! Started logfile: J0010+1058_S_2017_05_31_pus_uvs.log on Tue Feb 5 21:28:18 2019 obs J0010+1058_S_2017_05_31_pus_uva.fits ! Reading UV FITS file: J0010+1058_S_2017_05_31_pus_uva.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.808333 visibilities/baseline/integration-bin. ! Found source: J0010+1058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 703 lines of history. ! ! Reading 6984 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010+1058_S_2017_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 52 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 60 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 280 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.999140Jy sigma=0.009410 ! Fit after self-cal, rms=0.946843Jy sigma=0.008940 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.742 mas, bmaj=6.937 mas, bpa=-4.525 degrees ! Estimated noise=1287.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0427054 Jy ! Component: 100 - total flux cleaned = 0.0521929 Jy ! Total flux subtracted in 100 components = 0.0521929 Jy ! Clean residual min=-0.004034 max=0.003879 Jy/beam ! Clean residual mean=-0.000017 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 0.0521929 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.0521929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076544Jy sigma=0.000658 ! Fit after self-cal, rms=0.075880Jy sigma=0.000650 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.436 mas, bmaj=7.919 mas, bpa=-2.611 degrees ! Estimated noise=1030.3 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00423548 Jy ! Component: 100 - total flux cleaned = 0.00595092 Jy ! Component: 150 - total flux cleaned = 0.00682153 Jy ! Component: 200 - total flux cleaned = 0.00710508 Jy ! Total flux subtracted in 200 components = 0.00710508 Jy ! Clean residual min=-0.002513 max=0.002579 Jy/beam ! Clean residual mean=-0.000019 rms=0.000677 Jy/beam ! Combined flux in latest and established models = 0.059298 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 21 components and 0.059298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075628Jy sigma=0.000648 ! Fit after self-cal, rms=0.075638Jy sigma=0.000648 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.01 KP 0.97 ! LA 1.00 MK 1.00 NL 1.01 OV 1.00 ! PT 0.99 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.98 HN 1.03 KP 0.98 ! LA 0.98 MK 0.98 NL 1.03 OV 1.17 ! PT 0.98 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.03 HN 0.87 KP 0.98 ! LA 0.94 MK 1.03 NL 1.01 OV 1.00 ! PT 1.05 SC 1.06 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.87 HN 0.88 KP 0.84 ! LA 0.86 MK 1.19 NL 1.00* OV 1.00* ! PT 1.08 SC 1.00* ! ! ! Fit before self-cal, rms=0.075638Jy sigma=0.000648 ! Fit after self-cal, rms=0.074449Jy sigma=0.000647 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.455 mas, bmaj=7.951 mas, bpa=-2.886 degrees ! Estimated noise=1030.63 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000185018 Jy ! Component: 100 - total flux cleaned = -0.000142316 Jy ! Component: 150 - total flux cleaned = -0.000127573 Jy ! Component: 200 - total flux cleaned = -0.000112487 Jy ! Total flux subtracted in 200 components = -0.000112487 Jy ! Clean residual min=-0.002410 max=0.002620 Jy/beam ! Clean residual mean=-0.000011 rms=0.000658 Jy/beam ! Combined flux in latest and established models = 0.0591855 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 27 components and 0.0591855 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074439Jy sigma=0.000647 ! Fit after self-cal, rms=0.074434Jy sigma=0.000647 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074434Jy sigma=0.000647 ! Fit after self-cal, rms=0.076106Jy sigma=0.000644 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.465 mas, bmaj=7.947 mas, bpa=-2.933 degrees ! Estimated noise=1032.