! Started logfile: J0010-3054_S_2017_02_19_pus_uvs.log on Sat May 4 18:38:40 2019 obs J0010-3054_S_2017_02_19_pus_uva.fits ! Reading UV FITS file: J0010-3054_S_2017_02_19_pus_uva.fits ! AN table 1: 76 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.720175 visibilities/baseline/integration-bin. ! Found source: J0010-3054 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 482 lines of history. ! ! Reading 9852 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010-3054_S_2017_02_19_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 113 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 392 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.966642Jy sigma=0.005709 ! Fit after self-cal, rms=0.923019Jy sigma=0.005492 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.319 mas, bmaj=6.681 mas, bpa=-7.049 degrees ! Estimated noise=2306.78 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0619813 Jy ! Component: 100 - total flux cleaned = 0.0768055 Jy ! Total flux subtracted in 100 components = 0.0768055 Jy ! Clean residual min=-0.006539 max=0.006692 Jy/beam ! Clean residual mean=0.000007 rms=0.001625 Jy/beam ! Combined flux in latest and established models = 0.0768055 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0768055 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123906Jy sigma=0.000660 ! Fit after self-cal, rms=0.123569Jy sigma=0.000658 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.808 mas, bmaj=7.476 mas, bpa=-5.754 degrees ! Estimated noise=1349.77 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00896202 Jy ! Component: 100 - total flux cleaned = 0.0132854 Jy ! Component: 150 - total flux cleaned = 0.0155962 Jy ! Component: 200 - total flux cleaned = 0.0168635 Jy ! Total flux subtracted in 200 components = 0.0168635 Jy ! Clean residual min=-0.003949 max=0.003987 Jy/beam ! Clean residual mean=0.000008 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.0936689 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 27 components and 0.0936689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122816Jy sigma=0.000655 ! Fit after self-cal, rms=0.122730Jy sigma=0.000655 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.09 KP 1.04 ! LA 1.00 MK 1.00 NL 0.84 OV 1.05 ! PT 1.00* SC 0.98 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.25 FD 1.05 HN 1.11 KP 1.02 ! LA 1.03 MK 1.04 NL 1.03 OV 1.03 ! PT 1.00* SC 0.97 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.03 HN 1.19 KP 0.88 ! LA 0.75 MK 1.05 NL 1.11 OV 0.96 ! PT 1.00* SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.06 HN 1.00* KP 1.00* ! LA 0.78 MK 1.06 NL 1.00* OV 1.02 ! PT 1.00* SC 1.00* ! ! ! Fit before self-cal, rms=0.122730Jy sigma=0.000655 ! Fit after self-cal, rms=0.120891Jy sigma=0.000651 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.841 mas, bmaj=7.506 mas, bpa=-5.508 degrees ! Estimated noise=1354.16 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000180553 Jy ! Component: 100 - total flux cleaned = 0.000201557 Jy ! Component: 150 - total flux cleaned = 0.000202042 Jy ! Component: 200 - total flux cleaned = 0.000202786 Jy ! Total flux subtracted in 200 components = 0.000202786 Jy ! Clean residual min=-0.003223 max=0.003631 Jy/beam ! Clean residual mean=0.000002 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.0938717 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.0938717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120883Jy sigma=0.000651 ! Fit after self-cal, rms=0.120945Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120945Jy sigma=0.000651 ! Fit after self-cal, rms=0.122822Jy sigma=0.000650 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.849 mas, bmaj=7.532 mas, bpa=-5.456 degrees ! Estimated noise=1354.11 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00012645 Jy ! Component: 100 - total flux cleaned = -0.000125703 Jy ! Component: 150 - total flux cleaned = -0.000125146 Jy ! Component: 200 - total flux cleaned = -0.000112586 Jy ! Total flux subtracted in 200 components = -0.000112586 Jy ! Clean residual min=-0.002937 max=0.003491 Jy/beam ! Clean residual mean=-0.000004 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.0937591 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.0937591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122818Jy sigma=0.000650 ! Fit after self-cal, rms=0.122926Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (118, -78). