! Started logfile: J0010+4412_S_2017_03_23_pus_uvs.log on Mon May 13 09:44:01 2019 obs J0010+4412_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0010+4412_S_2017_03_23_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.894395 visibilities/baseline/integration-bin. ! Found source: J0010+4412 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 18192 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010+4412_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 63 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 436 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.898400Jy sigma=0.008025 ! Fit after self-cal, rms=0.887229Jy sigma=0.007933 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.931 mas, bmaj=4.978 mas, bpa=-11.17 degrees ! Estimated noise=1018.82 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0882454 Jy ! Component: 100 - total flux cleaned = 0.113751 Jy ! Total flux subtracted in 100 components = 0.113751 Jy ! Clean residual min=-0.005739 max=0.010616 Jy/beam ! Clean residual mean=0.000023 rms=0.002027 Jy/beam ! Combined flux in latest and established models = 0.113751 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.113751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102614Jy sigma=0.000882 ! Fit after self-cal, rms=0.102587Jy sigma=0.000882 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.491 mas, bmaj=5.713 mas, bpa=-8.622 degrees ! Estimated noise=646.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131529 Jy ! Component: 100 - total flux cleaned = 0.0194078 Jy ! Component: 150 - total flux cleaned = 0.0232665 Jy ! Component: 200 - total flux cleaned = 0.0257977 Jy ! Total flux subtracted in 200 components = 0.0257977 Jy ! Clean residual min=-0.004046 max=0.004826 Jy/beam ! Clean residual mean=0.000016 rms=0.001355 Jy/beam ! Combined flux in latest and established models = 0.139549 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 36 components and 0.139549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100888Jy sigma=0.000868 ! Fit after self-cal, rms=0.100871Jy sigma=0.000868 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.81 HN 0.99 KP 1.11 ! LA 0.85 MK 1.08 NL 0.92 OV 1.08 ! PT 1.05 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 1.00 KP 1.00 ! LA 0.98 MK 1.06 NL 1.03 OV 1.07 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.05 HN 1.00 KP 0.88 ! LA 0.77 MK 1.04 NL 1.16 OV 0.98 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.10 HN 0.92 KP 1.00* ! LA 0.84 MK 1.36 NL 1.00* OV 2.43 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.100871Jy sigma=0.000868 ! Fit after self-cal, rms=0.093161Jy sigma=0.000855 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.558 mas, bmaj=5.777 mas, bpa=-8.077 degrees ! Estimated noise=648.793 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000305085 Jy ! Component: 100 - total flux cleaned = -0.000303808 Jy ! Component: 150 - total flux cleaned = -0.000239074 Jy ! Component: 200 - total flux cleaned = -0.000209783 Jy ! Total flux subtracted in 200 components = -0.000209783 Jy ! Clean residual min=-0.003396 max=0.004265 Jy/beam ! Clean residual mean=0.000014 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 0.139339 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 42 components and 0.139339 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093134Jy sigma=0.000855 ! Fit after self-cal, rms=0.093302Jy sigma=0.000855 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093302Jy sigma=0.000855 ! Fit after self-cal, rms=0.106523Jy sigma=0.000830 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.556 mas, bmaj=5.828 mas, bpa=-6.926 degrees ! Estimated noise=662.709 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00085175 Jy ! Component: 100 - total flux cleaned = 0.000966691 Jy ! Component: 150 - total flux cleaned = 0.000931867 Jy ! Component: 200 - total flux cleaned = 0.000832862 Jy ! Total flux subtracted in 200 components = 0.000832862 Jy ! Clean residual min=-0.002186 max=0.006109 Jy/beam ! Clean residual mean=0.000000 rms=0.000859 Jy/beam ! Combined flux in latest and established models = 0.140172 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 57 components and 0.140172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106300Jy sigma=0.000830 ! Fit after self-cal, rms=0.107207Jy sigma=0.000825 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.5, -76). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00536636 Jy ! Component: 100 - total flux cleaned = 0.0076574 Jy ! Component: 150 - total flux cleaned = 0.00863998 Jy ! Component: 200 - total flux cleaned = 0.0090922 Jy ! Total flux subtracted in 200 components = 0.0090922 Jy ! Clean residual min=-0.002768 max=0.005326 Jy/beam ! Clean residual mean=0.000007 rms=0.000812 Jy/beam ! Combined flux in latest and established models = 0.149264 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 83 components and 0.149264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106652Jy sigma=0.000823 ! Fit after self-cal, rms=0.106562Jy sigma=0.000823 ! Inverting map ! Added new window around map position (-10.5, 76.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00458268 Jy ! Component: 100 - total flux cleaned = 0.00626076 Jy ! Component: 150 - total flux cleaned = 0.00665911 Jy ! Component: 200 - total flux cleaned = 0.00699955 Jy ! Total flux subtracted in 200 components = 0.00699955 Jy ! Clean residual min=-0.002726 max=0.003419 Jy/beam ! Clean residual mean=0.000010 rms=0.000730 Jy/beam ! Combined flux in latest and established models = 0.156263 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 107 components and 0.156263 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106136Jy sigma=0.000821 ! Fit after self-cal, rms=0.106005Jy sigma=0.000821 ! Inverting map ! Added new window around map position (-53.5, -57.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274959 Jy ! Component: 100 - total flux cleaned = 0.00318771 Jy ! Component: 150 - total flux cleaned = 0.00366252 Jy ! Component: 200 - total flux cleaned = 0.0038519 Jy ! Total flux subtracted in 200 components = 0.0038519 Jy ! Clean residual min=-0.002592 max=0.003062 Jy/beam ! Clean residual mean=0.000007 rms=0.000700 Jy/beam ! Combined flux in latest and established models = 0.160115 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 128 components and 0.160115 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105832Jy sigma=0.000820 ! Fit after self-cal, rms=0.105779Jy sigma=0.000820 ! Inverting map ! Added new window around map position (115.5, -103). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277602 Jy ! Component: 100 - total flux cleaned = 0.0033305 Jy ! Component: 150 - total flux cleaned = 0.00333426 Jy ! Component: 200 - total flux cleaned = 0.00343665 Jy ! Total flux subtracted in 200 components = 0.00343665 Jy ! Clean residual min=-0.002386 max=0.002829 Jy/beam ! Clean residual mean=0.000003 rms=0.000666 Jy/beam ! Combined flux in latest and established models = 0.163552 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 143 components and 0.163552 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105611Jy sigma=0.000819 ! Fit after self-cal, rms=0.105575Jy sigma=0.000819 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105575Jy sigma=0.000819 ! Fit after self-cal, rms=0.099802Jy sigma=0.000817 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.572 mas, bmaj=5.852 mas, bpa=-6.619 degrees ! Estimated noise=667.314 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00208489 Jy ! Component: 100 - total flux cleaned = 0.00322557 Jy ! Component: 150 - total flux cleaned = 0.00388074 Jy ! Component: 200 - total flux cleaned = 0.00433315 Jy ! Total flux subtracted in 200 components = 0.00433315 Jy ! Clean residual min=-0.002509 max=0.002921 Jy/beam ! Clean residual mean=0.000001 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.167885 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 165 components and 0.167885 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099649Jy sigma=0.000816 ! Fit after self-cal, rms=0.099541Jy sigma=0.000816 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000555909 Jy ! Component: 100 - total flux cleaned = 0.000833521 Jy ! Component: 150 - total flux cleaned = 0.00109703 Jy ! Component: 200 - total flux cleaned = 0.00130606 Jy ! Total flux subtracted in 200 components = 0.00130606 Jy ! Clean residual min=-0.002552 max=0.002896 Jy/beam ! Clean residual mean=0.000001 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.169191 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 172 components and 0.169191 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099474Jy sigma=0.000816 ! Fit after self-cal, rms=0.099460Jy sigma=0.000816 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099460Jy sigma=0.000816 ! Fit after self-cal, rms=0.098189Jy sigma=0.000816 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.624 mas, bmaj=9.071 mas, bpa=1.858 degrees ! Estimated noise=818.614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000608728 Jy ! Component: 100 - total flux cleaned = 0.00112535 Jy ! Component: 150 - total flux cleaned = 0.00142116 Jy ! Component: 200 - total flux cleaned = 0.0018225 Jy ! Total flux subtracted in 200 components = 0.0018225 Jy ! Clean residual min=-0.003592 max=0.003804 Jy/beam ! Clean residual mean=-0.000001 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.171014 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 185 components and 0.171014 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098136Jy sigma=0.000816 ! Fit after self-cal, rms=0.098102Jy sigma=0.000816 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000357289 Jy ! Component: 100 - total flux cleaned = 0.000674083 Jy ! Component: 150 - total flux cleaned = 0.00103365 Jy ! Component: 200 - total flux cleaned = 0.00120159 Jy ! Total flux subtracted in 200 components = 0.00120159 Jy ! Clean residual min=-0.003564 max=0.003810 Jy/beam ! Clean residual mean=-0.000002 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.172215 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 188 components and 0.172215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098080Jy sigma=0.000816 ! Fit after self-cal, rms=0.098076Jy sigma=0.000816 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.573 mas, bmaj=5.846 mas, bpa=-6.672 degrees ! Estimated noise=669.753 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.573 x 5.846 at -6.672 degrees (North through East) ! Clean map min=-0.0025085 max=0.12079 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.002 mas, bmaj=5.084 mas, bpa=-9.158 degrees ! Estimated noise=1076.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0925956 Jy ! Component: 100 - total flux cleaned = 0.11775 Jy ! Component: 150 - total flux cleaned = 0.129263 Jy ! Component: 200 - total flux cleaned = 0.137157 Jy ! Total flux subtracted in 200 components = 0.137157 Jy ! Clean residual min=-0.004342 max=0.005961 Jy/beam ! Clean residual mean=0.000015 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.137156 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 30 model components to the UV plane model. ! The established model now contains 30 components and 0.137156 Jy ! Inverting map and beam ! Estimated beam: bmin=3.573 mas, bmaj=5.846 mas, bpa=-6.672 degrees ! Estimated noise=669.753 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00676264 Jy ! Component: 100 - total flux cleaned = 0.0118872 Jy ! Component: 150 - total flux cleaned = 0.0159956 Jy ! Component: 200 - total flux cleaned = 0.0193935 Jy ! Total flux subtracted in 200 components = 0.0193935 Jy ! Clean residual min=-0.002760 max=0.003575 Jy/beam ! Clean residual mean=0.000000 rms=0.000792 Jy/beam ! Combined flux in latest and established models = 0.15655 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 51 components and 0.15655 Jy ! Inverting map ! Added new window around map position (56.5, -91). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00340783 Jy ! Component: 100 - total flux cleaned = 0.00538826 Jy ! Component: 150 - total flux cleaned = 0.00688015 Jy ! Component: 200 - total flux cleaned = 0.00806475 Jy ! Total flux subtracted in 200 components = 0.00806475 Jy ! Clean residual min=-0.002727 max=0.003071 Jy/beam ! Clean residual mean=0.000001 rms=0.000732 Jy/beam ! Combined flux in latest and established models = 0.164615 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 76 components and 0.164615 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.624 mas, bmaj=9.071 mas, bpa=1.858 degrees ! Estimated noise=818.614 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00124859 Jy ! Component: 100 - total flux cleaned = 0.00238172 Jy ! Component: 150 - total flux cleaned = 0.0031832 Jy ! Component: 200 - total flux cleaned = 0.00363531 Jy ! Total flux subtracted in 200 components = 0.00363531 Jy ! Clean residual min=-0.003375 max=0.003873 Jy/beam ! Clean residual mean=-0.000000 rms=0.000968 Jy/beam ! Combined flux in latest and established models = 0.16825 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000415066 Jy ! Component: 100 - total flux cleaned = 0.000800725 Jy ! Component: 150 - total flux cleaned = 0.00121313 Jy ! Component: 200 - total flux cleaned = 0.00155156 Jy ! Total flux subtracted in 200 components = 0.00155156 Jy ! Clean residual min=-0.003323 max=0.003852 Jy/beam ! Clean residual mean=-0.000002 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.169802 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 112 components and 0.169802 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.573 mas, bmaj=5.846 mas, bpa=-6.672 degrees ! Estimated noise=669.753 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000460081 Jy ! Component: 100 - total flux cleaned = 7.08295e-05 Jy ! Component: 150 - total flux cleaned = 0.000373006 Jy ! Component: 200 - total flux cleaned = 0.000822059 Jy ! Total flux subtracted in 200 components = 0.000822059 Jy ! Clean residual min=-0.002501 max=0.002912 Jy/beam ! Clean residual mean=-0.000000 rms=0.000692 Jy/beam ! Combined flux in latest and established models = 0.170624 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 135 components and 0.170624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098110Jy sigma=0.000816 ! Fit after self-cal, rms=0.098079Jy sigma=0.000816 wmodel J0010+4412_S_2017_03_23_pus_map.mod ! Writing 135 model components to file: J0010+4412_S_2017_03_23_pus_map.mod wobs J0010+4412_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0010+4412_S_2017_03_23_pus_uvs.fits wwins J0010+4412_S_2017_03_23_pus_map.win ! wwins: Wrote 6 windows to J0010+4412_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00134227 Jy ! Component: 100 - total flux cleaned = 0.00259455 Jy ! Component: 150 - total flux cleaned = 0.00355114 Jy ! Component: 200 - total flux cleaned = 0.00433316 Jy ! Component: 250 - total flux cleaned = 0.00499861 Jy ! Component: 300 - total flux cleaned = 0.00564214 Jy ! Component: 350 - total flux cleaned = 0.00618496 Jy ! Component: 400 - total flux cleaned = 0.00667288 Jy ! Component: 450 - total flux cleaned = 0.00703017 Jy ! Component: 500 - total flux cleaned = 0.00745674 Jy ! Component: 550 - total flux cleaned = 0.00783614 Jy ! Component: 600 - total flux cleaned = 0.0082078 Jy ! Component: 650 - total flux cleaned = 0.00853603 Jy ! Component: 700 - total flux cleaned = 0.00889413 Jy ! Component: 750 - total flux cleaned = 0.0092108 Jy ! Component: 800 - total flux cleaned = 0.00962531 Jy ! Component: 850 - total flux cleaned = 0.00993122 Jy ! Component: 900 - total flux cleaned = 0.0102997 Jy ! Component: 950 - total flux cleaned = 0.0105965 Jy ! Component: 1000 - total flux cleaned = 0.010955 Jy ! Component: 1050 - total flux cleaned = 0.0113088 Jy ! Component: 1100 - total flux cleaned = 0.0116267 Jy ! Component: 1150 - total flux cleaned = 0.0120029 Jy ! Component: 1200 - total flux cleaned = 0.0123741 Jy ! Component: 1250 - total flux cleaned = 0.0126186 Jy ! Component: 1300 - total flux cleaned = 0.0130112 Jy ! Component: 1350 - total flux cleaned = 