! Started logfile: J0010+1058_S_2017_05_27_pus_uvs.log on Fri May 3 10:52:23 2019 obs J0010+1058_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0010+1058_S_2017_05_27_pus_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.85284 visibilities/baseline/integration-bin. ! Found source: J0010+1058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 6908 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010+1058_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 267 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.992308Jy sigma=0.041539 ! Fit after self-cal, rms=0.943550Jy sigma=0.041046 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=6.835 mas, bpa=-5.766 degrees ! Estimated noise=788.454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266331 Jy ! Component: 100 - total flux cleaned = 0.0343411 Jy ! Total flux subtracted in 100 components = 0.0343411 Jy ! Clean residual min=-0.010307 max=0.010749 Jy/beam ! Clean residual mean=-0.000005 rms=0.002724 Jy/beam ! Combined flux in latest and established models = 0.0343411 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0343411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092664Jy sigma=0.001336 ! Fit after self-cal, rms=0.092425Jy sigma=0.001300 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.616 mas, bmaj=7.52 mas, bpa=-2.366 degrees ! Estimated noise=710.701 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00762021 Jy ! Component: 100 - total flux cleaned = 0.00985016 Jy ! Component: 150 - total flux cleaned = 0.00973193 Jy ! Component: 200 - total flux cleaned = 0.00965163 Jy ! Total flux subtracted in 200 components = 0.00965163 Jy ! Clean residual min=-0.008683 max=0.009044 Jy/beam ! Clean residual mean=-0.000048 rms=0.002304 Jy/beam ! Combined flux in latest and established models = 0.0439927 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0439927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090461Jy sigma=0.001473 ! Fit after self-cal, rms=0.090419Jy sigma=0.001473 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 12.50 FD 0.70 HN 1.01 KP 0.79 ! LA 0.83 MK 1.03 NL 0.91 OV 0.90 ! PT 0.93 SC 0.71 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.65 FD 0.76 HN 0.89 KP 0.80 ! LA 0.81 MK 0.95 NL 0.91 OV 0.87 ! PT 0.81 SC 0.75 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.53 FD 0.80 HN 0.83 KP 0.86 ! LA 0.87 MK 0.89 NL 0.90 OV 0.83 ! PT 0.80 SC 0.76 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.89 HN 0.81 KP 1.00* ! LA 20.94 MK 1.05 NL 1.00* OV 1.00* ! PT 0.84 SC 1.00* ! ! ! Fit before self-cal, rms=0.090419Jy sigma=0.001473 ! Fit after self-cal, rms=0.466419Jy sigma=0.000683 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.361 mas, bmaj=7.7 mas, bpa=-0.4798 degrees ! Estimated noise=793.871 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00198588 Jy ! Component: 100 - total flux cleaned = 0.00179207 Jy ! Component: 150 - total flux cleaned = 0.00155898 Jy ! Component: 200 - total flux cleaned = 0.00143523 Jy ! Total flux subtracted in 200 components = 0.00143523 Jy ! Clean residual min=-0.002902 max=0.002326 Jy/beam ! Clean residual mean=-0.000003 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0454279 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 18 components and 0.0454279 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.465731Jy sigma=0.000683 ! Fit after self-cal, rms=0.466909Jy sigma=0.000673 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.466909Jy sigma=0.000673 ! Fit after self-cal, rms=0.670047Jy sigma=0.000664 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.378 mas, bmaj=7.729 mas, bpa=-0.9845 degrees ! Estimated noise=807.728 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207181 Jy ! Component: 100 - total flux cleaned = 0.00213151 Jy ! Component: 150 - total flux cleaned = 0.00213165 Jy ! Component: 200 - total flux cleaned = 0.0020932 Jy ! Total flux subtracted in 200 components = 0.0020932 Jy ! Clean residual min=-0.002353 max=0.002734 Jy/beam ! Clean residual mean=-0.000007 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0475211 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.0475211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.669710Jy sigma=0.000664 ! Fit after self-cal, rms=0.669820Jy sigma=0.000663 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (12.5, -7.