! Started logfile: J0011-2612_S_2017_10_09_pus_uvs.log on Sun May 12 13:01:35 2019 obs J0011-2612_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0011-2612_S_2017_10_09_pus_uva.fits ! AN table 1: 24 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.403935 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0011-2612 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 1396 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0011-2612_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 118 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 173 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.703100Jy sigma=0.005195 ! Fit after self-cal, rms=0.683149Jy sigma=0.005042 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.716 mas, bmaj=13.13 mas, bpa=-25.68 degrees ! Estimated noise=3832.04 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.247379 Jy ! Component: 100 - total flux cleaned = 0.314207 Jy ! Total flux subtracted in 100 components = 0.314207 Jy ! Clean residual min=-0.022484 max=0.038302 Jy/beam ! Clean residual mean=0.000004 rms=0.007872 Jy/beam ! Combined flux in latest and established models = 0.314207 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.314207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121084Jy sigma=0.000823 ! Fit after self-cal, rms=0.121079Jy sigma=0.000823 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=14.81 mas, bpa=-26.28 degrees ! Estimated noise=3018.6 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0342691 Jy ! Component: 100 - total flux cleaned = 0.054799 Jy ! Component: 150 - total flux cleaned = 0.0676175 Jy ! Component: 200 - total flux cleaned = 0.0705586 Jy ! Total flux subtracted in 200 components = 0.0705586 Jy ! Clean residual min=-0.014497 max=0.022317 Jy/beam ! Clean residual mean=0.000021 rms=0.004899 Jy/beam ! Combined flux in latest and established models = 0.384765 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 34 components and 0.384765 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109315Jy sigma=0.000746 ! Fit after self-cal, rms=0.109302Jy sigma=0.000746 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.89 HN 0.91 KP 1.07 ! LA 1.04 MK 0.95 NL 0.93 OV 1.00* ! PT 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.41 FD 0.96 HN 0.99 KP 1.00 ! LA 0.95 MK 0.95 NL 1.06 OV 1.00* ! PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 1.01 HN 0.89 KP 0.89 ! LA 0.75 MK 1.01 NL 1.17 OV 1.00* ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 1.02 KP 1.00* ! LA 1.00* MK 1.36 NL 1.00* OV 1.00* ! PT 0.96 ! ! ! Fit before self-cal, rms=0.109302Jy sigma=0.000746 ! Fit after self-cal, rms=0.092475Jy sigma=0.000639 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.283 mas, bmaj=15.97 mas, bpa=-26.51 degrees ! Estimated noise=3037.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0037575 Jy ! Component: 100 - total flux cleaned = -0.00424688 Jy ! Component: 150 - total flux cleaned = -0.00434877 Jy ! Component: 200 - total flux cleaned = -0.0045232 Jy ! Total flux subtracted in 200 components = -0.0045232 Jy ! Clean residual min=-0.007567 max=0.005763 Jy/beam ! Clean residual mean=-0.000003 rms=0.001900 Jy/beam ! Combined flux in latest and established models = 0.380242 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.380242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092136Jy sigma=0.000637 ! Fit after self-cal, rms=0.092189Jy sigma=0.000637 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092189Jy sigma=0.000637 ! Fit after self-cal, rms=0.092705Jy sigma=0.000636 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.293 mas, bmaj=16.04 mas, bpa=-26.54 degrees ! Estimated noise=3045.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00247051 Jy ! Component: 100 - total flux cleaned = -0.0029294 Jy ! Component: 150 - total flux cleaned = -0.00311448 Jy ! Component: 200 - total flux cleaned = -0.00321587 Jy ! Total flux subtracted in 200 components = -0.00321587 Jy ! Clean residual min=-0.007192 max=0.005694 Jy/beam ! Clean residual mean=-0.000002 rms=0.001828 Jy/beam ! Combined flux in latest and established models = 0.377026 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 55 components and 0.377026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092584Jy sigma=0.000636 ! Fit after self-cal, rms=0.092594Jy sigma=0.000636 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00011493 