! Started logfile: J0011-2612_S_2017_05_27_pus_uvs.log on Fri May 3 10:52:32 2019 obs J0011-2612_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0011-2612_S_2017_05_27_pus_uva.fits ! AN table 1: 31 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.510394 visibilities/baseline/integration-bin. ! Found source: J0011-2612 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 2848 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0011-2612_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 130 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 229 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.694677Jy sigma=0.084101 ! Fit after self-cal, rms=0.696830Jy sigma=0.084250 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.919 mas, bmaj=5.894 mas, bpa=-0.6062 degrees ! Estimated noise=546.777 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490001 Jy ! Component: 100 - total flux cleaned = 0.054875 Jy ! Total flux subtracted in 100 components = 0.054875 Jy ! Clean residual min=-0.024992 max=0.043721 Jy/beam ! Clean residual mean=-0.000040 rms=0.008517 Jy/beam ! Combined flux in latest and established models = 0.054875 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.054875 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.324688Jy sigma=0.004726 ! Fit after self-cal, rms=0.324679Jy sigma=0.004724 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.528 mas, bmaj=6.965 mas, bpa=-1.247 degrees ! Estimated noise=497.971 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (45, -98.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0475069 Jy ! Component: 100 - total flux cleaned = 0.0783817 Jy ! Component: 150 - total flux cleaned = 0.0984292 Jy ! Component: 200 - total flux cleaned = 0.108507 Jy ! Total flux subtracted in 200 components = 0.108507 Jy ! Clean residual min=-0.026857 max=0.041615 Jy/beam ! Clean residual mean=-0.000191 rms=0.008742 Jy/beam ! Combined flux in latest and established models = 0.163382 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 25 components and 0.163382 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.277860Jy sigma=0.005435 ! Fit after self-cal, rms=0.272695Jy sigma=0.005397 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.49 FD 0.50 HN 0.65 KP 0.62 ! LA 0.61 MK 0.76 NL 0.48 OV 0.58 ! PT 0.66 SC 0.44 ! ! ! Correcting IF 2. ! A total of 15 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.51 HN 0.56 KP 0.60 ! LA 0.60 MK 0.77 NL 0.59 OV 0.59 ! PT 0.63 SC 0.60 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 20.44 FD 0.63 HN 0.61 KP 0.64 ! LA 0.66 MK 0.80 NL 0.60 OV 0.68 ! PT 0.66 SC 0.63 ! ! ! Correcting IF 4. ! A total of 39 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.52 HN 0.57 KP 1.00* ! LA 0.53 MK 0.93 NL 1.00* OV 1.00* ! PT 0.72 SC 1.00* ! ! ! Fit before self-cal, rms=0.272695Jy sigma=0.005397 ! Fit after self-cal, rms=0.069185Jy sigma=0.001157 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.929 mas, bmaj=7.473 mas, bpa=-1.111 degrees ! Estimated noise=875.892 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00460176 Jy ! Component: 100 - total flux cleaned = -0.0064432 Jy ! Component: 150 - total flux cleaned = -0.00743501 Jy ! Component: 200 - total flux cleaned = -0.00886738 Jy ! Total flux subtracted in 200 components = -0.00886738 Jy ! Clean residual min=-0.007264 max=0.007496 Jy/beam ! Clean residual mean=-0.000040 rms=0.001705 Jy/beam ! Combined flux in latest and established models = 0.154515 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.154515 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063158Jy sigma=0.001045 ! Fit after self-cal, rms=0.051865Jy sigma=0.000860 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051865Jy sigma=0.000860 ! Fit after self-cal, rms=0.048684Jy sigma=0.000807 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.924 mas, bmaj=7.514 mas, bpa=-1.131 degrees ! Estimated noise=867.