! Started logfile: J0013+4051_S_2017_01_21_pus_uvs.log on Sun May 5 15:42:47 2019 obs J0013+4051_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0013+4051_S_2017_01_21_pus_uva.fits ! AN table 1: 10 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.144444 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0013+4051 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 208 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0013+4051_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 55 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 90 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.715894Jy sigma=0.005039 ! Fit after self-cal, rms=0.704929Jy sigma=0.004987 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.933 mas, bmaj=10.26 mas, bpa=-7.973 degrees ! Estimated noise=10103.2 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.234222 Jy ! Component: 100 - total flux cleaned = 0.281624 Jy ! Total flux subtracted in 100 components = 0.281624 Jy ! Clean residual min=-0.016310 max=0.016552 Jy/beam ! Clean residual mean=-0.000003 rms=0.005801 Jy/beam ! Combined flux in latest and established models = 0.281624 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.281624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093146Jy sigma=0.000627 ! Fit after self-cal, rms=0.093015Jy sigma=0.000626 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.243 mas, bmaj=9.74 mas, bpa=-2.402 degrees ! Estimated noise=8166.89 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0102888 Jy ! Component: 100 - total flux cleaned = 0.0142805 Jy ! Component: 150 - total flux cleaned = 0.0154597 Jy ! Component: 200 - total flux cleaned = 0.0183701 Jy ! Total flux subtracted in 200 components = 0.0183701 Jy ! Clean residual min=-0.009473 max=0.009784 Jy/beam ! Clean residual mean=0.000003 rms=0.002745 Jy/beam ! Combined flux in latest and established models = 0.299994 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 53 components and 0.299994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086158Jy sigma=0.000579 ! Fit after self-cal, rms=0.085741Jy sigma=0.000576 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00* HN 0.94 LA 1.00* ! MK 1.00* NL 0.92 OV 1.00* PT 1.00* ! SC 1.02 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.00* HN 1.11 LA 1.00* ! MK 1.00* NL 1.10 OV 1.00* PT 1.00* ! SC 0.91 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 0.95 LA 1.00* ! MK 1.00* NL 1.02 OV 1.00* PT 1.00* ! SC 1.05 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! MK 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* ! ! ! Fit before self-cal, rms=0.085741Jy sigma=0.000576 ! Fit after self-cal, rms=0.081206Jy sigma=0.000539 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.309 mas, bmaj=9.481 mas, bpa=-2.679 degrees ! Estimated noise=8441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000930364 Jy ! Component: 100 - total flux cleaned = 0.00118143 Jy ! Component: 150 - total flux cleaned = 0.00316934 Jy ! Component: 200 - total flux cleaned = 0.00391436 Jy ! Total flux subtracted in 200 components = 0.00391436 Jy ! Clean residual min=-0.003034 max=0.003059 Jy/beam ! Clean residual mean=-0.000001 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.303909 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 77 components and 0.303909 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080085Jy sigma=0.000531 ! Fit after self-cal, rms=0.080072Jy sigma=0.000531 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080072Jy sigma=0.000531 ! Fit after self-cal, rms=0.080124Jy sigma=0.000530 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.315 mas, bmaj=9.486 mas, bpa=-2.654 degrees ! Estimated noise=8429.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.38843e-05 Jy ! Component: 100 - total flux cleaned = 0.000293976 Jy ! Component: 150 - total flux cleaned = 0.000194768 Jy ! Component: 200 - total flux cleaned = 0.000105216 Jy ! Total flux subtracted in 200 components = 0.000105216 Jy ! Clean residual min=-0.001432 max=0.001428 Jy/beam ! Clean residual mean=-0.000000 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.304014 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 102 components and 0.304014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079831Jy sigma=0.000529 ! Fit after self-cal, rms=0.079817Jy sigma=0.000529 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000694777 Jy ! Component: 100 - total flux cleaned = -0.0014388 Jy ! Component: 150 - total flux cleaned = -0.00235907 Jy ! Component: 200 - total flux cleaned = -0.00330648 Jy ! Total flux subtracted in 200 components = -0.00330648 Jy ! Clean residual min=-0.001462 max=0.001439 Jy/beam ! Clean residual mean=-0.000000 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.300707 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 122 components and 0.300707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079678Jy sigma=0.000528 ! Fit after self-cal, rms=0.079680Jy sigma=0.000528 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079680Jy sigma=0.000528 ! Fit after self-cal, rms=0.079610Jy sigma=0.000528 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.314 mas, bmaj=9.481 mas, bpa=-2.662 degrees ! Estimated noise=8424.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00117263 Jy ! Component: 100 - total flux cleaned = 0.00110225 Jy ! Component: 150 - total flux cleaned = 0.000820418 Jy ! Component: 200 - total flux cleaned = 0.000168213 Jy ! Total flux subtracted in 200 components = 0.000168213 Jy ! Clean residual min=-0.001234 max=0.001236 Jy/beam ! Clean residual mean=-0.000000 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.300876 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 151 components and 0.300876 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079492Jy sigma=0.000527 ! Fit after self-cal, rms=0.079490Jy sigma=0.000527 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00114112 Jy ! Component: 100 - total flux cleaned = 0.00177767 Jy ! Component: 150 - total flux cleaned = 0.00227984 Jy ! Component: 200 - total flux cleaned = 0.00284816 Jy ! Total flux subtracted in 200 components = 0.00284816 Jy ! Clean residual min=-0.001062 max=0.001079 Jy/beam ! Clean residual mean=-0.000000 rms=0.000315 Jy/beam ! Combined flux in latest and established models = 0.303724 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 176 components and 0.303724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079400Jy sigma=0.000527 ! Fit after self-cal, rms=0.079399Jy sigma=0.000527 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079399Jy sigma=0.000527 ! Fit after self-cal, rms=0.079228Jy sigma=0.000526 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.73 mas, bmaj=9.286 mas, bpa=-1.754 degrees ! Estimated noise=8948.