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00256237 Jy ! Component: 100 - total flux cleaned = 0.00250191 Jy ! Component: 150 - total flux cleaned = 0.00250529 Jy ! Component: 200 - total flux cleaned = 0.00250706 Jy ! Total flux subtracted in 200 components = 0.00250706 Jy ! Clean residual min=-0.002915 max=0.002881 Jy/beam ! Clean residual mean=-0.000003 rms=0.000758 Jy/beam ! Combined flux in latest and established models = 0.0962662 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 61 components and 0.0962662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122853Jy sigma=0.000649 ! Fit after self-cal, rms=0.122842Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.122842Jy sigma=0.000648 ! Fit after self-cal, rms=0.123400Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.846 mas, bmaj=7.531 mas, bpa=-5.486 degrees ! Estimated noise=1350.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011547 Jy ! Component: 100 - total flux cleaned = 0.00114986 Jy ! Component: 150 - total flux cleaned = 0.0011519 Jy ! Component: 200 - total flux cleaned = 0.00111986 Jy ! Total flux subtracted in 200 components = 0.00111986 Jy ! Clean residual min=-0.002829 max=0.002756 Jy/beam ! Clean residual mean=-0.000005 rms=0.000737 Jy/beam ! Combined flux in latest and established models = 0.097386 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 65 components and 0.097386 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123364Jy sigma=0.000648 ! Fit after self-cal, rms=0.123393Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00030947 Jy ! Component: 100 - total flux cleaned = 0.000311166 Jy ! Component: 150 - total flux cleaned = 0.000281442 Jy ! Component: 200 - total flux cleaned = 0.000281537 Jy ! Total flux subtracted in 200 components = 0.000281537 Jy ! Clean residual min=-0.002820 max=0.002736 Jy/beam ! Clean residual mean=-0.000005 rms=0.000733 Jy/beam ! Combined flux in latest and established models = 0.0976676 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 73 components and 0.0976676 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123375Jy sigma=0.000648 ! Fit after self-cal, rms=0.123373Jy sigma=0.000648 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123373Jy sigma=0.000648 ! Fit after self-cal, rms=0.123410Jy sigma=0.000648 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.494 mas, bmaj=18.92 mas, bpa=1.546 degrees ! Estimated noise=1798.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000830205 Jy ! Component: 100 - total flux cleaned = 0.000910753 Jy ! Component: 150 - total flux cleaned = 0.000910899 Jy ! Component: 200 - total flux cleaned = 0.000910351 Jy ! Total flux subtracted in 200 components = 0.000910351 Jy ! Clean residual min=-0.002602 max=0.003489 Jy/beam ! Clean residual mean=-0.000012 rms=0.000865 Jy/beam ! Combined flux in latest and established models = 0.0985779 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 82 components and 0.0985779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123410Jy sigma=0.000648 ! Fit after self-cal, rms=0.123418Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000262852 Jy ! Component: 100 - total flux cleaned = 0.000243936 Jy ! Component: 150 - total flux cleaned = 0.000226454 Jy ! Component: 200 - total flux cleaned = 0.000178119 Jy ! Total flux subtracted in 200 components = 0.000178119 Jy ! Clean residual min=-0.002622 max=0.003486 Jy/beam ! Clean residual mean=-0.000011 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.098756 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 85 components and 0.098756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123421Jy sigma=0.000648 ! Fit after self-cal, rms=0.123422Jy sigma=0.000648 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=7.531 mas, bpa=-5.571 degrees ! Estimated noise=1347.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.843 x 7.531 at -5.571 degrees (North through East) ! Clean map min=-0.0026887 max=0.080889 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.348 mas, bmaj=6.684 mas, bpa=-6.941 degrees ! Estimated noise=2314.