! Started logfile: J0009-3216_S_2017_10_21_pus_uvs.log on Sat May 11 20:47:03 2019 obs J0009-3216_S_2017_10_21_pus_uva.fits ! Reading UV FITS file: J0009-3216_S_2017_10_21_pus_uva.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.270594 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0009-3216 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 644 lines of history. ! ! Reading 2260 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0009-3216_S_2017_10_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 296 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 266 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 236 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 522 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.906887Jy sigma=0.006367 ! Fit after self-cal, rms=0.878018Jy sigma=0.006246 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.64 mas, bmaj=59.93 mas, bpa=17.5 degrees ! Estimated noise=3077.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0961328 Jy ! Component: 100 - total flux cleaned = 0.117317 Jy ! Total flux subtracted in 100 components = 0.117317 Jy ! Clean residual min=-0.007290 max=0.007352 Jy/beam ! Clean residual mean=-0.000100 rms=0.002936 Jy/beam ! Combined flux in latest and established models = 0.117317 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.117317 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.105191Jy sigma=0.000651 ! Fit after self-cal, rms=0.105178Jy sigma=0.000650 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.86 mas, bmaj=58.63 mas, bpa=16.29 degrees ! Estimated noise=2786.87 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00424515 Jy ! Component: 100 - total flux cleaned = 0.00733391 Jy ! Component: 150 - total flux cleaned = 0.00550367 Jy ! Component: 200 - total flux cleaned = 0.00224813 Jy ! Total flux subtracted in 200 components = 0.00224813 Jy ! Clean residual min=-0.002890 max=0.002845 Jy/beam ! Clean residual mean=-0.000074 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.119565 Jy ! Performing phase self-cal ! Adding 99 model components to the UV plane model. ! The established model now contains 110 components and 0.119565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102947Jy sigma=0.000638 ! Fit after self-cal, rms=0.102671Jy sigma=0.000637 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.99 HN 1.00* KP 0.99 ! LA 1.04 MK 1.00* NL 1.00* OV 1.02 ! PT 1.00* ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.17 HN 1.00* KP 0.96 ! LA 1.08 MK 1.00* NL 0.95 OV 1.02 ! PT 1.00* ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.96 HN 1.00* KP 0.97 ! LA 0.79 MK 1.00* NL 1.07 OV 1.01 ! PT 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* ! ! ! Fit before self-cal, rms=0.102671Jy sigma=0.000637 ! Fit after self-cal, rms=0.098148Jy sigma=0.000630 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=9.93 mas, bmaj=58.76 mas, bpa=16.27 degrees ! Estimated noise=2765.32 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000709766 Jy ! Component: 100 - total flux cleaned = 0.000289556 Jy ! Component: 150 - total flux cleaned = 0.000174855 Jy ! Component: 200 - total flux cleaned = 1.32166e-05 Jy ! Total flux subtracted in 200 components = 1.32166e-05 Jy ! Clean residual min=-0.000868 max=0.000875 Jy/beam ! Clean residual mean=-0.000004 rms=0.000332 Jy/beam ! Combined flux in latest and established models = 0.119579 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 165 components and 0.119579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098038Jy sigma=0.000630 ! Fit after self-cal, rms=0.097990Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097990Jy sigma=0.000629 ! Fit after self-cal, rms=0.098204Jy sigma=0.000629 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.929 mas, bmaj=58.8 mas, bpa=16.26 degrees ! Estimated noise=2769.32 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.43484e-05 Jy ! Component: 100 - total flux cleaned = -0.00016839 Jy ! Component: 150 - total flux cleaned = -0.000256924 Jy ! Component: 200 - total flux cleaned = -0.00021732 Jy ! Total flux subtracted in 200 components = -0.00021732 Jy ! Clean residual min=-0.000671 max=0.000667 Jy/beam ! Clean residual mean=-0.000003 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 0.119361 Jy selfcal ! Performing phase self-cal ! Adding 73 model components to the UV plane model. ! The established model now contains 237 components and 0.119361 