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0051461 Jy ! Component: 100 - total flux cleaned = -0.00626744 Jy ! Component: 150 - total flux cleaned = -0.0068663 Jy ! Component: 200 - total flux cleaned = -0.00749367 Jy ! Total flux subtracted in 200 components = -0.00749367 Jy ! Clean residual min=-0.007070 max=0.004457 Jy/beam ! Clean residual mean=-0.000038 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 0.147021 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 53 components and 0.147021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.045833Jy sigma=0.000750 ! Fit after self-cal, rms=0.045372Jy sigma=0.000740 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00217022 Jy ! Component: 100 - total flux cleaned = -0.0026132 Jy ! Component: 150 - total flux cleaned = -0.00280154 Jy ! Component: 200 - total flux cleaned = -0.00306125 Jy ! Total flux subtracted in 200 components = -0.00306125 Jy ! Clean residual min=-0.006287 max=0.004642 Jy/beam ! Clean residual mean=-0.000038 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.14396 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 0.14396 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044564Jy sigma=0.000724 ! Fit after self-cal, rms=0.044415Jy sigma=0.000720 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044415Jy sigma=0.000720 ! Fit after self-cal, rms=0.044058Jy sigma=0.000697 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.918 mas, bmaj=7.512 mas, bpa=-1.142 degrees ! Estimated noise=866.076 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00327118 Jy ! Component: 100 - total flux cleaned = -0.00347795 Jy ! Component: 150 - total flux cleaned = -0.00332045 Jy ! Component: 200 - total flux cleaned = -0.00338086 Jy ! Total flux subtracted in 200 components = -0.00338086 Jy ! Clean residual min=-0.004504 max=0.003554 Jy/beam ! Clean residual mean=-0.000026 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.140579 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.140579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043550Jy sigma=0.000686 ! Fit after self-cal, rms=0.043498Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00110151 Jy ! Component: 100 - total flux cleaned = -0.000849454 Jy ! Component: 150 - total flux cleaned = -0.000795338 Jy ! Component: 200 - total flux cleaned = -0.000745004 Jy ! Total flux subtracted in 200 components = -0.000745004 Jy ! Clean residual min=-0.003963 max=0.003211 Jy/beam ! Clean residual mean=-0.000026 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.139834 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 76 components and 0.139834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043331Jy sigma=0.000680 ! Fit after self-cal, rms=0.043305Jy sigma=0.000679 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043305Jy sigma=0.000679 ! Fit after self-cal, rms=0.043970Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.462 mas, bmaj=20.32 mas, bpa=-2.087 degrees ! Estimated noise=1126.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00150612 Jy ! Component: 100 - total flux cleaned = -0.00129661 Jy ! Component: 150 - total flux cleaned = -0.00118311 Jy ! Component: 200 - total flux cleaned = -0.00104672 Jy ! Total flux subtracted in 200 components = -0.00104672 Jy ! Clean residual min=-0.004494 max=0.003586 Jy/beam ! Clean residual mean=-0.000041 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.138787 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 89 components and 0.138787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043869Jy sigma=0.000674 ! Fit after self-cal, rms=0.043852Jy sigma=0.000673 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000232049 Jy ! Component: 100 - total flux cleaned = -0.000144586 Jy ! Component: 150 - total flux cleaned = -3.66355e-05 Jy ! Component: 200 - total flux cleaned = 4.74561e-05 Jy ! Total flux subtracted in 200 components = 4.74561e-05 Jy ! Clean residual min=-0.004017 max=0.003407 Jy/beam ! Clean residual mean=-0.000040 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.138835 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 97 components and 0.138835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043841Jy sigma=0.000673 ! Fit after self-cal, rms=0.043825Jy sigma=0.000672 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=7.497 mas, bpa=-1.194 degrees ! Estimated noise=864.942 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.912 x 7.497 at -1.194 degrees (North through East) ! Clean map min=-0.005953 max=0.11779 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.466 mas, bmaj=6.578 mas, bpa=-3.84 degrees ! Estimated noise=1104.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.099336 Jy ! Component: 100 - total flux cleaned = 0.12321 Jy ! Component: 150 - total flux cleaned = 0.134197 Jy ! Component: 200 - total flux cleaned = 0.137733 Jy ! Total flux subtracted in 200 components = 0.137733 Jy ! Clean residual min=-0.004083 max=0.005173 Jy/beam ! Clean residual mean=-0.000009 rms=0.001022 Jy/beam ! Combined flux in latest and established models = 0.137732 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.137732 Jy ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=7.497 mas, bpa=-1.194 degrees ! Estimated noise=864.942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (45, -85). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00197627 Jy ! Component: 100 - total flux cleaned = 0.00211203 Jy ! Component: 150 - total flux cleaned = 0.00201734 Jy ! Component: 200 - total flux cleaned = 0.00193833 Jy ! Total flux subtracted in 200 components = 0.00193833 Jy ! Clean residual min=-0.003136 max=0.003200 Jy/beam ! Clean residual mean=-0.000019 rms=0.000750 Jy/beam ! Combined flux in latest and established models = 0.139671 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 38 components and 0.139671 Jy ! Inverting map ! Added new window around map position (-15.5, -23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246439 Jy ! Component: 100 - total flux cleaned = 0.00280591 Jy ! Component: 150 - total flux cleaned = 0.00298524 Jy ! Component: 200 - total flux cleaned = 0.00315139 Jy ! Total flux subtracted in 200 components = 0.00315139 Jy ! Clean residual min=-0.003012 max=0.002689 Jy/beam ! Clean residual mean=-0.000014 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.142822 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 60 components and 0.142822 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.462 mas, bmaj=20.32 mas, bpa=-2.087 degrees ! Estimated noise=1126.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000698158 Jy ! Component: 100 - total flux cleaned = 0.000735344 Jy ! Component: 150 - total flux cleaned = 0.000669934 Jy ! Component: 200 - total flux cleaned = 0.0006709 Jy ! Total flux subtracted in 200 components = 0.0006709 Jy ! Clean residual min=-0.003345 max=0.003339 Jy/beam ! Clean residual mean=-0.000025 rms=0.000893 Jy/beam ! Combined flux in latest and established models = 0.143493 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.92135e-05 Jy ! Component: 100 - total flux cleaned = -8.43234e-05 Jy ! Component: 150 - total flux cleaned = -8.50173e-05 Jy ! Component: 200 - total flux cleaned = -0.000133045 Jy ! Total flux subtracted in 200 components = -0.000133045 Jy ! Clean residual min=-0.003273 max=0.003375 Jy/beam ! Clean residual mean=-0.000026 rms=0.000885 Jy/beam ! Combined flux in latest and established models = 0.14336 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 78 components and 0.14336 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.912 mas, bmaj=7.497 mas, bpa=-1.194 degrees ! Estimated noise=864.942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.54521e-06 Jy ! Component: 100 - total flux cleaned = -5.22248e-05 Jy ! Component: 150 - total flux cleaned = -5.28953e-05 Jy ! Component: 200 - total flux cleaned = -0.000134302 Jy ! Total flux subtracted in 200 components = -0.000134302 Jy ! Clean residual min=-0.002892 max=0.002661 Jy/beam ! Clean residual mean=-0.000013 rms=0.000646 Jy/beam ! Combined flux in latest and established models = 0.143226 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 0.143226 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.043552Jy sigma=0.000667 ! Fit after self-cal, rms=0.043451Jy sigma=0.000665 wmodel J0011-2612_S_2017_05_27_pus_map.mod ! Writing 95 model components to file: J0011-2612_S_2017_05_27_pus_map.mod wobs J0011-2612_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0011-2612_S_2017_05_27_pus_uvs.fits wwins J0011-2612_S_2017_05_27_pus_map.win ! wwins: Wrote 4 windows to J0011-2612_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000610149 Jy ! Component: 100 - total flux cleaned = -0.00109509 Jy ! Component: 150 - total flux cleaned = -0.00150945 Jy ! Component: 200 - total flux cleaned = -0.00178326 Jy ! Component: 250 - total flux cleaned = -0.00219542 Jy ! Component: 300 - total flux cleaned = -0.00252027 Jy ! Component: 350 - total flux cleaned = -0.00290273 Jy ! Component: 400 - total flux cleaned = -0.00323942 Jy ! Component: 450 - total flux cleaned = -0.0035993 Jy ! Component: 500 - total flux cleaned = -0.00391603 Jy ! Component: 550 - total flux cleaned = -0.0041926 Jy ! Component: 600 - total flux cleaned = -0.00443139 Jy ! Component: 650 - total flux cleaned = -0.00469263 Jy ! Component: 700 - total flux cleaned = -0.00486177 Jy ! Component: 750 - total flux cleaned = -0.00511013 Jy ! Component: 800 - total flux cleaned = -0.00529809 Jy ! Component: 850 - total flux cleaned = -0.0054298 Jy ! Component: 900 - total flux cleaned = -0.00555877 Jy ! Component: 950 - total flux cleaned = -0.00563472 Jy ! Component: 1000 - total