! Started logfile: J0010+1058_S_2017_04_28_pus_uvs.log on Thu May 2 16:12:11 2019 obs J0010+1058_S_2017_04_28_pus_uva.fits ! Reading UV FITS file: J0010+1058_S_2017_04_28_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.788889 visibilities/baseline/integration-bin. ! Found source: J0010+1058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 671 lines of history. ! ! Reading 3408 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010+1058_S_2017_04_28_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 122 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.984914Jy sigma=0.043173 ! Fit after self-cal, rms=0.949285Jy sigma=0.043126 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.075 mas, bmaj=7.92 mas, bpa=-4.939 degrees ! Estimated noise=1234.55 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329055 Jy ! Component: 100 - total flux cleaned = 0.0405618 Jy ! Total flux subtracted in 100 components = 0.0405618 Jy ! Clean residual min=-0.017302 max=0.015613 Jy/beam ! Clean residual mean=-0.000050 rms=0.005270 Jy/beam ! Combined flux in latest and established models = 0.0405618 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0405618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210860Jy sigma=0.001782 ! Fit after self-cal, rms=0.210813Jy sigma=0.001765 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.794 mas, bmaj=8.818 mas, bpa=-1.902 degrees ! Estimated noise=1058.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000176942 Jy ! Component: 100 - total flux cleaned = -0.00129644 Jy ! Component: 150 - total flux cleaned = -0.00213347 Jy ! Component: 200 - total flux cleaned = -0.00295464 Jy ! Total flux subtracted in 200 components = -0.00295464 Jy ! Clean residual min=-0.016988 max=0.014371 Jy/beam ! Clean residual mean=-0.000155 rms=0.004681 Jy/beam ! Combined flux in latest and established models = 0.0376072 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.0376072 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210384Jy sigma=0.001779 ! Fit after self-cal, rms=0.210358Jy sigma=0.001779 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.73 FD 0.88 HN 0.78 KP 0.81 ! LA 0.78 MK 0.87 NL 0.77 OV 0.79 ! PT 0.77 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 0.78 HN 0.80 KP 0.79 ! LA 0.75 MK 0.79 NL 0.79 OV 0.81 ! PT 0.76 SC 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 0.77 HN 0.80 KP 0.71 ! LA 0.77 MK 0.87 NL 0.76 OV 0.80 ! PT 0.70 SC 1.06 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 0.76 HN 0.80 KP 1.00* ! LA 25.83 MK 1.00 NL 1.00* OV 1.00* ! PT 0.98 SC 1.00* ! ! ! Fit before self-cal, rms=0.210358Jy sigma=0.001779 ! Fit after self-cal, rms=5.014643Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.592 mas, bmaj=8.308 mas, bpa=0.1277 degrees ! Estimated noise=1068.85 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189322 Jy ! Component: 100 - total flux cleaned = 0.00276039 Jy ! Component: 150 - total flux cleaned = 0.00302033 Jy ! Component: 200 - total flux cleaned = 0.00312799 Jy ! Total flux subtracted in 200 components = 0.00312799 Jy ! Clean residual min=-0.002986 max=0.003831 Jy/beam ! Clean residual mean=-0.000010 rms=0.000754 Jy/beam ! Combined flux in latest and established models = 0.0407352 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 34 components and 0.0407352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.014577Jy sigma=0.000661 ! Fit after self-cal, rms=5.014557Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=5.014557Jy sigma=0.000656 ! Fit after self-cal, rms=0.059558Jy sigma=0.000646 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.613 mas, bmaj=8.33 mas, bpa=-0.5118 degrees ! Estimated noise=1053.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000562205 Jy ! Component: 100 - total flux cleaned = 0.000681508 Jy ! Component: 150 - total flux cleaned = 0.000700891 Jy ! Component: 200 - total flux cleaned = 0.000718931 Jy ! Total flux subtracted in 200 components = 0.000718931 Jy ! Clean residual min=-0.002358 max=0.002997 Jy/beam ! Clean residual mean=0.000005 rms=0.000654 Jy/beam ! Combined flux in latest and established models = 0.0414541 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 40 components and 0.0414541 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059539Jy sigma=0.000646 ! Fit after self-cal, rms=0.059458Jy sigma=0.000644 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (39.5, 84). