! Started logfile: J0010+2047_S_2017_05_27_pus_uvs.log on Fri May 3 10:52:27 2019 obs J0010+2047_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0010+2047_S_2017_05_27_pus_uva.fits ! AN table 1: 142 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.836307 visibilities/baseline/integration-bin. ! Found source: J0010+2047 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 21376 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010+2047_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 233 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 140 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 874 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.959387Jy sigma=0.013723 ! Fit after self-cal, rms=0.940689Jy sigma=0.013618 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.769 mas, bmaj=6.555 mas, bpa=-4.48 degrees ! Estimated noise=771.899 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0426797 Jy ! Component: 100 - total flux cleaned = 0.0523841 Jy ! Total flux subtracted in 100 components = 0.0523841 Jy ! Clean residual min=-0.004992 max=0.005433 Jy/beam ! Clean residual mean=-0.000009 rms=0.001198 Jy/beam ! Combined flux in latest and established models = 0.0523841 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0523841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087762Jy sigma=0.000826 ! Fit after self-cal, rms=0.087562Jy sigma=0.000824 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.212 mas, bmaj=7.167 mas, bpa=-3.025 degrees ! Estimated noise=544.685 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00579362 Jy ! Component: 100 - total flux cleaned = 0.00916774 Jy ! Component: 150 - total flux cleaned = 0.0112914 Jy ! Component: 200 - total flux cleaned = 0.0126897 Jy ! Total flux subtracted in 200 components = 0.0126897 Jy ! Clean residual min=-0.004210 max=0.004431 Jy/beam ! Clean residual mean=-0.000006 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.0650738 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 33 components and 0.0650738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086966Jy sigma=0.000831 ! Fit after self-cal, rms=0.086967Jy sigma=0.000831 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 0.92 HN 0.93 KP 1.05 ! LA 1.12 MK 1.03 NL 0.85 OV 1.02 ! PT 1.03 SC 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 0.92 HN 1.01 KP 0.90 ! LA 0.90 MK 0.99 NL 0.99 OV 0.97 ! PT 0.95 SC 0.90 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 6.09 FD 0.92 HN 1.26 KP 0.99 ! LA 0.97 MK 0.97 NL 0.95 OV 0.99 ! PT 0.98 SC 0.95 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.98 HN 0.90 KP 1.00* ! LA 0.95 MK 0.90 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.086967Jy sigma=0.000831 ! Fit after self-cal, rms=0.310665Jy sigma=0.000682 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.151 mas, bmaj=7.42 mas, bpa=-3.441 degrees ! Estimated noise=574.047 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00156611 Jy ! Component: 100 - total flux cleaned = 0.00137029 Jy ! Component: 150 - total flux cleaned = 0.00120492 Jy ! Component: 200 - total flux cleaned = 0.000994241 Jy ! Total flux subtracted in 200 components = 0.000994241 Jy ! Clean residual min=-0.002400 max=0.002384 Jy/beam ! Clean residual mean=0.000006 rms=0.000577 Jy/beam ! Combined flux in latest and established models = 0.0660681 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 42 components and 0.0660681 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310231Jy sigma=0.000682 ! Fit after self-cal, rms=0.310517Jy sigma=0.000678 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.310517Jy sigma=0.000678 ! Fit after self-cal, rms=0.472087Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.124 mas, bmaj=7.446 mas, bpa=-3.975 degrees ! Estimated noise=590.411 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173078 Jy ! Component: 100 - total flux cleaned = 0.00156706 Jy ! Component: 150 - total flux cleaned = 0.00150602 Jy ! Component: 200 - total flux cleaned = 0.00139582 Jy ! Total flux subtracted in 200 components = 0.00139582 Jy ! Clean residual min=-0.002747 max=0.002400 Jy/beam ! Clean residual mean=0.000001 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.0674639 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.0674639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.471737Jy