! Started logfile: J0012+4704_S_2017_03_27_pus_uvs.log on Sun Apr 28 14:26:45 2019 obs J0012+4704_S_2017_03_27_pus_uva.fits ! Reading UV FITS file: J0012+4704_S_2017_03_27_pus_uva.fits ! AN table 1: 114 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.895322 visibilities/baseline/integration-bin. ! Found source: J0012+4704 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1684 lines of history. ! ! Reading 18372 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0012+4704_S_2017_03_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 494 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.910439Jy sigma=0.008497 ! Fit after self-cal, rms=0.901929Jy sigma=0.008429 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.974 mas, bmaj=4.638 mas, bpa=-14.57 degrees ! Estimated noise=1054.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0778263 Jy ! Component: 100 - total flux cleaned = 0.095007 Jy ! Total flux subtracted in 100 components = 0.095007 Jy ! Clean residual min=-0.003709 max=0.005608 Jy/beam ! Clean residual mean=-0.000010 rms=0.000991 Jy/beam ! Combined flux in latest and established models = 0.095007 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.095007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077851Jy sigma=0.000664 ! Fit after self-cal, rms=0.077845Jy sigma=0.000664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=5.537 mas, bpa=-12.58 degrees ! Estimated noise=626.811 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00605253 Jy ! Component: 100 - total flux cleaned = 0.00893774 Jy ! Component: 150 - total flux cleaned = 0.0105413 Jy ! Component: 200 - total flux cleaned = 0.0114601 Jy ! Total flux subtracted in 200 components = 0.0114601 Jy ! Clean residual min=-0.002432 max=0.002864 Jy/beam ! Clean residual mean=-0.000003 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.106467 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 32 components and 0.106467 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077316Jy sigma=0.000661 ! Fit after self-cal, rms=0.077320Jy sigma=0.000660 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.12 HN 0.96 KP 1.02 ! LA 0.96 MK 1.02 NL 0.97 OV 1.01 ! PT 0.97 SC 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.17 HN 0.99 KP 1.00 ! LA 0.95 MK 0.99 NL 1.02 OV 1.05 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.15 HN 0.98 KP 0.96 ! LA 0.97 MK 1.02 NL 1.01 OV 0.94 ! PT 0.95 SC 0.99 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.27 HN 0.97 KP 1.00* ! LA 1.16 MK 1.22 NL 1.00* OV 1.21 ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.077320Jy sigma=0.000660 ! Fit after self-cal, rms=0.080298Jy sigma=0.000654 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.727 mas, bmaj=5.52 mas, bpa=-12.34 degrees ! Estimated noise=631.298 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011509 Jy ! Component: 100 - total flux cleaned = 0.00156261 Jy ! Component: 150 - total flux cleaned = 0.00159223 Jy ! Component: 200 - total flux cleaned = 0.00160474 Jy ! Total flux subtracted in 200 components = 0.00160474 Jy ! Clean residual min=-0.002173 max=0.002236 Jy/beam ! Clean residual mean=-0.000004 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.108072 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 36 components and 0.108072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080262Jy sigma=0.000654 ! Fit after self-cal, rms=0.080331Jy sigma=0.000654 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080331Jy sigma=0.000654 ! Fit after self-cal, rms=0.077996Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.725 mas, bmaj=5.524 mas, bpa=-12.37 degrees ! Estimated noise=632.291 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000351217 Jy ! Component: 100 - total flux cleaned = 0.000361293 Jy ! Component: 150 - total flux cleaned = 0.000370254 Jy ! Component: 200 - total flux cleaned = 0.000378853 Jy ! Total flux subtracted in 200 components = 0.000378853 Jy ! Clean residual min=-0.001861 max=0.001587 Jy/beam ! Clean residual mean=-0.000001 rms=0.000386 Jy/beam ! Combined flux in latest and established models = 0.108451 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 46 components and 0.108451 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077990Jy sigma=0.000650 ! Fit after