! Started logfile: J0012+3353_S_2017_04_28_pus_uvs.log on Thu May 2 16:12:21 2019 obs J0012+3353_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0012+3353_S_2017_04_28_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.923611 visibilities/baseline/integration-bin. ! Found source: J0012+3353 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 23940 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0012+3353_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 75 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 74 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 730 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.963010Jy sigma=0.008322 ! Fit after self-cal, rms=0.942454Jy sigma=0.008199 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.798 mas, bmaj=5.52 mas, bpa=-5.044 degrees ! Estimated noise=1047.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0468183 Jy ! Component: 100 - total flux cleaned = 0.0571959 Jy ! Total flux subtracted in 100 components = 0.0571959 Jy ! Clean residual min=-0.002984 max=0.003545 Jy/beam ! Clean residual mean=0.000004 rms=0.000765 Jy/beam ! Combined flux in latest and established models = 0.0571959 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0571959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088444Jy sigma=0.000662 ! Fit after self-cal, rms=0.088259Jy sigma=0.000661 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=6.539 mas, bpa=-1.296 degrees ! Estimated noise=602.966 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00481718 Jy ! Component: 100 - total flux cleaned = 0.00693811 Jy ! Component: 150 - total flux cleaned = 0.00760955 Jy ! Component: 200 - total flux cleaned = 0.00771492 Jy ! Total flux subtracted in 200 components = 0.00771492 Jy ! Clean residual min=-0.002030 max=0.002374 Jy/beam ! Clean residual mean=0.000004 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.0649108 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 15 components and 0.0649108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087981Jy sigma=0.000659 ! Fit after self-cal, rms=0.087963Jy sigma=0.000659 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.05 HN 0.99 KP 0.99 ! LA 1.05 MK 1.02 NL 0.98 OV 0.99 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.94 HN 1.07 KP 0.98 ! LA 0.99 MK 1.01 NL 1.12 OV 1.00 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.09 KP 1.11 ! LA 1.00 MK 1.01 NL 1.04 OV 0.97 ! PT 1.00 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.98 HN 0.91 KP 1.00* ! LA 0.78 MK 0.90 NL 1.00* OV 1.00* ! PT 1.01 SC 1.00* ! ! ! Fit before self-cal, rms=0.087963Jy sigma=0.000659 ! Fit after self-cal, rms=0.086700Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.386 mas, bmaj=6.49 mas, bpa=-0.6642 degrees ! Estimated noise=602.05 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000906493 Jy ! Component: 100 - total flux cleaned = 0.00105608 Jy ! Component: 150 - total flux cleaned = 0.00113956 Jy ! Component: 200 - total flux cleaned = 0.00121451 Jy ! Total flux subtracted in 200 components = 0.00121451 Jy ! Clean residual min=-0.001716 max=0.002119 Jy/beam ! Clean residual mean=0.000002 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0661253 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 23 components and 0.0661253 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086677Jy sigma=0.000658 ! Fit after self-cal, rms=0.086665Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086665Jy sigma=0.000657 ! Fit after self-cal, rms=0.085572Jy sigma=0.000655 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=6.475 mas, bpa=-0.8843 degrees ! Estimated noise=604.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00050339 Jy ! Component: 100 - total flux cleaned = 0.000577992 Jy ! Component: 150 - total flux cleaned = 0.000657843 Jy ! Component: 200 - total flux cleaned = 0.00068144 Jy ! Total flux subtracted in 200 components = 0.00068144 Jy ! Clean residual min=-0.001533 max=0.001605 Jy/beam ! Clean residual mean=0.000000 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0668068 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 27 components and 0.0668068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085566Jy sigma=0.000655 ! Fit after self-cal, rms=0.085594Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-93, 31.