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00263799 Jy ! Component: 100 - total flux cleaned = 0.00317433 Jy ! Component: 150 - total flux cleaned = 0.00329777 Jy ! Component: 200 - total flux cleaned = 0.00340291 Jy ! Total flux subtracted in 200 components = 0.00340291 Jy ! Clean residual min=-0.002236 max=0.002569 Jy/beam ! Clean residual mean=0.000003 rms=0.000625 Jy/beam ! Combined flux in latest and established models = 0.044857 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.044857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059310Jy sigma=0.000643 ! Fit after self-cal, rms=0.059251Jy sigma=0.000642 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059251Jy sigma=0.000642 ! Fit after self-cal, rms=0.058967Jy sigma=0.000642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.606 mas, bmaj=8.318 mas, bpa=-0.5676 degrees ! Estimated noise=1048.07 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141191 Jy ! Component: 100 - total flux cleaned = 0.00169428 Jy ! Component: 150 - total flux cleaned = 0.00184782 Jy ! Component: 200 - total flux cleaned = 0.00198432 Jy ! Total flux subtracted in 200 components = 0.00198432 Jy ! Clean residual min=-0.002210 max=0.002509 Jy/beam ! Clean residual mean=0.000006 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.0468413 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.0468413 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058912Jy sigma=0.000642 ! Fit after self-cal, rms=0.058902Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693982 Jy ! Component: 100 - total flux cleaned = 0.00077193 Jy ! Component: 150 - total flux cleaned = 0.000796367 Jy ! Component: 200 - total flux cleaned = 0.000884371 Jy ! Total flux subtracted in 200 components = 0.000884371 Jy ! Clean residual min=-0.002212 max=0.002522 Jy/beam ! Clean residual mean=0.000006 rms=0.000606 Jy/beam ! Combined flux in latest and established models = 0.0477257 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 75 components and 0.0477257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058876Jy sigma=0.000641 ! Fit after self-cal, rms=0.058873Jy sigma=0.000641 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058873Jy sigma=0.000641 ! Fit after self-cal, rms=0.059150Jy sigma=0.000641 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.869 mas, bmaj=11.28 mas, bpa=1.727 degrees ! Estimated noise=1240.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102378 Jy ! Component: 100 - total flux cleaned = 0.00125969 Jy ! Component: 150 - total flux cleaned = 0.00129768 Jy ! Component: 200 - total flux cleaned = 0.00134993 Jy ! Total flux subtracted in 200 components = 0.00134993 Jy ! Clean residual min=-0.002313 max=0.002740 Jy/beam ! Clean residual mean=0.000012 rms=0.000727 Jy/beam ! Combined flux in latest and established models = 0.0490756 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 0.0490757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059148Jy sigma=0.000641 ! Fit after self-cal, rms=0.059133Jy sigma=0.000641 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000357015 Jy ! Component: 100 - total flux cleaned = 0.00041058 Jy ! Component: 150 - total flux cleaned = 0.000408967 Jy ! Component: 200 - total flux cleaned = 0.000422229 Jy ! Total flux subtracted in 200 components = 0.000422229 Jy ! Clean residual min=-0.002356 max=0.002703 Jy/beam ! Clean residual mean=0.000013 rms=0.000723 Jy/beam ! Combined flux in latest and established models = 0.0494979 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 106 components and 0.0494979 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059134Jy sigma=0.000641 ! Fit after self-cal, rms=0.059124Jy sigma=0.000641 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=8.302 mas, bpa=-0.6198 degrees ! Estimated noise=1050.38 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.595 x 8.302 at -0.6198 degrees (North through East) ! Clean map min=-0.0021721 max=0.043847 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.991 mas, bmaj=7.569 mas, bpa=-2.931 degrees ! Estimated noise=1258.29 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0340566 Jy ! Component: 100 - total flux cleaned = 0.0423368 Jy ! Component: 150 - total flux cleaned = 0.0466406 Jy ! Component: 200 - total flux cleaned = 0.0481012 Jy ! Total flux subtracted in 200 components = 0.0481012 Jy ! Clean