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000185525 Jy ! Component: 100 - total flux cleaned = -0.00015931 Jy ! Component: 150 - total flux cleaned = -0.000424046 Jy ! Component: 200 - total flux cleaned = -0.000656894 Jy ! Total flux subtracted in 200 components = -0.000656894 Jy ! Clean residual min=-0.000802 max=0.000811 Jy/beam ! Clean residual mean=-0.000000 rms=0.000237 Jy/beam ! Combined flux in latest and established models = 0.303067 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 198 components and 0.303067 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079174Jy sigma=0.000526 ! Fit after self-cal, rms=0.079170Jy sigma=0.000526 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000380751 Jy ! Component: 100 - total flux cleaned = 0.00030022 Jy ! Component: 150 - total flux cleaned = 0.000257814 Jy ! Component: 200 - total flux cleaned = 0.000119663 Jy ! Total flux subtracted in 200 components = 0.000119663 Jy ! Clean residual min=-0.000774 max=0.000793 Jy/beam ! Clean residual mean=-0.000000 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.303187 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 216 components and 0.303187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079131Jy sigma=0.000526 ! Fit after self-cal, rms=0.079125Jy sigma=0.000526 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.313 mas, bmaj=9.484 mas, bpa=-2.667 degrees ! Estimated noise=8408.23 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.313 x 9.484 at -2.667 degrees (North through East) ! Clean map min=-0.01408 max=0.26426 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.944 mas, bmaj=10.23 mas, bpa=-7.955 degrees ! Estimated noise=11057.6 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.236123 Jy ! Component: 100 - total flux cleaned = 0.289505 Jy ! Component: 150 - total flux cleaned = 0.296773 Jy ! Component: 200 - total flux cleaned = 0.292716 Jy ! Total flux subtracted in 200 components = 0.292716 Jy ! Clean residual min=-0.008810 max=0.008693 Jy/beam ! Clean residual mean=-0.000001 rms=0.002913 Jy/beam ! Combined flux in latest and established models = 0.292716 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.292716 Jy ! Inverting map and beam ! Estimated beam: bmin=4.313 mas, bmaj=9.484 mas, bpa=-2.667 degrees ! Estimated noise=8408.23 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000546372 Jy ! Component: 100 - total flux cleaned = 0.00248937 Jy ! Component: 150 - total flux cleaned = 0.00571757 Jy ! Component: 200 - total flux cleaned = 0.00823941 Jy ! Total flux subtracted in 200 components = 0.00823941 Jy ! Clean residual min=-0.006193 max=0.006186 Jy/beam ! Clean residual mean=0.000001 rms=0.001796 Jy/beam ! Combined flux in latest and established models = 0.300955 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 67 components and 0.300955 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.73 mas, bmaj=9.286 mas, bpa=-1.754 degrees ! Estimated noise=8948.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000637523 Jy ! Component: 100 - total flux cleaned = 0.00189532 Jy ! Component: 150 - total flux cleaned = 0.00219371 Jy ! Component: 200 - total flux cleaned = 0.00234711 Jy ! Total flux subtracted in 200 components = 0.00234711 Jy ! Clean residual min=-0.002778 max=0.002795 Jy/beam ! Clean residual mean=0.000001 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 0.303302 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.69326e-06 Jy ! Component: 100 - total flux cleaned = -0.000400921 Jy ! Component: 150 - total flux cleaned = -0.000404203 Jy ! Component: 200 - total flux cleaned = -0.000669941 Jy ! Total flux subtracted in 200 components = -0.000669941 Jy ! Clean residual min=-0.004744 max=0.004692 Jy/beam ! Clean residual mean=0.000003 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.302632 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 117 components and 0.302632 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.313 mas, bmaj=9.484 mas, bpa=-2.667 degrees ! Estimated noise=8408.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222336 Jy ! Component: 100 - total flux cleaned = 0.00209895 Jy ! Component: 150 - total flux cleaned = 0.00107612 Jy ! Component: 200 - total flux cleaned = -0.000238712 Jy ! Total flux subtracted in 200 components = -0.000238712 Jy ! Clean residual min=-0.002232 max=0.002203 Jy/beam ! Clean residual mean=0.000000 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.302394 Jy selfcal ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 165 components and 0.302394 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079499Jy sigma=0.000528 ! Fit after self-cal, rms=0.079387Jy sigma=0.000527 wmodel J0013+4051_S_2017_01_21_pus_map.mod ! Writing 165 model components to file: J0013+4051_S_2017_01_21_pus_map.mod wobs J0013+4051_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0013+4051_S_2017_01_21_pus_uvs.fits wwins J0013+4051_S_2017_01_21_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0013+4051_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.313 x 9.484 at -2.667 degrees (North through East) ! Clean map min=-0.010264 max=0.23524 Jy/beam ! Writing clean map to FITS file: J0013+4051_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.235238 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000588614 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.750661 0.750661 1.50132 3.00264 6.00528 12.0106 24.0211 48.0423 96.0846 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0017 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.235 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.313 x 9.484 at -2.667 degrees (North through East) ! Clean map min=-0.010264 max=0.23524 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0013+4051_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:42:50 2019