! Started logfile: J0010+1058_S_2017_10_21_pus_uvs.log on Sat May 11 20:47:08 2019 obs J0010+1058_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0010+1058_S_2017_10_21_pus_uva.fits ! AN table 1: 30 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.694444 visibilities/baseline/integration-bin. ! Found source: J0010+1058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 3000 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010+1058_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 59 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 47 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 178 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.005582Jy sigma=0.009964 ! Fit after self-cal, rms=0.946212Jy sigma=0.009396 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.413 mas, bmaj=13.96 mas, bpa=-13.86 degrees ! Estimated noise=1848.22 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0434494 Jy ! Component: 100 - total flux cleaned = 0.0537891 Jy ! Total flux subtracted in 100 components = 0.0537891 Jy ! Clean residual min=-0.005829 max=0.005488 Jy/beam ! Clean residual mean=0.000004 rms=0.001508 Jy/beam ! Combined flux in latest and established models = 0.0537891 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0537891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080433Jy sigma=0.000714 ! Fit after self-cal, rms=0.078743Jy sigma=0.000701 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.179 mas, bmaj=14.29 mas, bpa=-13.79 degrees ! Estimated noise=1529.39 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00599589 Jy ! Component: 100 - total flux cleaned = 0.0088742 Jy ! Component: 150 - total flux cleaned = 0.0102821 Jy ! Component: 200 - total flux cleaned = 0.0108414 Jy ! Total flux subtracted in 200 components = 0.0108414 Jy ! Clean residual min=-0.004721 max=0.004088 Jy/beam ! Clean residual mean=0.000008 rms=0.001227 Jy/beam ! Combined flux in latest and established models = 0.0646305 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 41 components and 0.0646306 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078210Jy sigma=0.000697 ! Fit after self-cal, rms=0.078240Jy sigma=0.000697 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.89 HN 1.11 KP 1.17 ! LA 1.01 MK 0.96 NL 0.82 OV 1.12 ! PT 0.95 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.15 HN 1.07 KP 1.12 ! LA 1.08 MK 1.04 NL 0.95 OV 0.98 ! PT 0.85 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.06 KP 1.14 ! LA 0.76 MK 1.20 NL 1.19 OV 0.98 ! PT 0.75 ! ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.06 HN 0.47 KP 1.00* ! LA 1.76 MK 1.25 NL 1.00* OV 1.00* ! PT 0.62 ! ! ! Fit before self-cal, rms=0.078240Jy sigma=0.000697 ! Fit after self-cal, rms=0.076677Jy sigma=0.000686 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.188 mas, bmaj=14.44 mas, bpa=-13.67 degrees ! Estimated noise=1549.81 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000745531 Jy ! Component: 100 - total flux cleaned = -0.000907341 Jy ! Component: 150 - total flux cleaned = -0.00105264 Jy ! Component: 200 - total flux cleaned = -0.00115031 Jy ! Total flux subtracted in 200 components = -0.00115031 Jy ! Clean residual min=-0.003577 max=0.003728 Jy/beam ! Clean residual mean=0.000007 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.0634802 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 58 components and 0.0634802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076612Jy sigma=0.000686 ! Fit after self-cal, rms=0.076838Jy sigma=0.000684 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076838Jy sigma=0.000684 ! Fit after self-cal, rms=0.080756Jy sigma=0.000680 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.257 mas, bmaj=14.32 mas, bpa=-13.48 degrees ! Estimated noise=1565.95 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000383801 Jy ! Component: 100 - total flux cleaned = -0.000560527 Jy ! Component: 150 - total flux cleaned = -0.000562259 Jy ! Component: 200 - total flux cleaned = -0.000589472 Jy ! Total flux subtracted in 200 components = -0.000589472 Jy ! Clean residual min=-0.003377 max=0.003763 Jy/beam ! Clean residual mean=0.000004 rms=0.000930 Jy/beam ! Combined flux in latest and established models = 0.0628908 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 66 components and 0.0628907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080708Jy sigma=0.000679 ! Fit