residual min=-0.003172 max=0.003046 Jy/beam ! Clean residual mean=0.000001 rms=0.000786 Jy/beam ! Combined flux in latest and established models = 0.0481012 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.0481012 Jy ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=8.302 mas, bpa=-0.6198 degrees ! Estimated noise=1050.38 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139162 Jy ! Component: 100 - total flux cleaned = 0.00159269 Jy ! Component: 150 - total flux cleaned = 0.00159418 Jy ! Component: 200 - total flux cleaned = 0.00149661 Jy ! Total flux subtracted in 200 components = 0.00149661 Jy ! Clean residual min=-0.002290 max=0.002542 Jy/beam ! Clean residual mean=0.000007 rms=0.000623 Jy/beam ! Combined flux in latest and established models = 0.0495978 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 32 components and 0.0495978 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.869 mas, bmaj=11.28 mas, bpa=1.727 degrees ! Estimated noise=1240.59 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000492458 Jy ! Component: 100 - total flux cleaned = 0.000462445 Jy ! Component: 150 - total flux cleaned = 0.000436806 Jy ! Component: 200 - total flux cleaned = 0.000361704 Jy ! Total flux subtracted in 200 components = 0.000361704 Jy ! Clean residual min=-0.002451 max=0.002658 Jy/beam ! Clean residual mean=0.000014 rms=0.000729 Jy/beam ! Combined flux in latest and established models = 0.0499595 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.44735e-05 Jy ! Component: 100 - total flux cleaned = -0.000103366 Jy ! Component: 150 - total flux cleaned = -0.000155748 Jy ! Component: 200 - total flux cleaned = -0.000203591 Jy ! Total flux subtracted in 200 components = -0.000203591 Jy ! Clean residual min=-0.002420 max=0.002629 Jy/beam ! Clean residual mean=0.000014 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.0497559 Jy ! Adding 27 model components to the UV plane model. ! The established model now contains 57 components and 0.0497559 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.595 mas, bmaj=8.302 mas, bpa=-0.6198 degrees ! Estimated noise=1050.38 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000384544 Jy ! Component: 100 - total flux cleaned = 0.000387077 Jy ! Component: 150 - total flux cleaned = 0.000219036 Jy ! Component: 200 - total flux cleaned = 9.70121e-05 Jy ! Total flux subtracted in 200 components = 9.70121e-05 Jy ! Clean residual min=-0.002308 max=0.002515 Jy/beam ! Clean residual mean=0.000008 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.0498529 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 68 components and 0.0498529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059146Jy sigma=0.000641 ! Fit after self-cal, rms=0.059147Jy sigma=0.000641 wmodel J0010+1058_S_2017_04_28_pus_map.mod ! Writing 68 model components to file: J0010+1058_S_2017_04_28_pus_map.mod wobs J0010+1058_S_2017_04_28_pus_uvs.fits ! Writing UV FITS file: J0010+1058_S_2017_04_28_pus_uvs.fits wwins J0010+1058_S_2017_04_28_pus_map.win ! wwins: Wrote 2 windows to J0010+1058_S_2017_04_28_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000454917 Jy ! Component: 100 - total flux cleaned = 0.000578793 Jy ! Component: 150 - total flux cleaned = 0.000736295 Jy ! Component: 200 - total flux cleaned = 0.000887981 Jy ! Component: 250 - total flux cleaned = 0.00110871 Jy ! Component: 300 - total flux cleaned = 0.00114511 Jy ! Component: 350 - total flux cleaned = 0.00104132 Jy ! Component: 400 - total flux cleaned = 0.001007 Jy ! Component: 450 - total flux cleaned = 0.000838844 Jy ! Component: 500 - total flux cleaned = 0.00077233 Jy ! Component: 550 - total flux cleaned = 0.000609495 Jy ! Component: 600 - total flux cleaned = 0.000514008 Jy ! Component: 650 - total flux cleaned = 0.000419874 Jy ! Component: 700 - total flux cleaned = 0.000357827 Jy ! Component: 750 - total flux cleaned = 0.000266027 Jy ! Component: 800 - total flux cleaned = 0.000145324 Jy ! Component: 850 - total flux cleaned = 0.000115793 Jy ! Component: 900 - total flux cleaned = 2.8126e-05 Jy ! Component: 950 - total flux cleaned = 2.79867e-05 Jy ! Component: 1000 - total flux cleaned = -5.73188e-05 Jy ! Component: 1050 - total flux cleaned = -0.000141096 Jy ! Component: 1100 - total flux cleaned = -0.000113518 Jy ! Component: 1150 - total flux cleaned = -0.000196047 Jy ! Component: 1200 - total flux