! Started logfile: J0011-2612_S_2017_06_10_pus_uvs.log on Mon May 6 14:39:15 2019 obs J0011-2612_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0011-2612_S_2017_06_10_pus_uva.fits ! AN table 1: 61 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.55592 visibilities/baseline/integration-bin. ! Found source: J0011-2612 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 6104 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0011-2612_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 304 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 304 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 232 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 486 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.696268Jy sigma=0.005175 ! Fit after self-cal, rms=0.676873Jy sigma=0.005028 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.472 mas, bmaj=6.871 mas, bpa=-6.676 degrees ! Estimated noise=1940.95 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.249978 Jy ! Component: 100 - total flux cleaned = 0.305597 Jy ! Total flux subtracted in 100 components = 0.305597 Jy ! Clean residual min=-0.012796 max=0.027265 Jy/beam ! Clean residual mean=-0.000075 rms=0.003667 Jy/beam ! Combined flux in latest and established models = 0.305597 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.305597 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114779Jy sigma=0.000822 ! Fit after self-cal, rms=0.114781Jy sigma=0.000822 ! Inverting map ! Added new window around map position (-3.5, 8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0258313 Jy ! Component: 100 - total flux cleaned = 0.0409046 Jy ! Total flux subtracted in 100 components = 0.0409046 Jy ! Clean residual min=-0.011302 max=0.022483 Jy/beam ! Clean residual mean=-0.000043 rms=0.003051 Jy/beam ! Combined flux in latest and established models = 0.346501 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 0.346501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107504Jy sigma=0.000757 ! Fit after self-cal, rms=0.106893Jy sigma=0.000752 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.938 mas, bmaj=7.834 mas, bpa=-6.606 degrees ! Estimated noise=1496.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3.5, -7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0195203 Jy ! Component: 100 - total flux cleaned = 0.0303337 Jy ! Component: 150 - total flux cleaned = 0.0372374 Jy ! Component: 200 - total flux cleaned = 0.0420649 Jy ! Total flux subtracted in 200 components = 0.0420649 Jy ! Clean residual min=-0.007660 max=0.009939 Jy/beam ! Clean residual mean=-0.000009 rms=0.002056 Jy/beam ! Combined flux in latest and established models = 0.388566 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 56 components and 0.388566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103189Jy sigma=0.000722 ! Fit after self-cal, rms=0.103174Jy sigma=0.000722 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.90 HN 1.08 KP 1.03 ! LA 1.05 MK 1.02 NL 0.93 OV 0.97 ! PT 1.03 SC 0.96 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.95 HN 1.09 KP 1.02 ! LA 0.96 MK 0.98 NL 1.06 OV 1.00 ! PT 1.00 SC 1.01 ! ! ! Correcting IF 3. ! A total of 36 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.34 FD 1.00 HN 1.06 KP 1.00 ! LA 0.96 MK 1.00 NL 1.00 OV 0.89 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.03 HN 1.21 KP 1.00* ! LA 1.00* MK 1.04 NL 1.00* OV 1.00* ! PT 0.95 SC 1.00* ! ! ! Fit before self-cal, rms=0.103174Jy sigma=0.000722 ! Fit after self-cal, rms=0.106390Jy sigma=0.000695 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.944 mas, bmaj=7.867 mas, bpa=-6.004 degrees ! Estimated noise=1509.33 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0032018 Jy ! Component: 100 - total flux cleaned = -0.00410302 Jy ! Component: 150 - total flux cleaned = -0.00454711 Jy ! Component: 200 - total flux cleaned = -0.00485111 Jy ! Total flux subtracted in 200 components = -0.00485111 Jy ! Clean residual min=-0.006146 max=0.007809 Jy/beam ! Clean residual mean=-0.000007 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.383715 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 72 components and 0.383715 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106093Jy sigma=0.000692 ! Fit after self-cal, rms=0.106192Jy sigma=0.000692 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106192Jy sigma=0.000692 ! Fit after self-cal, rms=0.106136Jy sigma=0.000679 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.839 mas, bpa=-6.064 degrees ! Estimated noise=1511.44 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00123859 Jy ! Component: 100 - total flux cleaned = -0.00176819 Jy ! Component: 150 - total flux cleaned = -0.00194412 Jy ! Component: 200 - total flux cleaned = -0.00210132 Jy ! Total flux subtracted in 200 components = -0.00210132 Jy ! Clean residual min=-0.005273 max=0.006163 Jy/beam ! Clean residual mean=0.000003 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.381614 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 88 components and 0.381614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105945Jy sigma=0.000677 ! Fit after self-cal, rms=0.105958Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (63.5, 122). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00517716 Jy ! Component: 100 - total flux cleaned = 0.00519342 Jy ! Component: 150 - total flux cleaned = 0.00510099 Jy ! Component: 200 - total flux cleaned = 0.00518074 Jy ! Total flux subtracted in 200 components = 0.00518074 Jy ! Clean residual min=-0.005508 max=0.005391 Jy/beam ! Clean residual mean=0.000000 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 0.386795 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 115 components and 0.386795 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105505Jy sigma=0.000675 ! Fit after self-cal, rms=0.105473Jy sigma=0.000675 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105473Jy sigma=0.000675 ! Fit after self-cal, rms=0.103199Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.941 mas, bmaj=7.831 mas, bpa=-6.125 degrees ! Estimated noise=1508.96 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00111782 Jy ! Component: 100 - total flux cleaned = -0.00128621 Jy ! Component: 150 - total flux cleaned = -0.00136002 Jy ! Component: 200 - total flux cleaned = -0.00143224 Jy ! Total flux subtracted in 200 components = -0.00143224 Jy ! Clean residual min=-0.004029 max=0.004491 Jy/beam ! Clean residual mean=0.000011 rms=0.000972 Jy/beam ! Combined flux in latest and established models = 0.385362 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 128 components and 0.385362 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103043Jy sigma=0.000655 ! Fit after self-cal, rms=0.103068Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-124.5, 52). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00288106 Jy ! Component: 100 - total flux cleaned = 0.00297734 Jy ! Component: 150 - total flux cleaned = 0.00320562 Jy ! Component: 200 - total flux cleaned = 0.00334479 Jy ! Total flux subtracted in 200 components = 0.00334479 Jy ! Clean residual min=-0.003921 max=0.003899 Jy/beam ! Clean residual mean=0.000005 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.388707 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 144 components and 0.388707 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102850Jy sigma=0.000653 ! Fit after self-cal, rms=0.102834Jy sigma=0.000653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102834Jy sigma=0.000653 ! Fit after self-cal, rms=0.103064Jy sigma=0.000653 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.577 mas, bmaj=19.16 mas, bpa=-2.538 degrees ! Estimated noise=1965.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000676659 Jy ! Component: 100 - total flux cleaned = -0.00082847 Jy ! Component: 150 - total flux cleaned = -0.00103247 Jy ! Component: 200 - total flux cleaned = -0.00132725 Jy ! Total flux subtracted in 200 components = -0.00132725 Jy ! Clean residual min=-0.004424 max=0.003743 Jy/beam ! Clean residual mean=0.000011 rms=0.001216 Jy/beam ! Combined flux in latest and established models = 0.38738 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 159 components and 0.38738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103005Jy sigma=0.000653 ! Fit after self-cal, rms=0.102988Jy sigma=0.000652 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.57721e-05 Jy ! Component: 100 - total flux cleaned = -0.000150593 Jy ! Component: 150 - total flux cleaned = -0.000201249 Jy ! Component: 200 - total flux cleaned = -0.000295796 Jy ! Total flux subtracted in 200 components = -0.000295796 Jy ! Clean residual min=-0.004350 max=0.003727 Jy/beam ! Clean residual mean=0.000011 rms=0.001195 Jy/beam ! Combined flux in latest and established models = 0.387084 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 167 components and 0.387084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102970Jy sigma=0.000652 ! Fit after self-cal, rms=0.102961Jy sigma=0.000652 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=7.831 mas, bpa=-6.116 degrees ! Estimated noise=1505.78 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.939 x 7.831 at -6.116 degrees (North through East) ! Clean map min=-0.0037573 max=0.3125 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.464 mas, bmaj=6.82 mas, bpa=-6.289 degrees ! Estimated noise=1997.