! Started logfile: J0010+1058_S_2017_06_10_pus_uvs.log on Mon May 6 14:39:10 2019 obs J0010+1058_S_2017_06_10_pus_uva.fits ! Reading UV FITS file: J0010+1058_S_2017_06_10_pus_uva.fits ! AN table 1: 25 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.809778 visibilities/baseline/integration-bin. ! Found source: J0010+1058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1154 lines of history. ! ! Reading 3644 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010+1058_S_2017_06_10_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 26 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 154 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.997089Jy sigma=0.009794 ! Fit after self-cal, rms=0.945834Jy sigma=0.009310 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.928 mas, bmaj=7.196 mas, bpa=-2.48 degrees ! Estimated noise=1679.97 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0436701 Jy ! Component: 100 - total flux cleaned = 0.0533633 Jy ! Total flux subtracted in 100 components = 0.0533633 Jy ! Clean residual min=-0.004534 max=0.004098 Jy/beam ! Clean residual mean=-0.000013 rms=0.001145 Jy/beam ! Combined flux in latest and established models = 0.0533633 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0533633 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074651Jy sigma=0.000682 ! Fit after self-cal, rms=0.073937Jy sigma=0.000674 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.683 mas, bmaj=8.272 mas, bpa=1.746 degrees ! Estimated noise=1369.94 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0038935 Jy ! Component: 100 - total flux cleaned = 0.00542409 Jy ! Component: 150 - total flux cleaned = 0.00553449 Jy ! Component: 200 - total flux cleaned = 0.00548166 Jy ! Total flux subtracted in 200 components = 0.00548166 Jy ! Clean residual min=-0.004153 max=0.003827 Jy/beam ! Clean residual mean=-0.000032 rms=0.000952 Jy/beam ! Combined flux in latest and established models = 0.0588449 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 21 components and 0.0588449 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073709Jy sigma=0.000673 ! Fit after self-cal, rms=0.073717Jy sigma=0.000673 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.96 HN 0.96 KP 1.09 ! LA 0.94 MK 1.10 NL 0.84 OV 1.06 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 FD 1.01 HN 1.06 KP 0.95 ! LA 1.02 MK 0.95 NL 1.02 OV 1.09 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.11 HN 1.10 KP 0.98 ! LA 0.98 MK 1.00 NL 0.95 OV 1.00 ! PT 1.06 SC 0.99 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.89 KP 1.00* ! LA 0.90 MK 0.89 NL 1.00* OV 1.00* ! PT 0.92 SC 1.00* ! ! ! Fit before self-cal, rms=0.073717Jy sigma=0.000673 ! Fit after self-cal, rms=0.073658Jy sigma=0.000670 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.675 mas, bmaj=8.268 mas, bpa=1.448 degrees ! Estimated noise=1375.14 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000214117 Jy ! Component: 100 - total flux cleaned = -0.000183766 Jy ! Component: 150 - total flux cleaned = -0.000206064 Jy ! Component: 200 - total flux cleaned = -0.000187959 Jy ! Total flux subtracted in 200 components = -0.000187959 Jy ! Clean residual min=-0.004013 max=0.003714 Jy/beam ! Clean residual mean=-0.000031 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.058657 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.058657 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073633Jy sigma=0.000670 ! Fit after self-cal, rms=0.073653Jy sigma=0.000670 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073653Jy sigma=0.000670 ! Fit after self-cal, rms=0.074732Jy sigma=0.000666 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.688 mas, bmaj=8.304 mas, bpa=1.239 degrees ! Estimated noise=1378.42 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.17032e-06 Jy ! Component: 100 - total flux cleaned = 6.49067e-05 Jy ! Component: 150 - total flux cleaned = 8.10101e-05 Jy ! Component: 200 - total flux cleaned = 9.62823e-05 Jy ! Total flux subtracted in 200 components = 9.62823e-05 Jy ! Clean residual min=-0.003814 max=0.003492 Jy/beam ! Clean residual mean=-0.000020 rms=0.000918 Jy/beam ! Combined flux in latest and established models = 0.0587533 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 35 components and 0.0587533 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074722Jy sigma=0.000666 ! Fit after self-cal, rms=0.074817Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.44459e-05 Jy ! Component: 100 - total flux cleaned = 2.99829e-05 Jy ! Component: 150 - total flux cleaned = 5.94796e-05 Jy ! Component: 200 - total flux cleaned = 8.68639e-05 Jy ! Total flux subtracted in 200 components = 8.68639e-05 Jy ! Clean residual min=-0.003825 max=0.003531 Jy/beam ! Clean residual mean=-0.000020 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.0588401 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 39 components and 0.0588401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074811Jy sigma=0.000665 ! Fit after self-cal, rms=0.074808Jy sigma=0.000665 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074808Jy sigma=0.000665 ! Fit after self-cal, rms=0.075698Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.692 mas, bmaj=8.319 mas, bpa=1.109 degrees ! Estimated noise=1378.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.57968e-05 Jy ! Component: 100 - total flux cleaned = -3.56311e-05 Jy ! Component: 150 - total flux cleaned = -2.19474e-05 Jy ! Component: 200 - total flux cleaned = 3.39718e-06 Jy ! Total flux subtracted in 200 components = 3.39718e-06 Jy ! Clean residual min=-0.003833 max=0.003509 Jy/beam ! Clean residual mean=-0.000018 rms=0.000914 Jy/beam ! Combined flux in latest and established models = 0.0588435 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.0588435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075691Jy sigma=0.000665 ! Fit after self-cal, rms=0.075719Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.76481e-05 Jy ! Component: 100 - total flux cleaned = 7.37888e-06 Jy ! Component: 150 - total flux cleaned = 1.91036e-05 Jy ! Component: 200 - total flux cleaned = 3.10646e-05 Jy ! Total flux subtracted in 200 components = 3.10646e-05 Jy ! Clean residual min=-0.003835 max=0.003503 Jy/beam ! Clean residual mean=-0.000018 rms=0.000913 Jy/beam ! Combined flux in latest and established models = 0.0588746 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 42 components and 0.0588746 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075715Jy sigma=0.000665 ! Fit after self-cal, rms=0.075713Jy sigma=0.000665 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075713Jy sigma=0.000665 ! Fit after self-cal, rms=0.075852Jy sigma=0.000665 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.963 mas, bmaj=11.54 mas, bpa=-0.34 degrees ! Estimated noise=1630.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.75187e-05 Jy ! Component: 100 - total flux cleaned = -7.15293e-05 Jy ! Component: 150 - total flux cleaned = -7.16917e-05 Jy ! Component: 200 - total flux cleaned = -8.22783e-05 Jy ! Total flux subtracted in 200 components = -8.22783e-05 Jy ! Clean residual min=-0.005129 max=0.003748 Jy/beam ! Clean residual mean=-0.000035 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 0.0587923 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 44 components and 0.0587923 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075851Jy sigma=0.000665 ! Fit after self-cal, rms=0.075856Jy sigma=0.000665 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.88474e-06 Jy ! Component: 100 - total flux cleaned = -4.38764e-06 Jy ! Component: 150 - total flux cleaned = -1.43661e-05 Jy ! Component: 200 - total flux cleaned = -1.46327e-05 Jy ! Total flux subtracted in 200 components = -1.46327e-05 Jy ! Clean residual min=-0.005094 max=0.003748 Jy/beam ! Clean residual mean=-0.000035 rms=0.001158 Jy/beam ! Combined flux in latest and established models = 0.0587777 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 44 components and 0.0587777 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075855Jy sigma=0.000665 ! Fit after self-cal, rms=0.075854Jy sigma=0.000665 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=8.329 mas, bpa=1.004 degrees ! Estimated noise=1377.66 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.694 x 8.329 at 1.004 degrees (North through East) ! Clean map min=-0.003697 max=0.057203 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.945 mas, bmaj=7.298 mas, bpa=-3.003 degrees ! Estimated noise=1672.1 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440604 Jy ! Component: 100 - total flux cleaned = 0.0539262 Jy ! Component: 150 - total flux cleaned = 0.0570174 Jy ! Component: 200 - total flux cleaned = 0.0578674 Jy ! Total flux subtracted in 200 components = 0.0578674 Jy ! Clean residual min=-0.004588 max=0.004216 Jy/beam ! Clean residual mean=-0.000006 rms=0.001048 Jy/beam ! Combined flux in latest and established models = 0.0578674 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0578674 Jy ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=8.329 mas, bpa=1.004 degrees ! Estimated noise=1377.66 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000548483 Jy ! Component: 100 - total flux cleaned = 0.000550377 Jy ! Component: 150 - total flux cleaned = 0.000588783 Jy ! Component: 200 - total flux cleaned = 0.000651829 Jy ! Total flux subtracted in 200 components = 0.000651829 Jy ! Clean residual min=-0.003896 max=0.003449 Jy/beam ! Clean residual mean=-0.000019 rms=0.000915 Jy/beam ! Combined flux in latest and established models = 0.0585192 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.0585192 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.963 mas, bmaj=11.54 mas, bpa=-0.34 degrees ! Estimated noise=1630.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00021604 Jy ! Component: 100 - total flux cleaned = 0.000273205 Jy ! Component: 150 - total flux cleaned = 0.000258204 Jy ! Component: 200 - total flux cleaned = 0.000258156 Jy ! Total flux subtracted in 200 components = 0.000258156 Jy ! Clean residual min=-0.005081 max=0.003760 Jy/beam ! Clean residual mean=-0.000035 rms=0.001157 Jy/beam ! Combined flux in latest and established models = 0.0587774 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.16693e-05 Jy ! Component: 100 - total flux cleaned = -2.28899e-05 Jy ! Component: 150 - total flux cleaned = -3.29301e-05 Jy ! Component: 200 - total flux cleaned = -4.25282e-05 Jy ! Total flux subtracted in 200 components = -4.25282e-05 Jy ! Clean residual min=-0.005065 max=0.003764 Jy/beam ! Clean residual mean=-0.000035 rms=0.001156 Jy/beam ! Combined flux in latest and established models = 0.0587349 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.0587349 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.694 mas, bmaj=8.329 mas, bpa=1.004 degrees ! Estimated noise=1377.66 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000140089 Jy ! Component: 100 - total flux cleaned = -0.000188663 Jy ! Component: 150 - total flux cleaned = -0.000228481 Jy ! Component: 200 - total flux cleaned = -0.000228302 Jy ! Total flux subtracted in 200 components = -0.000228302 Jy ! Clean residual min=-0.003826 max=0.003489 Jy/beam ! Clean residual mean=-0.000019 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.0585066 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.0585066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075861Jy sigma=0.000665 ! Fit after self-cal, rms=0.075858Jy sigma=0.000665 wmodel J0010+1058_S_2017_06_10_pus_map.mod ! Writing 44 model components to file: J0010+1058_S_2017_06_10_pus_map.mod wobs J0010+1058_S_2017_06_10_pus_uvs.fits ! Writing UV FITS file: J0010+1058_S_2017_06_10_pus_uvs.fits wwins J0010+1058_S_2017_06_10_pus_map.win ! wwins: Wrote 1 windows to J0010+1058_S_2017_06_10_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00135738 Jy ! Component: 100 - total flux cleaned = -0.00142532 Jy ! Component: 150 - total flux cleaned = -0.00124233 Jy ! Component: 200 - total flux cleaned = -0.00112769 Jy ! Component: 250 - total flux cleaned = -0.00107194 Jy ! Component: 300 - total flux cleaned = -0.00101758 Jy ! Component: 350 - total flux cleaned = -0.000966469 Jy ! Component: 400 - total flux cleaned = -0.00111709 Jy ! Component: 450 - total flux cleaned = -0.00116623 Jy ! Component: 500 - total flux cleaned = -0.00135431 Jy ! Component: 550 - total flux cleaned = -0.00130725 Jy ! Component: 600 - total flux cleaned = -0.0013978 Jy ! Component: 650 - total flux cleaned = -0.00166283 Jy ! Component: 700 - total flux cleaned = -0.00170594 Jy ! Component: 750 - total flux cleaned = -0.00191873 Jy ! Component: 800 - total flux cleaned = -0.00204474 Jy ! Component: 850 - total flux cleaned = -0.00216879 Jy ! Component: 900 - total flux cleaned = -0.00253279 Jy ! Component: 950 - total flux cleaned = -0.00277142 Jy ! Component: 1000 - total flux cleaned = -0.00300663 Jy ! Component: 1050 - total flux cleaned = -0.00327701 Jy ! Component: 1100 - total flux cleaned = -0.00346683 Jy ! Component: 1150 - total flux cleaned = -0.0036914 