! Started logfile: J0011-2612_X_2017_06_10_pus_uvs.log on Mon May 6 12:39:17 2019 obs J0011-2612_X_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0011-2612_X_2017_06_10_pus_uva.fits ! AN table 1: 64 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.530903 visibilities/baseline/integration-bin. ! Found source: J0011-2612 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.44388e+09 3.2e+07 1 3.2e+07 ! 02 2 8.47588e+09 3.2e+07 1 3.2e+07 ! 03 3 8.50788e+09 3.2e+07 1 3.2e+07 ! 04 4 8.53988e+09 3.2e+07 1 3.2e+07 ! 05 5 8.60388e+09 3.2e+07 1 3.2e+07 ! 06 6 8.63588e+09 3.2e+07 1 3.2e+07 ! 07 7 8.69988e+09 3.2e+07 1 3.2e+07 ! 08 8 8.73188e+09 3.2e+07 1 3.2e+07 ! 09 9 8.79588e+09 3.2e+07 1 3.2e+07 ! 10 10 8.82788e+09 3.2e+07 1 3.2e+07 ! 11 11 8.85988e+09 3.2e+07 1 3.2e+07 ! 12 12 8.89188e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1309 lines of history. ! ! Reading 18348 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =",field_size ! field_size = 512 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@muppet J0011-2612_X_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 512x512 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 262 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 262 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 290 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 269 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 290 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 290 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 290 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.644829Jy sigma=0.005365 ! Fit after self-cal, rms=0.628485Jy sigma=0.005230 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6236 mas, bmaj=1.612 mas, bpa=-3.867 degrees ! Estimated noise=1156.25 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.277545 Jy ! Component: 100 - total flux cleaned = 0.339006 Jy ! Total flux subtracted in 100 components = 0.339006 Jy ! Clean residual min=-0.008889 max=0.022452 Jy/beam ! Clean residual mean=-0.000018 rms=0.002818 Jy/beam ! Combined flux in latest and established models = 0.339006 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.339006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106501Jy sigma=0.000857 ! Fit after self-cal, rms=0.106499Jy sigma=0.000857 ! Inverting map ! Added new window around map position (-0.6, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0252853 Jy ! Component: 100 - total flux cleaned = 0.040698 Jy ! Total flux subtracted in 100 components = 0.040698 Jy ! Clean residual min=-0.007271 max=0.014071 Jy/beam ! Clean residual mean=0.000001 rms=0.002103 Jy/beam ! Combined flux in latest and established models = 0.379704 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 17 components and 0.379704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.094624Jy sigma=0.000746 ! Fit after self-cal, rms=0.094475Jy sigma=0.000744 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8193 mas, bmaj=1.984 mas, bpa=-4.125 degrees ! Estimated noise=660.775 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0226989 Jy ! Component: 100 - total flux cleaned = 0.0338692 Jy ! Component: 150 - total flux cleaned = 0.0398397 Jy ! Component: 200 - total flux cleaned = 0.0431692 Jy ! Total flux subtracted in 200 components = 0.0431692 Jy ! Clean residual min=-0.004492 max=0.007488 Jy/beam ! Clean residual mean=0.000037 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.422873 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 34 components and 0.422874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089545Jy sigma=0.000697 ! Fit after self-cal, rms=0.089488Jy sigma=0.000696 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.97 HN 1.09 KP 0.99 ! LA 0.96 MK 0.98 NL 1.04 OV 0.98 ! PT 1.00 SC 1.00 ! ! ! Correcting IF 2. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.20 KP 0.97 ! LA 0.96 MK 0.98 NL 1.04 OV 0.97 ! PT 1.04 SC 1.02 ! ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.19 KP 0.98 ! LA 1.00 MK 1.00 NL 1.04 OV 0.99 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 4. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.95 HN 1.09 KP 0.97 ! LA 1.01 MK 1.02 NL 1.04 OV 0.98 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 5. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.95 HN 1.00* KP 0.97 ! LA 0.98 MK 1.01 NL 1.05 OV 0.99 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 6. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.96 HN 1.06 KP 0.99 ! LA 0.98 MK 1.01 NL 1.03 OV 0.99 ! PT 1.01 SC 1.00 ! ! ! Correcting IF 7. