! Started logfile: J0010-4153_S_2017_09_26_pus_uvs.log on Sat May 11 12:52:47 2019 obs J0010-4153_S_2017_09_26_pus_uva.fits ! Reading UV FITS file: J0010-4153_S_2017_09_26_pus_uva.fits ! AN table 1: 266 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.350982 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0010-4153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 674 lines of history. ! ! Reading 13444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010-4153_S_2017_09_26_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 925 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 925 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 925 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 1617 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.894981Jy sigma=0.005262 ! Fit after self-cal, rms=0.677777Jy sigma=0.003995 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.561 mas, bmaj=15.06 mas, bpa=-25.2 degrees ! Estimated noise=2777.24 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.497209 Jy ! Component: 100 - total flux cleaned = 0.756837 Jy ! Total flux subtracted in 100 components = 0.756837 Jy ! Clean residual min=-0.108319 max=0.138086 Jy/beam ! Clean residual mean=-0.002335 rms=0.040759 Jy/beam ! Combined flux in latest and established models = 0.756837 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 31 components and 0.756837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.636098Jy sigma=0.003793 ! Fit after self-cal, rms=0.635646Jy sigma=0.003790 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=19.05 mas, bpa=-25.03 degrees ! Estimated noise=1138.44 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.333044 Jy ! Component: 100 - total flux cleaned = 0.488872 Jy ! Component: 150 - total flux cleaned = 0.57976 Jy ! Component: 200 - total flux cleaned = 0.635827 Jy ! Total flux subtracted in 200 components = 0.635827 Jy ! Clean residual min=-0.159751 max=0.212741 Jy/beam ! Clean residual mean=-0.001603 rms=0.059102 Jy/beam ! Combined flux in latest and established models = 1.39266 Jy ! Performing phase self-cal ! Adding 90 model components to the UV plane model. ! The established model now contains 110 components and 1.39266 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.452848Jy sigma=0.002674 ! Fit after self-cal, rms=0.452120Jy sigma=0.002667 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.28 HN 1.00* KP 1.01 ! LA 0.86 MK 1.00 NL 1.00* OV 0.99 ! PT 1.02 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.33 HN 1.00* KP 1.01 ! LA 0.82 MK 1.01 NL 1.00* OV 1.04 ! PT 0.96 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.31 HN 1.00* KP 1.03 ! LA 0.81 MK 0.98 NL 1.00* OV 0.97 ! PT 0.92 ! ! ! Correcting IF 4. ! A total of 222 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.29 HN 1.00* KP 1.00* ! LA 1.38 MK 0.99 NL 1.00* OV 1.34 ! PT 0.95 ! ! ! Fit before self-cal, rms=0.452120Jy sigma=0.002667 ! Fit after self-cal, rms=0.420675Jy sigma=0.002468 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.456 mas, bmaj=19.2 mas, bpa=-25.15 degrees ! Estimated noise=1136.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196393 Jy ! Component: 100 - total flux cleaned = 0.0217474 Jy ! Component: 150 - total flux cleaned = 0.0243462 Jy ! Component: 200 - total flux cleaned = 0.0267859 Jy ! Total flux subtracted in 200 components = 0.0267859 Jy ! Clean residual min=-0.161932 max=0.198220 Jy/beam ! Clean residual mean=0.000932 rms=0.052148 Jy/beam ! Combined flux in latest and established models = 1.41945 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 122 components and 1.41945 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.417401Jy sigma=0.002457 ! Fit after self-cal, rms=0.422336Jy sigma=0.002449 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.422336Jy sigma=0.002449 ! Fit after self-cal, rms=0.453979Jy