! Started logfile: J0011-2612_S_2017_02_19_pus_uvs.log on Sat May 4 18:38:44 2019 obs J0011-2612_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0011-2612_S_2017_02_19_pus_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.566667 visibilities/baseline/integration-bin. ! Found source: J0011-2612 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 3672 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0011-2612_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 106 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 208 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.686226Jy sigma=0.004202 ! Fit after self-cal, rms=0.671121Jy sigma=0.004131 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.439 mas, bmaj=6.701 mas, bpa=-5.106 degrees ! Estimated noise=2619.54 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.253866 Jy ! Component: 100 - total flux cleaned = 0.310068 Jy ! Total flux subtracted in 100 components = 0.310068 Jy ! Clean residual min=-0.014972 max=0.021279 Jy/beam ! Clean residual mean=0.000124 rms=0.003863 Jy/beam ! Combined flux in latest and established models = 0.310068 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.310068 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.140904Jy sigma=0.000784 ! Fit after self-cal, rms=0.140897Jy sigma=0.000784 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=7.787 mas, bpa=-2.999 degrees ! Estimated noise=2110.31 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0298224 Jy ! Component: 100 - total flux cleaned = 0.0427918 Jy ! Component: 150 - total flux cleaned = 0.0500402 Jy ! Component: 200 - total flux cleaned = 0.0539384 Jy ! Total flux subtracted in 200 components = 0.0539384 Jy ! Clean residual min=-0.010721 max=0.013421 Jy/beam ! Clean residual mean=0.000070 rms=0.002722 Jy/beam ! Combined flux in latest and established models = 0.364006 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 26 components and 0.364006 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134503Jy sigma=0.000747 ! Fit after self-cal, rms=0.134477Jy sigma=0.000747 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.22 KP 1.00 ! LA 1.01 MK 0.97 NL 0.93 OV 1.04 ! PT 1.00* SC 0.91 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.00 HN 1.26 KP 0.97 ! LA 1.01 MK 1.00 NL 1.05 OV 1.04 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.01 HN 1.20 KP 0.86 ! LA 0.76 MK 1.00 NL 1.21 OV 0.95 ! PT 1.00* SC 0.99 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.02 HN 1.18 KP 1.00* ! LA 0.73 MK 1.12 NL 1.00* OV 0.98 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.134477Jy sigma=0.000747 ! Fit after self-cal, rms=0.126837Jy sigma=0.000689 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.966 mas, bmaj=7.768 mas, bpa=-2.211 degrees ! Estimated noise=2108.48 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00339884 Jy ! Component: 100 - total flux cleaned = -0.00370294 Jy ! Component: 150 - total flux cleaned = -0.00393349 Jy ! Component: 200 - total flux cleaned = -0.00402567 Jy ! Total flux subtracted in 200 components = -0.00402567 Jy ! Clean residual min=-0.008666 max=0.007962 Jy/beam ! Clean residual mean=0.000020 rms=0.001938 Jy/beam ! Combined flux in latest and established models = 0.35998 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.35998 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126410Jy sigma=0.000688 ! Fit after self-cal, rms=0.126616Jy sigma=0.000688 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126616Jy sigma=0.000688 ! Fit after self-cal, rms=0.130553Jy sigma=0.000661 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=7.779 mas, bpa=-2.167 degrees ! Estimated noise=2102.74 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116856 Jy ! Component: 100 - total flux cleaned = -0.00116865 Jy ! Component: 150 - total flux cleaned = -0.00127961 Jy ! Component: 200 - total flux cleaned = -0.00133198 Jy ! Total flux subtracted in 200 components = -0.00133198 Jy ! Clean residual min=-0.005841 max=0.005513 Jy/beam ! Clean residual mean=0.000010 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.358649 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.358649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130505Jy sigma=0.000661 ! Fit after self-cal, rms=0.130698Jy sigma=0.000661 