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000439104 Jy ! Component: 100 - total flux cleaned = 0.000319434 Jy ! Component: 150 - total flux cleaned = 0.00034833 Jy ! Component: 200 - total flux cleaned = 0.000299377 Jy ! Total flux subtracted in 200 components = 0.000299377 Jy ! Clean residual min=-0.001563 max=0.001558 Jy/beam ! Clean residual mean=0.000000 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.0671061 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 42 components and 0.0671061 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085560Jy sigma=0.000655 ! Fit after self-cal, rms=0.085554Jy sigma=0.000655 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085554Jy sigma=0.000655 ! Fit after self-cal, rms=0.086286Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.368 mas, bmaj=6.478 mas, bpa=-0.7746 degrees ! Estimated noise=604.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000177342 Jy ! Component: 100 - total flux cleaned = 0.000201365 Jy ! Component: 150 - total flux cleaned = 0.000179788 Jy ! Component: 200 - total flux cleaned = 0.000160574 Jy ! Total flux subtracted in 200 components = 0.000160574 Jy ! Clean residual min=-0.001452 max=0.001529 Jy/beam ! Clean residual mean=0.000000 rms=0.000350 Jy/beam ! Combined flux in latest and established models = 0.0672667 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 48 components and 0.0672667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086271Jy sigma=0.000654 ! Fit after self-cal, rms=0.086291Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000641381 Jy ! Component: 100 - total flux cleaned = 0.000576749 Jy ! Component: 150 - total flux cleaned = 0.000630177 Jy ! Component: 200 - total flux cleaned = 0.000630329 Jy ! Total flux subtracted in 200 components = 0.000630329 Jy ! Clean residual min=-0.001483 max=0.001326 Jy/beam ! Clean residual mean=0.000000 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.067897 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.067897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086264Jy sigma=0.000654 ! Fit after self-cal, rms=0.086259Jy sigma=0.000654 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086259Jy sigma=0.000654 ! Fit after self-cal, rms=0.086322Jy sigma=0.000654 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.067 mas, bmaj=9.316 mas, bpa=0.4652 degrees ! Estimated noise=782.733 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000701089 Jy ! Component: 100 - total flux cleaned = 0.000720392 Jy ! Component: 150 - total flux cleaned = 0.000767814 Jy ! Component: 200 - total flux cleaned = 0.000809845 Jy ! Total flux subtracted in 200 components = 0.000809845 Jy ! Clean residual min=-0.001527 max=0.001483 Jy/beam ! Clean residual mean=-0.000000 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.0687069 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 0.0687069 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086318Jy sigma=0.000654 ! Fit after self-cal, rms=0.086317Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000183127 Jy ! Component: 100 - total flux cleaned = 0.00015629 Jy ! Component: 150 - total flux cleaned = 0.000118539 Jy ! Component: 200 - total flux cleaned = 7.22632e-05 Jy ! Total flux subtracted in 200 components = 7.22632e-05 Jy ! Clean residual min=-0.001514 max=0.001468 Jy/beam ! Clean residual mean=-0.000000 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0687791 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 86 components and 0.0687792 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086314Jy sigma=0.000654 ! Fit after self-cal, rms=0.086313Jy sigma=0.000654 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=6.474 mas, bpa=-0.8017 degrees ! Estimated noise=603.809 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.361 x 6.474 at -0.8017 degrees (North through East) ! Clean map min=-0.00154 max=0.060772 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.773 mas, bmaj=5.448 mas, bpa=-4.796 degrees ! Estimated noise=1041.