! Started logfile: J0011-2612_S_2017_04_28_pus_uvs.log on Thu May 2 16:12:16 2019 obs J0011-2612_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0011-2612_S_2017_04_28_pus_uva.fits ! AN table 1: 42 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.144974 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0011-2612 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 1096 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0011-2612_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 303 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 303 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 303 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 392 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.743620Jy sigma=0.044338 ! Fit after self-cal, rms=0.696496Jy sigma=0.044977 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.012 mas, bmaj=9.023 mas, bpa=-5.456 degrees ! Estimated noise=1691.72 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0869413 Jy ! Component: 100 - total flux cleaned = 0.145217 Jy ! Total flux subtracted in 100 components = 0.145217 Jy ! Clean residual min=-0.039235 max=0.050429 Jy/beam ! Clean residual mean=0.000190 rms=0.016691 Jy/beam ! Combined flux in latest and established models = 0.145217 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.145217 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.280488Jy sigma=0.002435 ! Fit after self-cal, rms=0.278860Jy sigma=0.002429 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.286 mas, bmaj=9.428 mas, bpa=-0.2333 degrees ! Estimated noise=2078.71 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.072707 Jy ! Component: 100 - total flux cleaned = 0.119198 Jy ! Component: 150 - total flux cleaned = 0.150298 Jy ! Component: 200 - total flux cleaned = 0.171478 Jy ! Total flux subtracted in 200 components = 0.171478 Jy ! Clean residual min=-0.047332 max=0.047575 Jy/beam ! Clean residual mean=0.000067 rms=0.019977 Jy/beam ! Combined flux in latest and established models = 0.316695 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 31 components and 0.316695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213312Jy sigma=0.003822 ! Fit after self-cal, rms=0.211758Jy sigma=0.003819 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.45 FD 0.90 HN 1.00* KP 0.91 ! LA 1.06 MK 0.95 NL 0.91 OV 0.90 ! PT 0.92 SC 1.00* ! ! ! Correcting IF 2. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.56 FD 0.76 HN 1.00* KP 0.82 ! LA 0.94 MK 0.96 NL 1.31 OV 0.82 ! PT 0.85 SC 1.00* ! ! ! Correcting IF 3. ! A total of 57 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.44 FD 0.81 HN 1.00* KP 0.85 ! LA 0.97 MK 0.99 NL 1.11 OV 0.80 ! PT 0.94 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 26.47 FD 0.75 HN 1.00* KP 1.00* ! LA 1.00* MK 0.94 NL 1.00* OV 1.00* ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.211758Jy sigma=0.003819 ! Fit after self-cal, rms=0.123192Jy sigma=0.000852 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.261 mas, bmaj=13.21 mas, bpa=-1.964 degrees ! Estimated noise=3513.27 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00630435 Jy ! Component: 100 - total flux cleaned = -0.0103576 Jy ! Component: 150 - total flux cleaned = -0.0141899 Jy ! Component: 200 - total flux cleaned = -0.0172205 Jy ! Total flux subtracted in 200 components = -0.0172205 Jy ! Clean residual min=-0.021624 max=0.015167 Jy/beam ! Clean residual mean=0.000132 rms=0.005270 Jy/beam ! Combined flux in latest and established models = 0.299474 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 34 components and 0.299474 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117016Jy sigma=0.000737 ! Fit after self-cal, rms=0.115349Jy sigma=0.000720 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115349Jy sigma=0.000720 ! Fit after self-cal, rms=0.113475Jy sigma=0.000711 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.213 mas, bmaj=13.53 mas, bpa=-2.226 degrees ! Estimated noise=3545.