after self-cal, rms=0.080930Jy sigma=0.000679 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000299892 Jy ! Component: 100 - total flux cleaned = -0.000300965 Jy ! Component: 150 - total flux cleaned = -0.000324256 Jy ! Component: 200 - total flux cleaned = -0.000324459 Jy ! Total flux subtracted in 200 components = -0.000324459 Jy ! Clean residual min=-0.003399 max=0.003658 Jy/beam ! Clean residual mean=0.000005 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.0625663 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 73 components and 0.0625663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080907Jy sigma=0.000679 ! Fit after self-cal, rms=0.080903Jy sigma=0.000679 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080903Jy sigma=0.000679 ! Fit after self-cal, rms=0.082867Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.305 mas, bmaj=14.34 mas, bpa=-13.43 degrees ! Estimated noise=1562.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000874616 Jy ! Component: 100 - total flux cleaned = -0.00113938 Jy ! Component: 150 - total flux cleaned = -0.00124175 Jy ! Component: 200 - total flux cleaned = -0.00133483 Jy ! Total flux subtracted in 200 components = -0.00133483 Jy ! Clean residual min=-0.003286 max=0.003453 Jy/beam ! Clean residual mean=0.000003 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.0612314 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 81 components and 0.0612315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082828Jy sigma=0.000677 ! Fit after self-cal, rms=0.082935Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000216561 Jy ! Component: 100 - total flux cleaned = -0.000237069 Jy ! Component: 150 - total flux cleaned = -0.000274719 Jy ! Component: 200 - total flux cleaned = -0.000293503 Jy ! Total flux subtracted in 200 components = -0.000293503 Jy ! Clean residual min=-0.003240 max=0.003398 Jy/beam ! Clean residual mean=0.000003 rms=0.000895 Jy/beam ! Combined flux in latest and established models = 0.0609379 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 85 components and 0.0609379 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082917Jy sigma=0.000677 ! Fit after self-cal, rms=0.082910Jy sigma=0.000677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082910Jy sigma=0.000677 ! Fit after self-cal, rms=0.083339Jy sigma=0.000677 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.875 mas, bmaj=14.55 mas, bpa=-11.03 degrees ! Estimated noise=1698.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000530805 Jy ! Component: 100 - total flux cleaned = -0.000708903 Jy ! Component: 150 - total flux cleaned = -0.000792113 Jy ! Component: 200 - total flux cleaned = -0.000845333 Jy ! Total flux subtracted in 200 components = -0.000845333 Jy ! Clean residual min=-0.003187 max=0.003147 Jy/beam ! Clean residual mean=0.000004 rms=0.000946 Jy/beam ! Combined flux in latest and established models = 0.0600926 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 98 components and 0.0600926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083319Jy sigma=0.000677 ! Fit after self-cal, rms=0.083354Jy sigma=0.000677 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.14216e-05 Jy ! Component: 100 - total flux cleaned = -0.000111162 Jy ! Component: 150 - total flux cleaned = -0.000151143 Jy ! Component: 200 - total flux cleaned = -0.000164072 Jy ! Total flux subtracted in 200 components = -0.000164072 Jy ! Clean residual min=-0.003182 max=0.003150 Jy/beam ! Clean residual mean=0.000004 rms=0.000947 Jy/beam ! Combined flux in latest and established models = 0.0599285 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 104 components and 0.0599285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083348Jy sigma=0.000677 ! Fit after self-cal, rms=0.083345Jy sigma=0.000677 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.341 mas, bmaj=14.36 mas, bpa=-13.43 degrees ! Estimated noise=1558.76 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.341 x 14.36 at -13.43 degrees (North through East) ! Clean map min=-0.0032019 max=0.05917 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.541 mas, bmaj=13.87 mas, bpa=-13.47 degrees ! Estimated noise=1931.02 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0467629 Jy ! Component: 100 - total flux cleaned = 0.0567119 Jy ! Component: 150 - total flux cleaned = 0.0591772 Jy ! Component: 200 - total flux