! Started logfile: J0010+1058_S_2017_01_21_pus_uvs.log on Sun May 5 15:42:34 2019 obs J0010+1058_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0010+1058_S_2017_01_21_pus_uva.fits ! AN table 1: 8 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.618056 visibilities/baseline/integration-bin. ! Found source: J0010+1058 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 712 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0010+1058_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.001339Jy sigma=0.007221 ! Fit after self-cal, rms=0.934434Jy sigma=0.006794 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.899 mas, bmaj=6.846 mas, bpa=13.33 degrees ! Estimated noise=5187.1 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0525852 Jy ! Component: 100 - total flux cleaned = 0.0665369 Jy ! Total flux subtracted in 100 components = 0.0665369 Jy ! Clean residual min=-0.012310 max=0.011533 Jy/beam ! Clean residual mean=0.000000 rms=0.003033 Jy/beam ! Combined flux in latest and established models = 0.0665369 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0665369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116429Jy sigma=0.000596 ! Fit after self-cal, rms=0.116019Jy sigma=0.000592 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=8.112 mas, bpa=15.2 degrees ! Estimated noise=4522.52 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00661865 Jy ! Component: 100 - total flux cleaned = 0.00870574 Jy ! Component: 150 - total flux cleaned = 0.00895353 Jy ! Component: 200 - total flux cleaned = 0.00925499 Jy ! Total flux subtracted in 200 components = 0.00925499 Jy ! Clean residual min=-0.011313 max=0.010692 Jy/beam ! Clean residual mean=-0.000031 rms=0.002664 Jy/beam ! Combined flux in latest and established models = 0.0757919 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 26 components and 0.0757919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115202Jy sigma=0.000591 ! Fit after self-cal, rms=0.115224Jy sigma=0.000590 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 1.00* HN 1.10 LA 1.08 ! MK 1.00* NL 0.97 OV 0.65 PT 1.26 ! SC 1.16 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.00* HN 1.00 LA 1.03 ! MK 1.00* NL 0.95 OV 1.40 PT 1.24 ! SC 0.92 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.17 FD 1.00* HN 0.88 LA 0.91 ! MK 1.00* NL 0.99 OV 0.74 PT 1.21 ! SC 1.03 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 1.00* HN 1.04 LA 0.61 ! MK 0.87 NL 1.00* OV 0.89 PT 1.14 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.115224Jy sigma=0.000590 ! Fit after self-cal, rms=0.102946Jy sigma=0.000581 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.887 mas, bpa=14.13 degrees ! Estimated noise=4437.53 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000779364 Jy ! Component: 100 - total flux cleaned = -0.000798191 Jy ! Component: 150 - total flux cleaned = -0.00055339 Jy ! Component: 200 - total flux cleaned = -0.000502029 Jy ! Total flux subtracted in 200 components = -0.000502029 Jy ! Clean residual min=-0.009122 max=0.009994 Jy/beam ! Clean residual mean=-0.000011 rms=0.002330 Jy/beam ! Combined flux in latest and established models = 0.0752899 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.0752898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102755Jy sigma=0.000581 ! Fit after self-cal, rms=0.102560Jy sigma=0.000578 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102560Jy sigma=0.000578 ! Fit after self-cal, rms=0.102416Jy sigma=0.000578 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.311 mas, bmaj=7.839 mas, bpa=13.97 degrees ! Estimated noise=4404.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000853215 Jy ! Component: 100 - total flux cleaned = -0.000864738 Jy ! Component: 150 - total flux cleaned = -0.000913226 Jy ! Component: 200 - total flux cleaned = -0.000912377 Jy ! Total flux subtracted in 200 components = -0.000912377 Jy ! Clean residual min=-0.008768 max=0.009669 Jy/beam ! Clean residual mean=-0.000011 rms=0.002303 Jy/beam ! Combined flux in latest and established models = 0.0743775 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.0743775 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102289Jy sigma=0.000577 ! Fit after self-cal, rms=0.102386Jy sigma=0.000577 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000664255 Jy ! Component: 100 - total flux cleaned = -0.000726695 Jy ! Component: 150 - total flux cleaned = -0.000768562 Jy ! Component: 200 - total flux cleaned = -0.000769191 Jy ! Total flux subtracted in 200 components = -0.000769191 Jy ! Clean residual min=-0.008592 max=0.009618 Jy/beam ! Clean residual mean=-0.000011 rms=0.002290 Jy/beam ! Combined flux in latest and established models = 0.0736083 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 39 components and 0.0736083 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102271Jy sigma=0.000577 ! Fit after self-cal, rms=0.102318Jy sigma=0.000577 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102318Jy sigma=0.000577 ! Fit after self-cal, rms=0.102557Jy sigma=0.000577 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.309 mas, bmaj=7.812 mas, bpa=13.77 degrees ! Estimated noise=4398.69 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000834896 Jy ! Component: 100 - total flux cleaned = -0.000901406 Jy ! Component: 150 - total flux cleaned = -0.000943297 Jy ! Component: 200 - total flux cleaned = -0.000976004 Jy ! Total flux subtracted in 200 components = -0.000976004 Jy ! Clean residual min=-0.008420 max=0.009668 Jy/beam ! Clean residual mean=-0.000010 rms=0.002273 Jy/beam ! Combined flux in latest and established models = 0.0726323 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.0726323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102446Jy sigma=0.000576 ! Fit after self-cal, rms=0.102517Jy sigma=0.000576 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000659302 Jy ! Component: 100 - total flux cleaned = -0.000659654 Jy ! Component: 150 - total flux cleaned = -0.000743127 Jy ! Component: 200 - total flux cleaned = -0.000742524 Jy ! Total flux subtracted in 200 components = -0.000742524 Jy ! Clean residual min=-0.008236 max=0.009657 Jy/beam ! Clean residual mean=-0.000009 rms=0.002259 Jy/beam ! Combined flux in latest and established models = 0.0718897 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 41 components and 0.0718897 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102415Jy sigma=0.000576 ! Fit after self-cal, rms=0.102457Jy sigma=0.000576 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102457Jy sigma=0.000576 ! Fit after self-cal, rms=0.102596Jy sigma=0.000576 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.735 mas, bmaj=10.92 mas, bpa=7.66 degrees ! Estimated noise=5742.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00186619 Jy ! Component: 100 - total flux cleaned = -0.00209111 Jy ! Component: 150 - total flux cleaned = -0.00244049 Jy ! Component: 200 - total flux cleaned = -0.00267903 Jy ! Total flux subtracted in 200 components = -0.00267903 Jy ! Clean residual min=-0.009249 max=0.011380 Jy/beam ! Clean residual mean=-0.000013 rms=0.002868 Jy/beam ! Combined flux in latest and established models = 0.0692107 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 46 components and 0.0692107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102522Jy sigma=0.000576 ! Fit after self-cal, rms=0.102474Jy sigma=0.000575 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000670443 Jy ! Component: 100 - total flux cleaned = -0.000956404 Jy ! Component: 150 - total flux cleaned = -0.00117344 Jy ! Component: 200 - total flux cleaned = -0.0013541 Jy ! Total flux subtracted in 200 components = -0.0013541 Jy ! Clean residual min=-0.008977 max=0.011240 Jy/beam ! Clean residual mean=-0.000012 rms=0.002847 Jy/beam ! Combined flux in latest and established models = 0.0678566 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 47 components and 0.0678566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102414Jy sigma=0.000575 ! Fit after self-cal, rms=0.102351Jy sigma=0.000575 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=7.792 mas, bpa=13.61 degrees ! Estimated noise=4388.21 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.307 x 7.792 at 13.61 degrees (North through East) ! Clean map min=-0.01223 max=0.065303 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.885 mas, bmaj=6.594 mas, bpa=11.45 degrees ! Estimated noise=4978.58 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.049743 Jy ! Component: 100 - total flux cleaned = 0.0589026 Jy ! Component: 150 - total flux cleaned = 0.0632181 Jy ! Component: 200 - total flux cleaned = 0.0645066 Jy ! Total flux subtracted in 200 components = 0.0645066 