sigma=0.000672 ! Fit after self-cal, rms=0.471821Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000228607 Jy ! Component: 100 - total flux cleaned = -0.000366609 Jy ! Component: 150 - total flux cleaned = -0.000447789 Jy ! Component: 200 - total flux cleaned = -0.000519547 Jy ! Total flux subtracted in 200 components = -0.000519547 Jy ! Clean residual min=-0.002607 max=0.002434 Jy/beam ! Clean residual mean=0.000001 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.0669443 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 51 components and 0.0669443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.471705Jy sigma=0.000671 ! Fit after self-cal, rms=0.471704Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.471704Jy sigma=0.000671 ! Fit after self-cal, rms=0.512663Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.127 mas, bmaj=7.389 mas, bpa=-4.442 degrees ! Estimated noise=594.627 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000882923 Jy ! Component: 100 - total flux cleaned = 0.00101833 Jy ! Component: 150 - total flux cleaned = 0.00107893 Jy ! Component: 200 - total flux cleaned = 0.0010786 Jy ! Total flux subtracted in 200 components = 0.0010786 Jy ! Clean residual min=-0.002162 max=0.001804 Jy/beam ! Clean residual mean=-0.000001 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0680229 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.0680229 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512604Jy sigma=0.000665 ! Fit after self-cal, rms=0.512601Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.79101e-06 Jy ! Component: 100 - total flux cleaned = -2.76783e-06 Jy ! Component: 150 - total flux cleaned = -2.48736e-05 Jy ! Component: 200 - total flux cleaned = -3.47181e-05 Jy ! Total flux subtracted in 200 components = -3.47181e-05 Jy ! Clean residual min=-0.002170 max=0.001827 Jy/beam ! Clean residual mean=-0.000001 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.0679882 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 59 components and 0.0679882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512581Jy sigma=0.000664 ! Fit after self-cal, rms=0.512582Jy sigma=0.000664 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.512582Jy sigma=0.000664 ! Fit after self-cal, rms=0.534194Jy sigma=0.000664 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.156 mas, bmaj=11.01 mas, bpa=-8.375 degrees ! Estimated noise=761.962 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000940773 Jy ! Component: 100 - total flux cleaned = 0.00100758 Jy ! Component: 150 - total flux cleaned = 0.00102482 Jy ! Component: 200 - total flux cleaned = 0.000998959 Jy ! Total flux subtracted in 200 components = 0.000998959 Jy ! Clean residual min=-0.002239 max=0.002016 Jy/beam ! Clean residual mean=-0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0689872 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 66 components and 0.0689872 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534163Jy sigma=0.000664 ! Fit after self-cal, rms=0.534164Jy sigma=0.000664 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.46849e-06 Jy ! Component: 100 - total flux cleaned = 8.04931e-06 Jy ! Component: 150 - total flux cleaned = 4.05121e-07 Jy ! Component: 200 - total flux cleaned = -1.56144e-05 Jy ! Total flux subtracted in 200 components = -1.56144e-05 Jy ! Clean residual min=-0.002247 max=0.002010 Jy/beam ! Clean residual mean=-0.000004 rms=0.000512 Jy/beam ! Combined flux in latest and established models = 0.0689716 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 74 components and 0.0689716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534159Jy sigma=0.000664 ! Fit after self-cal, rms=0.534157Jy sigma=0.000664 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=7.402 mas, bpa=-4.669 degrees ! Estimated noise=602.278 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.12 x 7.402 at -4.669 degrees (North through East) ! Clean map min=-0.0020923 max=0.063393 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.642 mas, bmaj=6.716 mas, bpa=-5.771 degrees ! Estimated noise=860.485 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.04785 Jy ! Component: 100 - total flux cleaned = 0.0601825 Jy ! Component: 150 - total flux cleaned = 0.0659553 Jy ! Component: 200 - total flux cleaned = 0.0683608 Jy ! Total flux subtracted in 200 