! Started logfile: J0010+1058_S_2017_05_01_pus_uvs.log on Wed May 1 18:21:06 2019 obs J0010+1058_S_2017_05_01_pus_uva.fits ! Reading UV FITS file: J0010+1058_S_2017_05_01_pus_uva.fits ! AN table 1: 36 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.791975 visibilities/baseline/integration-bin. ! Found source: J0010+1058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 788 lines of history. ! ! Reading 5132 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010+1058_S_2017_05_01_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 175 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995823Jy sigma=0.008299 ! Fit after self-cal, rms=0.938436Jy sigma=0.007842 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.911 mas, bmaj=7.042 mas, bpa=-0.09821 degrees ! Estimated noise=1695.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0500713 Jy ! Component: 100 - total flux cleaned = 0.0619922 Jy ! Total flux subtracted in 100 components = 0.0619922 Jy ! Clean residual min=-0.005651 max=0.004916 Jy/beam ! Clean residual mean=-0.000020 rms=0.001242 Jy/beam ! Combined flux in latest and established models = 0.0619922 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0619922 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088586Jy sigma=0.000674 ! Fit after self-cal, rms=0.087427Jy sigma=0.000664 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.506 mas, bmaj=8.049 mas, bpa=1.086 degrees ! Estimated noise=1320.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00608657 Jy ! Component: 100 - total flux cleaned = 0.008629 Jy ! Component: 150 - total flux cleaned = 0.00957866 Jy ! Component: 200 - total flux cleaned = 0.00983005 Jy ! Total flux subtracted in 200 components = 0.00983005 Jy ! Clean residual min=-0.003381 max=0.003530 Jy/beam ! Clean residual mean=-0.000024 rms=0.000900 Jy/beam ! Combined flux in latest and established models = 0.0718223 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 32 components and 0.0718223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087001Jy sigma=0.000662 ! Fit after self-cal, rms=0.087024Jy sigma=0.000661 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.88 HN 1.00 KP 1.08 ! LA 0.89 MK 1.00 NL 1.00 OV 1.11 ! PT 1.01 SC 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.97 HN 1.20 KP 1.02 ! LA 0.98 MK 1.07 NL 1.06 OV 1.10 ! PT 1.03 SC 1.10 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.12 FD 1.02 HN 0.95 KP 0.95 ! LA 0.97 MK 1.07 NL 1.11 OV 0.91 ! PT 0.97 SC 0.99 ! ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.99 HN 1.10 KP 1.00* ! LA 0.76 MK 0.79 NL 1.00* OV 1.00* ! PT 1.04 SC 1.00* ! ! ! Fit before self-cal, rms=0.087024Jy sigma=0.000661 ! Fit after self-cal, rms=0.087119Jy sigma=0.000658 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.553 mas, bmaj=8.091 mas, bpa=0.7233 degrees ! Estimated noise=1324.43 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00028083 Jy ! Component: 100 - total flux cleaned = -0.000280983 Jy ! Component: 150 - total flux cleaned = -0.000281258 Jy ! Component: 200 - total flux cleaned = -0.000280539 Jy ! Total flux subtracted in 200 components = -0.000280539 Jy ! Clean residual min=-0.003233 max=0.003234 Jy/beam ! Clean residual mean=-0.000022 rms=0.000868 Jy/beam ! Combined flux in latest and established models = 0.0715418 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 39 components and 0.0715418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087103Jy sigma=0.000658 ! Fit after self-cal, rms=0.087147Jy sigma=0.000657 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087147Jy sigma=0.000657 ! Fit after self-cal, rms=0.090260Jy sigma=0.000652 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.577 mas, bmaj=8.118 mas, bpa=0.6739 degrees ! Estimated noise=1343.