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098154Jy sigma=0.000629 ! Fit after self-cal, rms=0.098158Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.71297e-05 Jy ! Component: 100 - total flux cleaned = 0.000134155 Jy ! Component: 150 - total flux cleaned = 0.000100709 Jy ! Component: 200 - total flux cleaned = -0.000181869 Jy ! Total flux subtracted in 200 components = -0.000181869 Jy ! Clean residual min=-0.000582 max=0.000576 Jy/beam ! Clean residual mean=-0.000000 rms=0.000226 Jy/beam ! Combined flux in latest and established models = 0.119179 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 280 components and 0.119179 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098130Jy sigma=0.000629 ! Fit after self-cal, rms=0.098132Jy sigma=0.000629 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098132Jy sigma=0.000629 ! Fit after self-cal, rms=0.098317Jy sigma=0.000629 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.927 mas, bmaj=58.8 mas, bpa=16.25 degrees ! Estimated noise=2775.8 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000381819 Jy ! Component: 100 - total flux cleaned = -0.000518256 Jy ! Component: 150 - total flux cleaned = -0.000423814 Jy ! Component: 200 - total flux cleaned = -0.000395316 Jy ! Total flux subtracted in 200 components = -0.000395316 Jy ! Clean residual min=-0.000481 max=0.000480 Jy/beam ! Clean residual mean=-0.000002 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.118784 Jy selfcal ! Performing phase self-cal ! Adding 68 model components to the UV plane model. ! The established model now contains 337 components and 0.118784 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098291Jy sigma=0.000629 ! Fit after self-cal, rms=0.098298Jy sigma=0.000629 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000170806 Jy ! Component: 100 - total flux cleaned = 0.000170899 Jy ! Component: 150 - total flux cleaned = 0.000142561 Jy ! Component: 200 - total flux cleaned = 0.000170429 Jy ! Total flux subtracted in 200 components = 0.000170429 Jy ! Clean residual min=-0.000451 max=0.000447 Jy/beam ! Clean residual mean=-0.000001 rms=0.000165 Jy/beam ! Combined flux in latest and established models = 0.118954 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 378 components and 0.118954 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098281Jy sigma=0.000628 ! Fit after self-cal, rms=0.098283Jy sigma=0.000628 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098283Jy sigma=0.000628 ! Fit after self-cal, rms=0.098417Jy sigma=0.000628 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.7 mas, bmaj=58.48 mas, bpa=16.35 degrees ! Estimated noise=2780.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000321603 Jy ! Component: 100 - total flux cleaned = -0.000271253 Jy ! Component: 150 - total flux cleaned = -0.000222047 Jy ! Component: 200 - total flux cleaned = -0.000155734 Jy ! Total flux subtracted in 200 components = -0.000155734 Jy ! Clean residual min=-0.000368 max=0.000361 Jy/beam ! Clean residual mean=-0.000001 rms=0.000130 Jy/beam ! Combined flux in latest and established models = 0.118799 Jy selfcal ! Performing phase self-cal ! Adding 66 model components to the UV plane model. ! The established model now contains 434 components and 0.118799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098401Jy sigma=0.000628 ! Fit after self-cal, rms=0.098406Jy sigma=0.000628 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000163343 Jy ! Component: 100 - total flux cleaned = 0.000378762 Jy ! Component: 150 - total flux cleaned = 0.000483332 Jy ! Component: 200 - total flux cleaned = 0.00039859 Jy ! Total flux subtracted in 200 components = 0.00039859 Jy ! Clean residual min=-0.000357 max=0.000353 Jy/beam ! Clean residual mean=-0.000000 rms=0.000126 Jy/beam ! Combined flux in latest and established models = 0.119197 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 478 components and 0.119197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098395Jy sigma=0.000628 ! Fit after self-cal, rms=0.098396Jy sigma=0.000628 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=9.924 mas, bmaj=58.81 mas, bpa=16.24 degrees ! Estimated noise=2780.67 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.924 x 58.81 at 16.24 degrees (North through East) ! Clean map min=-0.0071821 max=0.11351 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.699 mas, bmaj=60.19 mas, bpa=17.44 degrees ! Estimated noise=3081.