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463003 Jy ! Component: 100 - total flux cleaned = 0.0571196 Jy ! Component: 150 - total flux cleaned = 0.06163 Jy ! Component: 200 - total flux cleaned = 0.0636839 Jy ! Total flux subtracted in 200 components = 0.0636839 Jy ! Clean residual min=-0.002923 max=0.002949 Jy/beam ! Clean residual mean=0.000000 rms=0.000701 Jy/beam ! Combined flux in latest and established models = 0.0636839 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0636839 Jy ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=6.474 mas, bpa=-0.8017 degrees ! Estimated noise=603.809 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288367 Jy ! Component: 100 - total flux cleaned = 0.00403069 Jy ! Component: 150 - total flux cleaned = 0.00437828 Jy ! Component: 200 - total flux cleaned = 0.00476027 Jy ! Total flux subtracted in 200 components = 0.00476027 Jy ! Clean residual min=-0.001508 max=0.001299 Jy/beam ! Clean residual mean=0.000000 rms=0.000352 Jy/beam ! Combined flux in latest and established models = 0.0684441 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 36 components and 0.0684441 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.067 mas, bmaj=9.316 mas, bpa=0.4652 degrees ! Estimated noise=782.733 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000428691 Jy ! Component: 100 - total flux cleaned = 0.000327196 Jy ! Component: 150 - total flux cleaned = 0.000298896 Jy ! Component: 200 - total flux cleaned = 0.000178324 Jy ! Total flux subtracted in 200 components = 0.000178324 Jy ! Clean residual min=-0.001461 max=0.001484 Jy/beam ! Clean residual mean=-0.000000 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0686225 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.64013e-05 Jy ! Component: 100 - total flux cleaned = -0.000145552 Jy ! Component: 150 - total flux cleaned = -0.00020082 Jy ! Component: 200 - total flux cleaned = -0.000253008 Jy ! Total flux subtracted in 200 components = -0.000253008 Jy ! Clean residual min=-0.001499 max=0.001449 Jy/beam ! Clean residual mean=0.000000 rms=0.000389 Jy/beam ! Combined flux in latest and established models = 0.0683695 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 69 components and 0.0683694 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=6.474 mas, bpa=-0.8017 degrees ! Estimated noise=603.809 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.3693e-05 Jy ! Component: 100 - total flux cleaned = -4.16086e-05 Jy ! Component: 150 - total flux cleaned = -1.27731e-05 Jy ! Component: 200 - total flux cleaned = -4.01166e-05 Jy ! Total flux subtracted in 200 components = -4.01166e-05 Jy ! Clean residual min=-0.001463 max=0.001271 Jy/beam ! Clean residual mean=0.000000 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.0683293 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 87 components and 0.0683293 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086317Jy sigma=0.000654 ! Fit after self-cal, rms=0.086308Jy sigma=0.000654 wmodel J0012+3353_S_2017_04_28_pus_map.mod ! Writing 87 model components to file: J0012+3353_S_2017_04_28_pus_map.mod wobs J0012+3353_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0012+3353_S_2017_04_28_pus_uvs.fits wwins J0012+3353_S_2017_04_28_pus_map.win ! wwins: Wrote 4 windows to J0012+3353_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000562688 Jy ! Component: 100 - total flux cleaned = -0.00082091 Jy ! Component: 150 - total flux cleaned = -0.00106451 Jy ! Component: 200 - total flux cleaned = -0.00123491 Jy ! Component: 250 - total flux cleaned = -0.00133767 Jy ! Component: 300 - total flux cleaned = -0.0014779 Jy ! Component: 350 - total flux cleaned = -0.0015169 Jy ! Component: 400 - total flux cleaned = -0.00157478 Jy ! Component: 450 - total flux cleaned = -0.00163156 Jy ! Component: 500 - total flux cleaned = -0.00174333 Jy ! Component: 550 - total flux cleaned = -0.00185288 Jy ! Component: 600 - total flux cleaned = -0.00196085 Jy ! Component: 650 - total flux cleaned = -0.00204953 Jy ! Component: 700 - total flux cleaned = -0.00208476 Jy ! Component: 750 - total flux cleaned = -0.00213676 Jy ! Component: 800 - total flux cleaned = -0.00212006 Jy ! Component: 850 - total flux cleaned = -0.00220422 Jy ! Component: 900 - total flux cleaned = -0.00223701 Jy ! Component: 950 - total flux cleaned = -0.00223688 Jy ! Component: 1000 - total flux cleaned = -0.0022856 Jy ! Component: 1050 - total flux cleaned = -0.00233349 Jy ! Component: 1100 - total flux cleaned = -0.00236524 Jy ! Component: 1150 - total flux cleaned = -0.00242777 Jy ! Component: 1200 - total flux cleaned = -0.00242792 Jy ! Component: 