cleaned = 0.00400035 Jy ! Component: 1000 - total flux cleaned = 0.00419409 Jy ! Component: 1050 - total flux cleaned = 0.00425725 Jy ! Component: 1100 - total flux cleaned = 0.0043508 Jy ! Component: 1150 - total flux cleaned = 0.00444347 Jy ! Component: 1200 - total flux cleaned = 0.00447388 Jy ! Component: 1250 - total flux cleaned = 0.0045041 Jy ! Component: 1300 - total flux cleaned = 0.004534 Jy ! Component: 1350 - total flux cleaned = 0.0045348 Jy ! Component: 1400 - total flux cleaned = 0.00468248 Jy ! Component: 1450 - total flux cleaned = 0.00474064 Jy ! Component: 1500 - total flux cleaned = 0.00468303 Jy ! Component: 1550 - total flux cleaned = 0.00476907 Jy ! Component: 1600 - total flux cleaned = 0.00476856 Jy ! Component: 1650 - total flux cleaned = 0.0046559 Jy ! Component: 1700 - total flux cleaned = 0.0046839 Jy ! Component: 1750 - total flux cleaned = 0.0046842 Jy ! Component: 1800 - total flux cleaned = 0.00460177 Jy ! Component: 1850 - total flux cleaned = 0.00468361 Jy ! Component: 1900 - total flux cleaned = 0.00465619 Jy ! Component: 1950 - total flux cleaned = 0.00473723 Jy ! Component: 2000 - total flux cleaned = 0.00471061 Jy ! Component: 2050 - total flux cleaned = 0.00478976 Jy ! Component: 2100 - total flux cleaned = 0.0047635 Jy ! Component: 2150 - total flux cleaned = 0.00481567 Jy ! Component: 2200 - total flux cleaned = 0.00481557 Jy ! Component: 2250 - total flux cleaned = 0.00484119 Jy ! Component: 2300 - total flux cleaned = 0.00476529 Jy ! Component: 2350 - total flux cleaned = 0.00484132 Jy ! Component: 2400 - total flux cleaned = 0.00484102 Jy ! Component: 2450 - total flux cleaned = 0.00484118 Jy ! Component: 2500 - total flux cleaned = 0.00481643 Jy ! Component: 2550 - total flux cleaned = 0.00484097 Jy ! Component: 2600 - total flux cleaned = 0.00481636 Jy ! Component: 2650 - total flux cleaned = 0.00479202 Jy ! Component: 2700 - total flux cleaned = 0.00474417 Jy ! Component: 2750 - total flux cleaned = 0.00472044 Jy ! Component: 2800 - total flux cleaned = 0.00467327 Jy ! Component: 2850 - total flux cleaned = 0.00472035 Jy ! Component: 2900 - total flux cleaned = 0.00462689 Jy ! Component: 2950 - total flux cleaned = 0.00455721 Jy ! Component: 3000 - total flux cleaned = 0.00453444 Jy ! Component: 3050 - total flux cleaned = 0.00453465 Jy ! Component: 3100 - total flux cleaned = 0.00442084 Jy ! Component: 3150 - total flux cleaned = 0.00442073 Jy ! Component: 3200 - total flux cleaned = 0.00444302 Jy ! Component: 3250 - total flux cleaned = 0.0043762 Jy ! Component: 3300 - total flux cleaned = 0.00442044 Jy ! Component: 3350 - total flux cleaned = 0.00437627 Jy ! Component: 3400 - total flux cleaned = 0.00433244 Jy ! Component: 3450 - total flux cleaned = 0.00433235 Jy ! Component: 3500 - total flux cleaned = 0.00422406 Jy ! Component: 3550 - total flux cleaned = 0.00426726 Jy ! Component: 3600 - total flux cleaned = 0.00416011 Jy ! Component: 3650 - total flux cleaned = 0.00424574 Jy ! Component: 3700 - total flux cleaned = 0.00416093 Jy ! Component: 3750 - total flux cleaned = 0.00418207 Jy ! Component: 3800 - total flux cleaned = 0.00420303 Jy ! Component: 3850 - total flux cleaned = 0.00418203 Jy ! Component: 3900 - total flux cleaned = 0.00409909 Jy ! Component: 3950 - total flux cleaned = 0.00407842 Jy ! Component: 4000 - total flux cleaned = 0.00414011 Jy ! Component: 4050 - total flux cleaned = 0.00413995 Jy ! Total flux subtracted in 4096 components = 0.00424136 Jy ! Clean residual min=-0.001238 max=0.001152 Jy/beam ! Clean residual mean=0.000001 rms=0.000380 Jy/beam ! Combined flux in latest and established models = 0.336625 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 394 components and 0.336625 Jy ![Exited script file: muppet] wmap "J0013+4051_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.408 x 7.472 at 9.36 degrees (North through East) ! Clean map min=-0.0024683 max=0.32156 Jy/beam ! Writing clean map to FITS file: J0013+4051_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.321564 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000377571 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.352251 0.352251 0.704502 1.409 2.81801 5.63602 11.272 22.5441 45.0882 90.1763 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.321 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.408 x 7.472 at 9.36 degrees (North through East) ! Clean map min=-0.0024683 max=0.32156 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0013+4051_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:21:24 2019