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0615181 Jy ! Component: 100 - total flux cleaned = 0.076854 Jy ! Component: 150 - total flux cleaned = 0.0848938 Jy ! Component: 200 - total flux cleaned = 0.0890176 Jy ! Total flux subtracted in 200 components = 0.0890176 Jy ! Clean residual min=-0.005458 max=0.005415 Jy/beam ! Clean residual mean=-0.000002 rms=0.001329 Jy/beam ! Combined flux in latest and established models = 0.0890176 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0890176 Jy ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=7.531 mas, bpa=-5.571 degrees ! Estimated noise=1347.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00510084 Jy ! Component: 100 - total flux cleaned = 0.00665798 Jy ! Component: 150 - total flux cleaned = 0.00690981 Jy ! Component: 200 - total flux cleaned = 0.00724639 Jy ! Total flux subtracted in 200 components = 0.00724639 Jy ! Clean residual min=-0.003026 max=0.002664 Jy/beam ! Clean residual mean=-0.000006 rms=0.000761 Jy/beam ! Combined flux in latest and established models = 0.0962639 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 39 components and 0.096264 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.494 mas, bmaj=18.92 mas, bpa=1.546 degrees ! Estimated noise=1798.5 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169449 Jy ! Component: 100 - total flux cleaned = 0.00187797 Jy ! Component: 150 - total flux cleaned = 0.0019734 Jy ! Component: 200 - total flux cleaned = 0.0020491 Jy ! Total flux subtracted in 200 components = 0.0020491 Jy ! Clean residual min=-0.002626 max=0.003435 Jy/beam ! Clean residual mean=-0.000011 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.098313 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.71448e-06 Jy ! Component: 100 - total flux cleaned = -3.68308e-05 Jy ! Component: 150 - total flux cleaned = -7.24472e-05 Jy ! Component: 200 - total flux cleaned = -0.000104471 Jy ! Total flux subtracted in 200 components = -0.000104471 Jy ! Clean residual min=-0.002611 max=0.003437 Jy/beam ! Clean residual mean=-0.000010 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.0982086 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 54 components and 0.0982086 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=7.531 mas, bpa=-5.571 degrees ! Estimated noise=1347.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000396438 Jy ! Component: 100 - total flux cleaned = -0.000440862 Jy ! Component: 150 - total flux cleaned = -0.000481465 Jy ! Component: 200 - total flux cleaned = -0.000516978 Jy ! Total flux subtracted in 200 components = -0.000516978 Jy ! Clean residual min=-0.002850 max=0.002699 Jy/beam ! Clean residual mean=-0.000006 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.0976916 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 71 components and 0.0976916 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123423Jy sigma=0.000648 ! Fit after self-cal, rms=0.123421Jy sigma=0.000648 wmodel J0010-3054_S_2017_02_19_pus_map.mod ! Writing 71 model components to file: J0010-3054_S_2017_02_19_pus_map.mod wobs J0010-3054_S_2017_02_19_pus_uvs.fits ! Writing UV FITS file: J0010-3054_S_2017_02_19_pus_uvs.fits wwins J0010-3054_S_2017_02_19_pus_map.win ! wwins: Wrote 2 windows to J0010-3054_S_2017_02_19_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000436643 Jy ! Component: 100 - total flux cleaned = -0.000485525 Jy ! Component: 150 - total flux cleaned = -0.000808488 Jy ! Component: 200 - total flux cleaned = -0.00111955 Jy ! Component: 250 - total flux cleaned = -0.0013347 Jy ! Component: 300 - total flux cleaned = -0.00137622 Jy ! Component: 350 - total flux cleaned = -0.00141738 Jy ! Component: 400 - total flux cleaned = -0.0014174 Jy ! Component: 450 - total flux cleaned = -0.00149471 Jy ! Component: 500 - total flux cleaned = -0.0016067 Jy ! Component: 550 - total flux cleaned = -0.00142224 Jy ! Component: 600 - total flux cleaned = -0.00145767 Jy ! Component: 650 - total flux cleaned = -0.00131651 Jy ! Component: 700 - total flux cleaned = -0.00142037 Jy ! Component: 750 - total flux cleaned = -0.00138634 Jy ! Component: 800 - total flux cleaned = -0.00148683 Jy ! Component: 850 - total flux cleaned = -0.00148668 Jy ! Component: 900 - total flux cleaned = -0.0015844 Jy ! Component: 950 - total flux cleaned = -0.00180666 Jy ! Component: 1000 - total flux cleaned = -0.0018064 Jy ! Component: 1050 - total flux cleaned = -0.001807 Jy ! Component: 1100 - total flux cleaned = -0.00192845 Jy ! Component: 1150 - total flux