cleaned = 0.0606329 Jy ! Total flux subtracted in 200 components = 0.0606329 Jy ! Clean residual min=-0.005522 max=0.004907 Jy/beam ! Clean residual mean=0.000001 rms=0.001224 Jy/beam ! Combined flux in latest and established models = 0.0606329 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.0606329 Jy ! Inverting map and beam ! Estimated beam: bmin=4.341 mas, bmaj=14.36 mas, bpa=-13.43 degrees ! Estimated noise=1558.76 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.05958e-05 Jy ! Component: 100 - total flux cleaned = 9.35861e-05 Jy ! Component: 150 - total flux cleaned = 9.40191e-05 Jy ! Component: 200 - total flux cleaned = 9.45424e-05 Jy ! Total flux subtracted in 200 components = 9.45424e-05 Jy ! Clean residual min=-0.003257 max=0.003595 Jy/beam ! Clean residual mean=0.000002 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.0607275 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 33 components and 0.0607275 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.875 mas, bmaj=14.55 mas, bpa=-11.03 degrees ! Estimated noise=1698.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000235998 Jy ! Component: 100 - total flux cleaned = 0.00016983 Jy ! Component: 150 - total flux cleaned = 0.000113603 Jy ! Component: 200 - total flux cleaned = 3.60835e-05 Jy ! Total flux subtracted in 200 components = 3.60835e-05 Jy ! Clean residual min=-0.003191 max=0.003205 Jy/beam ! Clean residual mean=0.000003 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.0607635 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.69215e-05 Jy ! Component: 100 - total flux cleaned = -0.000111079 Jy ! Component: 150 - total flux cleaned = -0.00015013 Jy ! Component: 200 - total flux cleaned = -0.000186547 Jy ! Total flux subtracted in 200 components = -0.000186547 Jy ! Clean residual min=-0.003180 max=0.003171 Jy/beam ! Clean residual mean=0.000003 rms=0.000951 Jy/beam ! Combined flux in latest and established models = 0.060577 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 46 components and 0.060577 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.341 mas, bmaj=14.36 mas, bpa=-13.43 degrees ! Estimated noise=1558.76 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.30646e-06 Jy ! Component: 100 - total flux cleaned = -6.82077e-05 Jy ! Component: 150 - total flux cleaned = -0.000185321 Jy ! Component: 200 - total flux cleaned = -0.000266341 Jy ! Total flux subtracted in 200 components = -0.000266341 Jy ! Clean residual min=-0.003210 max=0.003411 Jy/beam ! Clean residual mean=0.000002 rms=0.000892 Jy/beam ! Combined flux in latest and established models = 0.0603107 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 55 components and 0.0603107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083369Jy sigma=0.000677 ! Fit after self-cal, rms=0.083370Jy sigma=0.000677 wmodel J0010+1058_S_2017_10_21_pus_map.mod ! Writing 55 model components to file: J0010+1058_S_2017_10_21_pus_map.mod wobs J0010+1058_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0010+1058_S_2017_10_21_pus_uvs.fits wwins J0010+1058_S_2017_10_21_pus_map.win ! wwins: Wrote 1 windows to J0010+1058_S_2017_10_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000639369 Jy ! Component: 100 - total flux cleaned = 0.000806963 Jy ! Component: 150 - total flux cleaned = 0.000808124 Jy ! Component: 200 - total flux cleaned = 0.00080715 Jy ! Component: 250 - total flux cleaned = 0.000660964 Jy ! Component: 300 - total flux cleaned = 0.000520472 Jy ! Component: 350 - total flux cleaned = 0.000294103 Jy ! Component: 400 - total flux cleaned = 0.000250731 Jy ! Component: 450 - total flux cleaned = 0.000122161 Jy ! Component: 500 - total flux cleaned = 0.000165648 Jy ! Component: 550 - total flux cleaned = 0.000207275 Jy ! Component: 600 - total flux cleaned = 0.000206792 Jy ! Component: 650 - total flux cleaned = 4.95753e-05 Jy ! Component: 700 - total flux cleaned = -2.69916e-05 Jy ! Component: 750 - total flux cleaned = -0.000177914 Jy ! Component: 800 - total flux cleaned = -0.000178008 Jy ! Component: 850 - total flux cleaned = -0.000325077 Jy ! Component: 900 - total flux cleaned = -0.000360404 Jy ! Component: 950 - total flux cleaned = -0.000430725 Jy ! Component: 1000 - total flux cleaned = -0.00043027 Jy ! Component: 1050 - total flux cleaned = -0.000532671 Jy ! Component: 1100 - total flux cleaned = -0.000531934 Jy ! Component: 1150 - total