! Started logfile: J0010+1058_S_2017_03_23_pus_uvs.log on Mon May 13 09:43:55 2019 obs J0010+1058_S_2017_03_23_pus_uva.fits ! Reading UV FITS file: J0010+1058_S_2017_03_23_pus_uva.fits ! AN table 1: 24 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.797222 visibilities/baseline/integration-bin. ! Found source: J0010+1058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 481 lines of history. ! ! Reading 3444 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010+1058_S_2017_03_23_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 95 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002545Jy sigma=0.008382 ! Fit after self-cal, rms=0.939441Jy sigma=0.007863 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.76 mas, bmaj=6.88 mas, bpa=-4.6 degrees ! Estimated noise=1842.51 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0485022 Jy ! Component: 100 - total flux cleaned = 0.0591355 Jy ! Total flux subtracted in 100 components = 0.0591355 Jy ! Clean residual min=-0.005490 max=0.005542 Jy/beam ! Clean residual mean=-0.000004 rms=0.001297 Jy/beam ! Combined flux in latest and established models = 0.0591355 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0591355 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086319Jy sigma=0.000673 ! Fit after self-cal, rms=0.085384Jy sigma=0.000666 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.3 mas, bmaj=7.557 mas, bpa=-3.165 degrees ! Estimated noise=1568.12 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0058032 Jy ! Component: 100 - total flux cleaned = 0.00842552 Jy ! Component: 150 - total flux cleaned = 0.0092906 Jy ! Component: 200 - total flux cleaned = 0.00968031 Jy ! Total flux subtracted in 200 components = 0.00968031 Jy ! Clean residual min=-0.004711 max=0.005292 Jy/beam ! Clean residual mean=-0.000003 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.0688158 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 28 components and 0.0688158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084968Jy sigma=0.000663 ! Fit after self-cal, rms=0.084970Jy sigma=0.000663 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 1.13 KP 0.98 ! LA 1.06 MK 0.87 NL 0.94 OV 1.15 ! PT 0.98 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.87 FD 1.09 HN 1.01 KP 1.01 ! LA 0.99 MK 0.94 NL 1.07 OV 1.16 ! PT 0.98 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.92 HN 1.04 KP 1.05 ! LA 0.79 MK 1.07 NL 1.04 OV 0.98 ! PT 0.93 SC 1.00 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.19 HN 0.92 KP 1.00* ! LA 0.75 MK 1.20 NL 1.00* OV 1.11 ! PT 0.94 SC 1.00* ! ! ! Fit before self-cal, rms=0.084970Jy sigma=0.000663 ! Fit after self-cal, rms=0.083276Jy sigma=0.000659 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.31 mas, bmaj=7.568 mas, bpa=-3.243 degrees ! Estimated noise=1558.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.55439e-05 Jy ! Component: 100 - total flux cleaned = -9.45148e-05 Jy ! Component: 150 - total flux cleaned = -0.000153367 Jy ! Component: 200 - total flux cleaned = -0.000179701 Jy ! Total flux subtracted in 200 components = -0.000179701 Jy ! Clean residual min=-0.004166 max=0.004954 Jy/beam ! Clean residual mean=-0.000005 rms=0.001038 Jy/beam ! Combined flux in latest and established models = 0.0686361 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 37 components and 0.0686361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083252Jy sigma=0.000659 ! Fit after self-cal, rms=0.083283Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083283Jy sigma=0.000659 ! Fit after self-cal, rms=0.084999Jy sigma=0.000654 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=7.607 mas, bpa=-3.248 degrees ! Estimated noise=1560.65 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.40677e-05 Jy ! Component: 100 - total flux cleaned = -9.61313e-05 Jy ! Component: 150 - total flux cleaned = -0.000123478 Jy ! Component: 200 - total flux cleaned = -9.7826e-05 Jy ! Total flux subtracted in 200 components = -9.7826e-05 Jy ! Clean residual min=-0.003971 max=0.004631 Jy/beam ! Clean residual mean=0.000002 rms=0.000990 Jy/beam ! Combined flux in latest and established models = 0.0685383 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.0685383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084973Jy sigma=0.000654 ! Fit after self-cal, rms=0.085115Jy sigma=0.000654 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (88.5, -47). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00392102 Jy ! Component: 100 - total flux cleaned = 0.00469644 Jy ! Component: 150 - total flux cleaned = 0.00516854 Jy ! Component: 200 - total flux cleaned = 0.00562103 Jy ! Total flux subtracted in 200 components = 0.00562103 Jy ! Clean residual min=-0.004149 max=0.003975 Jy/beam ! Clean residual mean=0.000002 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.0741593 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.0741593 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084893Jy sigma=0.000652 ! Fit after self-cal, rms=0.084826Jy sigma=0.000651 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084826Jy sigma=0.000651 ! Fit after self-cal, rms=0.084551Jy sigma=0.000651 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.313 mas, bmaj=7.596 mas, bpa=-3.073 degrees ! Estimated noise=1538.88 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137243 Jy ! Component: 100 - total flux cleaned = 0.00166701 Jy ! Component: 150 - total flux cleaned = 0.00172089 Jy ! Component: 200 - total flux cleaned = 0.00172105 Jy ! Total flux subtracted in 200 components = 0.00172105 Jy ! Clean residual min=-0.003811 max=0.003934 Jy/beam ! Clean residual mean=0.000004 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.0758804 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.0758804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084473Jy sigma=0.000650 ! Fit after self-cal, rms=0.084501Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000223171 Jy ! Component: 100 - total flux cleaned = 0.000266007 Jy ! Component: 150 - total flux cleaned = 0.000223871 Jy ! Component: 200 - total flux cleaned = 0.000222741 Jy ! Total flux subtracted in 200 components = 0.000222741 Jy ! Clean residual min=-0.003802 max=0.003964 Jy/beam ! Clean residual mean=0.000005 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.0761031 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 65 components and 0.0761031 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084454Jy sigma=0.000650 ! Fit after self-cal, rms=0.084452Jy sigma=0.000650 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084452Jy sigma=0.000650 ! Fit after self-cal, rms=0.084302Jy sigma=0.000650 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.448 mas, bmaj=11.03 mas, bpa=0.1019 degrees ! Estimated noise=1903.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000883894 Jy ! Component: 100 - total flux cleaned = 0.000638278 Jy ! Component: 150 - total flux cleaned = 0.000596778 Jy ! Component: 200 - total flux cleaned = 0.000631268 Jy ! Total flux subtracted in 200 components = 0.000631268 Jy ! Clean residual min=-0.004211 max=0.004492 Jy/beam ! Clean residual mean=0.000014 rms=0.001114 Jy/beam ! Combined flux in latest and established models = 0.0767344 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 77 components and 0.0767344 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084282Jy sigma=0.000650 ! Fit after self-cal, rms=0.084289Jy sigma=0.000650 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000189343 Jy ! Component: 100 - total flux cleaned = 0.000222865 Jy ! Component: 150 - total flux cleaned = 0.000315092 Jy ! Component: 200 - total flux cleaned = 0.000370051 Jy ! Total flux subtracted in 200 components = 0.000370051 Jy ! Clean residual min=-0.004206 max=0.004429 Jy/beam ! Clean residual mean=0.000015 rms=0.001108 Jy/beam ! Combined flux in latest and established models = 0.0771044 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 81 components and 0.0771044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084286Jy sigma=0.000650 ! Fit after self-cal, rms=0.084288Jy sigma=0.000650 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=7.598 mas, bpa=-3.025 degrees ! Estimated noise=1533.34 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 7.598 at -3.025 degrees (North through East) ! Clean map min=-0.0036062 max=0.064144 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.765 mas, bmaj=6.931 mas, bpa=-4.365 degrees ! Estimated noise=1813.99 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0481464 Jy ! Component: 100 - total flux cleaned = 0.0596884 Jy ! Component: 150 - total flux cleaned = 0.0638734 Jy ! Component: 200 - total flux cleaned = 0.0668379 Jy ! Total