! Started logfile: J0009-3216_S_2017_10_09_pus_uvs.log on Sun May 12 13:01:30 2019 obs J0009-3216_S_2017_10_09_pus_uva.fits ! Reading UV FITS file: J0009-3216_S_2017_10_09_pus_uva.fits ! AN table 1: 116 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.505029 visibilities/baseline/integration-bin. ! Found source: J0009-3216 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 496 lines of history. ! ! Reading 8436 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0009-3216_S_2017_10_09_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 344 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 404 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 358 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 820 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.919615Jy sigma=0.006594 ! Fit after self-cal, rms=0.894235Jy sigma=0.006411 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.704 mas, bmaj=13.48 mas, bpa=-26.46 degrees ! Estimated noise=2268.58 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0834537 Jy ! Component: 100 - total flux cleaned = 0.110401 Jy ! Total flux subtracted in 100 components = 0.110401 Jy ! Clean residual min=-0.009313 max=0.017730 Jy/beam ! Clean residual mean=-0.000013 rms=0.003492 Jy/beam ! Combined flux in latest and established models = 0.110401 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.110401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106584Jy sigma=0.000705 ! Fit after self-cal, rms=0.106406Jy sigma=0.000703 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=14.83 mas, bpa=-25.09 degrees ! Estimated noise=1306 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0152424 Jy ! Component: 100 - total flux cleaned = 0.0231283 Jy ! Component: 150 - total flux cleaned = 0.0271338 Jy ! Component: 200 - total flux cleaned = 0.0278359 Jy ! Total flux subtracted in 200 components = 0.0278359 Jy ! Clean residual min=-0.008161 max=0.013685 Jy/beam ! Clean residual mean=-0.000047 rms=0.003228 Jy/beam ! Combined flux in latest and established models = 0.138237 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 37 components and 0.138237 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103824Jy sigma=0.000690 ! Fit after self-cal, rms=0.103736Jy sigma=0.000690 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.37 FD 0.98 HN 0.93 KP 0.99 ! LA 0.93 MK 0.95 NL 0.87 OV 1.00* ! PT 0.91 ! ! ! Correcting IF 2. ! A total of 138 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 2.46 FD 1.03 HN 0.99 KP 0.96 ! LA 0.93 MK 0.97 NL 1.08 OV 1.00* ! PT 0.88 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.57 FD 0.96 HN 0.94 KP 0.85 ! LA 0.73 MK 1.00 NL 1.13 OV 1.00* ! PT 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 1.11 HN 0.80 KP 1.00* ! LA 1.00* MK 1.20 NL 1.00* OV 1.00* ! PT 0.93 ! ! ! Fit before self-cal, rms=0.103736Jy sigma=0.000690 ! Fit after self-cal, rms=0.106624Jy sigma=0.000661 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.293 mas, bmaj=15.48 mas, bpa=-25.07 degrees ! Estimated noise=1346.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00185664 Jy ! Component: 100 - total flux cleaned = -0.00210308 Jy ! Component: 150 - total flux cleaned = -0.00236644 Jy ! Component: 200 - total flux cleaned = -0.00258203 Jy ! Total flux subtracted in 200 components = -0.00258203 Jy ! Clean residual min=-0.005037 max=0.003767 Jy/beam ! Clean residual mean=-0.000016 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.135655 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 57 components and 0.135655 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106471Jy sigma=0.000661 ! Fit after self-cal, rms=0.106858Jy sigma=0.000659 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106858Jy sigma=0.000659 ! Fit after self-cal, rms=0.108961Jy sigma=0.000656 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.329 mas, bmaj=15.42 mas, bpa=-25.09 degrees ! Estimated noise=1344.78 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00157071 Jy ! Component: 100 - total flux cleaned = -0.00170181 Jy ! Component: 150 - total flux cleaned = -0.0016686 Jy ! Component: 200 - total flux cleaned = -0.00161272 Jy ! Total flux subtracted in 200 components = -0.00161272 Jy ! Clean residual min=-0.004817 max=0.003542 Jy/beam ! Clean residual mean=-0.000011 rms=0.001033 Jy/beam ! Combined flux in latest and established models = 0.134042 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 