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0958208 Jy ! Component: 100 - total flux cleaned = 0.117487 Jy ! Component: 150 - total flux cleaned = 0.119612 Jy ! Component: 200 - total flux cleaned = 0.120768 Jy ! Total flux subtracted in 200 components = 0.120768 Jy ! Clean residual min=-0.003907 max=0.003973 Jy/beam ! Clean residual mean=-0.000063 rms=0.001689 Jy/beam ! Combined flux in latest and established models = 0.120767 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 48 model components to the UV plane model. ! The established model now contains 48 components and 0.120767 Jy ! Inverting map and beam ! Estimated beam: bmin=9.924 mas, bmaj=58.81 mas, bpa=16.24 degrees ! Estimated noise=2780.67 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109943 Jy ! Component: 100 - total flux cleaned = 8.40718e-05 Jy ! Component: 150 - total flux cleaned = -0.00126822 Jy ! Component: 200 - total flux cleaned = -0.00197781 Jy ! Total flux subtracted in 200 components = -0.00197781 Jy ! Clean residual min=-0.001812 max=0.001816 Jy/beam ! Clean residual mean=-0.000027 rms=0.000740 Jy/beam ! Combined flux in latest and established models = 0.11879 Jy ! Adding 96 model components to the UV plane model. ! The established model now contains 143 components and 0.11879 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=10.7 mas, bmaj=58.48 mas, bpa=16.35 degrees ! Estimated noise=2780.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000510566 Jy ! Component: 100 - total flux cleaned = 0.000157129 Jy ! Component: 150 - total flux cleaned = 0.000472624 Jy ! Component: 200 - total flux cleaned = 0.000472931 Jy ! Total flux subtracted in 200 components = 0.000472931 Jy ! Clean residual min=-0.000837 max=0.000825 Jy/beam ! Clean residual mean=-0.000006 rms=0.000329 Jy/beam ! Combined flux in latest and established models = 0.119263 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000199864 Jy ! Component: 100 - total flux cleaned = -0.000301314 Jy ! Component: 150 - total flux cleaned = -0.000504579 Jy ! Component: 200 - total flux cleaned = -0.000555898 Jy ! Total flux subtracted in 200 components = -0.000555898 Jy ! Clean residual min=-0.000873 max=0.000870 Jy/beam ! Clean residual mean=-0.000003 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.118707 Jy ! Adding 117 model components to the UV plane model. ! The established model now contains 260 components and 0.118707 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=9.924 mas, bmaj=58.81 mas, bpa=16.24 degrees ! Estimated noise=2780.67 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000811626 Jy ! Component: 100 - total flux cleaned = 0.000899522 Jy ! Component: 150 - total flux cleaned = 0.00105345 Jy ! Component: 200 - total flux cleaned = 0.000947552 Jy ! Total flux subtracted in 200 components = 0.000947552 Jy ! Clean residual min=-0.000580 max=0.000574 Jy/beam ! Clean residual mean=-0.000003 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.119654 Jy selfcal ! Performing phase self-cal ! Adding 77 model components to the UV plane model. ! The established model now contains 337 components and 0.119654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098454Jy sigma=0.000629 ! Fit after self-cal, rms=0.098429Jy sigma=0.000629 wmodel J0009-3216_S_2017_10_21_pus_map.mod ! Writing 337 model components to file: J0009-3216_S_2017_10_21_pus_map.mod wobs J0009-3216_S_2017_10_21_pus_uvs.fits ! Writing UV FITS file: J0009-3216_S_2017_10_21_pus_uvs.fits wwins J0009-3216_S_2017_10_21_pus_map.win ! wwins: No CLEAN windows to write. ! Error occured in command: wwins ![Exited script file: muppet] ! wmap "J0009-3216_S_2017_10_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.924 x 58.81 at 16.24 degrees (North through East) ! Clean map min=-0.0039862 max=0.11566 Jy/beam ! Writing clean map to FITS file: J0009-3216_S_2017_10_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.115657 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000196465 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.509607 0.509607 1.01921 2.03843 4.07686 8.15371 16.3074 32.6149 65.2297 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.115 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 9.924 x 58.81 at 16.24 degrees (North through East) ! Clean map min=-0.0039862 max=0.11566 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0009-3216_S_2017_10_21_pus_uvs.log closed on Sat May 11 20:47:08 2019