flux subtracted in 200 components = 0.0668379 Jy ! Clean residual min=-0.005095 max=0.004658 Jy/beam ! Clean residual mean=-0.000004 rms=0.001150 Jy/beam ! Combined flux in latest and established models = 0.0668379 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0668379 Jy ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=7.598 mas, bpa=-3.025 degrees ! Estimated noise=1533.34 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00416883 Jy ! Component: 100 - total flux cleaned = 0.00644703 Jy ! Component: 150 - total flux cleaned = 0.00729114 Jy ! Component: 200 - total flux cleaned = 0.00780983 Jy ! Total flux subtracted in 200 components = 0.00780983 Jy ! Clean residual min=-0.004072 max=0.003724 Jy/beam ! Clean residual mean=0.000004 rms=0.000959 Jy/beam ! Combined flux in latest and established models = 0.0746477 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 31 components and 0.0746477 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.448 mas, bmaj=11.03 mas, bpa=0.1019 degrees ! Estimated noise=1903.36 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00199549 Jy ! Component: 100 - total flux cleaned = 0.00254538 Jy ! Component: 150 - total flux cleaned = 0.00282474 Jy ! Component: 200 - total flux cleaned = 0.00292202 Jy ! Total flux subtracted in 200 components = 0.00292202 Jy ! Clean residual min=-0.004271 max=0.004342 Jy/beam ! Clean residual mean=0.000013 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.0775697 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.54605e-05 Jy ! Component: 100 - total flux cleaned = 8.44266e-05 Jy ! Component: 150 - total flux cleaned = 8.46247e-05 Jy ! Component: 200 - total flux cleaned = 8.38934e-05 Jy ! Total flux subtracted in 200 components = 8.38934e-05 Jy ! Clean residual min=-0.004221 max=0.004328 Jy/beam ! Clean residual mean=0.000014 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 0.0776536 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 59 components and 0.0776536 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.312 mas, bmaj=7.598 mas, bpa=-3.025 degrees ! Estimated noise=1533.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000168102 Jy ! Component: 100 - total flux cleaned = -0.000337872 Jy ! Component: 150 - total flux cleaned = -0.000544313 Jy ! Component: 200 - total flux cleaned = -0.000687364 Jy ! Total flux subtracted in 200 components = -0.000687364 Jy ! Clean residual min=-0.003806 max=0.003957 Jy/beam ! Clean residual mean=0.000005 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.0769662 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 75 components and 0.0769662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084352Jy sigma=0.000650 ! Fit after self-cal, rms=0.084358Jy sigma=0.000650 wmodel J0010+1058_S_2017_03_23_pus_map.mod ! Writing 75 model components to file: J0010+1058_S_2017_03_23_pus_map.mod wobs J0010+1058_S_2017_03_23_pus_uvs.fits ! Writing UV FITS file: J0010+1058_S_2017_03_23_pus_uvs.fits wwins J0010+1058_S_2017_03_23_pus_map.win ! wwins: Wrote 2 windows to J0010+1058_S_2017_03_23_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000124555 Jy ! Component: 100 - total flux cleaned = -0.000850591 Jy ! Component: 150 - total flux cleaned = -0.00122567 Jy ! Component: 200 - total flux cleaned = -0.00152456 Jy ! Component: 250 - total flux cleaned = -0.00163944 Jy ! Component: 300 - total flux cleaned = -0.00164091 Jy ! Component: 350 - total flux cleaned = -0.00153329 Jy ! Component: 400 - total flux cleaned = -0.00137412 Jy ! Component: 450 - total flux cleaned = -0.00116445 Jy ! Component: 500 - total flux cleaned = -0.000957884 Jy ! Component: 550 - total flux cleaned = -0.000755179 Jy ! Component: 600 - total flux cleaned = -0.000507126 Jy ! Component: 650 - total flux cleaned = -0.000410442 Jy ! Component: 700 - total flux cleaned = -0.000314982 Jy ! Component: 750 - total flux cleaned = -0.000220524 Jy ! Component: 800 - total flux cleaned = -0.00012682 Jy ! Component: 850 - total flux cleaned = -3.54539e-05 Jy ! Component: 900 - total flux cleaned = 9.99916e-05 Jy ! Component: 950 - total flux cleaned = 9.99979e-05 Jy ! Component: 1000 - total flux cleaned = 0.000231927 Jy ! Component: 1050 - total flux cleaned = 0.000404925 Jy ! Component: 1100 - total flux cleaned = 0.00048945 Jy ! Component: 1150 - total flux cleaned = 