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000209307 Jy ! Component: 100 - total flux cleaned = -0.000163879 Jy ! Component: 150 - total flux cleaned = -0.000164313 Jy ! Component: 200 - total flux cleaned = -0.0001637 Jy ! Total flux subtracted in 200 components = -0.0001637 Jy ! Clean residual min=-0.005781 max=0.005538 Jy/beam ! Clean residual mean=0.000011 rms=0.001403 Jy/beam ! Combined flux in latest and established models = 0.358485 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 49 components and 0.358485 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130675Jy sigma=0.000660 ! Fit after self-cal, rms=0.130678Jy sigma=0.000660 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130678Jy sigma=0.000660 ! Fit after self-cal, rms=0.130816Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.778 mas, bpa=-2.097 degrees ! Estimated noise=2101.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00054715 Jy ! Component: 100 - total flux cleaned = -0.000587711 Jy ! Component: 150 - total flux cleaned = -0.000623923 Jy ! Component: 200 - total flux cleaned = -0.000623601 Jy ! Total flux subtracted in 200 components = -0.000623601 Jy ! Clean residual min=-0.005196 max=0.005272 Jy/beam ! Clean residual mean=0.000005 rms=0.001323 Jy/beam ! Combined flux in latest and established models = 0.357861 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.357861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130795Jy sigma=0.000656 ! Fit after self-cal, rms=0.130819Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.5331e-05 Jy ! Component: 100 - total flux cleaned = -5.3714e-05 Jy ! Component: 150 - total flux cleaned = -5.50368e-05 Jy ! Component: 200 - total flux cleaned = -8.18429e-05 Jy ! Total flux subtracted in 200 components = -8.18429e-05 Jy ! Clean residual min=-0.005168 max=0.005281 Jy/beam ! Clean residual mean=0.000005 rms=0.001321 Jy/beam ! Combined flux in latest and established models = 0.357779 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 52 components and 0.357779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130809Jy sigma=0.000656 ! Fit after self-cal, rms=0.130811Jy sigma=0.000656 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130811Jy sigma=0.000656 ! Fit after self-cal, rms=0.130825Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.436 mas, bmaj=16.77 mas, bpa=2.145 degrees ! Estimated noise=2789.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000986042 Jy ! Component: 100 - total flux cleaned = 0.00093416 Jy ! Component: 150 - total flux cleaned = 0.000890877 Jy ! Component: 200 - total flux cleaned = 0.000871522 Jy ! Total flux subtracted in 200 components = 0.000871522 Jy ! Clean residual min=-0.005459 max=0.005318 Jy/beam ! Clean residual mean=0.000011 rms=0.001699 Jy/beam ! Combined flux in latest and established models = 0.358651 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 60 components and 0.358651 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130830Jy sigma=0.000656 ! Fit after self-cal, rms=0.130834Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125982 Jy ! Component: 100 - total flux cleaned = 0.00010503 Jy ! Component: 150 - total flux cleaned = 8.5908e-05 Jy ! Component: 200 - total flux cleaned = 6.91658e-05 Jy ! Total flux subtracted in 200 components = 6.91658e-05 Jy ! Clean residual min=-0.005444 max=0.005330 Jy/beam ! Clean residual mean=0.000011 rms=0.001697 Jy/beam ! Combined flux in latest and established models = 0.35872 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 62 components and 0.35872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130839Jy sigma=0.000656 ! Fit after self-cal, rms=0.130841Jy sigma=0.000656 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.783 mas, bpa=-2.029 degrees ! Estimated noise=2100.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.972 x 7.783 at -2.029 degrees (North through East) ! Clean map min=-0.0049517 max=0.33636 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.45 mas, bmaj=6.638 mas, bpa=-4.196 degrees ! Estimated noise=2674.