! Started logfile: J0010-4153_S_2017_01_21_pus_uvs.log on Sun May 5 15:42:38 2019 obs J0010-4153_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0010-4153_S_2017_01_21_pus_uva.fits ! AN table 1: 72 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.269676 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0010-4153 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 2796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010-4153_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 367 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.694614Jy sigma=0.003734 ! Fit after self-cal, rms=0.685396Jy sigma=0.003686 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.722 mas, bmaj=26.89 mas, bpa=3.171 degrees ! Estimated noise=5788.8 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.521326 Jy ! Component: 100 - total flux cleaned = 0.774081 Jy ! Total flux subtracted in 100 components = 0.774081 Jy ! Clean residual min=-0.129456 max=0.140441 Jy/beam ! Clean residual mean=0.008782 rms=0.058311 Jy/beam ! Combined flux in latest and established models = 0.774081 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 24 components and 0.774081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.611551Jy sigma=0.003217 ! Fit after self-cal, rms=0.608171Jy sigma=0.003194 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.376 mas, bmaj=26.61 mas, bpa=4.015 degrees ! Estimated noise=2633.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294978 Jy ! Component: 100 - total flux cleaned = 0.450135 Jy ! Component: 150 - total flux cleaned = 0.515037 Jy ! Component: 200 - total flux cleaned = 0.536959 Jy ! Total flux subtracted in 200 components = 0.536959 Jy ! Clean residual min=-0.075308 max=0.076278 Jy/beam ! Clean residual mean=0.002219 rms=0.039904 Jy/beam ! Combined flux in latest and established models = 1.31104 Jy ! Performing phase self-cal ! Adding 92 model components to the UV plane model. ! The established model now contains 116 components and 1.31104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.257071Jy sigma=0.001335 ! Fit after self-cal, rms=0.248567Jy sigma=0.001290 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.86 HN 1.00* LA 1.08 ! MK 0.98 NL 1.00* OV 0.94 PT 0.85 ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.88 HN 1.00* LA 1.02 ! MK 1.05 NL 1.00* OV 1.02 PT 0.87 ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.93 HN 1.00* LA 0.92 ! MK 1.15 NL 1.00* OV 0.92 PT 0.90 ! SC 1.00* ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 1.00* LA 1.00* ! MK 1.10 NL 1.00* OV 0.98 PT 1.07 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.248567Jy sigma=0.001290 ! Fit after self-cal, rms=0.167284Jy sigma=0.000917 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.485 mas, bmaj=26.42 mas, bpa=4.298 degrees ! Estimated noise=2433.69 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0576657 Jy ! Component: 100 - total flux cleaned = 0.0810126 Jy ! Component: 150 - total flux cleaned = 0.0924455 Jy ! Component: 200 - total flux cleaned = 0.0924003 Jy ! Total flux subtracted in 200 components = 0.0924003 Jy ! Clean residual min=-0.015524 max=0.015543 Jy/beam ! Clean residual mean=-0.000178 rms=0.005843 Jy/beam ! Combined flux in latest and established models = 1.40344 Jy ! Performing phase self-cal ! Adding 64 model components to the UV plane model. ! The established model now contains 180 components and 1.40344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.138495Jy sigma=0.000770 ! Fit after self-cal, rms=0.136781Jy sigma=0.000761 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136781Jy sigma=0.000761 ! Fit after self-cal, rms=0.133025Jy sigma=0.000753 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.5 mas, bmaj=26.38 mas, bpa=4.267 degrees ! Estimated noise=2412.63 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0218812 Jy ! Component: 100 - total flux cleaned = 0.025266 Jy ! Component: 150 - total flux cleaned = 0.0259043 Jy ! Component: 200 - total flux cleaned = 0.0247762 Jy ! Total flux subtracted in 200 components = 0.0247762 Jy ! Clean residual min=-0.009695 max=0.009674 Jy/beam ! Clean residual mean=0.000011 rms=0.003654 Jy/beam ! Combined flux in latest and established models = 1.42822 Jy selfcal ! Performing phase self-cal ! Adding 63 model components to the UV plane model. ! The established model now contains 234 components and 1.42822 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127333Jy sigma=0.000722 ! Fit after self-cal, rms=0.126100Jy sigma=0.000717 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00549521 Jy ! Component: 100 - total flux cleaned = -0.00551847 Jy ! Component: 150 - total flux cleaned = -0.00428824 Jy ! Component: 200 - total flux cleaned = -0.00308607 Jy ! Total flux subtracted in 200 components = -0.00308607 Jy ! Clean residual min=-0.006567 max=0.006833 Jy/beam ! Clean residual mean=0.000240 