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.96 HN 1.04 KP 0.98 ! LA 1.00 MK 1.00 NL 1.04 OV 1.00 ! PT 1.02 SC 1.00 ! ! ! Correcting IF 8. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.02 HN 1.02 KP 0.99 ! LA 0.96 MK 1.00 NL 1.02 OV 0.99 ! PT 1.05 SC 1.02 ! ! ! Correcting IF 9. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.04 KP 0.98 ! LA 0.97 MK 0.97 NL 1.04 OV 1.01 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 10. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00* KP 0.99 ! LA 1.01 MK 1.02 NL 1.03 OV 0.98 ! PT 1.02 SC 0.97 ! ! ! Correcting IF 11. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.00* KP 0.98 ! LA 0.99 MK 0.99 NL 1.04 OV 1.01 ! PT 1.05 SC 0.98 ! ! ! Correcting IF 12. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.00* KP 0.88 ! LA 1.00 MK 1.01 NL 1.04 OV 1.00 ! PT 1.03 SC 0.96 ! ! ! Fit before self-cal, rms=0.089488Jy sigma=0.000696 ! Fit after self-cal, rms=0.089223Jy sigma=0.000686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.819 mas, bmaj=2.014 mas, bpa=-2.997 degrees ! Estimated noise=666.647 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200019 Jy ! Component: 100 - total flux cleaned = -0.000201953 Jy ! Component: 150 - total flux cleaned = -0.000202144 Jy ! Component: 200 - total flux cleaned = -0.000206417 Jy ! Total flux subtracted in 200 components = -0.000206417 Jy ! Clean residual min=-0.004742 max=0.005661 Jy/beam ! Clean residual mean=0.000000 rms=0.001283 Jy/beam ! Combined flux in latest and established models = 0.422667 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 0.422667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089185Jy sigma=0.000685 ! Fit after self-cal, rms=0.089208Jy sigma=0.000685 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.089208Jy sigma=0.000685 ! Fit after self-cal, rms=0.086867Jy sigma=0.000660 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.819 mas, bmaj=2.014 mas, bpa=-2.994 degrees ! Estimated noise=667.257 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000523765 Jy ! Component: 100 - total flux cleaned = 0.000524866 Jy ! Component: 150 - total flux cleaned = 0.00055343 Jy ! Component: 200 - total flux cleaned = 0.000552555 Jy ! Total flux subtracted in 200 components = 0.000552555 Jy ! Clean residual min=-0.002225 max=0.002255 Jy/beam ! Clean residual mean=-0.000004 rms=0.000595 Jy/beam ! Combined flux in latest and established models = 0.42322 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 46 components and 0.42322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086843Jy sigma=0.000659 ! Fit after self-cal, rms=0.086860Jy sigma=0.000659 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79811e-05 Jy ! Component: 100 - total flux cleaned = -7.60019e-05 Jy ! Component: 150 - total flux cleaned = -5.48986e-05 Jy ! Component: 200 - total flux cleaned = -5.44648e-05 Jy ! Total flux subtracted in 200 components = -5.44648e-05 Jy ! Clean residual min=-0.002221 max=0.002225 Jy/beam ! Clean residual mean=-0.000004 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.423165 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.423165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086850Jy sigma=0.000659 ! Fit after self-cal, rms=0.086847Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086847Jy sigma=0.000659 ! Fit after self-cal, rms=0.086663Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8186 mas, bmaj=2.014 mas, bpa=-3.003 degrees ! Estimated noise=666.845 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00020512 Jy ! Component: 100 - total flux cleaned = 0.000140595 Jy ! Component: 150 - total flux cleaned = 8.77565e-05 Jy ! Component: 200 - total flux cleaned = 0.000102254 Jy ! Total flux subtracted in 200 components = 0.000102254 Jy ! Clean residual min=-0.001727 max=0.001647 Jy/beam ! Clean residual mean=-0.000001 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.423267 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.423268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086651Jy sigma=0.000653 ! Fit after self-cal, rms=0.086659Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.63861e-05 Jy ! Component: 100 - total flux cleaned = 1.18052e-05 Jy ! Component: 150 - total flux cleaned = -1.98648e-06 Jy ! Component: 200 - total flux cleaned = 9.12569e-06 Jy ! Total flux subtracted in 200 components = 9.12569e-06 Jy ! Clean residual min=-0.001716 max=0.001646 Jy/beam ! Clean residual mean=-0.000001 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.423277 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 57 components and 0.423277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086653Jy sigma=0.000653 ! Fit after self-cal, rms=0.086651Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086651Jy sigma=0.000653 ! Fit after self-cal, rms=0.086661Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.327 mas, bmaj=5.415 mas, bpa=-0.2767 degrees ! Estimated noise=865.