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0024367 Jy ! Component: 100 - total flux cleaned = 0.00313018 Jy ! Component: 150 - total flux cleaned = 0.00321271 Jy ! Component: 200 - total flux cleaned = 0.00328534 Jy ! Total flux subtracted in 200 components = 0.00328534 Jy ! Clean residual min=-0.002177 max=0.001972 Jy/beam ! Clean residual mean=-0.000006 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.0508065 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 43 components and 0.0508065 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.669615Jy sigma=0.000663 ! Fit after self-cal, rms=0.669641Jy sigma=0.000663 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.669641Jy sigma=0.000663 ! Fit after self-cal, rms=0.060159Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.385 mas, bmaj=7.68 mas, bpa=-1.568 degrees ! Estimated noise=799.727 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000674165 Jy ! Component: 100 - total flux cleaned = 0.000794887 Jy ! Component: 150 - total flux cleaned = 0.000845834 Jy ! Component: 200 - total flux cleaned = 0.000846179 Jy ! Total flux subtracted in 200 components = 0.000846179 Jy ! Clean residual min=-0.001749 max=0.001833 Jy/beam ! Clean residual mean=-0.000002 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0516527 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.0516527 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060122Jy sigma=0.000647 ! Fit after self-cal, rms=0.059804Jy sigma=0.000645 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000356649 Jy ! Component: 100 - total flux cleaned = 0.000420497 Jy ! Component: 150 - total flux cleaned = 0.000459392 Jy ! Component: 200 - total flux cleaned = 0.000495526 Jy ! Total flux subtracted in 200 components = 0.000495526 Jy ! Clean residual min=-0.001853 max=0.001762 Jy/beam ! Clean residual mean=-0.000004 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0521482 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 77 components and 0.0521482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059788Jy sigma=0.000644 ! Fit after self-cal, rms=0.059788Jy sigma=0.000644 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059788Jy sigma=0.000644 ! Fit after self-cal, rms=0.058432Jy sigma=0.000644 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.725 mas, bmaj=11.41 mas, bpa=-0.9787 degrees ! Estimated noise=977.071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00027634 Jy ! Component: 100 - total flux cleaned = -0.00028782 Jy ! Component: 150 - total flux cleaned = -0.000298162 Jy ! Component: 200 - total flux cleaned = -0.000318419 Jy ! Total flux subtracted in 200 components = -0.000318419 Jy ! Clean residual min=-0.002006 max=0.001914 Jy/beam ! Clean residual mean=-0.000006 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0518298 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 94 components and 0.0518298 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058428Jy sigma=0.000644 ! Fit after self-cal, rms=0.058404Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -8.87865e-05 Jy ! Component: 100 - total flux cleaned = -8.94241e-05 Jy ! Component: 150 - total flux cleaned = -8.93165e-05 Jy ! Component: 200 - total flux cleaned = -8.1819e-05 Jy ! Total flux subtracted in 200 components = -8.1819e-05 Jy ! Clean residual min=-0.002044 max=0.001861 Jy/beam ! Clean residual mean=-0.000006 rms=0.000533 Jy/beam ! Combined flux in latest and established models = 0.0517479 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 104 components and 0.0517479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058402Jy sigma=0.000644 ! Fit after self-cal, rms=0.058402Jy sigma=0.000644 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=7.67 mas, bpa=-2.007 degrees ! Estimated noise=797.535 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.375 x 7.67 at -2.007 degrees (North through East) ! Clean map min=-0.0017711 max=0.04367 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.775 mas, bmaj=6.732 mas, bpa=-4.205 degrees ! Estimated noise=976.161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0348009 Jy ! Component: 100 - total flux cleaned = 0.0428736 Jy ! Component: 150 - total flux cleaned = 0.0465257 Jy ! Component: 200 - total flux cleaned = 0.0491336 Jy ! Total flux subtracted in 200 components = 0.0491336 Jy ! Clean residual min=-0.002823 