components = 0.0683608 Jy ! Clean residual min=-0.002637 max=0.002409 Jy/beam ! Clean residual mean=0.000002 rms=0.000614 Jy/beam ! Combined flux in latest and established models = 0.0683609 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0683609 Jy ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=7.402 mas, bpa=-4.669 degrees ! Estimated noise=602.278 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000552194 Jy ! Component: 100 - total flux cleaned = 0.00080197 Jy ! Component: 150 - total flux cleaned = 0.000761658 Jy ! Component: 200 - total flux cleaned = 0.000761219 Jy ! Total flux subtracted in 200 components = 0.000761219 Jy ! Clean residual min=-0.002177 max=0.001838 Jy/beam ! Clean residual mean=-0.000002 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.0691221 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 26 components and 0.0691221 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.156 mas, bmaj=11.01 mas, bpa=-8.375 degrees ! Estimated noise=761.962 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000323007 Jy ! Component: 100 - total flux cleaned = 0.00019798 Jy ! Component: 150 - total flux cleaned = 7.69903e-05 Jy ! Component: 200 - total flux cleaned = 3.72783e-05 Jy ! Total flux subtracted in 200 components = 3.72783e-05 Jy ! Clean residual min=-0.002194 max=0.002024 Jy/beam ! Clean residual mean=-0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0691593 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.15371e-05 Jy ! Component: 100 - total flux cleaned = -8.08213e-05 Jy ! Component: 150 - total flux cleaned = -0.000106969 Jy ! Component: 200 - total flux cleaned = -0.000141128 Jy ! Total flux subtracted in 200 components = -0.000141128 Jy ! Clean residual min=-0.002206 max=0.002015 Jy/beam ! Clean residual mean=-0.000004 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0690182 Jy ! Adding 12 model components to the UV plane model. ! The established model now contains 33 components and 0.0690182 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.12 mas, bmaj=7.402 mas, bpa=-4.669 degrees ! Estimated noise=602.278 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000256565 Jy ! Component: 100 - total flux cleaned = -0.000282914 Jy ! Component: 150 - total flux cleaned = -0.000220444 Jy ! Component: 200 - total flux cleaned = -0.000150838 Jy ! Total flux subtracted in 200 components = -0.000150838 Jy ! Clean residual min=-0.002196 max=0.001885 Jy/beam ! Clean residual mean=-0.000002 rms=0.000441 Jy/beam ! Combined flux in latest and established models = 0.0688674 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 43 components and 0.0688674 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.534165Jy sigma=0.000664 ! Fit after self-cal, rms=0.534173Jy sigma=0.000664 wmodel J0010+2047_S_2017_05_27_pus_map.mod ! Writing 43 model components to file: J0010+2047_S_2017_05_27_pus_map.mod wobs J0010+2047_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0010+2047_S_2017_05_27_pus_uvs.fits wwins J0010+2047_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0010+2047_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000193744 Jy ! Component: 100 - total flux cleaned = 0.000176289 Jy ! Component: 150 - total flux cleaned = 0.000379028 Jy ! Component: 200 - total flux cleaned = 0.000350649 Jy ! Component: 250 - total flux cleaned = 0.000322928 Jy ! Component: 300 - total flux cleaned = 0.000295434 Jy ! Component: 350 - total flux cleaned = 0.000269056 Jy ! Component: 400 - total flux cleaned = 0.000242695 Jy ! Component: 450 - total flux cleaned = 0.000167303 Jy ! Component: 500 - total flux cleaned = 0.000216021 Jy ! Component: 550 - total flux cleaned = 0.00019164 Jy ! Component: 600 - total flux cleaned = 0.000215055 Jy ! Component: 650 - total flux cleaned = 0.000191872 Jy ! Component: 700 - total flux cleaned = 0.000191551 Jy ! Component: 750 - total flux cleaned = 0.00010093 Jy ! Component: 800 - total flux cleaned = 0.00012328 Jy ! Component: 850 - total flux cleaned = 7.90914e-05 Jy ! Component: 900 - total flux cleaned = 1.36865e-05 Jy ! Component: 950 - total flux cleaned = -2.91602e-05 Jy ! Component: 1000 - total flux cleaned = -7.81999e-06 Jy ! Component: 1050 - total flux cleaned = -7.07549e-05 Jy ! Component: 1100 - total flux cleaned = -0.000112465 Jy ! Component: 1150 - total flux cleaned = -0.000112497 Jy ! Component: 1200 - total flux cleaned = -0.000173773 Jy ! Component: 1250 - total flux cleaned = -0.000214301 Jy ! Component: 1300 - total flux cleaned = -0.000314297 Jy ! Component: 1350 - total flux cleaned = -0.00035341 Jy ! Component: 1400 - total flux cleaned = -0.000353305 Jy ! Component: 1450 - total flux cleaned = -0.000411262 Jy ! Component: 1500 - total flux cleaned = -0.000507299 Jy ! Component: 1550 - total flux cleaned = -0.000488387 Jy ! Component: 1600 - total flux cleaned = -0.00052606 Jy ! Component: 1650 - total flux cleaned = -0.000545124 Jy ! Component: 1700 - total flux cleaned = -0.00061949 Jy ! Component: 1750 - total flux cleaned = -0.000656329 Jy ! Component: 1800 - total flux cleaned = -0.000711383 Jy ! Component: 1850 - total flux cleaned = -0.000711462 Jy ! Component: 1900 - total flux cleaned = -0.00078382 Jy ! Component: 1950 - total flux cleaned = -0.00083755 Jy ! Component: 2000 - total flux cleaned = -0.00087293 Jy ! Component: 2050 - total flux cleaned = -0.000925809 Jy ! Component: 2100 - total flux cleaned = -0.0009259 Jy ! Component: 2150 - total flux cleaned = -0.000995408 Jy ! Component: 2200 - total flux cleaned = -0.00104723 Jy ! Component: 2250 - total flux cleaned = -0.00111595 Jy ! Component: 2300 - total flux cleaned = -0.0011842 Jy ! Component: 2350 - total flux cleaned = -0.00125172 Jy ! Component: 2400 - total flux cleaned = -0.00128544 Jy ! Component: 2450 - total flux cleaned = -0.0013523 Jy ! Component: 2500 - total flux cleaned = -0.00138553 Jy ! Component: 2550 - total flux cleaned = -0.00148456 Jy ! Component: 2600 - total flux cleaned = -0.00153371 Jy ! Component: 2650 - total flux cleaned = -0.00163166 Jy ! Component: 2700 - total flux cleaned = -0.00171261 Jy ! Component: 2750 - total flux cleaned = -0.00180933 Jy ! Component: 2800 - total flux cleaned = -0.00182536 Jy ! Component: 2850 - total flux cleaned = -0.00188926 Jy ! Component: 2900 - total flux cleaned = -0.00198435 Jy ! Component: 2950 - total flux cleaned = -0.00206328 Jy ! Component: 3000 - total flux cleaned = -0.00211031 Jy ! Component: 3050 - total flux cleaned = -0.00220388 Jy ! Component: 3100 - total flux cleaned = -0.00220375 Jy ! Component: 3150 - total flux cleaned = -0.00226544 Jy ! Component: 3200 - total flux cleaned = -0.00231139 Jy ! Component: 3250 - total flux cleaned = -0.00234198 Jy ! Component: 3300 - total flux cleaned = -0.00240281 Jy ! Component: 3350 - total flux cleaned = -0.00244819 Jy ! Component: 3400 - total flux cleaned = -0.00246329 Jy ! Component: 3450 - total flux cleaned = -0.00250819 Jy ! Component: 3500 - total flux cleaned = -0.00255283 Jy ! Component: 3550 - total flux cleaned = -0.00262696 Jy ! Component: 3600 - total flux cleaned = -0.00265646 Jy ! Component: 3650 - total flux cleaned = -0.00268578 Jy ! Component: 3700 - total flux cleaned = -0.00272963 Jy ! Component: 3750 - total flux cleaned = -0.00278775 Jy ! Component: 3800 - total flux cleaned = -0.00284565 Jy ! Component: 3850 - total flux cleaned = -0.00284564 Jy ! Component: 3900 - total flux cleaned = -0.00291735 Jy ! Component: 3950 - total flux cleaned = -0.00293167 Jy ! Component: 4000 - total flux cleaned = -0.00297422 Jy ! Component: 4050 - total flux cleaned = -0.00297425 Jy ! Total flux subtracted in 4096 components = -0.00305871 Jy ! Clean residual min=-0.000869 max=0.000893 Jy/beam ! Clean residual mean=-0.000001 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.0658087 Jy keep ! Adding 305 model components to the UV plane model. ! The established model now contains 348 components and 0.0658087 Jy ![Exited script file: muppet] wmap "J0010+2047_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.12 x 7.402 at -4.669 degrees (North through East) ! Clean map min=-0.0018736 max=0.063622 Jy/beam ! Writing clean map to FITS file: J0010+2047_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0636215 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000266547 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.25687 1.25687 2.51374 5.02748 10.055 20.1099 40.2198 80.4397 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.12 x 7.402 at -4.669 degrees (North through East) ! Clean map min=-0.0018736 max=0.063622 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010+2047_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:52:32 2019