sigma=0.002075 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.47 mas, bmaj=19.35 mas, bpa=-25.13 degrees ! Estimated noise=1155.15 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0200802 Jy ! Component: 100 - total flux cleaned = 0.0219616 Jy ! Component: 150 - total flux cleaned = 0.0253228 Jy ! Component: 200 - total flux cleaned = 0.0283916 Jy ! Total flux subtracted in 200 components = 0.0283916 Jy ! Clean residual min=-0.144277 max=0.157577 Jy/beam ! Clean residual mean=-0.000723 rms=0.043312 Jy/beam ! Combined flux in latest and established models = 1.44784 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 128 components and 1.44784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.447895Jy sigma=0.002053 ! Fit after self-cal, rms=0.452700Jy sigma=0.002047 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606115 Jy ! Component: 100 - total flux cleaned = 0.00772935 Jy ! Component: 150 - total flux cleaned = 0.00768185 Jy ! Component: 200 - total flux cleaned = 0.00829445 Jy ! Total flux subtracted in 200 components = 0.00829445 Jy ! Clean residual min=-0.143926 max=0.153631 Jy/beam ! Clean residual mean=-0.000692 rms=0.042933 Jy/beam ! Combined flux in latest and established models = 1.45614 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 151 components and 1.45614 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.448043Jy sigma=0.002039 ! Fit after self-cal, rms=0.452043Jy sigma=0.002035 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.452043Jy sigma=0.002035 ! Fit after self-cal, rms=0.451656Jy sigma=0.002028 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.475 mas, bmaj=19.33 mas, bpa=-25.06 degrees ! Estimated noise=1155.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0108053 Jy ! Component: 100 - total flux cleaned = 0.0124924 Jy ! Component: 150 - total flux cleaned = 0.0140113 Jy ! Component: 200 - total flux cleaned = 0.0168045 Jy ! Total flux subtracted in 200 components = 0.0168045 Jy ! Clean residual min=-0.144591 max=0.150420 Jy/beam ! Clean residual mean=-0.000963 rms=0.042314 Jy/beam ! Combined flux in latest and established models = 1.47294 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 158 components and 1.47294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.447185Jy sigma=0.002013 ! Fit after self-cal, rms=0.450885Jy sigma=0.002010 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0031791 Jy ! Component: 100 - total flux cleaned = 0.00397273 Jy ! Component: 150 - total flux cleaned = 0.00400604 Jy ! Component: 200 - total flux cleaned = 0.00525598 Jy ! Total flux subtracted in 200 components = 0.00525598 Jy ! Clean residual min=-0.144748 max=0.147026 Jy/beam ! Clean residual mean=-0.000944 rms=0.042048 Jy/beam ! Combined flux in latest and established models = 1.4782 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 165 components and 1.4782 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.446854Jy sigma=0.002004 ! Fit after self-cal, rms=0.450440Jy sigma=0.002001 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.450440Jy sigma=0.002001 ! Fit after self-cal, rms=0.451111Jy sigma=0.001997 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.32 mas, bmaj=42.19 mas, bpa=-13.93 degrees ! Estimated noise=1399.45 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174834 Jy ! Component: 100 - total flux cleaned = 0.0173552 Jy ! Component: 150 - total flux cleaned = 0.0214968 Jy ! Component: 200 - total flux cleaned = 0.0252221 Jy ! Total flux subtracted in 200 components = 0.0252221 Jy ! Clean residual min=-0.192830 max=0.206895 Jy/beam ! Clean residual mean=-0.001648 rms=0.062294 Jy/beam ! Combined flux in latest and established models = 1.50342 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 174 components and 1.50342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.447645Jy sigma=0.001998 ! Fit after self-cal, rms=0.453787Jy sigma=0.001990 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00503985 Jy ! Component: 100 - total flux cleaned = 0.00497592 Jy ! Component: 150 - total flux cleaned = 0.00494377 Jy ! Component: 200 - total flux cleaned = 0.00695903 Jy ! Total flux subtracted in 200 components = 0.00695903 Jy ! Clean residual min=-0.193618 max=0.198039 Jy/beam ! Clean residual mean=-0.001602 rms=0.061767 Jy/beam ! Combined flux in latest and established models = 1.51038 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 176 components and 1.51038 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.451021Jy sigma=0.002001 ! Fit after self-cal, rms=0.456207Jy sigma=0.001994 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=19.38 mas, bpa=-25.1 degrees ! Estimated noise=1158.59 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.491 x 19.38 at -25.1 degrees (North through East) ! Clean map min=-0.14954 max=0.64655 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.456207Jy sigma=0.001994 ! Fit after self-cal, rms=0.458798Jy sigma=0.001941 ! Inverting map and beam ! Estimated beam: bmin=3.556 mas, bmaj=19.54 mas, bpa=-23.86 degrees ! Estimated noise=1167.24 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00516206 Jy ! Component: 100 - total flux cleaned = -0.00508806 Jy ! Component: 150 - total flux cleaned = -0.00509512 Jy ! Component: 200 - total flux cleaned = -0.00312727 Jy ! Total flux subtracted in 200 components = -0.00312727 Jy ! Clean residual min=-0.149817 max=0.133650 Jy/beam ! Clean residual mean=-0.001393 rms=0.040983 Jy/beam ! Combined flux in latest and established models = 1.50725 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 190 components and 1.50725 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.453523Jy sigma=0.001917 ! Fit after self-cal, rms=0.455028Jy sigma=0.001915 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149417 Jy ! Component: 100 - total flux cleaned = 0.000538304 Jy ! Component: 150 - total flux cleaned = 0.00115066 Jy ! Component: 200 - total flux cleaned = 0.00226045 Jy ! Total flux subtracted in 200 components = 0.00226045 Jy ! Clean residual min=-0.149428 max=0.131881 Jy/beam ! Clean residual mean=-0.001384 rms=0.040918 Jy/beam ! Combined flux in latest and established models = 1.50951 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 198 components and 1.50951 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.451826Jy sigma=0.001913 ! Fit after self-cal, rms=0.454615Jy sigma=0.001911 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.454615Jy sigma=0.001911 ! Fit after self-cal, rms=0.452998Jy sigma=0.001907 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.629 mas, bmaj=15.09 mas, bpa=-24.34 degrees ! Estimated noise=3265.18 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.548271 Jy ! Component: 100 - total flux cleaned = 0.828479 Jy ! Component: 150 - total flux cleaned = 1.0054 Jy ! Component: 200 - total flux cleaned = 1.12578 Jy ! Total flux subtracted in 200 components = 1.12578 Jy ! Clean residual min=-0.110073 max=0.111955 Jy/beam ! Clean residual mean=-0.001991 rms=0.034113 Jy/beam ! Combined flux in latest and established models = 1.12578 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 1.12578 Jy ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=19.76 mas, bpa=-24.33 degrees ! Estimated noise=1179.42 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.158059 Jy ! Component: 100 - total flux cleaned = 0.248623 Jy ! Component: 150 - total flux cleaned = 0.303269 Jy ! Component: 200 - total flux cleaned = 0.336339 Jy ! Total flux subtracted in 200 components = 0.336339 Jy ! Clean residual min=-0.150311 max=0.135663 Jy/beam ! Clean residual mean=-0.001644 rms=0.042737 Jy/beam ! Combined flux in latest and established models = 1.46212 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 81 components and 1.46212 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=11.46 mas, bmaj=44 mas, bpa=-13.19 degrees ! Estimated noise=1379.