cleaned = -0.00201838 Jy ! Component: 1200 - total flux cleaned = -0.00201895 Jy ! Component: 1250 - total flux cleaned = -0.00210647 Jy ! Component: 1300 - total flux cleaned = -0.00224941 Jy ! Component: 1350 - total flux cleaned = -0.00222095 Jy ! Component: 1400 - total flux cleaned = -0.00222137 Jy ! Component: 1450 - total flux cleaned = -0.00235779 Jy ! Component: 1500 - total flux cleaned = -0.00235751 Jy ! Component: 1550 - total flux cleaned = -0.00233069 Jy ! Component: 1600 - total flux cleaned = -0.0024097 Jy ! Component: 1650 - total flux cleaned = -0.0025136 Jy ! Component: 1700 - total flux cleaned = -0.00253949 Jy ! Component: 1750 - total flux cleaned = -0.00269158 Jy ! Component: 1800 - total flux cleaned = -0.00269133 Jy ! Component: 1850 - total flux cleaned = -0.00269159 Jy ! Component: 1900 - total flux cleaned = -0.00281424 Jy ! Component: 1950 - total flux cleaned = -0.00288659 Jy ! Component: 2000 - total flux cleaned = -0.00288663 Jy ! Component: 2050 - total flux cleaned = -0.00295775 Jy ! Component: 2100 - total flux cleaned = -0.00293464 Jy ! Component: 2150 - total flux cleaned = -0.00305101 Jy ! Component: 2200 - total flux cleaned = -0.00325794 Jy ! Component: 2250 - total flux cleaned = -0.00328084 Jy ! Component: 2300 - total flux cleaned = -0.00332605 Jy ! Component: 2350 - total flux cleaned = -0.00339332 Jy ! Component: 2400 - total flux cleaned = -0.00341551 Jy ! Component: 2450 - total flux cleaned = -0.00354749 Jy ! Component: 2500 - total flux cleaned = -0.00365621 Jy ! Component: 2550 - total flux cleaned = -0.0036991 Jy ! Component: 2600 - total flux cleaned = -0.00374145 Jy ! Component: 2650 - total flux cleaned = -0.00378376 Jy ! Component: 2700 - total flux cleaned = -0.00390947 Jy ! Component: 2750 - total flux cleaned = -0.00395107 Jy ! Component: 2800 - total flux cleaned = -0.00411573 Jy ! Component: 2850 - total flux cleaned = -0.00417707 Jy ! Component: 2900 - total flux cleaned = -0.00423773 Jy ! Component: 2950 - total flux cleaned = -0.00433808 Jy ! Component: 3000 - total flux cleaned = -0.00431816 Jy ! Component: 3050 - total flux cleaned = -0.00445602 Jy ! Component: 3100 - total flux cleaned = -0.00453425 Jy ! Component: 3150 - total flux cleaned = -0.00465084 Jy ! Component: 3200 - total flux cleaned = -0.00482403 Jy ! Component: 3250 - total flux cleaned = -0.00495786 Jy ! Component: 3300 - total flux cleaned = -0.00507157 Jy ! Component: 3350 - total flux cleaned = -0.00518444 Jy ! Component: 3400 - total flux cleaned = -0.00531511 Jy ! Component: 3450 - total flux cleaned = -0.00540776 Jy ! Component: 3500 - total flux cleaned = -0.00557317 Jy ! Component: 3550 - total flux cleaned = -0.00570087 Jy ! Component: 3600 - total flux cleaned = -0.00579159 Jy ! Component: 3650 - total flux cleaned = -0.00591754 Jy ! Component: 3700 - total flux cleaned = -0.00600667 Jy ! Component: 3750 - total flux cleaned = -0.0060774 Jy ! Component: 3800 - total flux cleaned = -0.0062178 Jy ! Component: 3850 - total flux cleaned = -0.00628761 Jy ! Component: 3900 - total flux cleaned = -0.00633961 Jy ! Component: 3950 - total flux cleaned = -0.00640851 Jy ! Component: 4000 - total flux cleaned = -0.00640869 Jy ! Component: 4050 - total flux cleaned = -0.00647688 Jy ! Total flux subtracted in 4096 components = -0.00652757 Jy ! Clean residual min=-0.001154 max=0.000989 Jy/beam ! Clean residual mean=-0.000004 rms=0.000304 Jy/beam ! Combined flux in latest and established models = 0.091164 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 359 components and 0.091164 Jy ![Exited script file: muppet] wmap "J0010-3054_S_2017_02_19_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.843 x 7.531 at -5.571 degrees (North through East) ! Clean map min=-0.0024938 max=0.081656 Jy/beam ! Writing clean map to FITS file: J0010-3054_S_2017_02_19_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0816559 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000302009 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.10957 1.10957 2.21914 4.43827 8.87654 17.7531 35.5062 71.0123 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.843 x 7.531 at -5.571 degrees (North through East) ! Clean map min=-0.0024938 max=0.081656 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010-3054_S_2017_02_19_pus_uvs.log closed on Sat May 4 18:38:44 2019