! Started logfile: J0011-2612_S_2017_08_12_pus_uvs.log on Fri May 10 14:48:48 2019 obs J0011-2612_S_2017_08_12_pus_uva.fits ! Reading UV FITS file: J0011-2612_S_2017_08_12_pus_uva.fits ! AN table 1: 13 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.206838 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0011-2612 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 594 lines of history. ! ! Reading 484 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0011-2612_S_2017_08_12_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.645030Jy sigma=0.004817 ! Fit after self-cal, rms=0.645235Jy sigma=0.004816 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.458 mas, bmaj=28.45 mas, bpa=-6.149 degrees ! Estimated noise=5561.99 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.274834 Jy ! Component: 100 - total flux cleaned = 0.336312 Jy ! Total flux subtracted in 100 components = 0.336312 Jy ! Clean residual min=-0.018651 max=0.022135 Jy/beam ! Clean residual mean=0.001981 rms=0.006809 Jy/beam ! Combined flux in latest and established models = 0.336312 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.336312 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092846Jy sigma=0.000659 ! Fit after self-cal, rms=0.092829Jy sigma=0.000659 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.67 mas, bmaj=30.32 mas, bpa=-5.841 degrees ! Estimated noise=5065.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203207 Jy ! Component: 100 - total flux cleaned = 0.0237394 Jy ! Component: 150 - total flux cleaned = 0.0257604 Jy ! Component: 200 - total flux cleaned = 0.0271885 Jy ! Total flux subtracted in 200 components = 0.0271885 Jy ! Clean residual min=-0.005825 max=0.005954 Jy/beam ! Clean residual mean=0.000990 rms=0.002133 Jy/beam ! Combined flux in latest and established models = 0.3635 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 69 components and 0.3635 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084066Jy sigma=0.000602 ! Fit after self-cal, rms=0.083777Jy sigma=0.000600 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.00 ! LA 0.99 MK 1.01 NL 1.00* OV 1.04 ! PT 0.99 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 1.01 ! LA 0.99 MK 1.00 NL 1.00* OV 1.03 ! PT 1.00 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.00* HN 1.00* KP 0.97 ! LA 0.94 MK 1.06 NL 1.00* OV 0.99 ! PT 0.96 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Fit before self-cal, rms=0.083777Jy sigma=0.000600 ! Fit after self-cal, rms=0.081772Jy sigma=0.000592 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=30.52 mas, bpa=-5.79 degrees ! Estimated noise=5053.15 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165929 Jy ! Component: 100 - total flux cleaned = 0.00103094 Jy ! Component: 150 - total flux cleaned = 0.000692339 Jy ! Component: 200 - total flux cleaned = 0.000674407 Jy ! Total flux subtracted in 200 components = 0.000674407 Jy ! Clean residual min=-0.004070 max=0.004168 Jy/beam ! Clean residual mean=0.000209 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.364174 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 117 components and 0.364175 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081549Jy sigma=0.000590 ! Fit after self-cal, rms=0.081495Jy sigma=0.000590 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081495Jy sigma=0.000590 ! Fit after self-cal, rms=0.081360Jy sigma=0.000589 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=30.54 mas, bpa=-5.786 degrees ! Estimated noise=5047.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00128832 Jy ! Component: 100 - total flux cleaned = -0.00191067 Jy ! Component: 150 - total flux cleaned = -0.00182003 Jy ! Component: 200 - total flux cleaned = -0.0017134 Jy ! Total flux subtracted in 200 components = -0.0017134 Jy ! Clean residual min=-0.001883 max=0.001933 Jy/beam ! Clean residual mean=0.000025 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.362461 Jy selfcal ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 152 components and 0.362461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081238Jy sigma=0.000588 ! Fit after self-cal, rms=0.081195Jy sigma=0.000588 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00125111 Jy ! Component: 100 - total flux cleaned = 0.00229735 Jy ! Component: 150 - total flux cleaned = 0.00276288 Jy ! Component: 200 - total flux cleaned = 0.00281834 Jy ! Total flux subtracted in 200 components = 0.00281834 Jy ! Clean residual min=-0.000958 max=0.000988 Jy/beam ! Clean residual mean=0.000005 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.365279 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 191 components and 0.365279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081114Jy sigma=0.000587 ! Fit after self-cal, rms=0.081106Jy sigma=0.000587 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081106Jy sigma=0.000587 ! Fit after self-cal, rms=0.081167Jy sigma=0.000587 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.697 mas, bmaj=30.51 mas, bpa=-5.787 degrees ! Estimated noise=5049.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000983476 Jy ! Component: 100 - total flux cleaned = -0.00115508 Jy ! Component: 150 - total flux cleaned = -0.00122418 Jy ! Component: 200 - total flux cleaned = -0.0013184 Jy ! Total flux subtracted in 200 components = -0.0013184 Jy ! Clean residual min=-0.002289 max=0.002371 Jy/beam ! Clean residual mean=0.000006 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 0.363961 Jy selfcal ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 239 components and 0.363961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081141Jy sigma=0.000587 ! Fit after self-cal, rms=0.081132Jy sigma=0.000587 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000943752 Jy ! Component: 100 - total flux cleaned = -0.00115513 Jy ! Component: 150 - total flux cleaned = -0.00137859 Jy ! Component: 200 - total flux cleaned = -0.00172762 Jy ! Total flux subtracted in 200 components = -0.00172762 Jy ! Clean residual min=-0.000742 max=0.000746 Jy/beam ! Clean residual mean=0.000005 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.362233 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 273 components and 0.362233 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081072Jy sigma=0.000586 ! Fit after self-cal, rms=0.081069Jy sigma=0.000586 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081069Jy sigma=0.000586 ! Fit after self-cal, rms=0.081162Jy sigma=0.000586 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.864 mas, bmaj=29.69 mas, bpa=1.367 degrees ! Estimated noise=6487.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.3173e-05 Jy ! Component: 100 - total flux cleaned = -4.36628e-05 Jy ! Component: 150 - total flux cleaned = -4.5621e-05 Jy ! Component: 200 - total flux cleaned = -3.58e-05 Jy ! Total flux subtracted in 200 components = -3.58e-05 Jy ! Clean residual min=-0.002476 max=0.002383 Jy/beam ! Clean residual mean=0.000015 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.362198 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 302 components and 0.362198 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081156Jy sigma=0.000586 ! Fit after self-cal, rms=0.081149Jy sigma=0.000586 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223557 Jy ! Component: 100 - total flux cleaned = 0.0001421 Jy ! Component: 150 - total flux cleaned = 0.000162405 Jy ! Component: 200 - total flux cleaned = 0.000231547 Jy ! Total flux subtracted in 200 components = 0.000231547 Jy ! Clean residual min=-0.006902 max=0.006546 Jy/beam ! Clean residual mean=0.000028 rms=0.000953 Jy/beam ! Combined flux in latest and established models = 0.362429 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 339 components and 0.362429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081244Jy sigma=0.000587 ! Fit after self-cal, rms=0.081204Jy sigma=0.000587 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.697 mas, bmaj=30.5 mas, bpa=-5.787 degrees ! Estimated noise=5053.42 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.697 x 30.5 at -5.787 degrees (North through East) ! Clean map min=-0.012751 max=0.32247 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.479 mas, bmaj=28.56 mas, bpa=-6.081 degrees ! Estimated noise=5578.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.27544 Jy ! Component: 100 - total flux cleaned = 0.335437 Jy ! Component: 150 - total flux cleaned = 0.342253 Jy ! Component: 200 - total flux cleaned = 0.345941 Jy ! Total flux subtracted in 200 components = 0.345941 Jy ! Clean residual min=-0.008911 max=0.009256 Jy/beam ! Clean residual mean=0.000727 rms=0.002862 Jy/beam ! Combined flux in latest and established models = 0.345941 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 36 model components to the UV plane model. ! The established model now contains 36 components and 0.345941 Jy ! Inverting map and beam ! Estimated beam: bmin=3.697 mas, bmaj=30.5 mas, bpa=-5.787 degrees ! Estimated noise=5053.