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0298532 Jy ! Component: 100 - total flux cleaned = 0.0347947 Jy ! Component: 150 - total flux cleaned = 0.0383115 Jy ! Component: 200 - total flux cleaned = 0.0414822 Jy ! Total flux subtracted in 200 components = 0.0414822 Jy ! Clean residual min=-0.190694 max=0.187158 Jy/beam ! Clean residual mean=-0.002182 rms=0.060837 Jy/beam ! Combined flux in latest and established models = 1.5036 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00285413 Jy ! Component: 100 - total flux cleaned = 0.00548981 Jy ! Component: 150 - total flux cleaned = 0.00795315 Jy ! Component: 200 - total flux cleaned = 0.0101977 Jy ! Total flux subtracted in 200 components = 0.0101977 Jy ! Clean residual min=-0.191068 max=0.183138 Jy/beam ! Clean residual mean=-0.002051 rms=0.060425 Jy/beam ! Combined flux in latest and established models = 1.5138 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 94 components and 1.5138 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=19.76 mas, bpa=-24.33 degrees ! Estimated noise=1179.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00422108 Jy ! Component: 100 - total flux cleaned = -0.000761763 Jy ! Component: 150 - total flux cleaned = 0.000972947 Jy ! Component: 200 - total flux cleaned = 0.00307163 Jy ! Total flux subtracted in 200 components = 0.00307163 Jy ! Clean residual min=-0.151962 max=0.125783 Jy/beam ! Clean residual mean=-0.001256 rms=0.041538 Jy/beam ! Combined flux in latest and established models = 1.51687 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 107 components and 1.51687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.447776Jy sigma=0.001915 ! Fit after self-cal, rms=0.454855Jy sigma=0.001905 wmodel J0010-4153_S_2017_09_26_pus_map.mod ! Writing 107 model components to file: J0010-4153_S_2017_09_26_pus_map.mod wobs J0010-4153_S_2017_09_26_pus_uvs.fits ! Writing UV FITS file: J0010-4153_S_2017_09_26_pus_uvs.fits wwins J0010-4153_S_2017_09_26_pus_map.win ! wwins: Wrote 1 windows to J0010-4153_S_2017_09_26_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0366116 Jy ! Component: 100 - total flux cleaned = -0.0214337 Jy ! Component: 150 - total flux cleaned = 0.00617922 Jy ! Component: 200 - total flux cleaned = 0.0221268 Jy ! Component: 250 - total flux cleaned = 0.0325878 Jy ! Component: 300 - total flux cleaned = 0.0425154 Jy ! Component: 350 - total flux cleaned = 0.0493084 Jy ! Component: 400 - total flux cleaned = 0.0597453 Jy ! Component: 450 - total flux cleaned = 0.0709927 Jy ! Component: 500 - total flux cleaned = 0.0793868 Jy ! Component: 550 - total flux cleaned = 0.0874934 Jy ! Component: 600 - total flux cleaned = 0.088654 Jy ! Component: 650 - total flux cleaned = 0.0897613 Jy ! Component: 700 - total flux cleaned = 0.0939091 Jy ! Component: 750 - total flux cleaned = 0.0918546 Jy ! Component: 800 - total flux cleaned = 0.0957592 Jy ! Component: 850 - total flux cleaned = 0.0976652 Jy ! Component: 900 - total flux cleaned = 0.100406 Jy ! Component: 950 - total flux cleaned = 0.102186 Jy ! Component: 1000 - total flux cleaned = 0.103918 Jy ! Component: 1050 - total flux cleaned = 0.108105 Jy ! Component: 1100 - total flux cleaned = 0.108916 Jy ! Component: 1150 - total flux cleaned = 0.112866 Jy ! Component: 1200 - total flux cleaned = 0.112846 Jy ! Component: 1250 - total flux cleaned = 0.115095 Jy ! Component: 1300 - total flux cleaned = 0.118002 Jy ! Component: 1350 - total flux cleaned = 0.119414 Jy ! Component: 1400 - total flux cleaned = 0.121493 Jy ! Component: 1450 - total flux cleaned = 0.122843 Jy ! Component: 1500 - total flux cleaned = 0.126124 Jy ! Component: 1550 - total flux cleaned = 0.12992 