Jy ! Component: 100 - total flux cleaned = -0.000199249 Jy ! Component: 150 - total flux cleaned = -0.000352703 Jy ! Component: 200 - total flux cleaned = -0.000460288 Jy ! Total flux subtracted in 200 components = -0.000460288 Jy ! Clean residual min=-0.007048 max=0.005734 Jy/beam ! Clean residual mean=-0.000002 rms=0.001814 Jy/beam ! Combined flux in latest and established models = 0.376566 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 64 components and 0.376566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092562Jy sigma=0.000635 ! Fit after self-cal, rms=0.092562Jy sigma=0.000635 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092562Jy sigma=0.000635 ! Fit after self-cal, rms=0.092923Jy sigma=0.000635 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.299 mas, bmaj=16.1 mas, bpa=-26.58 degrees ! Estimated noise=3049.08 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00178453 Jy ! Component: 100 - total flux cleaned = -0.00203032 Jy ! Component: 150 - total flux cleaned = -0.00215201 Jy ! Component: 200 - total flux cleaned = -0.00226521 Jy ! Total flux subtracted in 200 components = -0.00226521 Jy ! Clean residual min=-0.006876 max=0.005717 Jy/beam ! Clean residual mean=-0.000002 rms=0.001766 Jy/beam ! Combined flux in latest and established models = 0.374301 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 72 components and 0.374301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092874Jy sigma=0.000635 ! Fit after self-cal, rms=0.092880Jy sigma=0.000635 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146179 Jy ! Component: 100 - total flux cleaned = -0.000216273 Jy ! Component: 150 - total flux cleaned = -0.000314645 Jy ! Component: 200 - total flux cleaned = -0.00040967 Jy ! Total flux subtracted in 200 components = -0.00040967 Jy ! Clean residual min=-0.006857 max=0.005736 Jy/beam ! Clean residual mean=-0.000002 rms=0.001755 Jy/beam ! Combined flux in latest and established models = 0.373891 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.373891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092862Jy sigma=0.000635 ! Fit after self-cal, rms=0.092859Jy sigma=0.000635 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092859Jy sigma=0.000635 ! Fit after self-cal, rms=0.093065Jy sigma=0.000634 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.089 mas, bmaj=24.1 mas, bpa=-14.85 degrees ! Estimated noise=3638.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00167855 Jy ! Component: 100 - total flux cleaned = -0.00180997 Jy ! Component: 150 - total flux cleaned = -0.00192303 Jy ! Component: 200 - total flux cleaned = -0.00197277 Jy ! Total flux subtracted in 200 components = -0.00197277 Jy ! Clean residual min=-0.007004 max=0.005404 Jy/beam ! Clean residual mean=0.000000 rms=0.002137 Jy/beam ! Combined flux in latest and established models = 0.371918 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 83 components and 0.371918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093047Jy sigma=0.000634 ! Fit after self-cal, rms=0.093055Jy sigma=0.000634 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000261493 Jy ! Component: 100 - total flux cleaned = -0.000280893 Jy ! Component: 150 - total flux cleaned = -0.000336483 Jy ! Component: 200 - total flux cleaned = -0.000353621 Jy ! Total flux subtracted in 200 components = -0.000353621 Jy ! Clean residual min=-0.006945 max=0.005445 Jy/beam ! Clean residual mean=0.000001 rms=0.002129 Jy/beam ! Combined flux in latest and established models = 0.371565 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 87 components and 0.371565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093058Jy sigma=0.000634 ! Fit after self-cal, rms=0.093059Jy sigma=0.000634 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=16.15 mas, bpa=-26.61 degrees ! Estimated noise=3049.73 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 16.15 at -26.61 degrees (North through East) ! Clean map min=-0.0064237 max=0.31737 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.694 mas, bmaj=15.53 mas, bpa=-26.48 degrees ! Estimated noise=3784.