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.254617 Jy ! Component: 100 - total flux cleaned = 0.311628 Jy ! Component: 150 - total flux cleaned = 0.333131 Jy ! Component: 200 - total flux cleaned = 0.34515 Jy ! Total flux subtracted in 200 components = 0.34515 Jy ! Clean residual min=-0.006503 max=0.007455 Jy/beam ! Clean residual mean=-0.000016 rms=0.001557 Jy/beam ! Combined flux in latest and established models = 0.34515 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.34515 Jy ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=7.831 mas, bpa=-6.116 degrees ! Estimated noise=1505.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011781 Jy ! Component: 100 - total flux cleaned = 0.0190593 Jy ! Component: 150 - total flux cleaned = 0.0245728 Jy ! Component: 200 - total flux cleaned = 0.0289285 Jy ! Total flux subtracted in 200 components = 0.0289285 Jy ! Clean residual min=-0.003888 max=0.004415 Jy/beam ! Clean residual mean=0.000001 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.374079 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 72 components and 0.374079 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.577 mas, bmaj=19.16 mas, bpa=-2.538 degrees ! Estimated noise=1965.23 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00539926 Jy ! Component: 100 - total flux cleaned = 0.0085924 Jy ! Component: 150 - total flux cleaned = 0.0102591 Jy ! Component: 200 - total flux cleaned = 0.0111224 Jy ! Total flux subtracted in 200 components = 0.0111224 Jy ! Clean residual min=-0.004151 max=0.003528 Jy/beam ! Clean residual mean=0.000007 rms=0.001209 Jy/beam ! Combined flux in latest and established models = 0.385201 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186637 Jy ! Component: 100 - total flux cleaned = 0.00035342 Jy ! Component: 150 - total flux cleaned = 0.000453504 Jy ! Component: 200 - total flux cleaned = 0.000589021 Jy ! Total flux subtracted in 200 components = 0.000589021 Jy ! Clean residual min=-0.004057 max=0.003416 Jy/beam ! Clean residual mean=0.000011 rms=0.001184 Jy/beam ! Combined flux in latest and established models = 0.38579 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 114 components and 0.38579 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.939 mas, bmaj=7.831 mas, bpa=-6.116 degrees ! Estimated noise=1505.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.72547e-05 Jy ! Component: 100 - total flux cleaned = 0.000156714 Jy ! Component: 150 - total flux cleaned = 7.83368e-05 Jy ! Component: 200 - total flux cleaned = 0.000285718 Jy ! Total flux subtracted in 200 components = 0.000285718 Jy ! Clean residual min=-0.003620 max=0.003932 Jy/beam ! Clean residual mean=0.000005 rms=0.000905 Jy/beam ! Combined flux in latest and established models = 0.386076 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 136 components and 0.386076 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102931Jy sigma=0.000652 ! Fit after self-cal, rms=0.102905Jy sigma=0.000652 wmodel J0011-2612_S_2017_06_10_pus_map.mod ! Writing 136 model components to file: J0011-2612_S_2017_06_10_pus_map.mod wobs J0011-2612_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0011-2612_S_2017_06_10_pus_uvs.fits wwins J0011-2612_S_2017_06_10_pus_map.win ! wwins: Wrote 5 windows to J0011-2612_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000590066 Jy ! Component: 100 - total flux cleaned = 0.000591829 Jy ! Component: 150 - total flux cleaned = 0.00065321 Jy ! Component: 200 - total flux cleaned = 0.000711208 Jy ! Component: 250 - total flux cleaned = 0.00104087 Jy ! Component: 300 - total flux cleaned = 0.00114703 Jy ! Component: 350 - total flux cleaned = 0.00145695 Jy ! Component: 400 - total flux cleaned = 0.0018579 Jy ! Component: 450 - total flux cleaned = 0.0021518 Jy ! Component: 500 - total flux cleaned = 0.00248921 Jy ! Component: 550 - total flux cleaned = 0.00286698 Jy ! Component: 600 - total flux cleaned = 0.00314468 Jy ! Component: 650 - total flux cleaned = 0.0034621 Jy ! Component: 700 - total flux cleaned = 0.0038188 Jy ! Component: 750 - total flux cleaned = 0.00403797 Jy ! Component: 800 - total flux cleaned = 0.00451262 Jy ! Component: 850 - total flux cleaned = 0.00468198 Jy ! Component: 900 - total flux cleaned = 0.00514306 Jy ! Component: 