Jy ! Component: 1600 - total flux cleaned = 0.131157 Jy ! Component: 1650 - total flux cleaned = 0.134794 Jy ! Component: 1700 - total flux cleaned = 0.137756 Jy ! Component: 1750 - total flux cleaned = 0.14179 Jy ! Component: 1800 - total flux cleaned = 0.145155 Jy ! Component: 1850 - total flux cleaned = 0.146793 Jy ! Component: 1900 - total flux cleaned = 0.151062 Jy ! Component: 1950 - total flux cleaned = 0.15366 Jy ! Component: 2000 - total flux cleaned = 0.15773 Jy ! Component: 2050 - total flux cleaned = 0.15922 Jy ! Component: 2100 - total flux cleaned = 0.162641 Jy ! Component: 2150 - total flux cleaned = 0.163601 Jy ! Component: 2200 - total flux cleaned = 0.165485 Jy ! Component: 2250 - total flux cleaned = 0.165946 Jy ! Component: 2300 - total flux cleaned = 0.166402 Jy ! Component: 2350 - total flux cleaned = 0.166396 Jy ! Component: 2400 - total flux cleaned = 0.166392 Jy ! Component: 2450 - total flux cleaned = 0.165966 Jy ! Component: 2500 - total flux cleaned = 0.166389 Jy ! Component: 2550 - total flux cleaned = 0.165969 Jy ! Component: 2600 - total flux cleaned = 0.164733 Jy ! Component: 2650 - total flux cleaned = 0.163115 Jy ! Component: 2700 - total flux cleaned = 0.162317 Jy ! Component: 2750 - total flux cleaned = 0.162313 Jy ! Component: 2800 - total flux cleaned = 0.161532 Jy ! Component: 2850 - total flux cleaned = 0.161148 Jy ! Component: 2900 - total flux cleaned = 0.161531 Jy ! Component: 2950 - total flux cleaned = 0.160786 Jy ! Component: 3000 - total flux cleaned = 0.16042 Jy ! Component: 3050 - total flux cleaned = 0.16152 Jy ! Component: 3100 - total flux cleaned = 0.162238 Jy ! Component: 3150 - total flux cleaned = 0.161523 Jy ! Component: 3200 - total flux cleaned = 0.162233 Jy ! Component: 3250 - total flux cleaned = 0.161181 Jy ! Component: 3300 - total flux cleaned = 0.161183 Jy ! Component: 3350 - total flux cleaned = 0.159801 Jy ! Component: 3400 - total flux cleaned = 0.159459 Jy ! Component: 3450 - total flux cleaned = 0.158778 Jy ! Component: 3500 - total flux cleaned = 0.15709 Jy ! Component: 3550 - total flux cleaned = 0.156088 Jy ! Component: 3600 - total flux cleaned = 0.155093 Jy ! Component: 3650 - total flux cleaned = 0.154433 Jy ! Component: 3700 - total flux cleaned = 0.153777 Jy ! Component: 3750 - total flux cleaned = 0.152146 Jy ! Component: 3800 - total flux cleaned = 0.151174 Jy ! Component: 3850 - total flux cleaned = 0.150206 Jy ! Component: 3900 - total flux cleaned = 0.148922 Jy ! Component: 3950 - total flux cleaned = 0.147963 Jy ! Component: 4000 - total flux cleaned = 0.147646 Jy ! Component: 4050 - total flux cleaned = 0.147011 Jy ! Total flux subtracted in 4096 components = 0.147329 Jy ! Clean residual min=-0.018998 max=0.025837 Jy/beam ! Clean residual mean=0.000318 rms=0.007455 Jy/beam ! Combined flux in latest and established models = 1.6642 Jy keep ! Adding 732 model components to the UV plane model. ! The established model now contains 839 components and 1.6642 Jy ![Exited script file: muppet] wmap "J0010-4153_S_2017_09_26_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.613 x 19.76 at -24.33 degrees (North through East) ! Clean map min=-0.094057 max=0.43418 Jy/beam ! Writing clean map to FITS file: J0010-4153_S_2017_09_26_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.434179 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00779581 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -5.3866 5.3866 10.7732 21.5464 43.0928 86.1855 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0233 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.434 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.613 x 19.76 at -24.33 degrees (North through East) ! Clean map min=-0.094057 max=0.43418 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010-4153_S_2017_09_26_pus_uvs.log closed on Sat May 11 12:52:53 2019