max=0.002314 Jy/beam ! Clean residual mean=-0.000001 rms=0.000596 Jy/beam ! Combined flux in latest and established models = 0.0491336 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0491336 Jy ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=7.67 mas, bpa=-2.007 degrees ! Estimated noise=797.535 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00170476 Jy ! Component: 100 - total flux cleaned = 0.00238114 Jy ! Component: 150 - total flux cleaned = 0.00261751 Jy ! Component: 200 - total flux cleaned = 0.00271852 Jy ! Total flux subtracted in 200 components = 0.00271852 Jy ! Clean residual min=-0.001824 max=0.001739 Jy/beam ! Clean residual mean=-0.000003 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 0.0518521 Jy ! Adding 28 model components to the UV plane model. ! The established model now contains 36 components and 0.0518521 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.725 mas, bmaj=11.41 mas, bpa=-0.9787 degrees ! Estimated noise=977.071 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.68438e-05 Jy ! Component: 100 - total flux cleaned = -4.41766e-05 Jy ! Component: 150 - total flux cleaned = -7.47809e-05 Jy ! Component: 200 - total flux cleaned = -8.8442e-05 Jy ! Total flux subtracted in 200 components = -8.8442e-05 Jy ! Clean residual min=-0.002048 max=0.001883 Jy/beam ! Clean residual mean=-0.000006 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0517637 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.21308e-07 Jy ! Component: 100 - total flux cleaned = 1.19727e-05 Jy ! Component: 150 - total flux cleaned = 1.47444e-06 Jy ! Component: 200 - total flux cleaned = -1.78387e-05 Jy ! Total flux subtracted in 200 components = -1.78387e-05 Jy ! Clean residual min=-0.002048 max=0.001878 Jy/beam ! Clean residual mean=-0.000006 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.0517458 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 71 components and 0.0517458 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.375 mas, bmaj=7.67 mas, bpa=-2.007 degrees ! Estimated noise=797.535 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100116 Jy ! Component: 100 - total flux cleaned = 0.000217957 Jy ! Component: 150 - total flux cleaned = 0.000282161 Jy ! Component: 200 - total flux cleaned = 0.000302264 Jy ! Total flux subtracted in 200 components = 0.000302264 Jy ! Clean residual min=-0.001856 max=0.001737 Jy/beam ! Clean residual mean=-0.000003 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 0.0520481 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.0520481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058421Jy sigma=0.000644 ! Fit after self-cal, rms=0.058418Jy sigma=0.000644 wmodel J0010+1058_S_2017_05_27_pus_map.mod ! Writing 89 model components to file: J0010+1058_S_2017_05_27_pus_map.mod wobs J0010+1058_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0010+1058_S_2017_05_27_pus_uvs.fits wwins J0010+1058_S_2017_05_27_pus_map.win ! wwins: Wrote 2 windows to J0010+1058_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107815 Jy ! Component: 100 - total flux cleaned = -0.000202638 Jy ! Component: 150 - total flux cleaned = -0.000232919 Jy ! Component: 200 - total flux cleaned = -0.000203211 Jy ! Component: 250 - total flux cleaned = -0.00020364 Jy ! Component: 300 - total flux cleaned = -0.000176175 Jy ! Component: 350 - total flux cleaned = -0.000203775 Jy ! Component: 400 - total flux cleaned = -0.000284131 Jy ! Component: 450 - total flux cleaned = -0.000336818 Jy ! Component: 500 - total flux cleaned = -0.000492637 Jy ! Component: 550 - total flux cleaned = -0.000517657 Jy ! Component: 600 - total flux cleaned = -0.000416639 Jy ! Component: 650 - total flux cleaned = -0.000392062 Jy ! Component: 700 - total flux cleaned = -0.000440966 Jy ! Component: 750 - total flux cleaned = -0.000343543 Jy ! Component: 800 - total flux cleaned = -0.000367465 Jy ! Component: 850 - total flux cleaned = -0.000319563 Jy ! Component: 900 - total flux cleaned = -0.000296049 Jy ! Component: 950 - total flux cleaned = -0.000295992 Jy ! Component: 1000 - total flux cleaned = -0.000250308 Jy ! Component: 1050 - total flux cleaned = -0.00029541 Jy ! Component: 1100 - total flux cleaned = -0.000205589 Jy ! Component: 1150 - total flux cleaned = -0.000183569 Jy ! Component: 1200 - total flux cleaned = -0.000205807 Jy ! Component: 1250 - total