Jy ! Clean residual min=-0.010495 max=0.010122 Jy/beam ! Clean residual mean=-0.000001 rms=0.002711 Jy/beam ! Combined flux in latest and established models = 0.0645066 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0645066 Jy ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=7.792 mas, bpa=13.61 degrees ! Estimated noise=4388.21 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0020757 Jy ! Component: 100 - total flux cleaned = 0.00250594 Jy ! Component: 150 - total flux cleaned = 0.00281166 Jy ! Component: 200 - total flux cleaned = 0.00305867 Jy ! Total flux subtracted in 200 components = 0.00305867 Jy ! Clean residual min=-0.008552 max=0.009488 Jy/beam ! Clean residual mean=-0.000006 rms=0.002284 Jy/beam ! Combined flux in latest and established models = 0.0675653 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 21 components and 0.0675653 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=6.735 mas, bmaj=10.92 mas, bpa=7.66 degrees ! Estimated noise=5742.84 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.66434e-05 Jy ! Component: 100 - total flux cleaned = 4.21504e-05 Jy ! Component: 150 - total flux cleaned = -7.58358e-05 Jy ! Component: 200 - total flux cleaned = -0.000335551 Jy ! Total flux subtracted in 200 components = -0.000335551 Jy ! Clean residual min=-0.009304 max=0.011071 Jy/beam ! Clean residual mean=-0.000014 rms=0.002872 Jy/beam ! Combined flux in latest and established models = 0.0672297 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224804 Jy ! Component: 100 - total flux cleaned = -0.000382751 Jy ! Component: 150 - total flux cleaned = -0.000523673 Jy ! Component: 200 - total flux cleaned = -0.000649123 Jy ! Total flux subtracted in 200 components = -0.000649123 Jy ! Clean residual min=-0.008952 max=0.011091 Jy/beam ! Clean residual mean=-0.000011 rms=0.002826 Jy/beam ! Combined flux in latest and established models = 0.0665806 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 39 components and 0.0665806 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.307 mas, bmaj=7.792 mas, bpa=13.61 degrees ! Estimated noise=4388.21 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137186 Jy ! Component: 100 - total flux cleaned = 0.00130457 Jy ! Component: 150 - total flux cleaned = 0.00124993 Jy ! Component: 200 - total flux cleaned = 0.00124883 Jy ! Total flux subtracted in 200 components = 0.00124883 Jy ! Clean residual min=-0.007790 max=0.010131 Jy/beam ! Clean residual mean=-0.000008 rms=0.002212 Jy/beam ! Combined flux in latest and established models = 0.0678294 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 54 components and 0.0678294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102294Jy sigma=0.000575 ! Fit after self-cal, rms=0.102396Jy sigma=0.000575 wmodel J0010+1058_S_2017_01_21_pus_map.mod ! Writing 54 model components to file: J0010+1058_S_2017_01_21_pus_map.mod wobs J0010+1058_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0010+1058_S_2017_01_21_pus_uvs.fits wwins J0010+1058_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0010+1058_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00271639 Jy ! Component: 100 - total flux cleaned = 0.00189733 Jy ! Component: 150 - total flux cleaned = 0.00114337 Jy ! Component: 200 - total flux cleaned = 0.000444841 Jy ! Component: 250 - total flux cleaned = -0.000208065 Jy ! Component: 300 - total flux cleaned = -0.000716465 Jy ! Component: 350 - total flux cleaned = -0.00110261 Jy ! Component: 400 - total flux cleaned = -0.00184429 Jy ! Component: 450 - total flux cleaned = -0.00219916 Jy ! Component: 500 - total flux cleaned = -0.00254506 Jy ! Component: 550 - total flux cleaned = -0.00288038 Jy ! Component: 600 - total flux cleaned = -0.00312471 Jy ! Component: 650 - total flux cleaned = -0.00343885 Jy ! Component: 700 - total flux cleaned = -0.00374253 Jy ! Component: 750 - total flux cleaned = -0.00388887 Jy ! Component: 800 - total flux cleaned = -0.0041022 Jy ! Component: 850 - total flux cleaned = -0.00430894 Jy ! Component: 900 - total flux cleaned = -0.0044434 Jy ! Component: 950 - total flux cleaned = -0.00457498 Jy ! Component: 1000 - total flux cleaned = -0.00463864 Jy ! Component: 1050 - total flux cleaned = -0.00463833 Jy ! Component: 1100 - total flux cleaned = -0.00475824 Jy ! Component: 1150 - total flux cleaned = -0.00487389 Jy ! Component: 1200 - total flux cleaned = -0.00487321 Jy ! Component: 1250 - total flux cleaned = -0.00504049 Jy ! Component: 1300 - total flux cleaned = -0.00504026 Jy ! Component: 1350 - total flux cleaned = -0.00471932 Jy ! Component: 1400 - total flux cleaned = -0.00461441 Jy ! Component: 1450 - total flux cleaned = -0.00445985 Jy ! Component: 1500 - total flux cleaned = -0.00435877 Jy ! Component: 1550 - total flux cleaned = -0.00425864 Jy ! Component: 1600 - total flux cleaned = -0.00415958 Jy ! Component: 1650 - total flux cleaned = -0.00406155 Jy ! Component: 1700 - total flux cleaned = -0.00391594 Jy ! Component: 1750 - total flux cleaned = -0.00386823 Jy ! Component: 1800 - total flux cleaned = -0.00372615 Jy ! Component: 1850 - total flux cleaned = -0.00367935 Jy ! Component: 1900 - total flux cleaned = -0.00363288 Jy ! Component: 1950 - total flux cleaned = -0.00358645 Jy ! Component: 2000 - total flux cleaned = -0.00331285 Jy ! Component: 2050 - total flux cleaned = -0.00322233 Jy ! Component: 2100 - total flux cleaned = -0.00304229 Jy ! Component: 2150 - total flux cleaned = -0.00277452 Jy ! Component: 2200 - total flux cleaned = -0.0025088 Jy ! Component: 2250 - total flux cleaned = -0.00228849 Jy ! Component: 2300 - total flux cleaned = -0.00211334 Jy ! Component: 2350 - total flux cleaned = -0.00189484 Jy ! Component: 2400 - total flux cleaned = -0.00163416 Jy ! Component: 2450 - total flux cleaned = -0.00137481 Jy ! Component: 2500 - total flux cleaned = -0.00115887 Jy ! Component: 2550 - total flux cleaned = -0.000900333 Jy ! Component: 2600 - total flux cleaned = -0.00068491 Jy ! Component: 2650 - total flux cleaned = -0.000383771 Jy ! Component: 2700 - total flux cleaned = -0.000126119 Jy ! Component: 2750 - total flux cleaned = 8.86674e-05 Jy ! Component: 2800 - total flux cleaned = 0.000346125 Jy ! Component: 2850 - total flux cleaned = 0.000560682 Jy ! Component: 2900 - total flux cleaned = 0.000775215 Jy ! Component: 2950 - total flux cleaned = 0.00103295 Jy ! Component: 3000 - total flux cleaned = 0.00129119 Jy ! Component: 3050 - total flux cleaned = 0.00150714 Jy ! Component: 3100 - total flux cleaned = 0.00176633 Jy ! Component: 3150 - total flux cleaned = 0.00202609 Jy ! Component: 3200 - total flux cleaned = 0.00224289 Jy ! Component: 3250 - total flux cleaned = 0.00246013 Jy ! Component: 3300 - total flux cleaned = 0.00263433 Jy ! Component: 3350 - total flux cleaned = 0.00289722 Jy ! Component: 3400 - total flux cleaned = 0.00307374 Jy ! Component: 3450 - total flux cleaned = 0.00325046 Jy ! Component: 3500 - total flux cleaned = 0.0033837 Jy ! Component: 3550 - total flux cleaned = 0.00351791 Jy ! Component: 3600 - total flux cleaned = 0.00360803 Jy ! Component: 3650 - total flux cleaned = 0.00374486 Jy ! Component: 3700 - total flux cleaned = 0.0037903 Jy ! Component: 3750 - total flux cleaned = 0.00392929 Jy ! Component: 3800 - total flux cleaned = 0.00411566 Jy ! Component: 3850 - total flux cleaned = 0.00425774 Jy ! Component: 3900 - total flux cleaned = 0.00440082 Jy ! Component: 3950 - total flux cleaned = 0.00454577 Jy ! Component: 4000 - total flux cleaned = 0.00459369 Jy ! Component: 4050 - total flux cleaned = 0.00479152 Jy ! Total flux subtracted in 4096 components = 0.00494171 Jy ! Clean residual min=-0.002795 max=0.004073 Jy/beam ! Clean residual mean=0.000021 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.0727711 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 295 components and 0.0727711 Jy ![Exited script file: muppet] wmap "J0010+1058_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.307 x 7.792 at 13.61 degrees (North through East) ! Clean map min=-0.011622 max=0.065152 Jy/beam ! Writing clean map to FITS file: J0010+1058_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0651517 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000898961 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -4.13939 4.13939 8.27878 16.5576 33.1151 66.2303 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0026 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.065 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.307 x 7.792 at 13.61 degrees (North through East) ! Clean map min=-0.011622 max=0.065152 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0010+1058_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:42:38 2019