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237231 Jy ! Component: 100 - total flux cleaned = 0.000237465 Jy ! Component: 150 - total flux cleaned = 0.000239247 Jy ! Component: 200 - total flux cleaned = 0.000216557 Jy ! Total flux subtracted in 200 components = 0.000216557 Jy ! Clean residual min=-0.002936 max=0.003202 Jy/beam ! Clean residual mean=-0.000013 rms=0.000815 Jy/beam ! Combined flux in latest and established models = 0.0717583 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.0717583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090236Jy sigma=0.000651 ! Fit after self-cal, rms=0.090385Jy sigma=0.000651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000125705 Jy ! Component: 100 - total flux cleaned = -0.000145416 Jy ! Component: 150 - total flux cleaned = -0.000145091 Jy ! Component: 200 - total flux cleaned = -0.000162951 Jy ! Total flux subtracted in 200 components = -0.000162951 Jy ! Clean residual min=-0.002996 max=0.003069 Jy/beam ! Clean residual mean=-0.000014 rms=0.000819 Jy/beam ! Combined flux in latest and established models = 0.0715954 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 51 components and 0.0715954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090374Jy sigma=0.000651 ! Fit after self-cal, rms=0.090373Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090373Jy sigma=0.000651 ! Fit after self-cal, rms=0.093830Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=8.1 mas, bpa=0.6115 degrees ! Estimated noise=1339.47 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000145557 Jy ! Component: 100 - total flux cleaned = 0.000163801 Jy ! Component: 150 - total flux cleaned = 0.000163827 Jy ! Component: 200 - total flux cleaned = 0.000164672 Jy ! Total flux subtracted in 200 components = 0.000164672 Jy ! Clean residual min=-0.003039 max=0.003047 Jy/beam ! Clean residual mean=-0.000013 rms=0.000798 Jy/beam ! Combined flux in latest and established models = 0.07176 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 53 components and 0.07176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093817Jy sigma=0.000649 ! Fit after self-cal, rms=0.093906Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.07728e-05 Jy ! Component: 100 - total flux cleaned = -4.4933e-05 Jy ! Component: 150 - total flux cleaned = -7.39834e-05 Jy ! Component: 200 - total flux cleaned = -8.82586e-05 Jy ! Total flux subtracted in 200 components = -8.82586e-05 Jy ! Clean residual min=-0.003052 max=0.002989 Jy/beam ! Clean residual mean=-0.000013 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.0716718 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.0716718 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093897Jy sigma=0.000649 ! Fit after self-cal, rms=0.093898Jy sigma=0.000649 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093898Jy sigma=0.000649 ! Fit after self-cal, rms=0.094349Jy sigma=0.000649 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.053 mas, bmaj=11.28 mas, bpa=1.609 degrees ! Estimated noise=1575.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000541721 Jy ! Component: 100 - total flux cleaned = -0.000544967 Jy ! Component: 150 - total flux cleaned = -0.000522553 Jy ! Component: 200 - total flux cleaned = -0.000512331 Jy ! Total flux subtracted in 200 components = -0.000512331 Jy ! Clean residual min=-0.003131 max=0.003040 Jy/beam ! Clean residual mean=-0.000027 rms=0.000874 Jy/beam ! Combined flux in latest and established models = 0.0711595 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 63 components and 0.0711595 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094351Jy sigma=0.000649 ! Fit after self-cal, rms=0.094369Jy sigma=0.000649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000157168 Jy ! Component: 100 - total flux cleaned = -0.00011739 Jy ! Component: 150 - total flux cleaned = -9.55245e-05 Jy ! Component: 200 - total flux cleaned = -7.61536e-05 Jy ! Total flux subtracted in 200 components = -7.61536e-05 Jy ! Clean residual min=-0.003129 max=0.003023 Jy/beam ! Clean residual mean=-0.000027 rms=0.000873 Jy/beam ! Combined flux in latest and established models = 0.0710833 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 0.0710833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094372Jy sigma=0.000649 ! Fit after self-cal, rms=0.094374Jy sigma=0.000649 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.563 mas, bmaj=8.095 mas, bpa=0.5885 degrees ! Estimated noise=1340.34 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.563 x 8.095 at 0.5885 degrees (North through East) ! Clean map min=-0.0030453 max=0.066985 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.957 mas, bmaj=7.087 mas, bpa=-0.7909 degrees ! Estimated noise=1711.