flux cleaned = -0.00573417 Jy ! Component: 1050 - total flux cleaned = -0.00575859 Jy ! Component: 1100 - total flux cleaned = -0.00578256 Jy ! Component: 1150 - total flux cleaned = -0.00580621 Jy ! Component: 1200 - total flux cleaned = -0.00582955 Jy ! Component: 1250 - total flux cleaned = -0.00587483 Jy ! Component: 1300 - total flux cleaned = -0.00591901 Jy ! Component: 1350 - total flux cleaned = -0.0058968 Jy ! Component: 1400 - total flux cleaned = -0.00591834 Jy ! Component: 1450 - total flux cleaned = -0.00596073 Jy ! Component: 1500 - total flux cleaned = -0.00598149 Jy ! Component: 1550 - total flux cleaned = -0.00598178 Jy ! Component: 1600 - total flux cleaned = -0.00598257 Jy ! Component: 1650 - total flux cleaned = -0.00604293 Jy ! Component: 1700 - total flux cleaned = -0.0060628 Jy ! Component: 1750 - total flux cleaned = -0.00610126 Jy ! Component: 1800 - total flux cleaned = -0.0061013 Jy ! Component: 1850 - total flux cleaned = -0.00617692 Jy ! Component: 1900 - total flux cleaned = -0.00615801 Jy ! Component: 1950 - total flux cleaned = -0.00621372 Jy ! Component: 2000 - total flux cleaned = -0.00628646 Jy ! Component: 2050 - total flux cleaned = -0.00630471 Jy ! Component: 2100 - total flux cleaned = -0.00637589 Jy ! Component: 2150 - total flux cleaned = -0.00637587 Jy ! Component: 2200 - total flux cleaned = -0.0063934 Jy ! Component: 2250 - total flux cleaned = -0.00639366 Jy ! Component: 2300 - total flux cleaned = -0.00642782 Jy ! Component: 2350 - total flux cleaned = -0.00641129 Jy ! Component: 2400 - total flux cleaned = -0.00642797 Jy ! Component: 2450 - total flux cleaned = -0.00646059 Jy ! Component: 2500 - total flux cleaned = -0.00642774 Jy ! Component: 2550 - total flux cleaned = -0.00639545 Jy ! Component: 2600 - total flux cleaned = -0.00636379 Jy ! Component: 2650 - total flux cleaned = -0.0063638 Jy ! Component: 2700 - total flux cleaned = -0.00633257 Jy ! Component: 2750 - total flux cleaned = -0.00630175 Jy ! Component: 2800 - total flux cleaned = -0.00627115 Jy ! Component: 2850 - total flux cleaned = -0.0062107 Jy ! Component: 2900 - total flux cleaned = -0.00624073 Jy ! Component: 2950 - total flux cleaned = -0.00621096 Jy ! Component: 3000 - total flux cleaned = -0.00618146 Jy ! Component: 3050 - total flux cleaned = -0.00615215 Jy ! Component: 3100 - total flux cleaned = -0.00612328 Jy ! Component: 3150 - total flux cleaned = -0.00610901 Jy ! Component: 3200 - total flux cleaned = -0.006095 Jy ! Component: 3250 - total flux cleaned = -0.00612336 Jy ! Component: 3300 - total flux cleaned = -0.00610922 Jy ! Component: 3350 - total flux cleaned = -0.00612298 Jy ! Component: 3400 - total flux cleaned = -0.00609526 Jy ! Component: 3450 - total flux cleaned = -0.00605418 Jy ! Component: 3500 - total flux cleaned = -0.00609494 Jy ! Component: 3550 - total flux cleaned = -0.00609466 Jy ! Component: 3600 - total flux cleaned = -0.00604136 Jy ! Component: 3650 - total flux cleaned = -0.00606787 Jy ! Component: 3700 - total flux cleaned = -0.00604165 Jy ! Component: 3750 - total flux cleaned = -0.00606781 Jy ! Component: 3800 - total flux cleaned = -0.00604174 Jy ! Component: 3850 - total flux cleaned = -0.0060546 Jy ! Component: 3900 - total flux cleaned = -0.00604169 Jy ! Component: 3950 - total flux cleaned = -0.00602902 Jy ! Component: 4000 - total flux cleaned = -0.00597848 Jy ! Component: 4050 - total flux cleaned = -0.00599094 Jy ! Total flux subtracted in 4096 components = -0.00595351 Jy ! Clean residual min=-0.000748 max=0.000683 Jy/beam ! Clean residual mean=0.000003 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.137272 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 350 components and 0.137272 Jy ![Exited script file: muppet] wmap "J0011-2612_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.912 x 7.497 at -1.194 degrees (North through East) ! Clean map min=-0.0025025 max=0.12135 Jy/beam ! Writing clean map to FITS file: J0011-2612_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.121349 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00021295 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.526457 0.526457 1.05291 2.10583 4.21166 8.42332 16.8466 33.6933 67.3865 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.121 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.912 x 7.497 at -1.194 degrees (North through East) ! Clean map min=-0.0025025 max=0.12135 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0011-2612_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:52:36 2019