self-cal, rms=0.077972Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.02132e-05 Jy ! Component: 100 - total flux cleaned = 1.19111e-06 Jy ! Component: 150 - total flux cleaned = 1.01572e-06 Jy ! Component: 200 - total flux cleaned = 1.11712e-06 Jy ! Total flux subtracted in 200 components = 1.11712e-06 Jy ! Clean residual min=-0.001835 max=0.001576 Jy/beam ! Clean residual mean=-0.000001 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.108452 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.108452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077970Jy sigma=0.000650 ! Fit after self-cal, rms=0.077970Jy sigma=0.000650 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077970Jy sigma=0.000650 ! Fit after self-cal, rms=0.078012Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.724 mas, bmaj=5.515 mas, bpa=-12.47 degrees ! Estimated noise=632.879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000240233 Jy ! Component: 100 - total flux cleaned = 0.000248542 Jy ! Component: 150 - total flux cleaned = 0.000264667 Jy ! Component: 200 - total flux cleaned = 0.000278751 Jy ! Total flux subtracted in 200 components = 0.000278751 Jy ! Clean residual min=-0.001840 max=0.001563 Jy/beam ! Clean residual mean=-0.000002 rms=0.000384 Jy/beam ! Combined flux in latest and established models = 0.108731 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 53 components and 0.108731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078009Jy sigma=0.000649 ! Fit after self-cal, rms=0.078008Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.83365e-06 Jy ! Component: 100 - total flux cleaned = -1.34742e-05 Jy ! Component: 150 - total flux cleaned = -1.33189e-05 Jy ! Component: 200 - total flux cleaned = -1.33375e-05 Jy ! Total flux subtracted in 200 components = -1.33375e-05 Jy ! Clean residual min=-0.001825 max=0.001558 Jy/beam ! Clean residual mean=-0.000001 rms=0.000383 Jy/beam ! Combined flux in latest and established models = 0.108717 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.108717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078006Jy sigma=0.000649 ! Fit after self-cal, rms=0.078006Jy sigma=0.000649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078006Jy sigma=0.000649 ! Fit after self-cal, rms=0.078062Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.291 mas, bmaj=8.926 mas, bpa=-13.78 degrees ! Estimated noise=776.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.14759e-05 Jy ! Component: 100 - total flux cleaned = 6.42885e-05 Jy ! Component: 150 - total flux cleaned = 6.94147e-05 Jy ! Component: 200 - total flux cleaned = 7.28709e-05 Jy ! Total flux subtracted in 200 components = 7.28709e-05 Jy ! Clean residual min=-0.001814 max=0.002094 Jy/beam ! Clean residual mean=-0.000003 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.10879 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.10879 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078062Jy sigma=0.000649 ! Fit after self-cal, rms=0.078062Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (91.5, 60.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163999 Jy ! Component: 100 - total flux cleaned = 0.00209882 Jy ! Component: 150 - total flux cleaned = 0.00236265 Jy ! Component: 200 - total flux cleaned = 0.00255957 Jy ! Total flux subtracted in 200 components = 0.00255957 Jy ! Clean residual min=-0.001595 max=0.001416 Jy/beam ! Clean residual mean=-0.000003 rms=0.000404 Jy/beam ! Combined flux in latest and established models = 0.11135 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 97 components and 0.11135 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078028Jy sigma=0.000649 ! Fit after self-cal, rms=0.078021Jy sigma=0.000649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=5.506 mas, bpa=-12.55 degrees ! Estimated noise=633.431 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.723 x 5.506 at -12.55 degrees (North through East) ! Clean map min=-0.0016858 max=0.1005 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.971 mas, bmaj=4.623 mas, bpa=-14.4 degrees ! Estimated noise=1063.