rms=0.002244 Jy/beam ! Combined flux in latest and established models = 1.42513 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 275 components and 1.42513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123780Jy sigma=0.000704 ! Fit after self-cal, rms=0.123364Jy sigma=0.000702 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123364Jy sigma=0.000702 ! Fit after self-cal, rms=0.122591Jy sigma=0.000700 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.508 mas, bmaj=26.35 mas, bpa=4.263 degrees ! Estimated noise=2406.77 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00671555 Jy ! Component: 100 - total flux cleaned = 0.00818637 Jy ! Component: 150 - total flux cleaned = 0.00956504 Jy ! Component: 200 - total flux cleaned = 0.0109428 Jy ! Total flux subtracted in 200 components = 0.0109428 Jy ! Clean residual min=-0.004639 max=0.004591 Jy/beam ! Clean residual mean=0.000167 rms=0.001645 Jy/beam ! Combined flux in latest and established models = 1.43607 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 316 components and 1.43607 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121267Jy sigma=0.000693 ! Fit after self-cal, rms=0.121001Jy sigma=0.000692 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000813608 Jy ! Component: 100 - total flux cleaned = 0.00088004 Jy ! Component: 150 - total flux cleaned = 0.00221815 Jy ! Component: 200 - total flux cleaned = 0.0039602 Jy ! Total flux subtracted in 200 components = 0.0039602 Jy ! Clean residual min=-0.003686 max=0.003645 Jy/beam ! Clean residual mean=0.000199 rms=0.001304 Jy/beam ! Combined flux in latest and established models = 1.44003 Jy ! Performing phase self-cal ! Adding 59 model components to the UV plane model. ! The established model now contains 371 components and 1.44003 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120276Jy sigma=0.000688 ! Fit after self-cal, rms=0.120140Jy sigma=0.000687 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120140Jy sigma=0.000687 ! Fit after self-cal, rms=0.120231Jy sigma=0.000687 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.227 mas, bmaj=30.23 mas, bpa=15.25 degrees ! Estimated noise=2976.12 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295707 Jy ! Component: 100 - total flux cleaned = 0.00556021 Jy ! Component: 150 - total flux cleaned = 0.00684508 Jy ! Component: 200 - total flux cleaned = 0.0066884 Jy ! Total flux subtracted in 200 components = 0.0066884 Jy ! Clean residual min=-0.002614 max=0.002629 Jy/beam ! Clean residual mean=0.000356 rms=0.000919 Jy/beam ! Combined flux in latest and established models = 1.44672 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 408 components and 1.44672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119825Jy sigma=0.000684 ! Fit after self-cal, rms=0.119726Jy sigma=0.000684 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000961931 Jy ! Component: 100 - total flux cleaned = 0.000350252 Jy ! Component: 150 - total flux cleaned = 0.00115241 Jy ! Component: 200 - total flux cleaned = 0.00167672 Jy ! Total flux subtracted in 200 components = 0.00167672 Jy ! Clean residual min=-0.002176 max=0.002219 Jy/beam ! Clean residual mean=0.000123 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 1.4484 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 444 components and 1.4484 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119522Jy sigma=0.000682 ! Fit after self-cal, rms=0.119470Jy sigma=0.000682 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.509 mas, bmaj=26.37 mas, bpa=4.255 degrees ! Estimated noise=2409.55 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.509 x 26.37 at 4.255 degrees (North through East) ! Clean map min=-0.054894 max=0.54345 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.119470Jy sigma=0.000682 ! Fit after self-cal, rms=0.097030Jy sigma=0.000534 ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=26.4 mas, bpa=4.249 degrees ! Estimated noise=2403.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000283385 Jy ! Component: 100 - total flux cleaned = 0.000273773 Jy ! Component: 150 - total flux cleaned = 0.000600405 Jy ! Component: 200 - total flux cleaned = 0.00125674 Jy ! Total flux subtracted in 200 components = 0.00125674 Jy ! Clean residual min=-0.002824 max=0.002745 Jy/beam ! Clean residual mean=0.000037 rms=0.000920 Jy/beam ! Combined flux in latest and established models = 1.44965 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 485 components and 1.44965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096604Jy sigma=0.000531 ! Fit after self-cal, rms=0.096534Jy sigma=0.000531 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00136612 Jy ! Component: 100 - total flux cleaned = -0.00150085 Jy ! Component: 150 - total flux cleaned = -0.00149666 Jy ! Component: 200 - total flux cleaned = -0.00176288 Jy ! Total flux subtracted in 200 components = -0.00176288 Jy ! Clean residual min=-0.002276 max=0.002252 Jy/beam ! Clean residual mean=0.000092 rms=0.000769 Jy/beam ! Combined flux in latest and established models = 1.44789 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 520 components and 1.44789 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096231Jy sigma=0.000529 ! Fit after self-cal, rms=0.096162Jy sigma=0.000529 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096162Jy sigma=0.000529 ! Fit after self-cal, rms=0.096010Jy sigma=0.000529 print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.769 mas, bmaj=26.59 mas, bpa=3.335 degrees ! Estimated noise=5453.72 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.486941 Jy ! Component: 100 - total flux cleaned = 0.727803 Jy ! Component: 150 - total flux cleaned = 0.921191 Jy ! Component: 200 - total flux cleaned = 1.0622 Jy ! Total flux subtracted in 200 components = 1.0622 Jy ! Clean residual min=-0.103672 max=0.106078 Jy/beam ! Clean residual mean=0.003671 rms=0.036789 Jy/beam ! Combined flux in latest and established models = 1.0622 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 43 model components to the UV plane model. ! The established model now contains 43 components and 1.0622 Jy ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=26.41 mas, bpa=4.247 degrees ! Estimated noise=2402.17 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.154083 Jy ! Component: 100 - total flux cleaned = 0.222627 Jy ! Component: 150 - total flux cleaned = 0.240248 Jy ! Component: 200 - total flux cleaned = 0.24648 Jy ! Total flux subtracted in 200 components = 0.24648 Jy ! Clean residual min=-0.050074 max=0.051408 Jy/beam ! Clean residual mean=-0.000628 rms=0.021456 Jy/beam ! Combined flux in latest and established models = 1.30868 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 111 components and 1.30868 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.219 mas, bmaj=30.21 mas, bpa=15.2 degrees ! Estimated noise=2973.86 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00289051 Jy ! Component: 100 - total flux cleaned = -0.00192286 Jy ! Component: 150 - total flux cleaned = 0.01424 Jy ! Component: 200 - total flux cleaned = 0.0170121 Jy ! Total flux subtracted in 200 components = 0.0170121 Jy ! Clean residual min=-0.022051 max=0.021882 Jy/beam ! Clean residual mean=-0.002149 rms=0.008374 Jy/beam ! Combined flux in latest and established models = 1.32569 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00259189 Jy ! Component: 100 - total flux cleaned = -0.00821643 Jy ! Component: 150 - total flux cleaned = -0.0145845 Jy ! Component: 200 - total flux cleaned = -0.0219212 Jy ! Total flux subtracted in 200 components = -0.0219212 Jy ! Clean residual min=-0.032557 max=0.032777 Jy/beam ! Clean residual mean=-0.004916 rms=0.011132 Jy/beam ! Combined flux in latest and established models = 1.30377 Jy ! Adding 113 model components to the UV plane model. ! The established model now contains 223 components and 1.30377 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.502 mas, bmaj=26.41 mas, bpa=4.247 degrees ! Estimated noise=2402.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132492 Jy ! Component: 100 - total flux cleaned = 0.0121687 Jy ! Component: 150 - total flux cleaned = 0.00292854 Jy ! Component: 200 - total flux cleaned = -0.00484993 Jy ! Total flux subtracted in 200 components = -0.00484993 Jy ! Clean residual min=-0.021330 max=0.020518 Jy/beam ! Clean residual mean=0.000186 rms=0.007107 Jy/beam ! Combined flux in latest and established models = 1.29892 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 241 components and 1.29892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115332Jy sigma=0.000644 ! Fit after self-cal, rms=0.112291Jy sigma=0.000625 wmodel J0010-4153_S_2017_01_21_pus_map.mod ! Writing 241 model components to file: J0010-4153_S_2017_01_21_pus_map.mod wobs J0010-4153_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0010-4153_S_2017_01_21_pus_uvs.fits wwins J0010-4153_S_2017_01_21_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0010-4153_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.502 x 26.41 at 4.247 degrees (North through East) ! Clean map min=-0.054874 max=0.42083 Jy/beam ! Writing clean map to FITS file: J0010-4153_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.420827 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00677985 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.83323 4.83323 9.66647 19.3329 38.6659 77.3317 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0203 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.42 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.502 x 26.41 at 4.247 degrees (North through East) ! Clean map min=-0.054874 max=0.42083 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010-4153_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:42:42 2019