0.013399 Jy ! Component: 1400 - total flux cleaned = 0.0137826 Jy ! Component: 1450 - total flux cleaned = 0.0141032 Jy ! Component: 1500 - total flux cleaned = 0.0144212 Jy ! Component: 1550 - total flux cleaned = 0.0147645 Jy ! Component: 1600 - total flux cleaned = 0.0150758 Jy ! Component: 1650 - total flux cleaned = 0.0154963 Jy ! Component: 1700 - total flux cleaned = 0.0158848 Jy ! Component: 1750 - total flux cleaned = 0.0161049 Jy ! Component: 1800 - total flux cleaned = 0.0163503 Jy ! Component: 1850 - total flux cleaned = 0.0166476 Jy ! Component: 1900 - total flux cleaned = 0.0168617 Jy ! Component: 1950 - total flux cleaned = 0.0170478 Jy ! Component: 2000 - total flux cleaned = 0.017206 Jy ! Component: 2050 - total flux cleaned = 0.0173895 Jy ! Component: 2100 - total flux cleaned = 0.0175978 Jy ! Component: 2150 - total flux cleaned = 0.0178821 Jy ! Component: 2200 - total flux cleaned = 0.0180099 Jy ! Component: 2250 - total flux cleaned = 0.0182897 Jy ! Component: 2300 - total flux cleaned = 0.0184662 Jy ! Component: 2350 - total flux cleaned = 0.0186165 Jy ! Component: 2400 - total flux cleaned = 0.0187161 Jy ! Component: 2450 - total flux cleaned = 0.0189387 Jy ! Component: 2500 - total flux cleaned = 0.0191597 Jy ! Component: 2550 - total flux cleaned = 0.0192814 Jy ! Component: 2600 - total flux cleaned = 0.0194989 Jy ! Component: 2650 - total flux cleaned = 0.019595 Jy ! Component: 2700 - total flux cleaned = 0.0197626 Jy ! Component: 2750 - total flux cleaned = 0.02 Jy ! Component: 2800 - total flux cleaned = 0.0201417 Jy ! Component: 2850 - total flux cleaned = 0.0202355 Jy ! Component: 2900 - total flux cleaned = 0.0204454 Jy ! Component: 2950 - total flux cleaned = 0.0206308 Jy ! Component: 3000 - total flux cleaned = 0.0207917 Jy ! Component: 3050 - total flux cleaned = 0.0209518 Jy ! Component: 3100 - total flux cleaned = 0.021111 Jy ! Component: 3150 - total flux cleaned = 0.0212469 Jy ! Component: 3200 - total flux cleaned = 0.0213592 Jy ! Component: 3250 - total flux cleaned = 0.021538 Jy ! Component: 3300 - total flux cleaned = 0.0215825 Jy ! Component: 3350 - total flux cleaned = 0.0217373 Jy ! Component: 3400 - total flux cleaned = 0.0218472 Jy ! Component: 3450 - total flux cleaned = 0.0219784 Jy ! Component: 3500 - total flux cleaned = 0.0220218 Jy ! Component: 3550 - total flux cleaned = 0.0221951 Jy ! Component: 3600 - total flux cleaned = 0.0223241 Jy ! Component: 3650 - total flux cleaned = 0.0223669 Jy ! Component: 3700 - total flux cleaned = 0.0224521 Jy ! Component: 3750 - total flux cleaned = 0.0226006 Jy ! Component: 3800 - total flux cleaned = 0.022685 Jy ! Component: 3850 - total flux cleaned = 0.0227898 Jy ! Component: 3900 - total flux cleaned = 0.0229152 Jy ! Component: 3950 - total flux cleaned = 0.0229568 Jy ! Component: 4000 - total flux cleaned = 0.0231016 Jy ! Component: 4050 - total flux cleaned = 0.0231426 Jy ! Total flux subtracted in 4096 components = 0.0232247 Jy ! Clean residual min=-0.001274 max=0.001634 Jy/beam ! Clean residual mean=-0.000002 rms=0.000388 Jy/beam ! Combined flux in latest and established models = 0.193848 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 452 components and 0.193848 Jy ![Exited script file: muppet] wmap "J0010+4412_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.573 x 5.846 at -6.672 degrees (North through East) ! Clean map min=-0.0018826 max=0.12175 Jy/beam ! Writing clean map to FITS file: J0010+4412_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.121752 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000381508 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.940048 0.940048 1.8801 3.76019 7.52038 15.0408 30.0815 60.163 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.121 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.573 x 5.846 at -6.672 degrees (North through East) ! Clean map min=-0.0018826 max=0.12175 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010+4412_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:44:08 2019