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0784524 Jy ! Component: 100 - total flux cleaned = 0.0960867 Jy ! Component: 150 - total flux cleaned = 0.102133 Jy ! Component: 200 - total flux cleaned = 0.105348 Jy ! Total flux subtracted in 200 components = 0.105348 Jy ! Clean residual min=-0.003322 max=0.002921 Jy/beam ! Clean residual mean=-0.000003 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.105348 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.105348 Jy ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=5.506 mas, bpa=-12.55 degrees ! Estimated noise=633.431 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241754 Jy ! Component: 100 - total flux cleaned = 0.00348863 Jy ! Component: 150 - total flux cleaned = 0.00442078 Jy ! Component: 200 - total flux cleaned = 0.00520321 Jy ! Total flux subtracted in 200 components = 0.00520321 Jy ! Clean residual min=-0.001770 max=0.001406 Jy/beam ! Clean residual mean=-0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.110551 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 43 components and 0.110551 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.291 mas, bmaj=8.926 mas, bpa=-13.78 degrees ! Estimated noise=776.092 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000777432 Jy ! Component: 100 - total flux cleaned = 0.00100552 Jy ! Component: 150 - total flux cleaned = 0.00114191 Jy ! Component: 200 - total flux cleaned = 0.00121083 Jy ! Total flux subtracted in 200 components = 0.00121083 Jy ! Clean residual min=-0.001521 max=0.001382 Jy/beam ! Clean residual mean=-0.000002 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.111762 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.19196e-05 Jy ! Component: 100 - total flux cleaned = 0.000117369 Jy ! Component: 150 - total flux cleaned = 0.000151532 Jy ! Component: 200 - total flux cleaned = 0.000198588 Jy ! Total flux subtracted in 200 components = 0.000198588 Jy ! Clean residual min=-0.001490 max=0.001357 Jy/beam ! Clean residual mean=-0.000001 rms=0.000391 Jy/beam ! Combined flux in latest and established models = 0.111961 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 92 components and 0.111961 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.723 mas, bmaj=5.506 mas, bpa=-12.55 degrees ! Estimated noise=633.431 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000207866 Jy ! Component: 100 - total flux cleaned = 0.000293667 Jy ! Component: 150 - total flux cleaned = 0.000320104 Jy ! Component: 200 - total flux cleaned = 0.000370373 Jy ! Total flux subtracted in 200 components = 0.000370373 Jy ! Clean residual min=-0.001585 max=0.001441 Jy/beam ! Clean residual mean=-0.000001 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 0.112331 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 115 components and 0.112331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077979Jy sigma=0.000649 ! Fit after self-cal, rms=0.077970Jy sigma=0.000649 wmodel J0012+4704_S_2017_03_27_pus_map.mod ! Writing 115 model components to file: J0012+4704_S_2017_03_27_pus_map.mod wobs J0012+4704_S_2017_03_27_pus_uvs.fits ! Writing UV FITS file: J0012+4704_S_2017_03_27_pus_uvs.fits wwins J0012+4704_S_2017_03_27_pus_map.win ! wwins: Wrote 2 windows to J0012+4704_S_2017_03_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -6.82307e-05 Jy ! Component: 100 - total flux cleaned = 3.08114e-05 Jy ! Component: 150 - total flux cleaned = 0.000102889 Jy ! Component: 200 - total flux cleaned = 0.000171328 Jy ! Component: 250 - total flux cleaned = 0.000170921 Jy ! Component: 300 - total flux cleaned = 0.000171056 Jy ! Component: 350 - total flux cleaned = 0.000191653 Jy ! Component: 400 - total flux cleaned = 0.000129365 Jy ! Component: 450 - total flux cleaned = 0.000209652 Jy ! Component: 500 - total flux cleaned = 0.000229219 Jy ! Component: 550 - total flux cleaned = 0.000287573 Jy ! Component: 600 - total flux cleaned = 0.000306488 Jy ! Component: 650 - total flux cleaned = 0.000381841 Jy ! Component: 700 - total flux cleaned = 0.000437399 Jy ! Component: 750 - total flux cleaned = 0.000491537 Jy ! Component: 800 - total flux cleaned = 0.000491664 Jy ! Component: 850 - total flux cleaned = 0.000562279 Jy ! Component: 900 - total flux cleaned = 0.000597136 Jy ! Component: 950 - total flux cleaned = 0.000631477 Jy ! Component: 1000 - total flux cleaned = 0.000716017 Jy ! Component: 1050 - total flux cleaned = 0.000715955 Jy ! Component: 1100 - total flux cleaned = 0.000699634 Jy ! Component: 1150 - total flux cleaned = 0.000683579 Jy ! Component: 1200 - total