flux cleaned = -0.000140312 Jy ! Component: 1300 - total flux cleaned = -0.000118937 Jy ! Component: 1350 - total flux cleaned = -5.47049e-05 Jy ! Component: 1400 - total flux cleaned = -5.46289e-05 Jy ! Component: 1450 - total flux cleaned = -5.47132e-05 Jy ! Component: 1500 - total flux cleaned = -5.4895e-05 Jy ! Component: 1550 - total flux cleaned = -5.4582e-05 Jy ! Component: 1600 - total flux cleaned = -5.45253e-05 Jy ! Component: 1650 - total flux cleaned = -9.53277e-05 Jy ! Component: 1700 - total flux cleaned = -0.000115542 Jy ! Component: 1750 - total flux cleaned = -0.000155575 Jy ! Component: 1800 - total flux cleaned = -0.000135767 Jy ! Component: 1850 - total flux cleaned = -0.000175601 Jy ! Component: 1900 - total flux cleaned = -0.000155892 Jy ! Component: 1950 - total flux cleaned = -0.000214405 Jy ! Component: 2000 - total flux cleaned = -0.000175521 Jy ! Component: 2050 - total flux cleaned = -0.000252763 Jy ! Component: 2100 - total flux cleaned = -0.000233629 Jy ! Component: 2150 - total flux cleaned = -0.000252651 Jy ! Component: 2200 - total flux cleaned = -0.000347169 Jy ! Component: 2250 - total flux cleaned = -0.00032836 Jy ! Component: 2300 - total flux cleaned = -0.000309612 Jy ! Component: 2350 - total flux cleaned = -0.000328149 Jy ! Component: 2400 - total flux cleaned = -0.000346707 Jy ! Component: 2450 - total flux cleaned = -0.000346485 Jy ! Component: 2500 - total flux cleaned = -0.00034643 Jy ! Component: 2550 - total flux cleaned = -0.000273726 Jy ! Component: 2600 - total flux cleaned = -0.000454678 Jy ! Component: 2650 - total flux cleaned = -0.000400806 Jy ! Component: 2700 - total flux cleaned = -0.000346888 Jy ! Component: 2750 - total flux cleaned = -0.000507344 Jy ! Component: 2800 - total flux cleaned = -0.000507378 Jy ! Component: 2850 - total flux cleaned = -0.000507293 Jy ! Component: 2900 - total flux cleaned = -0.0004898 Jy ! Component: 2950 - total flux cleaned = -0.000507179 Jy ! Component: 3000 - total flux cleaned = -0.000472487 Jy ! Component: 3050 - total flux cleaned = -0.00052454 Jy ! Component: 3100 - total flux cleaned = -0.000593503 Jy ! Component: 3150 - total flux cleaned = -0.000610606 Jy ! Component: 3200 - total flux cleaned = -0.000593572 Jy ! Component: 3250 - total flux cleaned = -0.000627395 Jy ! Component: 3300 - total flux cleaned = -0.000627479 Jy ! Component: 3350 - total flux cleaned = -0.000627483 Jy ! Component: 3400 - total flux cleaned = -0.000694483 Jy ! Component: 3450 - total flux cleaned = -0.00072763 Jy ! Component: 3500 - total flux cleaned = -0.000727738 Jy ! Component: 3550 - total flux cleaned = -0.000744263 Jy ! Component: 3600 - total flux cleaned = -0.000777088 Jy ! Component: 3650 - total flux cleaned = -0.000777077 Jy ! Component: 3700 - total flux cleaned = -0.000809721 Jy ! Component: 3750 - total flux cleaned = -0.000874632 Jy ! Component: 3800 - total flux cleaned = -0.000906832 Jy ! Component: 3850 - total flux cleaned = -0.000858519 Jy ! Component: 3900 - total flux cleaned = -0.000890642 Jy ! Component: 3950 - total flux cleaned = -0.000874548 Jy ! Component: 4000 - total flux cleaned = -0.00100163 Jy ! Component: 4050 - total flux cleaned = -0.00101727 Jy ! Total flux subtracted in 4096 components = -0.0010488 Jy ! Clean residual min=-0.000981 max=0.000842 Jy/beam ! Clean residual mean=-0.000001 rms=0.000301 Jy/beam ! Combined flux in latest and established models = 0.0509993 Jy keep ! Adding 310 model components to the UV plane model. ! The established model now contains 399 components and 0.0509993 Jy ![Exited script file: muppet] wmap "J0010+1058_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.375 x 7.67 at -2.007 degrees (North through East) ! Clean map min=-0.0014889 max=0.043669 Jy/beam ! Writing clean map to FITS file: J0010+1058_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0436693 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000301148 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.06883 2.06883 4.13766 8.27532 16.5506 33.1013 66.2025 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.043 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.375 x 7.67 at -2.007 degrees (North through East) ! Clean map min=-0.0014889 max=0.043669 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010+1058_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:52:27 2019