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00710967 Jy ! Component: 100 - total flux cleaned = -0.00923814 Jy ! Component: 150 - total flux cleaned = -0.0112655 Jy ! Component: 200 - total flux cleaned = -0.0128601 Jy ! Total flux subtracted in 200 components = -0.0128601 Jy ! Clean residual min=-0.015672 max=0.012411 Jy/beam ! Clean residual mean=0.000156 rms=0.004078 Jy/beam ! Combined flux in latest and established models = 0.286614 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 34 components and 0.286614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111644Jy sigma=0.000675 ! Fit after self-cal, rms=0.111691Jy sigma=0.000675 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000908305 Jy ! Component: 100 - total flux cleaned = -0.00163711 Jy ! Component: 150 - total flux cleaned = -0.00179883 Jy ! Component: 200 - total flux cleaned = -0.0016688 Jy ! Total flux subtracted in 200 components = -0.0016688 Jy ! Clean residual min=-0.012801 max=0.012245 Jy/beam ! Clean residual mean=0.000158 rms=0.003893 Jy/beam ! Combined flux in latest and established models = 0.284945 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 38 components and 0.284945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111377Jy sigma=0.000668 ! Fit after self-cal, rms=0.111397Jy sigma=0.000668 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111397Jy sigma=0.000668 ! Fit after self-cal, rms=0.109268Jy sigma=0.000660 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.191 mas, bmaj=13.94 mas, bpa=-2.424 degrees ! Estimated noise=3599.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00523893 Jy ! Component: 100 - total flux cleaned = -0.00664403 Jy ! Component: 150 - total flux cleaned = -0.00757682 Jy ! Component: 200 - total flux cleaned = -0.00817819 Jy ! Total flux subtracted in 200 components = -0.00817819 Jy ! Clean residual min=-0.011220 max=0.010058 Jy/beam ! Clean residual mean=0.000159 rms=0.003027 Jy/beam ! Combined flux in latest and established models = 0.276767 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 38 components and 0.276767 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108593Jy sigma=0.000649 ! Fit after self-cal, rms=0.108589Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000506956 Jy ! Component: 100 - total flux cleaned = -0.000816037 Jy ! Component: 150 - total flux cleaned = -0.000995379 Jy ! Component: 200 - total flux cleaned = -0.000995995 Jy ! Total flux subtracted in 200 components = -0.000995995 Jy ! Clean residual min=-0.009627 max=0.010054 Jy/beam ! Clean residual mean=0.000162 rms=0.002949 Jy/beam ! Combined flux in latest and established models = 0.275771 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 41 components and 0.275771 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108469Jy sigma=0.000646 ! Fit after self-cal, rms=0.108479Jy sigma=0.000646 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108479Jy sigma=0.000646 ! Fit after self-cal, rms=0.107173Jy sigma=0.000643 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.206 mas, bmaj=20.87 mas, bpa=19.07 degrees ! Estimated noise=4302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00478208 Jy ! Component: 100 - total flux cleaned = -0.00594116 Jy ! Component: 150 - total flux cleaned = -0.00632201 Jy ! Component: 200 - total flux cleaned = -0.00657506 Jy ! Total flux subtracted in 200 components = -0.00657506 Jy ! Clean residual min=-0.009522 max=0.009734 Jy/beam ! Clean residual mean=0.000268 rms=0.003070 Jy/beam ! Combined flux in latest and established models = 0.269196 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.269196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107179Jy sigma=0.000642 ! Fit after self-cal, rms=0.107192Jy sigma=0.000642 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000113697 Jy ! Component: 100 - total flux cleaned = -0.000331397 Jy ! Component: 150 - total flux cleaned = -0.000479241 Jy ! Component: 200 - total flux cleaned = -0.000571135 Jy ! Total flux subtracted in 200 components = -0.000571135 Jy ! Clean residual min=-0.009308 max=0.009773 Jy/beam ! Clean residual mean=0.000270 rms=0.003050 Jy/beam ! Combined flux in latest and established models = 0.268625 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.268625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107193Jy sigma=0.000642 ! Fit after self-cal, rms=0.107199Jy sigma=0.000642 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.175 mas, bmaj=14.21 mas, bpa=-2.572 degrees ! Estimated noise=3623.