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00751111 Jy ! Component: 100 - total flux cleaned = 0.0103056 Jy ! Component: 150 - total flux cleaned = 0.0123551 Jy ! Component: 200 - total flux cleaned = 0.0136219 Jy ! Total flux subtracted in 200 components = 0.0136219 Jy ! Clean residual min=-0.003574 max=0.003484 Jy/beam ! Clean residual mean=0.000457 rms=0.001206 Jy/beam ! Combined flux in latest and established models = 0.359563 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 102 components and 0.359563 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.864 mas, bmaj=29.69 mas, bpa=1.367 degrees ! Estimated noise=6487.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016932 Jy ! Component: 100 - total flux cleaned = 0.00164028 Jy ! Component: 150 - total flux cleaned = 0.00164072 Jy ! Component: 200 - total flux cleaned = 0.00143673 Jy ! Total flux subtracted in 200 components = 0.00143673 Jy ! Clean residual min=-0.005424 max=0.005753 Jy/beam ! Clean residual mean=0.000337 rms=0.001180 Jy/beam ! Combined flux in latest and established models = 0.361 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (127, -128). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00414287 Jy ! Component: 100 - total flux cleaned = 0.00415061 Jy ! Component: 150 - total flux cleaned = 0.00417485 Jy ! Component: 200 - total flux cleaned = 0.00420957 Jy ! Total flux subtracted in 200 components = 0.00420957 Jy ! Clean residual min=-0.020206 max=0.006147 Jy/beam ! Clean residual mean=-0.000126 rms=0.002392 Jy/beam ! Combined flux in latest and established models = 0.365209 Jy ! Adding 69 model components to the UV plane model. ! The established model now contains 171 components and 0.365209 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.697 mas, bmaj=30.5 mas, bpa=-5.787 degrees ! Estimated noise=5053.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0035163 Jy ! Component: 100 - total flux cleaned = -0.00490002 Jy ! Component: 150 - total flux cleaned = -0.00550088 Jy ! Component: 200 - total flux cleaned = -0.00556234 Jy ! Total flux subtracted in 200 components = -0.00556234 Jy ! Clean residual min=-0.004634 max=0.004697 Jy/beam ! Clean residual mean=0.000225 rms=0.000870 Jy/beam ! Combined flux in latest and established models = 0.359647 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 188 components and 0.359647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081513Jy sigma=0.000589 ! Fit after self-cal, rms=0.081481Jy sigma=0.000589 wmodel J0011-2612_S_2017_08_12_pus_map.mod ! Writing 188 model components to file: J0011-2612_S_2017_08_12_pus_map.mod wobs J0011-2612_S_2017_08_12_pus_uvs.fits ! Writing UV FITS file: J0011-2612_S_2017_08_12_pus_uvs.fits wwins J0011-2612_S_2017_08_12_pus_map.win ! wwins: Wrote 1 windows to J0011-2612_S_2017_08_12_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159481 Jy ! Component: 100 - total flux cleaned = -0.0026775 Jy ! Component: 150 - total flux cleaned = -0.00344633 Jy ! Component: 200 - total flux cleaned = -0.00387239 Jy ! Component: 250 - total flux cleaned = -0.00392897 Jy ! Component: 300 - total flux cleaned = -0.00387703 Jy ! Component: 350 - total flux cleaned = -0.00395128 Jy ! Component: 400 - total flux cleaned = -0.00416995 Jy ! Component: 450 - total flux cleaned = -0.00433948 Jy ! Component: 500 - total flux cleaned = -0.00451304 Jy ! Component: 550 - total flux cleaned = -0.00469201 Jy ! Component: 600 - total flux cleaned = -0.004903 Jy ! Component: 650 - total flux cleaned = -0.00506631 Jy ! Component: 700 - total flux cleaned = -0.00526316 Jy ! Component: 750 - total flux cleaned = -0.00540839 Jy ! Component: 800 - total flux cleaned = -0.00561858 Jy ! Component: 850 - total flux cleaned = -0.00580469 Jy ! Component: 900 - total flux cleaned = -0.00599671 Jy ! Component: 950 - total flux cleaned = -0.00616234 Jy ! Component: 1000 - total flux cleaned = -0.00626371 Jy ! Component: 1050 - total flux cleaned = -0.00629894 Jy ! Component: 1100 - total flux cleaned = -0.00629958 Jy ! Component: 1150 - total flux cleaned = -0.00629874 Jy ! Component: 1200 - total flux cleaned = -0.00629854 Jy ! Component: 1250 - total flux cleaned = -0.00629919 Jy ! Component: 1300 - total flux cleaned = -0.00625529 Jy ! Component: 1350 - total flux cleaned = -0.0062559 Jy ! Component: 1400 - total flux cleaned = -0.00625889 Jy ! Component: 1450 - total flux cleaned = -0.00626271 Jy ! Component: 1500 - total flux cleaned = -0.00626628 Jy ! Component: 1550 - total flux cleaned = -0.00626963 Jy ! Component: 1600 - total flux cleaned = -0.00627285 Jy ! Component: 1650 - total flux cleaned = -0.00627657 Jy ! Component: 1700 - total flux cleaned = -0.00627892 Jy ! Component: 1750 - total flux cleaned = -0.00637126 Jy ! Component: 1800 - total flux cleaned = -0.00657981 Jy ! Component: 1850 - total flux cleaned = -0.00669361 Jy ! Component: 1900 - total flux cleaned = -0.00694931 Jy ! Component: 1950 - total flux cleaned = -0.00709226 Jy ! Component: 2000 - total flux cleaned = -0.00724566 Jy ! Component: 2050 - total flux cleaned = -0.00742641 Jy ! Component: 2100 - total flux cleaned = -0.00763885 Jy ! Component: 2150 - total flux cleaned = -0.00764159 Jy ! Component: 2200 - total flux cleaned = -0.00791518 Jy ! Component: 2250 - total flux cleaned = -0.00791338 Jy ! Component: 2300 - total flux cleaned = -0.0082574 Jy ! Component: 2350 - total flux cleaned = -0.00868089 Jy ! Component: 2400 - total flux cleaned = -0.0086971 Jy ! Component: 2450 - total flux cleaned = -0.00923745 Jy ! Component: 2500 - total flux cleaned = -0.00924044 Jy ! Component: 2550 - total flux cleaned = -0.00996119 Jy ! Component: 2600 - total flux cleaned = -0.00995448 Jy ! Component: 2650 - total flux cleaned = -0.0108722 Jy ! Component: 2700 - total flux cleaned = -0.011958 Jy ! Component: 2750 - total flux cleaned = -0.0132673 Jy ! Component: 2800 - total flux cleaned = -0.0132644 Jy ! Component: 2850 - total flux cleaned = -0.0149698 Jy ! Component: 2900 - total flux cleaned = -0.0169109 Jy ! Component: 2950 - total flux cleaned = -0.0192695 Jy ! Component: 3000 - total flux cleaned = -0.0193487 Jy ! Component: 3050 - total flux cleaned = -0.0223819 Jy ! Component: 3100 - total flux cleaned = -0.0222854 Jy ! Component: 3150 - total flux cleaned = -0.0259064 Jy ! Component: 3200 - total flux cleaned = -0.0303724 Jy ! Component: 3250 - total flux cleaned = -0.0357416 Jy ! Component: 3300 - total flux cleaned = -0.0358102 Jy ! Component: 3350 - total flux cleaned = -0.0355481 Jy ! Component: 3400 - total flux cleaned = -0.0435766 Jy ! Component: 3450 - total flux cleaned = -0.0439879 Jy ! Component: 3500 - total flux cleaned = -0.0439004 Jy ! Component: 3550 - total flux cleaned = -0.0433927 Jy ! Component: 3600 - total flux cleaned = -0.0573798 Jy ! Component: 3650 - total flux cleaned = -0.0572077 Jy ! Component: 3700 - total flux cleaned = -0.0563869 Jy ! Component: 3750 - total flux cleaned = -0.0779756 Jy ! Component: 3800 - total flux cleaned = -0.0780862 Jy ! Component: 3850 - total flux cleaned = -0.0772241 Jy ! Component: 3900 - total flux cleaned = -0.0767144 Jy ! Component: 3950 - total flux cleaned = -0.115556 Jy ! Component: 4000 - total flux cleaned = -0.118053 Jy ! Component: 4050 - total flux cleaned = -0.119321 Jy ! Total flux subtracted in 4096 components = -0.180518 Jy ! Clean residual min=-3.074486 max=4.353212 Jy/beam ! Clean residual mean=0.006993 rms=0.876523 Jy/beam ! Combined flux in latest and established models = 0.179129 Jy keep ! Adding 140 model components to the UV plane model. ! The established model now contains 323 components and 0.179129 Jy ![Exited script file: muppet] wmap "J0011-2612_S_2017_08_12_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.697 x 30.5 at -5.787 degrees (North through East) ! Clean map min=-2.944 max=2.9955 Jy/beam ! Writing clean map to FITS file: J0011-2612_S_2017_08_12_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 2.99549 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.930262 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -93.1662 93.1662 print "clev=",int(3*image_rms*10000)/10000 ! clev= 2.7907 print "peak=",int(1000*peak_flux)/1000 ! peak= 2.995 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.697 x 30.5 at -5.787 degrees (North through East) ! Clean map min=-2.944 max=2.9955 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0011-2612_S_2017_08_12_pus_uvs.log closed on Fri May 10 14:48:53 2019