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.250793 Jy ! Component: 100 - total flux cleaned = 0.310053 Jy ! Component: 150 - total flux cleaned = 0.335652 Jy ! Component: 200 - total flux cleaned = 0.350805 Jy ! Total flux subtracted in 200 components = 0.350805 Jy ! Clean residual min=-0.009482 max=0.010369 Jy/beam ! Clean residual mean=0.000000 rms=0.002663 Jy/beam ! Combined flux in latest and established models = 0.350805 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 35 model components to the UV plane model. ! The established model now contains 35 components and 0.350805 Jy ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=16.15 mas, bpa=-26.61 degrees ! Estimated noise=3049.73 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00978136 Jy ! Component: 100 - total flux cleaned = 0.013956 Jy ! Component: 150 - total flux cleaned = 0.0152901 Jy ! Component: 200 - total flux cleaned = 0.0159426 Jy ! Total flux subtracted in 200 components = 0.0159426 Jy ! Clean residual min=-0.007544 max=0.006206 Jy/beam ! Clean residual mean=0.000000 rms=0.001930 Jy/beam ! Combined flux in latest and established models = 0.366748 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.366748 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.089 mas, bmaj=24.1 mas, bpa=-14.85 degrees ! Estimated noise=3638.31 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134308 Jy ! Component: 100 - total flux cleaned = 0.00177608 Jy ! Component: 150 - total flux cleaned = 0.00190848 Jy ! Component: 200 - total flux cleaned = 0.00201933 Jy ! Total flux subtracted in 200 components = 0.00201933 Jy ! Clean residual min=-0.006987 max=0.006104 Jy/beam ! Clean residual mean=0.000002 rms=0.002223 Jy/beam ! Combined flux in latest and established models = 0.368767 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000200226 Jy ! Component: 100 - total flux cleaned = 0.000341469 Jy ! Component: 150 - total flux cleaned = 0.000474674 Jy ! Component: 200 - total flux cleaned = 0.00064193 Jy ! Total flux subtracted in 200 components = 0.00064193 Jy ! Clean residual min=-0.006872 max=0.005984 Jy/beam ! Clean residual mean=0.000002 rms=0.002170 Jy/beam ! Combined flux in latest and established models = 0.369409 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.369409 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.303 mas, bmaj=16.15 mas, bpa=-26.61 degrees ! Estimated noise=3049.73 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000239737 Jy ! Component: 100 - total flux cleaned = 0.000306991 Jy ! Component: 150 - total flux cleaned = 0.000371739 Jy ! Component: 200 - total flux cleaned = 0.000429898 Jy ! Total flux subtracted in 200 components = 0.000429898 Jy ! Clean residual min=-0.006760 max=0.005752 Jy/beam ! Clean residual mean=-0.000001 rms=0.001793 Jy/beam ! Combined flux in latest and established models = 0.369839 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 86 components and 0.369839 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093208Jy sigma=0.000635 ! Fit after self-cal, rms=0.093181Jy sigma=0.000635 wmodel J0011-2612_S_2017_10_09_pus_map.mod ! Writing 86 model components to file: J0011-2612_S_2017_10_09_pus_map.mod wobs J0011-2612_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0011-2612_S_2017_10_09_pus_uvs.fits wwins J0011-2612_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0011-2612_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0030623 Jy ! Component: 100 - total flux cleaned = -0.00489308 Jy ! Component: 150 - total flux cleaned = -0.00557375 Jy ! Component: 200 - total flux cleaned = -0.00646614 Jy ! Component: 250 - total flux cleaned = -0.00680103 Jy ! Component: 300 - total flux cleaned = -0.00703212 Jy ! Component: 350 - total flux cleaned = -0.00710488 Jy ! Component: 400 - total flux cleaned = -0.00717401 Jy ! Component: 450 - total flux cleaned = -0.00704106 Jy ! Component: 500 - total flux cleaned = -0.00691492 Jy ! Component: 550 - total flux cleaned = -0.00685392 Jy ! Component: 600 - total flux cleaned = -0.0065654 Jy ! Component: 650 - total flux cleaned = -0.00651293 Jy ! Component: 700 - total flux cleaned = -0.00619566 Jy ! Component: 750 - total flux cleaned = -0.00593949 Jy ! Component: 800 - total flux cleaned = -0.00564213 Jy ! Component: 850 - total flux cleaned = -0.0054502 Jy ! Component: 900 - total flux cleaned = -0.00531013 Jy ! Component: 950 - total flux cleaned = -0.00522006 Jy ! Component: 1000 - total flux cleaned = -0.00513254 Jy ! Component: 1050 - total flux cleaned = -0.00500435 Jy ! Component: 1100 - total flux cleaned = -0.00483629 Jy ! Component: 1150 - total flux cleaned = -0.00459188 