0.00057437 Jy ! Component: 1200 - total flux cleaned = 0.000783631 Jy ! Component: 1250 - total flux cleaned = 0.000866301 Jy ! Component: 1300 - total flux cleaned = 0.00115307 Jy ! Component: 1350 - total flux cleaned = 0.00123339 Jy ! Component: 1400 - total flux cleaned = 0.00139371 Jy ! Component: 1450 - total flux cleaned = 0.00147296 Jy ! Component: 1500 - total flux cleaned = 0.00162977 Jy ! Component: 1550 - total flux cleaned = 0.00170755 Jy ! Component: 1600 - total flux cleaned = 0.00193728 Jy ! Component: 1650 - total flux cleaned = 0.00197538 Jy ! Component: 1700 - total flux cleaned = 0.00201304 Jy ! Component: 1750 - total flux cleaned = 0.0021621 Jy ! Component: 1800 - total flux cleaned = 0.00219846 Jy ! Component: 1850 - total flux cleaned = 0.00216177 Jy ! Component: 1900 - total flux cleaned = 0.00227004 Jy ! Component: 1950 - total flux cleaned = 0.0021263 Jy ! Component: 2000 - total flux cleaned = 0.00209136 Jy ! Component: 2050 - total flux cleaned = 0.00219776 Jy ! Component: 2100 - total flux cleaned = 0.00223277 Jy ! Component: 2150 - total flux cleaned = 0.00226794 Jy ! Component: 2200 - total flux cleaned = 0.00237115 Jy ! Component: 2250 - total flux cleaned = 0.00237114 Jy ! Component: 2300 - total flux cleaned = 0.00230302 Jy ! Component: 2350 - total flux cleaned = 0.00233714 Jy ! Component: 2400 - total flux cleaned = 0.00250457 Jy ! Component: 2450 - total flux cleaned = 0.00253734 Jy ! Component: 2500 - total flux cleaned = 0.0024715 Jy ! Component: 2550 - total flux cleaned = 0.00257028 Jy ! Component: 2600 - total flux cleaned = 0.00257012 Jy ! Component: 2650 - total flux cleaned = 0.00263481 Jy ! Component: 2700 - total flux cleaned = 0.00263503 Jy ! Component: 2750 - total flux cleaned = 0.00253946 Jy ! Component: 2800 - total flux cleaned = 0.00253975 Jy ! Component: 2850 - total flux cleaned = 0.00257092 Jy ! Component: 2900 - total flux cleaned = 0.00253932 Jy ! Component: 2950 - total flux cleaned = 0.00238441 Jy ! Component: 3000 - total flux cleaned = 0.00244602 Jy ! Component: 3050 - total flux cleaned = 0.00223123 Jy ! Component: 3100 - total flux cleaned = 0.00207873 Jy ! Component: 3150 - total flux cleaned = 0.00204825 Jy ! Component: 3200 - total flux cleaned = 0.00201799 Jy ! Component: 3250 - total flux cleaned = 0.00183817 Jy ! Component: 3300 - total flux cleaned = 0.00180846 Jy ! Component: 3350 - total flux cleaned = 0.0016604 Jy ! Component: 3400 - total flux cleaned = 0.00154261 Jy ! Component: 3450 - total flux cleaned = 0.00157169 Jy ! Component: 3500 - total flux cleaned = 0.00133888 Jy ! Component: 3550 - total flux cleaned = 0.00125223 Jy ! Component: 3600 - total flux cleaned = 0.00116574 Jy ! Component: 3650 - total flux cleaned = 0.00105115 Jy ! Component: 3700 - total flux cleaned = 0.000909129 Jy ! Component: 3750 - total flux cleaned = 0.000909283 Jy ! Component: 3800 - total flux cleaned = 0.000881046 Jy ! Component: 3850 - total flux cleaned = 0.000853111 Jy ! Component: 3900 - total flux cleaned = 0.000657932 Jy ! Component: 3950 - total flux cleaned = 0.000546844 Jy ! Component: 4000 - total flux cleaned = 0.000684609 Jy ! Component: 4050 - total flux cleaned = 0.000410117 Jy ! Total flux subtracted in 4096 components = 0.000382797 Jy ! Clean residual min=-0.001761 max=0.001555 Jy/beam ! Clean residual mean=0.000000 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.077349 Jy keep ! Adding 328 model components to the UV plane model. ! The established model now contains 403 components and 0.0773491 Jy ![Exited script file: muppet] wmap "J0010+1058_S_2017_03_23_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 7.598 at -3.025 degrees (North through East) ! Clean map min=-0.0029765 max=0.063527 Jy/beam ! Writing clean map to FITS file: J0010+1058_S_2017_03_23_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0635272 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000504712 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.38344 2.38344 4.76688 9.53377 19.0675 38.1351 76.2701 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.063 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.312 x 7.598 at -3.025 degrees (North through East) ! Clean map min=-0.0029765 max=0.063527 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010+1058_S_2017_03_23_pus_uvs.log closed on Mon May 13 09:44:01 2019