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00021571 Jy ! Component: 100 - total flux cleaned = -0.000214713 Jy ! Component: 150 - total flux cleaned = -0.000183842 Jy ! Component: 200 - total flux cleaned = -0.000170836 Jy ! Total flux subtracted in 200 components = -0.000170836 Jy ! Clean residual min=-0.002566 max=0.002514 Jy/beam ! Clean residual mean=-0.000005 rms=0.000647 Jy/beam ! Combined flux in latest and established models = 0.0590147 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 28 components and 0.0590147 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076098Jy sigma=0.000644 ! Fit after self-cal, rms=0.076220Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000163199 Jy ! Component: 100 - total flux cleaned = -0.000176354 Jy ! Component: 150 - total flux cleaned = -0.000188923 Jy ! Component: 200 - total flux cleaned = -0.000177891 Jy ! Total flux subtracted in 200 components = -0.000177891 Jy ! Clean residual min=-0.002528 max=0.002509 Jy/beam ! Clean residual mean=-0.000007 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0588368 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 32 components and 0.0588368 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076216Jy sigma=0.000644 ! Fit after self-cal, rms=0.076214Jy sigma=0.000644 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.076214Jy sigma=0.000644 ! Fit after self-cal, rms=0.077976Jy sigma=0.000640 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.469 mas, bmaj=7.97 mas, bpa=-3.066 degrees ! Estimated noise=1035.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.96648e-05 Jy ! Component: 100 - total flux cleaned = -4.96653e-05 Jy ! Component: 150 - total flux cleaned = -6.18162e-05 Jy ! Component: 200 - total flux cleaned = -7.2593e-05 Jy ! Total flux subtracted in 200 components = -7.2593e-05 Jy ! Clean residual min=-0.002530 max=0.002535 Jy/beam ! Clean residual mean=-0.000007 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0587642 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 34 components and 0.0587642 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077971Jy sigma=0.000640 ! Fit after self-cal, rms=0.078106Jy sigma=0.000640 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.87569e-06 Jy ! Component: 100 - total flux cleaned = -1.57415e-05 Jy ! Component: 150 - total flux cleaned = -3.23466e-05 Jy ! Component: 200 - total flux cleaned = -4.74806e-05 Jy ! Total flux subtracted in 200 components = -4.74806e-05 Jy ! Clean residual min=-0.002509 max=0.002529 Jy/beam ! Clean residual mean=-0.000007 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0587167 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.0587167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078104Jy sigma=0.000640 ! Fit after self-cal, rms=0.078104Jy sigma=0.000640 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078104Jy sigma=0.000640 ! Fit after self-cal, rms=0.078687Jy sigma=0.000639 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.931 mas, bmaj=11.82 mas, bpa=-5.74 degrees ! Estimated noise=1256.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000293013 Jy ! Component: 100 - total flux cleaned = -0.000280819 Jy ! Component: 150 - total flux cleaned = -0.000280787 Jy ! Component: 200 - total flux cleaned = -0.000280761 Jy ! Total flux subtracted in 200 components = -0.000280761 Jy ! Clean residual min=-0.002885 max=0.002738 Jy/beam ! Clean residual mean=-0.000015 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.0584359 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 44 components and 0.0584359 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078688Jy sigma=0.000639 ! Fit after self-cal, rms=0.078736Jy sigma=0.000639 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.96779e-05 Jy ! Component: 100 - total flux cleaned = -4.38841e-05 Jy ! Component: 150 - total flux cleaned = -3.40723e-05 Jy ! Component: 200 - total flux cleaned = -3.40899e-05 Jy ! Total flux subtracted in 200 components = -3.40899e-05 Jy ! Clean residual min=-0.002875 max=0.002736 Jy/beam ! Clean residual mean=-0.000014 rms=0.000749 Jy/beam ! Combined flux in latest and established models = 0.0584018 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 45 components and 0.0584018 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078736Jy sigma=0.000639 ! Fit after self-cal, rms=0.078737Jy sigma=0.000639 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.988 mas, bpa=-3.187 degrees ! Estimated noise=1033.61 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 7.988 at -3.187 degrees (North through East) ! Clean map min=-0.0024 max=0.05647 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=6.998 mas, bpa=-5.054 degrees ! Estimated noise=1297.87 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0435332 Jy ! Component: 100 - total flux cleaned = 0.0531572 Jy ! Component: 150 - total flux cleaned = 0.0566371 Jy ! Component: 200 - total flux cleaned = 0.0577616 Jy ! Total flux subtracted in 200 components = 0.0577616 Jy ! Clean residual min=-0.003432 max=0.003641 Jy/beam ! Clean residual mean=-0.000006 rms=0.000816 Jy/beam ! Combined flux in latest and established models = 0.0577616 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0577616 Jy ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.988 mas, bpa=-3.187 degrees ! Estimated noise=1033.61 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000851333 Jy ! Component: 100 - total flux cleaned = 0.000816913 Jy ! Component: 150 - total flux cleaned = 0.000816856 Jy ! Component: 200 - total flux cleaned = 0.000816068 Jy ! Total flux subtracted in 200 components = 0.000816068 Jy ! Clean residual min=-0.002477 max=0.002580 Jy/beam ! Clean residual mean=-0.000007 rms=0.000637 Jy/beam ! Combined flux in latest and established models = 0.0585776 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 19 components and 0.0585776 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.931 mas, bmaj=11.82 mas, bpa=-5.74 degrees ! Estimated noise=1256.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.97977e-05 Jy ! Component: 100 - total flux cleaned = -5.23252e-06 Jy ! Component: 150 - total flux cleaned = -2.4491e-05 Jy ! Component: 200 - total flux cleaned = -4.15992e-05 Jy ! Total flux subtracted in 200 components = -4.15992e-05 Jy ! Clean residual min=-0.002862 max=0.002721 Jy/beam ! Clean residual mean=-0.000014 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.058536 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.51394e-05 Jy ! Component: 100 - total flux cleaned = -2.83631e-05 Jy ! Component: 150 - total flux cleaned = -3.43206e-05 Jy ! Component: 200 - total flux cleaned = -3.47855e-05 Jy ! Total flux subtracted in 200 components = -3.47855e-05 Jy ! Clean residual min=-0.002863 max=0.002720 Jy/beam ! Clean residual mean=-0.000014 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.0585012 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 0.0585012 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=7.988 mas, bpa=-3.187 degrees ! Estimated noise=1033.61 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.39393e-05 Jy ! Component: 100 - total flux cleaned = -5.94232e-05 Jy ! Component: 150 - total flux cleaned = -9.0877e-05 Jy ! Component: 200 - total flux cleaned = -0.000104858 Jy ! Total flux subtracted in 200 components = -0.000104858 Jy ! Clean residual min=-0.002476 max=0.002525 Jy/beam ! Clean residual mean=-0.000007 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.0583964 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 42 components and 0.0583964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078743Jy sigma=0.000639 ! Fit after self-cal, rms=0.078740Jy sigma=0.000639 wmodel J0010+1058_S_2017_05_31_pus_map.mod ! Writing 42 model components to file: J0010+1058_S_2017_05_31_pus_map.mod wobs J0010+1058_S_2017_05_31_pus_uvs.fits ! Writing UV FITS file: J0010+1058_S_2017_05_31_pus_uvs.fits wwins J0010+1058_S_2017_05_31_pus_map.win ! wwins: Wrote 1 windows to J0010+1058_S_2017_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017659 Jy ! Component: 100 - total flux cleaned = -0.000482599 Jy ! Component: 150 - total flux cleaned = -0.000814876 Jy ! Component: 200 - total flux cleaned = -0.000974547 Jy ! Component: 250 - total flux cleaned = -0.00113041 Jy ! Component: 300 - total flux cleaned = -0.00116827 Jy ! Component: 350 - total flux cleaned = -0.00135389 Jy ! Component: 400 - total flux cleaned = -0.00149913 Jy ! Component: 450 - total flux cleaned = -0.00171388 Jy ! Component: 500 - total flux cleaned = -0.00181915 Jy ! Component: 550 - total flux cleaned = -0.00192352 Jy ! Component: 600 - total flux cleaned = -0.00212905 Jy ! Component: 650 - total flux cleaned = -0.00229718 Jy ! Component: 700 - total flux cleaned = -0.00233022 Jy ! Component: 750 - total flux cleaned = -0.0024616 Jy ! Component: 800 - total flux cleaned = -0.00246184 Jy ! Component: 850 - total flux cleaned = -0.00259046 Jy ! Component: 900 - total flux cleaned = -0.00259092 Jy ! Component: 950 - total flux cleaned = -0.00268515 Jy ! Component: 1000 - total flux cleaned = -0.00268532 Jy ! Component: 1050 - total flux cleaned = -0.00274634 Jy ! Component: 1100 - total flux cleaned = -0.00262468 Jy ! Component: 1150 - total flux cleaned = -0.00271469 Jy ! Component: 1200 - total flux cleaned = -0.00256499 Jy ! Component: 1250 - total flux cleaned = -0.00247614 Jy ! Component: 1300 - total flux cleaned = -0.002535 Jy ! Component: 1350 - total flux cleaned = -0.00244739 Jy ! Component: 1400 - total flux cleaned = -0.00250443 Jy ! Component: 1450 - total flux cleaned = -0.00230417 Jy ! Component: 1500 - total flux cleaned = -0.00230396 Jy ! Component: 1550 - total flux cleaned = -0.00233231 Jy ! Component: 1600 - total flux cleaned = -0.00224855 Jy ! Component: 1650 - total flux cleaned = -0.00224904 Jy ! Component: 1700 - total flux cleaned = -0.00238715 Jy ! Component: 1750 - total flux cleaned = -0.0023048 Jy ! Component: 1800 - total flux cleaned = -0.00219593 Jy ! Component: 1850 - total flux cleaned = -0.0023315 Jy ! Component: 1900 - total flux cleaned = -0.00225061 Jy ! Component: 1950 - total flux cleaned = -0.0022238 Jy ! Component: 2000 - total flux cleaned = -0.00214418 Jy ! Component: 2050 - total flux cleaned = -0.00222328 Jy ! Component: 2100 - total flux cleaned = -0.00217093 Jy ! Component: 2150 - total flux cleaned = -0.00214532 Jy ! Component: 2200 - total flux cleaned = -0.00219697 Jy ! Component: 2250 - total flux cleaned = -0.00214571 Jy ! Component: 2300 - total flux cleaned = -0.00214567 Jy ! Component: 2350 - total flux cleaned = -0.00224726 Jy ! Component: 2400 - total flux cleaned = -0.00219626 Jy ! Component: 2450 - total flux cleaned = -0.00229691 Jy ! Component: 2500 - total flux cleaned = -0.00229693 Jy ! Component: 2550 - total flux cleaned = -0.00224707 Jy ! Component: 2600 - total flux cleaned = -0.00239523 Jy ! Component: 2650 - total flux cleaned = -0.00239522 Jy ! Component: 2700 - total flux cleaned = -0.00237085 Jy ! Component: 2750 - total flux cleaned = -0.00237131 Jy ! Component: 2800 - total flux cleaned = -0.00249185 Jy ! Component: 2850 - total flux cleaned = -0.00244384 Jy ! Component: 2900 - total flux cleaned = -0.00251516 Jy ! Component: 2950 - total flux cleaned = -0.00251514 Jy ! Component: 3000 - total flux cleaned = -0.0024679 Jy ! Component: 3050 - total flux cleaned = -0.00244449 Jy ! Component: 3100 - total flux cleaned = -0.00258473 Jy ! Component: 3150 - total flux cleaned = -0.0026775 Jy ! Component: 3200 - total flux cleaned = -0.00260827 Jy ! Component: 3250 - total flux cleaned = -0.00260795 Jy ! Component: 3300 - total flux cleaned = -0.00269933 Jy ! Component: 3350 - total flux cleaned = -0.00283546 Jy ! Component: 3400 - total flux cleaned = -0.00278999 Jy ! Component: 3450 - total flux cleaned = -0.0026999 Jy ! Component: 3500 - total flux cleaned = -0.00283409 Jy ! Component: 3550 - total flux cleaned = -0.00274487 Jy ! Component: 3600 - total flux cleaned = -0.00272267 Jy ! Component: 3650 - total flux cleaned = -0.00272271 Jy ! Component: 3700 - total flux cleaned = -0.00274479 Jy ! Component: 3750 - total flux cleaned = -0.00276665 Jy ! Component: 3800 - total flux cleaned = -0.00270142 Jy ! Component: 3850 - total flux cleaned = -0.00263641 Jy ! Component: 3900 - total flux cleaned = -0.00270112 Jy ! Component: 3950 - total flux cleaned = -0.00261527 Jy ! Component: 4000 - total flux cleaned = -0.00263669 Jy ! Component: 4050 - total flux cleaned = -0.00255147 Jy ! Total flux subtracted in 4096 components = -0.00257264 Jy ! Clean residual min=-0.001324 max=0.001376 Jy/beam ! Clean residual mean=-0.000001 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 0.0558237 Jy keep ! Adding 304 model components to the UV plane model. ! The established model now contains 346 components and 0.0558238 Jy ![Exited script file: muppet] wmap "J0010+1058_S_2017_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 7.988 at -3.187 degrees (North through East) ! Clean map min=-0.0022058 max=0.056385 Jy/beam ! Writing clean map to FITS file: J0010+1058_S_2017_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0563854 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000406446 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.16251 2.16251 4.32502 8.65003 17.3001 34.6001 69.2002 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.056 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 7.988 at -3.187 degrees (North through East) ! Clean map min=-0.0022058 max=0.056385 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010+1058_S_2017_05_31_pus_uvs.log closed on Tue Feb 5 21:28:24 2019