66 components and 0.134042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108918Jy sigma=0.000656 ! Fit after self-cal, rms=0.108991Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146998 Jy ! Component: 100 - total flux cleaned = -0.000147148 Jy ! Component: 150 - total flux cleaned = -0.000147216 Jy ! Component: 200 - total flux cleaned = -0.000147465 Jy ! Total flux subtracted in 200 components = -0.000147465 Jy ! Clean residual min=-0.004757 max=0.003547 Jy/beam ! Clean residual mean=-0.000012 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.133894 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 0.133894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108977Jy sigma=0.000656 ! Fit after self-cal, rms=0.108965Jy sigma=0.000656 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108965Jy sigma=0.000656 ! Fit after self-cal, rms=0.109797Jy sigma=0.000656 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.354 mas, bmaj=15.42 mas, bpa=-25.18 degrees ! Estimated noise=1347.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00106436 Jy ! Component: 100 - total flux cleaned = -0.00116042 Jy ! Component: 150 - total flux cleaned = -0.00115998 Jy ! Component: 200 - total flux cleaned = -0.00111513 Jy ! Total flux subtracted in 200 components = -0.00111513 Jy ! Clean residual min=-0.004666 max=0.003495 Jy/beam ! Clean residual mean=-0.000010 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.132779 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 84 components and 0.132779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109772Jy sigma=0.000656 ! Fit after self-cal, rms=0.109784Jy sigma=0.000656 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.0397e-05 Jy ! Component: 100 - total flux cleaned = -1.10947e-05 Jy ! Component: 150 - total flux cleaned = 9.19467e-06 Jy ! Component: 200 - total flux cleaned = 2.87897e-05 Jy ! Total flux subtracted in 200 components = 2.87897e-05 Jy ! Clean residual min=-0.004656 max=0.003512 Jy/beam ! Clean residual mean=-0.000010 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.132808 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 95 components and 0.132808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109776Jy sigma=0.000655 ! Fit after self-cal, rms=0.109764Jy sigma=0.000655 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109764Jy sigma=0.000655 ! Fit after self-cal, rms=0.110255Jy sigma=0.000655 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.267 mas, bmaj=28 mas, bpa=-9.832 degrees ! Estimated noise=1596.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000591199 Jy ! Component: 100 - total flux cleaned = -0.000569746 Jy ! Component: 150 - total flux cleaned = -0.000508726 Jy ! Component: 200 - total flux cleaned = -0.000470677 Jy ! Total flux subtracted in 200 components = -0.000470677 Jy ! Clean residual min=-0.004685 max=0.004013 Jy/beam ! Clean residual mean=-0.000013 rms=0.001273 Jy/beam ! Combined flux in latest and established models = 0.132337 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 100 components and 0.132337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110247Jy sigma=0.000655 ! Fit after self-cal, rms=0.110261Jy sigma=0.000655 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.68122e-05 Jy ! Component: 100 - total flux cleaned = 8.63054e-05 Jy ! Component: 150 - total flux cleaned = 0.000123112 Jy ! Component: 200 - total flux cleaned = 0.000157311 Jy ! Total flux subtracted in 200 components = 0.000157311 Jy ! Clean residual min=-0.004665 max=0.004020 Jy/beam ! Clean residual mean=-0.000012 rms=0.001268 Jy/beam ! Combined flux in latest and established models = 0.132495 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 103 components and 0.132495 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110259Jy sigma=0.000655 ! Fit after self-cal, rms=0.110261Jy sigma=0.000655 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=15.45 mas, bpa=-25.29 degrees ! Estimated noise=1350.09 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.37 x 15.45 at -25.29 degrees (North through East) ! Clean map min=-0.0044673 max=0.1067 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.733 mas, bmaj=13.92 mas, bpa=-26.44 degrees ! Estimated noise=2297.16 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0835279 Jy ! Component: 100 - total flux cleaned = 0.109687 Jy ! Component: 150 - total flux cleaned = 0.121456 Jy ! Component: 200 - total flux cleaned = 0.126613 Jy ! Total flux subtracted in 200 components = 0.126613 Jy ! Clean residual min=-0.005186 max=0.004788 Jy/beam ! Clean residual mean=-0.000007 rms=0.001367 Jy/beam ! Combined flux in latest and established models = 0.126613 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.126613 Jy ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=15.45 mas, bpa=-25.29 degrees ! Estimated noise=1350.09 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167655 Jy ! Component: 100 - total flux cleaned = 0.00205597 Jy ! Component: 150 - total flux cleaned = 0.00228771 Jy ! Component: 200 - total flux cleaned = 0.00247449 Jy ! Total flux subtracted in 200 components = 0.00247449 Jy ! Clean residual min=-0.004693 max=0.003606 Jy/beam ! Clean residual mean=-0.000012 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.129088 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 41 components and 0.129088 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.267 mas, bmaj=28 mas, bpa=-9.832 degrees ! Estimated noise=1596.97 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157447 Jy ! Component: 100 - total flux cleaned = 0.00167727 Jy ! Component: 150 - total flux cleaned = 0.00176091 Jy ! Component: 200 - total flux cleaned = 0.00179681 Jy ! Total flux subtracted in 200 components = 0.00179681 Jy ! Clean residual min=-0.004889 max=0.004024 Jy/beam ! Clean residual mean=-0.000016 rms=0.001330 Jy/beam ! Combined flux in latest and established models = 0.130885 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.36505e-05 Jy ! Component: 100 - total flux cleaned = 0.000119714 Jy ! Component: 150 - total flux cleaned = 0.000198164 Jy ! Component: 200 - total flux cleaned = 0.000275993 Jy ! Total flux subtracted in 200 components = 0.000275993 Jy ! Clean residual min=-0.004830 max=0.004052 Jy/beam ! Clean residual mean=-0.000015 rms=0.001315 Jy/beam ! Combined flux in latest and established models = 0.131161 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 61 components and 0.131161 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.37 mas, bmaj=15.45 mas, bpa=-25.29 degrees ! Estimated noise=1350.09 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000718913 Jy ! Component: 100 - total flux cleaned = -0.000790624 Jy ! Component: 150 - total flux cleaned = -0.000792291 Jy ! Component: 200 - total flux cleaned = -0.000682114 Jy ! Total flux subtracted in 200 components = -0.000682114 Jy ! Clean residual min=-0.004854 max=0.003643 Jy/beam ! Clean residual mean=-0.000011 rms=0.001046 Jy/beam ! Combined flux in latest and established models = 0.130479 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 81 components and 0.130479 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110319Jy sigma=0.000656 ! Fit after self-cal, rms=0.110327Jy sigma=0.000656 wmodel J0009-3216_S_2017_10_09_pus_map.mod ! Writing 81 model components to file: J0009-3216_S_2017_10_09_pus_map.mod wobs J0009-3216_S_2017_10_09_pus_uvs.fits ! Writing UV FITS file: J0009-3216_S_2017_10_09_pus_uvs.fits wwins J0009-3216_S_2017_10_09_pus_map.win ! wwins: Wrote 1 windows to J0009-3216_S_2017_10_09_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00180836 Jy ! Component: 100 - total flux cleaned = -0.00250656 Jy ! Component: 150 - total flux cleaned = -0.00308681 Jy ! Component: 200 - total flux cleaned = -0.00366372 Jy ! Component: 250 - total flux cleaned = -0.00381156 Jy ! Component: 300 - total flux cleaned = -0.00394697 Jy ! Component: 350 - total flux cleaned = -0.00411382 Jy ! Component: 400 - total flux cleaned = -0.00423169 Jy ! Component: 450 - total flux cleaned = -0.00423035 Jy ! Component: 500 - total flux cleaned = -0.00441012 Jy ! Component: 550 - total flux cleaned = -0.00458164 Jy ! Component: 600 - total flux cleaned = -0.00468179 Jy ! Component: 650 - total flux cleaned = -0.00477639 Jy ! Component: 700 - total flux cleaned = -0.00474441 Jy ! Component: 750 - total flux cleaned = -0.00480426 Jy ! Component: 800 - total flux cleaned = -0.00480425 Jy ! Component: 850 - total flux cleaned = -0.00486028 Jy ! Component: 900 - total flux cleaned = -0.00483262 Jy ! Component: 950 - total flux cleaned = -0.00488613 Jy ! Component: 1000 - total flux cleaned = -0.00485982 Jy ! Component: 1050 - total flux cleaned = -0.00491051 Jy ! Component: 1100 - total flux cleaned = -0.0048366 Jy ! Component: 1150 - total flux cleaned = -0.00481316 