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0514154 Jy ! Component: 100 - total flux cleaned = 0.0638146 Jy ! Component: 150 - total flux cleaned = 0.0687618 Jy ! Component: 200 - total flux cleaned = 0.0711499 Jy ! Total flux subtracted in 200 components = 0.0711499 Jy ! Clean residual min=-0.004376 max=0.004337 Jy/beam ! Clean residual mean=-0.000009 rms=0.001054 Jy/beam ! Combined flux in latest and established models = 0.0711498 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.0711498 Jy ! Inverting map and beam ! Estimated beam: bmin=3.563 mas, bmaj=8.095 mas, bpa=0.5885 degrees ! Estimated noise=1340.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000173442 Jy ! Component: 100 - total flux cleaned = 0.000422998 Jy ! Component: 150 - total flux cleaned = 0.0005217 Jy ! Component: 200 - total flux cleaned = 0.00054942 Jy ! Total flux subtracted in 200 components = 0.00054942 Jy ! Clean residual min=-0.003195 max=0.003083 Jy/beam ! Clean residual mean=-0.000013 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.0716993 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.0716993 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.053 mas, bmaj=11.28 mas, bpa=1.609 degrees ! Estimated noise=1575.28 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000259661 Jy ! Component: 100 - total flux cleaned = -0.000338437 Jy ! Component: 150 - total flux cleaned = -0.000402489 Jy ! Component: 200 - total flux cleaned = -0.000456742 Jy ! Total flux subtracted in 200 components = -0.000456742 Jy ! Clean residual min=-0.003132 max=0.002995 Jy/beam ! Clean residual mean=-0.000027 rms=0.000875 Jy/beam ! Combined flux in latest and established models = 0.0712425 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.70212e-05 Jy ! Component: 100 - total flux cleaned = -8.94742e-05 Jy ! Component: 150 - total flux cleaned = -0.000127173 Jy ! Component: 200 - total flux cleaned = -0.000152629 Jy ! Total flux subtracted in 200 components = -0.000152629 Jy ! Clean residual min=-0.003141 max=0.002989 Jy/beam ! Clean residual mean=-0.000027 rms=0.000872 Jy/beam ! Combined flux in latest and established models = 0.0710899 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 42 components and 0.0710899 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.563 mas, bmaj=8.095 mas, bpa=0.5885 degrees ! Estimated noise=1340.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000417125 Jy ! Component: 100 - total flux cleaned = 0.000442012 Jy ! Component: 150 - total flux cleaned = 0.00046481 Jy ! Component: 200 - total flux cleaned = 0.00044651 Jy ! Total flux subtracted in 200 components = 0.00044651 Jy ! Clean residual min=-0.003145 max=0.002990 Jy/beam ! Clean residual mean=-0.000013 rms=0.000797 Jy/beam ! Combined flux in latest and established models = 0.0715364 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 47 components and 0.0715364 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094380Jy sigma=0.000649 ! Fit after self-cal, rms=0.094386Jy sigma=0.000649 wmodel J0010+1058_S_2017_05_01_pus_map.mod ! Writing 47 model components to file: J0010+1058_S_2017_05_01_pus_map.mod wobs J0010+1058_S_2017_05_01_pus_uvs.fits ! Writing UV FITS file: J0010+1058_S_2017_05_01_pus_uvs.fits wwins J0010+1058_S_2017_05_01_pus_map.win ! wwins: Wrote 1 windows to J0010+1058_S_2017_05_01_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000634533 Jy ! Component: 100 - total flux cleaned = -0.0011221 Jy ! Component: 150 - total flux cleaned = -0.00153826 Jy ! Component: 200 - total flux cleaned = -0.00184138 Jy ! Component: 250 - total flux cleaned = -0.00213635 Jy ! Component: 300 - total flux cleaned = -0.00247334 Jy ! Component: 350 - total flux cleaned = -0.00280309 Jy ! Component: 400 - total flux cleaned = -0.00312641 Jy ! Component: 450 - total flux cleaned = -0.00344393 Jy ! Component: 500 - total flux cleaned = -0.00375587 Jy ! Component: 550 - total flux cleaned = -0.00397542 Jy ! Component: 600 - total flux cleaned = -0.00432036 Jy ! Component: 650 - total flux cleaned = -0.00444785 Jy ! Component: 700 - total flux cleaned = -0.00453129 Jy ! Component: 750 - total flux cleaned = -0.00461431 Jy ! Component: 800 - total flux cleaned = -0.00469638 Jy ! Component: 850 - total flux cleaned = -0.0048168 Jy ! Component: 900 - total flux cleaned = -0.00477736 Jy ! Component: 950 - total flux cleaned = -0.0048956 Jy ! Component: 1000 - total flux cleaned = -0.0050124 Jy ! Component: 1050 - total flux cleaned = -0.00489738 Jy ! Component: 1100 - total flux cleaned = -0.00508796 Jy ! Component: 1150 - total flux cleaned = -0.00508761 Jy ! Component: 1200 - total