flux cleaned = -0.000598108 Jy ! Component: 1200 - total flux cleaned = -0.000597199 Jy ! Component: 1250 - total flux cleaned = -0.000467161 Jy ! Component: 1300 - total flux cleaned = -0.000563223 Jy ! Component: 1350 - total flux cleaned = -0.000468714 Jy ! Component: 1400 - total flux cleaned = -0.000531416 Jy ! Component: 1450 - total flux cleaned = -0.00050056 Jy ! Component: 1500 - total flux cleaned = -0.000530956 Jy ! Component: 1550 - total flux cleaned = -0.000501046 Jy ! Component: 1600 - total flux cleaned = -0.000589435 Jy ! Component: 1650 - total flux cleaned = -0.000501854 Jy ! Component: 1700 - total flux cleaned = -0.0003867 Jy ! Component: 1750 - total flux cleaned = -0.00035843 Jy ! Component: 1800 - total flux cleaned = -0.00030214 Jy ! Component: 1850 - total flux cleaned = -0.000274263 Jy ! Component: 1900 - total flux cleaned = -0.000246212 Jy ! Component: 1950 - total flux cleaned = -0.000110425 Jy ! Component: 2000 - total flux cleaned = -8.3473e-05 Jy ! Component: 2050 - total flux cleaned = -5.69846e-05 Jy ! Component: 2100 - total flux cleaned = -4.16791e-06 Jy ! Component: 2150 - total flux cleaned = -3.67962e-06 Jy ! Component: 2200 - total flux cleaned = 9.85634e-05 Jy ! Component: 2250 - total flux cleaned = 7.32565e-05 Jy ! Component: 2300 - total flux cleaned = 0.000224103 Jy ! Component: 2350 - total flux cleaned = 0.000248544 Jy ! Component: 2400 - total flux cleaned = 0.000223798 Jy ! Component: 2450 - total flux cleaned = 0.000369486 Jy ! Component: 2500 - total flux cleaned = 0.000489435 Jy ! Component: 2550 - total flux cleaned = 0.000465551 Jy ! Component: 2600 - total flux cleaned = 0.000559757 Jy ! Component: 2650 - total flux cleaned = 0.000676333 Jy ! Component: 2700 - total flux cleaned = 0.000722789 Jy ! Component: 2750 - total flux cleaned = 0.000791413 Jy ! Component: 2800 - total flux cleaned = 0.000859453 Jy ! Component: 2850 - total flux cleaned = 0.00092709 Jy ! Component: 2900 - total flux cleaned = 0.0010166 Jy ! Component: 2950 - total flux cleaned = 0.00119336 Jy ! Component: 3000 - total flux cleaned = 0.00134677 Jy ! Component: 3050 - total flux cleaned = 0.00147712 Jy ! Component: 3100 - total flux cleaned = 0.00154184 Jy ! Component: 3150 - total flux cleaned = 0.00162732 Jy ! Component: 3200 - total flux cleaned = 0.00169109 Jy ! Component: 3250 - total flux cleaned = 0.00192247 Jy ! Component: 3300 - total flux cleaned = 0.00198506 Jy ! Component: 3350 - total flux cleaned = 0.00213004 Jy ! Component: 3400 - total flux cleaned = 0.00223283 Jy ! Component: 3450 - total flux cleaned = 0.00237578 Jy ! Component: 3500 - total flux cleaned = 0.00245682 Jy ! Component: 3550 - total flux cleaned = 0.0025572 Jy ! Component: 3600 - total flux cleaned = 0.00263703 Jy ! Component: 3650 - total flux cleaned = 0.00277578 Jy ! Component: 3700 - total flux cleaned = 0.00275628 Jy ! Component: 3750 - total flux cleaned = 0.00285404 Jy ! Component: 3800 - total flux cleaned = 0.00293163 Jy ! Component: 3850 - total flux cleaned = 0.00300864 Jy ! Component: 3900 - total flux cleaned = 0.00308539 Jy ! Component: 3950 - total flux cleaned = 0.00314263 Jy ! Component: 4000 - total flux cleaned = 0.00321823 Jy ! Component: 4050 - total flux cleaned = 0.00325572 Jy ! Total flux subtracted in 4096 components = 0.00333031 Jy ! Clean residual min=-0.001023 max=0.001066 Jy/beam ! Clean residual mean=0.000002 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.063641 Jy keep ! Adding 309 model components to the UV plane model. ! The established model now contains 364 components and 0.063641 Jy ![Exited script file: muppet] wmap "J0010+1058_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.341 x 14.36 at -13.43 degrees (North through East) ! Clean map min=-0.0021697 max=0.059457 Jy/beam ! Writing clean map to FITS file: J0010+1058_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0594573 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00037269 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.88046 1.88046 3.76092 7.52184 15.0437 30.0873 60.1747 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.059 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.341 x 14.36 at -13.43 degrees (North through East) ! Clean map min=-0.0021697 max=0.059457 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010+1058_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:47:12 2019