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.175 x 14.21 at -2.572 degrees (North through East) ! Clean map min=-0.0098577 max=0.23345 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.457 mas, bmaj=13.57 mas, bpa=-3.974 degrees ! Estimated noise=4245.39 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189967 Jy ! Component: 100 - total flux cleaned = 0.236821 Jy ! Component: 150 - total flux cleaned = 0.256788 Jy ! Component: 200 - total flux cleaned = 0.266013 Jy ! Total flux subtracted in 200 components = 0.266013 Jy ! Clean residual min=-0.009078 max=0.009187 Jy/beam ! Clean residual mean=0.000112 rms=0.002485 Jy/beam ! Combined flux in latest and established models = 0.266013 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.266013 Jy ! Inverting map and beam ! Estimated beam: bmin=4.175 mas, bmaj=14.21 mas, bpa=-2.572 degrees ! Estimated noise=3623.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342913 Jy ! Component: 100 - total flux cleaned = 0.00479896 Jy ! Component: 150 - total flux cleaned = 0.00484961 Jy ! Component: 200 - total flux cleaned = 0.00494348 Jy ! Total flux subtracted in 200 components = 0.00494348 Jy ! Clean residual min=-0.007355 max=0.009049 Jy/beam ! Clean residual mean=0.000156 rms=0.002367 Jy/beam ! Combined flux in latest and established models = 0.270957 Jy ! Adding 11 model components to the UV plane model. ! The established model now contains 31 components and 0.270957 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.206 mas, bmaj=20.87 mas, bpa=19.07 degrees ! Estimated noise=4302 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000262197 Jy ! Component: 100 - total flux cleaned = -0.000317296 Jy ! Component: 150 - total flux cleaned = -0.000426505 Jy ! Component: 200 - total flux cleaned = -0.000476533 Jy ! Total flux subtracted in 200 components = -0.000476533 Jy ! Clean residual min=-0.009028 max=0.010170 Jy/beam ! Clean residual mean=0.000260 rms=0.003050 Jy/beam ! Combined flux in latest and established models = 0.27048 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.0026e-05 Jy ! Component: 100 - total flux cleaned = -9.58964e-05 Jy ! Component: 150 - total flux cleaned = -9.34871e-05 Jy ! Component: 200 - total flux cleaned = -0.000135361 Jy ! Total flux subtracted in 200 components = -0.000135361 Jy ! Clean residual min=-0.009057 max=0.009982 Jy/beam ! Clean residual mean=0.000261 rms=0.003023 Jy/beam ! Combined flux in latest and established models = 0.270345 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.270345 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.175 mas, bmaj=14.21 mas, bpa=-2.572 degrees ! Estimated noise=3623.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000742685 Jy ! Component: 100 - total flux cleaned = 0.000911539 Jy ! Component: 150 - total flux cleaned = 0.000972474 Jy ! Component: 200 - total flux cleaned = 0.0010013 Jy ! Total flux subtracted in 200 components = 0.0010013 Jy ! Clean residual min=-0.007237 max=0.008759 Jy/beam ! Clean residual mean=0.000155 rms=0.002317 Jy/beam ! Combined flux in latest and established models = 0.271346 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 49 components and 0.271346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106780Jy sigma=0.000636 ! Fit after self-cal, rms=0.106714Jy sigma=0.000636 wmodel J0011-2612_S_2017_04_28_pus_map.mod ! Writing 49 model components to file: J0011-2612_S_2017_04_28_pus_map.mod wobs J0011-2612_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0011-2612_S_2017_04_28_pus_uvs.fits wwins J0011-2612_S_2017_04_28_pus_map.win ! wwins: Wrote 1 windows to J0011-2612_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00284569 Jy ! Component: 100 - total flux cleaned = 0.00465681 Jy ! Component: 150 - total flux cleaned = 0.00642133 Jy ! Component: 200 - total flux cleaned = 0.00771709 Jy ! Component: 250 - total flux cleaned = 0.00900183 Jy ! Component: 300 - total flux cleaned = 0.0100133 Jy ! Component: 350 - total flux cleaned = 0.0111482 Jy ! Component: 400 - total flux cleaned = 0.0118934 Jy ! Component: 450 - total flux cleaned = 0.0126039 Jy ! Component: 500 - total flux cleaned = 0.0135864 Jy ! Component: 550 - total flux cleaned = 0.0144502 Jy ! Component: 600 - total flux cleaned = 0.0152781 Jy ! Component: 650 - total flux cleaned = 0.0158098 Jy ! Component: 700 - total flux cleaned = 0.016514 Jy ! Component: 750 - total flux cleaned = 0.0169475 Jy ! Component: 800 - total flux cleaned = 0.0175452 Jy ! Component: 850 - total flux cleaned = 0.0181814 Jy ! Component: 900 - total flux cleaned = 0.0187411 Jy ! Component: 950 - total flux cleaned = 0.019232 Jy ! Component: 1000 - total flux cleaned = 0.019868 Jy ! Component: 1050 - total flux cleaned = 0.0204339 Jy ! Component: 1100 - total flux cleaned = 0.0209858 Jy ! Component: 1150 - total flux cleaned = 0.0215243 Jy ! Component: 1200 - total flux cleaned = 0.0219549 Jy ! Component: 1250 - total flux cleaned = 0.0225147 Jy ! Component: 1300 - total flux cleaned = 0.0228782 Jy ! Component: 1350 - total flux cleaned = 0.0232786 Jy ! Component: 1400 - total flux cleaned = 0.0236699 Jy ! Component: 1450 - total flux cleaned = 0.0240111 Jy ! Component: 1500 - total flux cleaned = 0.0244285 Jy ! Component: 1550 - total flux cleaned = 0.0247146 Jy ! Component: 1600 - total flux cleaned = 0.0249163 Jy ! Component: 1650 - total flux cleaned = 0.025194 Jy ! Component: 1700 - total flux cleaned = 0.02539 Jy ! Component: 1750 - total flux cleaned = 0.0256222 Jy ! Component: 1800 - total flux cleaned = 0.0256605 Jy ! Component: 1850 - total flux cleaned = 0.0258125 Jy ! Component: 1900 - total flux cleaned = 0.0260008 Jy ! Component: 1950 - total flux cleaned = 0.0260384 Jy ! Component: 2000 - total flux cleaned = 0.0261864 Jy ! Component: 2050 - total flux cleaned = 0.0263335 Jy ! Component: 2100 - total flux cleaned = 0.0262601 Jy ! Component: 2150 - total flux cleaned = 0.0263692 Jy ! Component: 2200 - total flux cleaned = 0.0264414 Jy ! Component: 2250 - total flux cleaned = 0.0263694 Jy ! Component: 2300 - total flux cleaned = 0.026441 Jy ! Component: 2350 - total flux cleaned = 0.0264413 Jy ! Component: 2400 - total flux cleaned = 0.0265838 Jy ! Component: 2450 - total flux cleaned = 0.0265839 Jy ! Component: 2500 - total flux cleaned = 0.0266546 Jy ! Component: 2550 - total flux cleaned = 0.0266545 Jy ! Component: 2600 - total flux cleaned = 0.0266901 Jy ! Component: 2650 - total flux cleaned = 0.0267254 Jy ! Component: 2700 - total flux cleaned = 0.0266903 Jy ! Component: 2750 - total flux cleaned = 0.0266904 Jy ! Component: 2800 - total flux cleaned = 0.0268318 Jy ! Component: 2850 - total flux cleaned = 0.026867 Jy ! Component: 2900 - total flux cleaned = 0.0269737 Jy ! Component: 2950 - total flux cleaned = 0.0269737 Jy ! Component: 3000 - total flux cleaned = 0.0270449 Jy ! Component: 3050 - total flux cleaned = 0.027117 Jy ! Component: 3100 - total flux cleaned = 0.0272972 Jy ! Component: 3150 - total flux cleaned = 0.0273699 Jy ! Component: 3200 - total flux cleaned = 0.0274064 Jy ! Component: 3250 - total flux cleaned = 0.0274797 Jy ! Component: 3300 - total flux cleaned = 0.0275162 Jy ! Component: 3350 - total flux cleaned = 0.0276263 Jy ! Component: 3400 - total flux cleaned = 0.0277371 Jy ! Component: 3450 - total flux cleaned = 0.0277372 Jy ! Component: 3500 - total flux cleaned = 0.0277368 Jy ! Component: 3550 - total flux cleaned = 0.0278489 Jy ! Component: 3600 - total flux cleaned = 0.0278862 Jy ! Component: 3650 - total flux cleaned = 0.0280374 Jy ! Component: 3700 - total flux cleaned = 0.0280377 Jy ! Component: 3750 - total flux cleaned = 0.0281522 Jy ! Component: 3800 - total flux cleaned = 0.0281903 Jy ! Component: 3850 - total flux cleaned = 0.0282286 Jy ! Component: 3900 - total flux cleaned = 0.0283838 Jy ! Component: 3950 - total flux cleaned = 0.0284227 Jy ! Component: 4000 - total flux cleaned = 0.0284621 Jy ! Component: 4050 - total flux cleaned = 0.0285805 Jy ! Total flux subtracted in 4096 components = 0.0287393 Jy ! Clean residual min=-0.002287 max=0.002211 Jy/beam ! Clean residual mean=0.000081 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.300086 Jy keep ! Adding 238 model components to the UV plane model. ! The established model now contains 287 components and 0.300086 Jy ![Exited script file: muppet] wmap "J0011-2612_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.175 x 14.21 at -2.572 degrees (North through East) ! Clean map min=-0.004515 max=0.24266 Jy/beam ! Writing clean map to FITS file: J0011-2612_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.242659 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000660713 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.816841 0.816841 1.63368 3.26737 6.53473 13.0695 26.1389 52.2778 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.242 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.175 x 14.21 at -2.572 degrees (North through East) ! Clean map min=-0.004515 max=0.24266 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0011-2612_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:12:21 2019