Jy ! Component: 1200 - total flux cleaned = -0.0039134 Jy ! Component: 1250 - total flux cleaned = -0.00416815 Jy ! Component: 1300 - total flux cleaned = -0.00434809 Jy ! Component: 1350 - total flux cleaned = -0.00463158 Jy ! Component: 1400 - total flux cleaned = -0.00491112 Jy ! Component: 1450 - total flux cleaned = -0.0050832 Jy ! Component: 1500 - total flux cleaned = -0.00532189 Jy ! Component: 1550 - total flux cleaned = -0.00552461 Jy ! Component: 1600 - total flux cleaned = -0.005758 Jy ! Component: 1650 - total flux cleaned = -0.00608645 Jy ! Component: 1700 - total flux cleaned = -0.00615111 Jy ! Component: 1750 - total flux cleaned = -0.00650359 Jy ! Component: 1800 - total flux cleaned = -0.00663054 Jy ! Component: 1850 - total flux cleaned = -0.0068188 Jy ! Component: 1900 - total flux cleaned = -0.00712855 Jy ! Component: 1950 - total flux cleaned = -0.00734304 Jy ! Component: 2000 - total flux cleaned = -0.00755554 Jy ! Component: 2050 - total flux cleaned = -0.00773529 Jy ! Component: 2100 - total flux cleaned = -0.0080326 Jy ! Component: 2150 - total flux cleaned = -0.00815011 Jy ! Component: 2200 - total flux cleaned = -0.0084124 Jy ! Component: 2250 - total flux cleaned = -0.00864308 Jy ! Component: 2300 - total flux cleaned = -0.00881436 Jy ! Component: 2350 - total flux cleaned = -0.0090411 Jy ! Component: 2400 - total flux cleaned = -0.00923704 Jy ! Component: 2450 - total flux cleaned = -0.0094041 Jy ! Component: 2500 - total flux cleaned = -0.00959705 Jy ! Component: 2550 - total flux cleaned = -0.00978831 Jy ! Component: 2600 - total flux cleaned = -0.0100589 Jy ! Component: 2650 - total flux cleaned = -0.0102731 Jy ! Component: 2700 - total flux cleaned = -0.0103526 Jy ! Component: 2750 - total flux cleaned = -0.0105633 Jy ! Component: 2800 - total flux cleaned = -0.0107197 Jy ! Component: 2850 - total flux cleaned = -0.010875 Jy ! Component: 2900 - total flux cleaned = -0.0111314 Jy ! Component: 2950 - total flux cleaned = -0.0112585 Jy ! Component: 3000 - total flux cleaned = -0.0114352 Jy ! Component: 3050 - total flux cleaned = -0.0116102 Jy ! Component: 3100 - total flux cleaned = -0.0117094 Jy ! Component: 3150 - total flux cleaned = -0.0118819 Jy ! Component: 3200 - total flux cleaned = -0.0120038 Jy ! Component: 3250 - total flux cleaned = -0.012101 Jy ! Component: 3300 - total flux cleaned = -0.0121977 Jy ! Component: 3350 - total flux cleaned = -0.0123888 Jy ! Component: 3400 - total flux cleaned = -0.0124126 Jy ! Component: 3450 - total flux cleaned = -0.0124834 Jy ! Component: 3500 - total flux cleaned = -0.0126934 Jy ! Component: 3550 - total flux cleaned = -0.012763 Jy ! Component: 3600 - total flux cleaned = -0.0129242 Jy ! Component: 3650 - total flux cleaned = -0.0130385 Jy ! Component: 3700 - total flux cleaned = -0.0131749 Jy ! Component: 3750 - total flux cleaned = -0.0132425 Jy ! Component: 3800 - total flux cleaned = -0.0133769 Jy ! Component: 3850 - total flux cleaned = -0.013488 Jy ! Component: 3900 - total flux cleaned = -0.0135319 Jy ! Component: 3950 - total flux cleaned = -0.0136197 Jy ! Component: 4000 - total flux cleaned = -0.0137289 Jy ! Component: 4050 - total flux cleaned = -0.0138591 Jy ! Total flux subtracted in 4096 components = -0.0139883 Jy ! Clean residual min=-0.001247 max=0.001163 Jy/beam ! Clean residual mean=0.000003 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.0445183 Jy keep ! Adding 288 model components to the UV plane model. ! The established model now contains 332 components and 0.0445183 Jy ![Exited script file: muppet] wmap "J0010+1058_S_2017_06_10_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.694 x 8.329 at 1.004 degrees (North through East) ! Clean map min=-0.0029048 max=0.057093 Jy/beam ! Writing clean map to FITS file: J0010+1058_S_2017_06_10_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0570932 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00039728 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.08754 2.08754 4.17507 8.35015 16.7003 33.4006 66.8012 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.057 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.694 x 8.329 at 1.004 degrees (North through East) ! Clean map min=-0.0029048 max=0.057093 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010+1058_S_2017_06_10_pus_uvs.log closed on Mon May 6 14:39:15 2019