flux cleaned = -0.00516193 Jy ! Component: 1250 - total flux cleaned = -0.0051996 Jy ! Component: 1300 - total flux cleaned = -0.0053096 Jy ! Component: 1350 - total flux cleaned = -0.00527331 Jy ! Component: 1400 - total flux cleaned = -0.00534552 Jy ! Component: 1450 - total flux cleaned = -0.00541681 Jy ! Component: 1500 - total flux cleaned = -0.00538211 Jy ! Component: 1550 - total flux cleaned = -0.00541721 Jy ! Component: 1600 - total flux cleaned = -0.00548686 Jy ! Component: 1650 - total flux cleaned = -0.0054524 Jy ! Component: 1700 - total flux cleaned = -0.00562315 Jy ! Component: 1750 - total flux cleaned = -0.00555581 Jy ! Component: 1800 - total flux cleaned = -0.00558934 Jy ! Component: 1850 - total flux cleaned = -0.00568942 Jy ! Component: 1900 - total flux cleaned = -0.00559016 Jy ! Component: 1950 - total flux cleaned = -0.00559059 Jy ! Component: 2000 - total flux cleaned = -0.0057531 Jy ! Component: 2050 - total flux cleaned = -0.0058176 Jy ! Component: 2100 - total flux cleaned = -0.0056892 Jy ! Component: 2150 - total flux cleaned = -0.00591191 Jy ! Component: 2200 - total flux cleaned = -0.00597492 Jy ! Component: 2250 - total flux cleaned = -0.00594375 Jy ! Component: 2300 - total flux cleaned = -0.00600601 Jy ! Component: 2350 - total flux cleaned = -0.00603662 Jy ! Component: 2400 - total flux cleaned = -0.0060056 Jy ! Component: 2450 - total flux cleaned = -0.00600566 Jy ! Component: 2500 - total flux cleaned = -0.00600531 Jy ! Component: 2550 - total flux cleaned = -0.00591484 Jy ! Component: 2600 - total flux cleaned = -0.00579523 Jy ! Component: 2650 - total flux cleaned = -0.00585492 Jy ! Component: 2700 - total flux cleaned = -0.00585497 Jy ! Component: 2750 - total flux cleaned = -0.00588441 Jy ! Component: 2800 - total flux cleaned = -0.00585505 Jy ! Component: 2850 - total flux cleaned = -0.00579717 Jy ! Component: 2900 - total flux cleaned = -0.0057685 Jy ! Component: 2950 - total flux cleaned = -0.00571109 Jy ! Component: 3000 - total flux cleaned = -0.00559766 Jy ! Component: 3050 - total flux cleaned = -0.00556932 Jy ! Component: 3100 - total flux cleaned = -0.00556919 Jy ! Component: 3150 - total flux cleaned = -0.00545752 Jy ! Component: 3200 - total flux cleaned = -0.00531884 Jy ! Component: 3250 - total flux cleaned = -0.0053463 Jy ! Component: 3300 - total flux cleaned = -0.005374 Jy ! Component: 3350 - total flux cleaned = -0.00529224 Jy ! Component: 3400 - total flux cleaned = -0.00521056 Jy ! Component: 3450 - total flux cleaned = -0.00510265 Jy ! Component: 3500 - total flux cleaned = -0.00504904 Jy ! Component: 3550 - total flux cleaned = -0.00510215 Jy ! Component: 3600 - total flux cleaned = -0.00496925 Jy ! Component: 3650 - total flux cleaned = -0.00486382 Jy ! Component: 3700 - total flux cleaned = -0.00486379 Jy ! Component: 3750 - total flux cleaned = -0.00475931 Jy ! Component: 3800 - total flux cleaned = -0.00468145 Jy ! Component: 3850 - total flux cleaned = -0.00468167 Jy ! Component: 3900 - total flux cleaned = -0.00460432 Jy ! Component: 3950 - total flux cleaned = -0.00455316 Jy ! Component: 4000 - total flux cleaned = -0.00445098 Jy ! Component: 4050 - total flux cleaned = -0.00445097 Jy ! Total flux subtracted in 4096 components = -0.00435014 Jy ! Clean residual min=-0.001426 max=0.001526 Jy/beam ! Clean residual mean=-0.000000 rms=0.000472 Jy/beam ! Combined flux in latest and established models = 0.0671863 Jy keep ! Adding 307 model components to the UV plane model. ! The established model now contains 354 components and 0.0671863 Jy ![Exited script file: muppet] wmap "J0010+1058_S_2017_05_01_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.563 x 8.095 at 0.5885 degrees (North through East) ! Clean map min=-0.002594 max=0.066937 Jy/beam ! Writing clean map to FITS file: J0010+1058_S_2017_05_01_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0669371 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000471181 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.11175 2.11175 4.2235 8.44699 16.894 33.788 67.576 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.066 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.563 x 8.095 at 0.5885 degrees (North through East) ! Clean map min=-0.002594 max=0.066937 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010+1058_S_2017_05_01_pus_uvs.log closed on Wed May 1 18:21:12 2019