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000275729 Jy ! Component: 100 - total flux cleaned = 0.000275877 Jy ! Component: 150 - total flux cleaned = 0.000262788 Jy ! Component: 200 - total flux cleaned = 0.000252246 Jy ! Total flux subtracted in 200 components = 0.000252246 Jy ! Clean residual min=-0.002107 max=0.001540 Jy/beam ! Clean residual mean=-0.000002 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.423529 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 62 components and 0.423529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086660Jy sigma=0.000653 ! Fit after self-cal, rms=0.086656Jy sigma=0.000653 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.51062e-05 Jy ! Component: 100 - total flux cleaned = 7.66599e-05 Jy ! Component: 150 - total flux cleaned = 7.73406e-05 Jy ! Component: 200 - total flux cleaned = 7.02448e-05 Jy ! Total flux subtracted in 200 components = 7.02448e-05 Jy ! Clean residual min=-0.002091 max=0.001545 Jy/beam ! Clean residual mean=-0.000002 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.423599 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 64 components and 0.423599 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086658Jy sigma=0.000653 ! Fit after self-cal, rms=0.086655Jy sigma=0.000653 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8184 mas, bmaj=2.014 mas, bpa=-3.007 degrees ! Estimated noise=666.645 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8184 x 2.014 at -3.007 degrees (North through East) ! Clean map min=-0.0015588 max=0.37161 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6205 mas, bmaj=1.611 mas, bpa=-3.284 degrees ! Estimated noise=1182.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.28045 Jy ! Component: 100 - total flux cleaned = 0.343718 Jy ! Component: 150 - total flux cleaned = 0.371034 Jy ! Component: 200 - total flux cleaned = 0.387494 Jy ! Total flux subtracted in 200 components = 0.387494 Jy ! Clean residual min=-0.003362 max=0.008542 Jy/beam ! Clean residual mean=-0.000012 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.387494 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.387494 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8184 mas, bmaj=2.014 mas, bpa=-3.007 degrees ! Estimated noise=666.645 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174229 Jy ! Component: 100 - total flux cleaned = 0.0257731 Jy ! Component: 150 - total flux cleaned = 0.030112 Jy ! Component: 200 - total flux cleaned = 0.0324718 Jy ! Total flux subtracted in 200 components = 0.0324718 Jy ! Clean residual min=-0.001787 max=0.001601 Jy/beam ! Clean residual mean=-0.000009 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.419966 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 41 components and 0.419966 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.327 mas, bmaj=5.415 mas, bpa=-0.2767 degrees ! Estimated noise=865.605 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192498 Jy ! Component: 100 - total flux cleaned = 0.00258234 Jy ! Component: 150 - total flux cleaned = 0.00280256 Jy ! Component: 200 - total flux cleaned = 0.0028244 Jy ! Total flux subtracted in 200 components = 0.0028244 Jy ! Clean residual min=-0.002184 max=0.001493 Jy/beam ! Clean residual mean=-0.000005 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.42279 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.11869e-05 Jy ! Component: 100 - total flux cleaned = 4.21526e-05 Jy ! Component: 150 - total flux cleaned = 6.22581e-05 Jy ! Component: 200 - total flux cleaned = 8.17005e-05 Jy ! Total flux subtracted in 200 components = 8.17005e-05 Jy ! Clean residual min=-0.002175 max=0.001499 Jy/beam ! Clean residual mean=-0.000005 rms=0.000567 Jy/beam ! Combined flux in latest and established models = 0.422872 Jy ! Adding 10 model components to the UV plane model. ! The established model now contains 49 components and 0.422872 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8184 