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.25888 Jy ! Component: 100 - total flux cleaned = 0.315472 Jy ! Component: 150 - total flux cleaned = 0.33394 Jy ! Component: 200 - total flux cleaned = 0.344639 Jy ! Total flux subtracted in 200 components = 0.344639 Jy ! Clean residual min=-0.008093 max=0.008108 Jy/beam ! Clean residual mean=0.000018 rms=0.001906 Jy/beam ! Combined flux in latest and established models = 0.344639 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.344639 Jy ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.783 mas, bpa=-2.029 degrees ! Estimated noise=2100.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00815973 Jy ! Component: 100 - total flux cleaned = 0.0117652 Jy ! Component: 150 - total flux cleaned = 0.0122585 Jy ! Component: 200 - total flux cleaned = 0.0127151 Jy ! Total flux subtracted in 200 components = 0.0127151 Jy ! Clean residual min=-0.005084 max=0.005357 Jy/beam ! Clean residual mean=0.000005 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.357354 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 29 components and 0.357354 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.436 mas, bmaj=16.77 mas, bpa=2.145 degrees ! Estimated noise=2789.81 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0015577 Jy ! Component: 100 - total flux cleaned = 0.00155142 Jy ! Component: 150 - total flux cleaned = 0.00157517 Jy ! Component: 200 - total flux cleaned = 0.00157577 Jy ! Total flux subtracted in 200 components = 0.00157577 Jy ! Clean residual min=-0.005524 max=0.005309 Jy/beam ! Clean residual mean=0.000011 rms=0.001693 Jy/beam ! Combined flux in latest and established models = 0.35893 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.16724e-05 Jy ! Component: 100 - total flux cleaned = -4.18376e-05 Jy ! Component: 150 - total flux cleaned = -4.14075e-05 Jy ! Component: 200 - total flux cleaned = -6.04941e-05 Jy ! Total flux subtracted in 200 components = -6.04941e-05 Jy ! Clean residual min=-0.005494 max=0.005311 Jy/beam ! Clean residual mean=0.000011 rms=0.001692 Jy/beam ! Combined flux in latest and established models = 0.358869 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.358869 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.972 mas, bmaj=7.783 mas, bpa=-2.029 degrees ! Estimated noise=2100.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000818904 Jy ! Component: 100 - total flux cleaned = -0.000772274 Jy ! Component: 150 - total flux cleaned = -0.000696189 Jy ! Component: 200 - total flux cleaned = -0.000664784 Jy ! Total flux subtracted in 200 components = -0.000664784 Jy ! Clean residual min=-0.005022 max=0.005349 Jy/beam ! Clean residual mean=0.000004 rms=0.001317 Jy/beam ! Combined flux in latest and established models = 0.358205 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 48 components and 0.358205 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130809Jy sigma=0.000656 ! Fit after self-cal, rms=0.130803Jy sigma=0.000656 wmodel J0011-2612_S_2017_02_19_pus_map.mod ! Writing 48 model components to file: J0011-2612_S_2017_02_19_pus_map.mod wobs J0011-2612_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0011-2612_S_2017_02_19_pus_uvs.fits wwins J0011-2612_S_2017_02_19_pus_map.win ! wwins: Wrote 1 windows to J0011-2612_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000216547 Jy ! Component: 100 - total flux cleaned = 0.000303526 Jy ! Component: 150 - total flux cleaned = 0.000388764 Jy ! Component: 200 - total flux cleaned = 0.000633427 Jy ! Component: 250 - total flux cleaned = 0.000633352 Jy ! Component: 300 - total flux cleaned = 0.000868284 Jy ! Component: 350 - total flux cleaned = 0.000945293 Jy ! Component: 400 - total flux cleaned = 0.00109571 Jy ! Component: 450 - total flux cleaned = 0.00146324 Jy ! Component: 500 - total flux cleaned = 0.00160701 Jy ! Component: 550 - total flux cleaned = 0.00182002 Jy ! Component: 600 - total flux cleaned = 0.00216948 Jy ! Component: 650 - total flux cleaned = 0.00230727 Jy ! Component: 700 - total flux cleaned = 0.00251145 Jy ! Component: 750 - total flux cleaned = 0.00278058 Jy ! Component: 800 - total flux cleaned = 0.00304451 Jy ! Component: 850 - total flux cleaned = 0.00337076 Jy ! Component: 900 - total flux cleaned = 0.00337107 Jy ! Component: 950 - total flux cleaned = 0.00356363 Jy ! Component: 1000 - total flux cleaned = 0.00394173 Jy ! Component: 1050 - total flux cleaned = 0.00387874 Jy ! Component: 1100 - total flux cleaned = 0.00406406 Jy ! Component: 1150 - total flux cleaned = 0.00400334 Jy ! Component: 1200 - total flux cleaned = 0.0041845 Jy ! Component: 1250 - total flux cleaned = 0.0042441 Jy ! Component: 1300 - total flux cleaned = 0.00430309 Jy ! Component: 1350 - total flux cleaned = 0.00412786 Jy ! Component: 1400 - total flux cleaned = 0.00441769 Jy ! Component: 1450 - total flux cleaned = 0.00441768 Jy ! Component: 1500 - total flux cleaned = 0.00441705 Jy ! Component: 1550 - total flux cleaned = 0.00441718 Jy ! Component: 1600 - total flux cleaned = 0.00441784 Jy ! Component: 1650 - total flux cleaned = 0.00458413 Jy ! Component: 1700 - total flux cleaned = 0.00474816 Jy ! Component: 1750 - total flux cleaned = 0.00480246 Jy ! Component: 1800 - total flux cleaned = 0.0049097 Jy ! Component: 1850 - total flux cleaned = 0.00506949 Jy ! Component: 1900 - total flux cleaned = 0.00512231 Jy ! Component: 1950 - total flux cleaned = 0.00507013 Jy ! Component: 2000 - total flux cleaned = 0.00543457 Jy ! Component: 2050 - total flux cleaned = 0.00548603 Jy ! Component: 2100 - total flux cleaned = 0.00543454 Jy ! Component: 2150 - total flux cleaned = 0.00558754 Jy ! Component: 2200 - total flux cleaned = 0.00558708 Jy ! Component: 2250 - total flux cleaned = 0.0056371 Jy ! Component: 2300 - total flux cleaned = 0.00588597 Jy ! Component: 2350 - total flux cleaned = 0.00598497 Jy ! Component: 2400 - total flux cleaned = 0.00598536 Jy ! Component: 2450 - total flux cleaned = 0.00618031 Jy ! Component: 2500 - total flux cleaned = 0.00622912 Jy ! Component: 2550 - total flux cleaned = 0.00651715 Jy ! Component: 2600 - total flux cleaned = 0.00670736 Jy ! Component: 2650 - total flux cleaned = 0.00684991 Jy ! Component: 2700 - total flux cleaned = 0.00675558 Jy ! Component: 2750 - total flux cleaned = 0.00694293 Jy ! Component: 2800 - total flux cleaned = 0.00694188 Jy ! Component: 2850 - total flux cleaned = 0.00703424 Jy ! Component: 2900 - total flux cleaned = 0.00685097 Jy ! Component: 2950 - total flux cleaned = 0.00716993 Jy ! Component: 3000 - total flux cleaned = 0.00707886 Jy ! Component: 3050 - total flux cleaned = 0.00707854 Jy ! Component: 3100 - total flux cleaned = 0.00703443 Jy ! Component: 3150 - total flux cleaned = 0.00725591 Jy ! Component: 3200 - total flux cleaned = 0.0073439 Jy ! Component: 3250 - total flux cleaned = 0.00703694 Jy ! Component: 3300 - total flux cleaned = 0.00729841 Jy ! Component: 3350 - total flux cleaned = 0.00729809 Jy ! Component: 3400 - total flux cleaned = 0.00738441 Jy ! Component: 3450 - total flux cleaned = 0.00729866 Jy ! Component: 3500 - total flux cleaned = 0.00742636 Jy ! Component: 3550 - total flux cleaned = 0.00751059 Jy ! Component: 3600 - total flux cleaned = 0.00742662 Jy ! Component: 3650 - total flux cleaned = 0.00738477 Jy ! Component: 3700 - total flux cleaned = 0.00750911 Jy ! Component: 3750 - total flux cleaned = 0.00771627 Jy ! Component: 3800 - total flux cleaned = 0.00767484 Jy ! Component: 3850 - total flux cleaned = 0.00763407 Jy ! Component: 3900 - total flux cleaned = 0.0077964 Jy ! Component: 3950 - total flux cleaned = 0.00775612 Jy ! Component: 4000 - total flux cleaned = 0.0075553 Jy ! Component: 4050 - total flux cleaned = 0.00779512 Jy ! Total flux subtracted in 4096 components = 0.00771582 Jy ! Clean residual min=-0.002499 max=0.002823 Jy/beam ! Clean residual mean=-0.000005 rms=0.000751 Jy/beam ! Combined flux in latest and established models = 0.36592 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 354 components and 0.365921 Jy ![Exited script file: muppet] wmap "J0011-2612_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.972 x 7.783 at -2.029 degrees (North through East) ! Clean map min=-0.0042866 max=0.33713 Jy/beam ! Writing clean map to FITS file: J0011-2612_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.337134 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000749367 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.666828 0.666828 1.33366 2.66731 5.33462 10.6692 21.3385 42.677 85.354 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.337 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.972 x 7.783 at -2.029 degrees (North through East) ! Clean map min=-0.0042866 max=0.33713 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0011-2612_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:38:49 2019