950 - total flux cleaned = 0.00551447 Jy ! Component: 1000 - total flux cleaned = 0.00588007 Jy ! Component: 1050 - total flux cleaned = 0.00612039 Jy ! Component: 1100 - total flux cleaned = 0.00643631 Jy ! Component: 1150 - total flux cleaned = 0.0065535 Jy ! Component: 1200 - total flux cleaned = 0.00693747 Jy ! Component: 1250 - total flux cleaned = 0.00716541 Jy ! Component: 1300 - total flux cleaned = 0.0074649 Jy ! Component: 1350 - total flux cleaned = 0.00772331 Jy ! Component: 1400 - total flux cleaned = 0.00801538 Jy ! Component: 1450 - total flux cleaned = 0.00823171 Jy ! Component: 1500 - total flux cleaned = 0.00844485 Jy ! Component: 1550 - total flux cleaned = 0.00876162 Jy ! Component: 1600 - total flux cleaned = 0.0090053 Jy ! Component: 1650 - total flux cleaned = 0.00928129 Jy ! Component: 1700 - total flux cleaned = 0.00951925 Jy ! Component: 1750 - total flux cleaned = 0.00978883 Jy ! Component: 1800 - total flux cleaned = 0.00995503 Jy ! Component: 1850 - total flux cleaned = 0.0101858 Jy ! Component: 1900 - total flux cleaned = 0.0104797 Jy ! Component: 1950 - total flux cleaned = 0.010674 Jy ! Component: 2000 - total flux cleaned = 0.0109618 Jy ! Component: 2050 - total flux cleaned = 0.0112155 Jy ! Component: 2100 - total flux cleaned = 0.0114668 Jy ! Component: 2150 - total flux cleaned = 0.0117154 Jy ! Component: 2200 - total flux cleaned = 0.0119002 Jy ! Component: 2250 - total flux cleaned = 0.0119918 Jy ! Component: 2300 - total flux cleaned = 0.0122347 Jy ! Component: 2350 - total flux cleaned = 0.012445 Jy ! Component: 2400 - total flux cleaned = 0.0126237 Jy ! Component: 2450 - total flux cleaned = 0.012683 Jy ! Component: 2500 - total flux cleaned = 0.0129172 Jy ! Component: 2550 - total flux cleaned = 0.0131205 Jy ! Component: 2600 - total flux cleaned = 0.0132647 Jy ! Component: 2650 - total flux cleaned = 0.0133792 Jy ! Component: 2700 - total flux cleaned = 0.0136635 Jy ! Component: 2750 - total flux cleaned = 0.0138044 Jy ! Component: 2800 - total flux cleaned = 0.014 Jy ! Component: 2850 - total flux cleaned = 0.0141107 Jy ! Component: 2900 - total flux cleaned = 0.014221 Jy ! Component: 2950 - total flux cleaned = 0.0142213 Jy ! Component: 3000 - total flux cleaned = 0.0144659 Jy ! Component: 3050 - total flux cleaned = 0.014385 Jy ! Component: 3100 - total flux cleaned = 0.0146802 Jy ! Component: 3150 - total flux cleaned = 0.0146805 Jy ! Component: 3200 - total flux cleaned = 0.0149186 Jy ! Component: 3250 - total flux cleaned = 0.0149973 Jy ! Component: 3300 - total flux cleaned = 0.014971 Jy ! Component: 3350 - total flux cleaned = 0.0151008 Jy ! Component: 3400 - total flux cleaned = 0.015075 Jy ! Component: 3450 - total flux cleaned = 0.0151265 Jy ! Component: 3500 - total flux cleaned = 0.0151779 Jy ! Component: 3550 - total flux cleaned = 0.0153045 Jy ! Component: 3600 - total flux cleaned = 0.0152794 Jy ! Component: 3650 - total flux cleaned = 0.0154045 Jy ! Component: 3700 - total flux cleaned = 0.0153549 Jy ! Component: 3750 - total flux cleaned = 0.0154786 Jy ! Component: 3800 - total flux cleaned = 0.0154784 Jy ! Component: 3850 - total flux cleaned = 0.0156007 Jy ! Component: 3900 - total flux cleaned = 0.0156005 Jy ! Component: 3950 - total flux cleaned = 0.0157213 Jy ! Component: 4000 - total flux cleaned = 0.0157215 Jy ! Component: 4050 - total flux cleaned = 0.0158651 Jy ! Total flux subtracted in 4096 components = 0.0158887 Jy ! Clean residual min=-0.001568 max=0.001308 Jy/beam ! Clean residual mean=0.000007 rms=0.000438 Jy/beam ! Combined flux in latest and established models = 0.401965 Jy keep ! Adding 300 model components to the UV plane model. ! The established model now contains 435 components and 0.401965 Jy ![Exited script file: muppet] wmap "J0011-2612_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.939 x 7.831 at -6.116 degrees (North through East) ! Clean map min=-0.0022634 max=0.32279 Jy/beam ! Writing clean map to FITS file: J0011-2612_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.322791 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000432517 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.40198 0.40198 0.803959 1.60792 3.21584 6.43167 12.8633 25.7267 51.4534 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.322 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.939 x 7.831 at -6.116 degrees (North through East) ! Clean map min=-0.0022634 max=0.32279 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0011-2612_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:39:21 2019