cleaned = -0.000250176 Jy ! Component: 1250 - total flux cleaned = -0.000357427 Jy ! Component: 1300 - total flux cleaned = -0.000357149 Jy ! Component: 1350 - total flux cleaned = -0.000383161 Jy ! Component: 1400 - total flux cleaned = -0.000435023 Jy ! Component: 1450 - total flux cleaned = -0.000461044 Jy ! Component: 1500 - total flux cleaned = -0.00048671 Jy ! Component: 1550 - total flux cleaned = -0.000537274 Jy ! Component: 1600 - total flux cleaned = -0.000512756 Jy ! Component: 1650 - total flux cleaned = -0.000660706 Jy ! Component: 1700 - total flux cleaned = -0.000660632 Jy ! Component: 1750 - total flux cleaned = -0.000636475 Jy ! Component: 1800 - total flux cleaned = -0.000684589 Jy ! Component: 1850 - total flux cleaned = -0.000660934 Jy ! Component: 1900 - total flux cleaned = -0.000708349 Jy ! Component: 1950 - total flux cleaned = -0.000591848 Jy ! Component: 2000 - total flux cleaned = -0.000638789 Jy ! Component: 2050 - total flux cleaned = -0.000684541 Jy ! Component: 2100 - total flux cleaned = -0.000639112 Jy ! Component: 2150 - total flux cleaned = -0.00063924 Jy ! Component: 2200 - total flux cleaned = -0.00057224 Jy ! Component: 2250 - total flux cleaned = -0.000527654 Jy ! Component: 2300 - total flux cleaned = -0.000505718 Jy ! Component: 2350 - total flux cleaned = -0.000549893 Jy ! Component: 2400 - total flux cleaned = -0.000549623 Jy ! Component: 2450 - total flux cleaned = -0.000571011 Jy ! Component: 2500 - total flux cleaned = -0.000421983 Jy ! Component: 2550 - total flux cleaned = -0.000485365 Jy ! Component: 2600 - total flux cleaned = -0.000401591 Jy ! Component: 2650 - total flux cleaned = -0.000463926 Jy ! Component: 2700 - total flux cleaned = -0.000443426 Jy ! Component: 2750 - total flux cleaned = -0.000402437 Jy ! Component: 2800 - total flux cleaned = -0.000443183 Jy ! Component: 2850 - total flux cleaned = -0.00036231 Jy ! Component: 2900 - total flux cleaned = -0.00040259 Jy ! Component: 2950 - total flux cleaned = -0.000422283 Jy ! Component: 3000 - total flux cleaned = -0.000402636 Jy ! Component: 3050 - total flux cleaned = -0.000363403 Jy ! Component: 3100 - total flux cleaned = -0.000461074 Jy ! Component: 3150 - total flux cleaned = -0.000383398 Jy ! Component: 3200 - total flux cleaned = -0.000364172 Jy ! Component: 3250 - total flux cleaned = -0.000325937 Jy ! Component: 3300 - total flux cleaned = -0.000268747 Jy ! Component: 3350 - total flux cleaned = -0.00030659 Jy ! Component: 3400 - total flux cleaned = -0.000250074 Jy ! Component: 3450 - total flux cleaned = -0.00021251 Jy ! Component: 3500 - total flux cleaned = -0.000175317 Jy ! Component: 3550 - total flux cleaned = -0.000120026 Jy ! Component: 3600 - total flux cleaned = -0.000138582 Jy ! Component: 3650 - total flux cleaned = -1.09599e-05 Jy ! Component: 3700 - total flux cleaned = -6.54493e-05 Jy ! Component: 3750 - total flux cleaned = -6.539e-05 Jy ! Component: 3800 - total flux cleaned = 4.24779e-05 Jy ! Component: 3850 - total flux cleaned = 6.04574e-05 Jy ! Component: 3900 - total flux cleaned = 0.000113746 Jy ! Component: 3950 - total flux cleaned = 0.000166598 Jy ! Component: 4000 - total flux cleaned = 0.000166568 Jy ! Component: 4050 - total flux cleaned = 0.000271341 Jy ! Total flux subtracted in 4096 components = 0.000306155 Jy ! Clean residual min=-0.001079 max=0.001300 Jy/beam ! Clean residual mean=0.000005 rms=0.000325 Jy/beam ! Combined flux in latest and established models = 0.0501591 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 362 components and 0.0501591 Jy ![Exited script file: muppet] wmap "J0010+1058_S_2017_04_28_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.595 x 8.302 at -0.6198 degrees (North through East) ! Clean map min=-0.0020724 max=0.042862 Jy/beam ! Writing clean map to FITS file: J0010+1058_S_2017_04_28_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0428618 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000320647 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.24429 2.24429 4.48857 8.97715 17.9543 35.9086 71.8172 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.042 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.595 x 8.302 at -0.6198 degrees (North through East) ! Clean map min=-0.0020724 max=0.042862 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010+1058_S_2017_04_28_pus_uvs.log closed on Thu May 2 16:12:16 2019