mas, bmaj=2.014 mas, bpa=-3.007 degrees ! Estimated noise=666.645 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103399 Jy ! Component: 100 - total flux cleaned = -8.58365e-05 Jy ! Component: 150 - total flux cleaned = -5.97345e-05 Jy ! Component: 200 - total flux cleaned = -3.84719e-05 Jy ! Total flux subtracted in 200 components = -3.84719e-05 Jy ! Clean residual min=-0.001613 max=0.001610 Jy/beam ! Clean residual mean=-0.000002 rms=0.000423 Jy/beam ! Combined flux in latest and established models = 0.422834 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 54 components and 0.422834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086645Jy sigma=0.000653 ! Fit after self-cal, rms=0.086641Jy sigma=0.000653 wmodel J0011-2612_X_2017_06_10_pus_map.mod ! Writing 54 model components to file: J0011-2612_X_2017_06_10_pus_map.mod wobs J0011-2612_X_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0011-2612_X_2017_06_10_pus_uvs.fits wwins J0011-2612_X_2017_06_10_pus_map.win ! wwins: Wrote 2 windows to J0011-2612_X_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=2048 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000389481 Jy ! Component: 100 - total flux cleaned = -0.00092336 Jy ! Component: 150 - total flux cleaned = -0.00147827 Jy ! Component: 200 - total flux cleaned = -0.00190628 Jy ! Component: 250 - total flux cleaned = -0.0021496 Jy ! Component: 300 - total flux cleaned = -0.00236178 Jy ! Component: 350 - total flux cleaned = -0.00256716 Jy ! Component: 400 - total flux cleaned = -0.00274437 Jy ! Component: 450 - total flux cleaned = -0.00287409 Jy ! Component: 500 - total flux cleaned = -0.00300099 Jy ! Component: 550 - total flux cleaned = -0.00312501 Jy ! Component: 600 - total flux cleaned = -0.00328742 Jy ! Component: 650 - total flux cleaned = -0.00342703 Jy ! Component: 700 - total flux cleaned = -0.00358446 Jy ! Component: 750 - total flux cleaned = -0.00375885 Jy ! Component: 800 - total flux cleaned = -0.00391131 Jy ! Component: 850 - total flux cleaned = -0.00406161 Jy ! Component: 900 - total flux cleaned = -0.00420992 Jy ! Component: 950 - total flux cleaned = -0.00433798 Jy ! Component: 1000 - total flux cleaned = -0.00442827 Jy ! Component: 1050 - total flux cleaned = -0.0045526 Jy ! Component: 1100 - total flux cleaned = -0.0045526 Jy ! Component: 1150 - total flux cleaned = -0.00458751 Jy ! Component: 1200 - total flux cleaned = -0.00462214 Jy ! Component: 1250 - total flux cleaned = -0.00469021 Jy ! Component: 1300 - total flux cleaned = -0.00467352 Jy ! Component: 1350 - total flux cleaned = -0.00477299 Jy ! Component: 1400 - total flux cleaned = -0.00477281 Jy ! Component: 1450 - total flux cleaned = -0.00483776 Jy ! Component: 1500 - total flux cleaned = -0.00485392 Jy ! Component: 1550 - total flux cleaned = -0.00487005 Jy ! Component: 1600 - total flux cleaned = -0.00483859 Jy ! Component: 1650 - total flux cleaned = -0.00488575 Jy ! Component: 1700 - total flux cleaned = -0.00488588 Jy ! Component: 1750 - total flux cleaned = -0.00487072 Jy ! Component: 1800 - total flux cleaned = -0.00493192 Jy ! Component: 1850 - total flux cleaned = -0.00491691 Jy ! Component: 1900 - total flux cleaned = -0.0049019 Jy ! Component: 1950 - total flux cleaned = -0.00491691 Jy ! Component: 2000 - total flux cleaned = -0.00490215 Jy ! Total flux subtracted in 2048 components = -0.00490219 Jy ! Clean residual min=-0.000839 max=0.000807 Jy/beam ! Clean residual mean=0.000001 rms=0.000278 Jy/beam ! Combined flux in latest and established models = 0.417932 Jy keep ! Adding 151 model components to the UV plane model. ! The established model now contains 205 components and 0.417931 Jy ![Exited script file: muppet] wmap "J0011-2612_X_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8184 x 2.014 at -3.007 degrees (North through East) ! Clean map min=-0.001333 max=0.3728 Jy/beam ! Writing clean map to FITS file: J0011-2612_X_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.372804 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000277959 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.223677 0.223677 0.447355 0.894709 1.78942 3.57884 7.15767 14.3153 28.6307 57.2614 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.372 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8184 x 2.014 at -3.007 degrees (North through East) ! Clean map min=-0.001333 max=0.3728 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0011-2612_X_2017_06_10_pus_uvs.log closed on Mon May 6 12:39:19 2019