Jy ! Component: 1200 - total flux cleaned = -0.00476689 Jy ! Component: 1250 - total flux cleaned = -0.00483513 Jy ! Component: 1300 - total flux cleaned = -0.00478943 Jy ! Component: 1350 - total flux cleaned = -0.00465785 Jy ! Component: 1400 - total flux cleaned = -0.00461566 Jy ! Component: 1450 - total flux cleaned = -0.00457345 Jy ! Component: 1500 - total flux cleaned = -0.0044491 Jy ! Component: 1550 - total flux cleaned = -0.00438832 Jy ! Component: 1600 - total flux cleaned = -0.00428828 Jy ! Component: 1650 - total flux cleaned = -0.00420955 Jy ! Component: 1700 - total flux cleaned = -0.00419008 Jy ! Component: 1750 - total flux cleaned = -0.00415139 Jy ! Component: 1800 - total flux cleaned = -0.00411365 Jy ! Component: 1850 - total flux cleaned = -0.00407682 Jy ! Component: 1900 - total flux cleaned = -0.0040218 Jy ! Component: 1950 - total flux cleaned = -0.00396792 Jy ! Component: 2000 - total flux cleaned = -0.00393254 Jy ! Component: 2050 - total flux cleaned = -0.00391494 Jy ! Component: 2100 - total flux cleaned = -0.00382873 Jy ! Component: 2150 - total flux cleaned = -0.00379467 Jy ! Component: 2200 - total flux cleaned = -0.00374444 Jy ! Component: 2250 - total flux cleaned = -0.00372791 Jy ! Component: 2300 - total flux cleaned = -0.0037115 Jy ! Component: 2350 - total flux cleaned = -0.0037114 Jy ! Component: 2400 - total flux cleaned = -0.00375961 Jy ! Component: 2450 - total flux cleaned = -0.00374365 Jy ! Component: 2500 - total flux cleaned = -0.00380694 Jy ! Component: 2550 - total flux cleaned = -0.00386955 Jy ! Component: 2600 - total flux cleaned = -0.00391604 Jy ! Component: 2650 - total flux cleaned = -0.00394683 Jy ! Component: 2700 - total flux cleaned = -0.00391615 Jy ! Component: 2750 - total flux cleaned = -0.00391619 Jy ! Component: 2800 - total flux cleaned = -0.00394627 Jy ! Component: 2850 - total flux cleaned = -0.00397622 Jy ! Component: 2900 - total flux cleaned = -0.00397619 Jy ! Component: 2950 - total flux cleaned = -0.00399094 Jy ! Component: 3000 - total flux cleaned = -0.00397616 Jy ! Component: 3050 - total flux cleaned = -0.00402013 Jy ! Component: 3100 - total flux cleaned = -0.00402008 Jy ! Component: 3150 - total flux cleaned = -0.0040056 Jy ! Component: 3200 - total flux cleaned = -0.00400554 Jy ! Component: 3250 - total flux cleaned = -0.00399113 Jy ! Component: 3300 - total flux cleaned = -0.00401972 Jy ! Component: 3350 - total flux cleaned = -0.00401961 Jy ! Component: 3400 - total flux cleaned = -0.00400538 Jy ! Component: 3450 - total flux cleaned = -0.00403379 Jy ! Component: 3500 - total flux cleaned = -0.00406207 Jy ! Component: 3550 - total flux cleaned = -0.00409025 Jy ! Component: 3600 - total flux cleaned = -0.00409035 Jy ! Component: 3650 - total flux cleaned = -0.00414652 Jy ! Component: 3700 - total flux cleaned = -0.00417445 Jy ! Component: 3750 - total flux cleaned = -0.00420241 Jy ! Component: 3800 - total flux cleaned = -0.00421635 Jy ! Component: 3850 - total flux cleaned = -0.00424427 Jy ! Component: 3900 - total flux cleaned = -0.00425811 Jy ! Component: 3950 - total flux cleaned = -0.00432766 Jy ! Component: 4000 - total flux cleaned = -0.00435536 Jy ! Component: 4050 - total flux cleaned = -0.00436923 Jy ! Total flux subtracted in 4096 components = -0.00439693 Jy ! Clean residual min=-0.000743 max=0.000839 Jy/beam ! Clean residual mean=-0.000005 rms=0.000262 Jy/beam ! Combined flux in latest and established models = 0.126082 Jy keep ! Adding 287 model components to the UV plane model. ! The established model now contains 368 components and 0.126082 Jy ![Exited script file: muppet] wmap "J0009-3216_S_2017_10_09_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.37 x 15.45 at -25.29 degrees (North through East) ! Clean map min=-0.0025701 max=0.10714 Jy/beam ! Writing clean map to FITS file: J0009-3216_S_2017_10_09_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.107138 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000254934 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.713851 0.713851 1.4277 2.85541 5.71081 11.4216 22.8432 45.6865 91.373 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.107 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.37 x 15.45 at -25.29 degrees (North through East) ! Clean map min=-0.0025701 max=0.10714 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0009-3216_S_2017_10_09_pus_uvs.log closed on Sun May 12 13:01:34 2019