flux cleaned = 0.000683526 Jy ! Component: 1250 - total flux cleaned = 0.000747079 Jy ! Component: 1300 - total flux cleaned = 0.00073103 Jy ! Component: 1350 - total flux cleaned = 0.000715397 Jy ! Component: 1400 - total flux cleaned = 0.000746178 Jy ! Component: 1450 - total flux cleaned = 0.000791969 Jy ! Component: 1500 - total flux cleaned = 0.000821918 Jy ! Component: 1550 - total flux cleaned = 0.000837004 Jy ! Component: 1600 - total flux cleaned = 0.000866525 Jy ! Component: 1650 - total flux cleaned = 0.000851922 Jy ! Component: 1700 - total flux cleaned = 0.000866475 Jy ! Component: 1750 - total flux cleaned = 0.000837589 Jy ! Component: 1800 - total flux cleaned = 0.000894914 Jy ! Component: 1850 - total flux cleaned = 0.000937299 Jy ! Component: 1900 - total flux cleaned = 0.000909156 Jy ! Component: 1950 - total flux cleaned = 0.000937136 Jy ! Component: 2000 - total flux cleaned = 0.00095096 Jy ! Component: 2050 - total flux cleaned = 0.000978432 Jy ! Component: 2100 - total flux cleaned = 0.000951345 Jy ! Component: 2150 - total flux cleaned = 0.00103246 Jy ! Component: 2200 - total flux cleaned = 0.00103242 Jy ! Component: 2250 - total flux cleaned = 0.0010988 Jy ! Component: 2300 - total flux cleaned = 0.00113851 Jy ! Component: 2350 - total flux cleaned = 0.00112543 Jy ! Component: 2400 - total flux cleaned = 0.00120315 Jy ! Component: 2450 - total flux cleaned = 0.00122882 Jy ! Component: 2500 - total flux cleaned = 0.00119056 Jy ! Component: 2550 - total flux cleaned = 0.00126678 Jy ! Component: 2600 - total flux cleaned = 0.0012669 Jy ! Component: 2650 - total flux cleaned = 0.00134198 Jy ! Component: 2700 - total flux cleaned = 0.00137915 Jy ! Component: 2750 - total flux cleaned = 0.00140391 Jy ! Component: 2800 - total flux cleaned = 0.00144076 Jy ! Component: 2850 - total flux cleaned = 0.00152592 Jy ! Component: 2900 - total flux cleaned = 0.00155005 Jy ! Component: 2950 - total flux cleaned = 0.00161008 Jy ! Component: 3000 - total flux cleaned = 0.00161019 Jy ! Component: 3050 - total flux cleaned = 0.00164577 Jy ! Component: 3100 - total flux cleaned = 0.00169267 Jy ! Component: 3150 - total flux cleaned = 0.00173947 Jy ! Component: 3200 - total flux cleaned = 0.00177428 Jy ! Component: 3250 - total flux cleaned = 0.00177422 Jy ! Component: 3300 - total flux cleaned = 0.0017857 Jy ! Component: 3350 - total flux cleaned = 0.00187696 Jy ! Component: 3400 - total flux cleaned = 0.00188833 Jy ! Component: 3450 - total flux cleaned = 0.00194467 Jy ! Component: 3500 - total flux cleaned = 0.00198951 Jy ! Component: 3550 - total flux cleaned = 0.00200063 Jy ! Component: 3600 - total flux cleaned = 0.00206704 Jy ! Component: 3650 - total flux cleaned = 0.00211094 Jy ! Component: 3700 - total flux cleaned = 0.00211106 Jy ! Component: 3750 - total flux cleaned = 0.00217632 Jy ! Component: 3800 - total flux cleaned = 0.0021547 Jy ! Component: 3850 - total flux cleaned = 0.00219776 Jy ! Component: 3900 - total flux cleaned = 0.00226177 Jy ! Component: 3950 - total flux cleaned = 0.00230415 Jy ! Component: 4000 - total flux cleaned = 0.00232544 Jy ! Component: 4050 - total flux cleaned = 0.00234646 Jy ! Total flux subtracted in 4096 components = 0.00243002 Jy ! Clean residual min=-0.000621 max=0.000540 Jy/beam ! Clean residual mean=-0.000001 rms=0.000188 Jy/beam ! Combined flux in latest and established models = 0.114761 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 400 components and 0.114761 Jy ![Exited script file: muppet] wmap "J0012+4704_S_2017_03_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.723 x 5.506 at -12.55 degrees (North through East) ! Clean map min=-0.0012143 max=0.10063 Jy/beam ! Writing clean map to FITS file: J0012+4704_S_2017_03_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.100625 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000187065 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.557708 0.557708 1.11542 2.23083 4.46166 8.92332 17.8466 35.6933 71.3866 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.1 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.723 x 5.506 at -12.55 degrees (North through East) ! Clean map min=-0.0012143 max=0.10063 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0012+4704_S_2017_03_27_pus_uvs.log closed on Sun Apr 28 14:26:51 2019