Jy ! Component: 1200 - total flux cleaned = -0.00459141 Jy ! Component: 1250 - total flux cleaned = -0.00428043 Jy ! Component: 1300 - total flux cleaned = -0.00424299 Jy ! Component: 1350 - total flux cleaned = -0.00405633 Jy ! Component: 1400 - total flux cleaned = -0.00387389 Jy ! Component: 1450 - total flux cleaned = -0.00373202 Jy ! Component: 1500 - total flux cleaned = -0.0036274 Jy ! Component: 1550 - total flux cleaned = -0.00359281 Jy ! Component: 1600 - total flux cleaned = -0.0034912 Jy ! Component: 1650 - total flux cleaned = -0.00345762 Jy ! Component: 1700 - total flux cleaned = -0.0033591 Jy ! Component: 1750 - total flux cleaned = -0.00326325 Jy ! Component: 1800 - total flux cleaned = -0.00317014 Jy ! Component: 1850 - total flux cleaned = -0.00307789 Jy ! Component: 1900 - total flux cleaned = -0.00301746 Jy ! Component: 1950 - total flux cleaned = -0.00307694 Jy ! Component: 2000 - total flux cleaned = -0.00307682 Jy ! Component: 2050 - total flux cleaned = -0.00298912 Jy ! Component: 2100 - total flux cleaned = -0.00301787 Jy ! Component: 2150 - total flux cleaned = -0.00307481 Jy ! Component: 2200 - total flux cleaned = -0.00307488 Jy ! Component: 2250 - total flux cleaned = -0.00307464 Jy ! Component: 2300 - total flux cleaned = -0.00315762 Jy ! Component: 2350 - total flux cleaned = -0.00315763 Jy ! Component: 2400 - total flux cleaned = -0.00329399 Jy ! Component: 2450 - total flux cleaned = -0.00326674 Jy ! Component: 2500 - total flux cleaned = -0.00326695 Jy ! Component: 2550 - total flux cleaned = -0.00329371 Jy ! Component: 2600 - total flux cleaned = -0.00332045 Jy ! Component: 2650 - total flux cleaned = -0.00337383 Jy ! Component: 2700 - total flux cleaned = -0.00345401 Jy ! Component: 2750 - total flux cleaned = -0.00356102 Jy ! Component: 2800 - total flux cleaned = -0.00366797 Jy ! Component: 2850 - total flux cleaned = -0.00374856 Jy ! Component: 2900 - total flux cleaned = -0.00377578 Jy ! Component: 2950 - total flux cleaned = -0.00382988 Jy ! Component: 3000 - total flux cleaned = -0.00391133 Jy ! Component: 3050 - total flux cleaned = -0.00391167 Jy ! Component: 3100 - total flux cleaned = -0.00396639 Jy ! Component: 3150 - total flux cleaned = -0.00399392 Jy ! Component: 3200 - total flux cleaned = -0.00404925 Jy ! Component: 3250 - total flux cleaned = -0.00407718 Jy ! Component: 3300 - total flux cleaned = -0.00418991 Jy ! Component: 3350 - total flux cleaned = -0.00427547 Jy ! Component: 3400 - total flux cleaned = -0.00441952 Jy ! Component: 3450 - total flux cleaned = -0.00453604 Jy ! Component: 3500 - total flux cleaned = -0.00462477 Jy ! Component: 3550 - total flux cleaned = -0.00468491 Jy ! Component: 3600 - total flux cleaned = -0.004776 Jy ! Component: 3650 - total flux cleaned = -0.00486843 Jy ! Component: 3700 - total flux cleaned = -0.00493114 Jy ! Component: 3750 - total flux cleaned = -0.00496328 Jy ! Component: 3800 - total flux cleaned = -0.00502831 Jy ! Component: 3850 - total flux cleaned = -0.00506092 Jy ! Component: 3900 - total flux cleaned = -0.00512839 Jy ! Component: 3950 - total flux cleaned = -0.00516291 Jy ! Component: 4000 - total flux cleaned = -0.00523319 Jy ! Component: 4050 - total flux cleaned = -0.00526954 Jy ! Total flux subtracted in 4096 components = -0.00530567 Jy ! Clean residual min=-0.002635 max=0.002167 Jy/beam ! Clean residual mean=-0.000004 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.364533 Jy keep ! Adding 242 model components to the UV plane model. ! The established model now contains 328 components and 0.364533 Jy ![Exited script file: muppet] wmap "J0011-2612_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 16.15 at -26.61 degrees (North through East) ! Clean map min=-0.0049189 max=0.32282 Jy/beam ! Writing clean map to FITS file: J0011-2612_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.322821 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000537349 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.499362 0.499362 0.998725 1.99745 3.9949 7.9898 15.9796 31.9592 63.9184 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.322 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.303 x 16.15 at -26.61 degrees (North through East) ! Clean map min=-0.0049189 max=0.32282 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0011-2612_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:01:39 2019