1250 - total flux cleaned = -0.00247405 Jy ! Component: 1300 - total flux cleaned = -0.00248911 Jy ! Component: 1350 - total flux cleaned = -0.00254883 Jy ! Component: 1400 - total flux cleaned = -0.0025636 Jy ! Component: 1450 - total flux cleaned = -0.00259313 Jy ! Component: 1500 - total flux cleaned = -0.00266604 Jy ! Component: 1550 - total flux cleaned = -0.00269474 Jy ! Component: 1600 - total flux cleaned = -0.00273759 Jy ! Component: 1650 - total flux cleaned = -0.00282255 Jy ! Component: 1700 - total flux cleaned = -0.00283647 Jy ! Component: 1750 - total flux cleaned = -0.00285041 Jy ! Component: 1800 - total flux cleaned = -0.00287827 Jy ! Component: 1850 - total flux cleaned = -0.00294674 Jy ! Component: 1900 - total flux cleaned = -0.0029606 Jy ! Component: 1950 - total flux cleaned = -0.0030281 Jy ! Component: 2000 - total flux cleaned = -0.00306837 Jy ! Component: 2050 - total flux cleaned = -0.00308161 Jy ! Component: 2100 - total flux cleaned = -0.00313432 Jy ! Component: 2150 - total flux cleaned = -0.00317367 Jy ! Component: 2200 - total flux cleaned = -0.00319952 Jy ! Component: 2250 - total flux cleaned = -0.00326399 Jy ! Component: 2300 - total flux cleaned = -0.00330233 Jy ! Component: 2350 - total flux cleaned = -0.00336572 Jy ! Component: 2400 - total flux cleaned = -0.00342843 Jy ! Component: 2450 - total flux cleaned = -0.00339106 Jy ! Component: 2500 - total flux cleaned = -0.00346531 Jy ! Component: 2550 - total flux cleaned = -0.00349005 Jy ! Component: 2600 - total flux cleaned = -0.00355109 Jy ! Component: 2650 - total flux cleaned = -0.00359969 Jy ! Component: 2700 - total flux cleaned = -0.00367192 Jy ! Component: 2750 - total flux cleaned = -0.0037197 Jy ! Component: 2800 - total flux cleaned = -0.00375541 Jy ! Component: 2850 - total flux cleaned = -0.00382621 Jy ! Component: 2900 - total flux cleaned = -0.00387312 Jy ! Component: 2950 - total flux cleaned = -0.003908 Jy ! Component: 3000 - total flux cleaned = -0.00394273 Jy ! Component: 3050 - total flux cleaned = -0.00401176 Jy ! Component: 3100 - total flux cleaned = -0.00404599 Jy ! Component: 3150 - total flux cleaned = -0.00411411 Jy ! Component: 3200 - total flux cleaned = -0.00412531 Jy ! Component: 3250 - total flux cleaned = -0.00415896 Jy ! Component: 3300 - total flux cleaned = -0.00420365 Jy ! Component: 3350 - total flux cleaned = -0.00423685 Jy ! Component: 3400 - total flux cleaned = -0.00425893 Jy ! Component: 3450 - total flux cleaned = -0.00436831 Jy ! Component: 3500 - total flux cleaned = -0.00436833 Jy ! Component: 3550 - total flux cleaned = -0.00444393 Jy ! Component: 3600 - total flux cleaned = -0.00444387 Jy ! Component: 3650 - total flux cleaned = -0.00448653 Jy ! Component: 3700 - total flux cleaned = -0.00451834 Jy ! Component: 3750 - total flux cleaned = -0.00456059 Jy ! Component: 3800 - total flux cleaned = -0.00462363 Jy ! Component: 3850 - total flux cleaned = -0.00466556 Jy ! Component: 3900 - total flux cleaned = -0.0046552 Jy ! Component: 3950 - total flux cleaned = -0.00467589 Jy ! Component: 4000 - total flux cleaned = -0.0047685 Jy ! Component: 4050 - total flux cleaned = -0.00474812 Jy ! Total flux subtracted in 4096 components = -0.00473802 Jy ! Clean residual min=-0.000710 max=0.000857 Jy/beam ! Clean residual mean=-0.000001 rms=0.000189 Jy/beam ! Combined flux in latest and established models = 0.0635913 Jy keep ! Adding 296 model components to the UV plane model. ! The established model now contains 383 components and 0.0635913 Jy ![Exited script file: muppet] wmap "J0012+3353_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.361 x 6.474 at -0.8017 degrees (North through East) ! Clean map min=-0.0012686 max=0.060567 Jy/beam ! Writing clean map to FITS file: J0012+3353_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.060567 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000188646 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.9344 0.9344 1.8688 3.7376 7.4752 14.9504 29.9008 59.8016 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.06 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.361 x 6.474 at -0.8017 degrees (North through East) ! Clean map min=-0.0012686 max=0.060567 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0012+3353_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:12:26 2019