! Started logfile: J0008-3601_S_2017_01_21_pus_uvs.log on Sun May 5 15:42:29 2019 obs J0008-3601_S_2017_01_21_pus_uva.fits ! Reading UV FITS file: J0008-3601_S_2017_01_21_pus_uva.fits ! AN table 1: 58 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.575192 visibilities/baseline/integration-bin. ! Found source: J0008-3601 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 558 lines of history. ! ! Reading 4804 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0008-3601_S_2017_01_21_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 176 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 119 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 291 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.869932Jy sigma=0.004260 ! Fit after self-cal, rms=0.842303Jy sigma=0.004162 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.143 mas, bmaj=6.075 mas, bpa=-3.466 degrees ! Estimated noise=3496.49 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135622 Jy ! Component: 100 - total flux cleaned = 0.168578 Jy ! Total flux subtracted in 100 components = 0.168578 Jy ! Clean residual min=-0.013602 max=0.018456 Jy/beam ! Clean residual mean=-0.000162 rms=0.004256 Jy/beam ! Combined flux in latest and established models = 0.168578 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.168578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.169820Jy sigma=0.000671 ! Fit after self-cal, rms=0.169721Jy sigma=0.000671 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.49 mas, bmaj=6.802 mas, bpa=-3.967 degrees ! Estimated noise=2457.36 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170166 Jy ! Component: 100 - total flux cleaned = 0.0237542 Jy ! Component: 150 - total flux cleaned = 0.0269445 Jy ! Component: 200 - total flux cleaned = 0.0285925 Jy ! Total flux subtracted in 200 components = 0.0285925 Jy ! Clean residual min=-0.009074 max=0.012652 Jy/beam ! Clean residual mean=-0.000286 rms=0.003136 Jy/beam ! Combined flux in latest and established models = 0.197171 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 30 components and 0.197171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168904Jy sigma=0.000658 ! Fit after self-cal, rms=0.168840Jy sigma=0.000658 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00* HN 1.00* LA 1.01 ! MK 1.02 NL 1.05 OV 1.81 PT 0.94 ! SC 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00* HN 1.00* LA 0.93 ! MK 1.03 NL 1.00 OV 1.00* PT 0.94 ! SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.00* HN 1.00* LA 0.95 ! MK 1.03 NL 1.07 OV 1.29 PT 0.91 ! SC 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00* HN 1.00* LA 0.84 ! MK 0.86 NL 1.00* OV 1.00* PT 1.05 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.168840Jy sigma=0.000658 ! Fit after self-cal, rms=0.209233Jy sigma=0.000648 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.5 mas, bmaj=6.782 mas, bpa=-4.187 degrees ! Estimated noise=2451.11 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000989564 Jy ! Component: 100 - total flux cleaned = 0.00119742 Jy ! Component: 150 - total flux cleaned = 0.00111958 Jy ! Component: 200 - total flux cleaned = 0.00108618 Jy ! Total flux subtracted in 200 components = 0.00108618 Jy ! Clean residual min=-0.006079 max=0.005228 Jy/beam ! Clean residual mean=-0.000026 rms=0.001435 Jy/beam ! Combined flux in latest and established models = 0.198257 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 34 components and 0.198257 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.209203Jy sigma=0.000648 ! Fit after self-cal, rms=0.210247Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210247Jy sigma=0.000648 ! Fit after self-cal, rms=0.213934Jy sigma=0.000648 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.495 mas, bmaj=6.776 mas, bpa=-4.358 degrees ! Estimated noise=2448.13 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000221758 Jy ! Component: 100 - total flux cleaned = 0.000404996 Jy ! Component: 150 - total flux cleaned = 0.000430913 Jy ! Component: 200 - total flux cleaned = 0.000407857 Jy ! Total flux subtracted in 200 components = 0.000407857 Jy ! Clean residual min=-0.005983 max=0.005325 Jy/beam ! Clean residual mean=-0.000021 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 0.198665 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 38 components and 0.198665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213911Jy sigma=0.000648 ! Fit after self-cal, rms=0.213980Jy sigma=0.000648 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.99734e-05 Jy ! Component: 100 - total flux cleaned = -8.67361e-05 Jy ! Component: 150 - total flux cleaned = -6.83735e-05 Jy ! Component: 200 - total flux cleaned = -6.83588e-05 Jy ! Total flux subtracted in 200 components = -6.83588e-05 Jy ! Clean residual min=-0.005974 max=0.005380 Jy/beam ! Clean residual mean=-0.000021 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.198596 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 40 components and 0.198596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213974Jy sigma=0.000648 ! Fit after self-cal, rms=0.213982Jy sigma=0.000648 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213982Jy sigma=0.000648 ! Fit after self-cal, rms=0.217184Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.493 mas, bmaj=6.776 mas, bpa=-4.565 degrees ! Estimated noise=2450.33 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000563959 Jy ! Component: 100 - total flux cleaned = 0.000592286 Jy ! Component: 150 - total flux cleaned = 0.000590886 Jy ! Component: 200 - total flux cleaned = 0.000591451 Jy ! Total flux subtracted in 200 components = 0.000591451 Jy ! Clean residual min=-0.005938 max=0.005391 Jy/beam ! Clean residual mean=-0.000016 rms=0.001408 Jy/beam ! Combined flux in latest and established models = 0.199188 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 41 components and 0.199188 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217163Jy sigma=0.000647 ! Fit after self-cal, rms=0.217197Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.39055e-05 Jy ! Component: 100 - total flux cleaned = 3.97087e-05 Jy ! Component: 150 - total flux cleaned = 2.50758e-05 Jy ! Component: 200 - total flux cleaned = 2.60397e-05 Jy ! Total flux subtracted in 200 components = 2.60397e-05 Jy ! Clean residual min=-0.005900 max=0.005443 Jy/beam ! Clean residual mean=-0.000016 rms=0.001404 Jy/beam ! Combined flux in latest and established models = 0.199214 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 41 components and 0.199214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217192Jy sigma=0.000647 ! Fit after self-cal, rms=0.217197Jy sigma=0.000647 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217197Jy sigma=0.000647 ! Fit after self-cal, rms=0.217831Jy sigma=0.000647 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.66 mas, bmaj=21.65 mas, bpa=3.044 degrees ! Estimated noise=3733.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148931 Jy ! Component: 100 - total flux cleaned = 0.00171372 Jy ! Component: 150 - total flux cleaned = 0.00171689 Jy ! Component: 200 - total flux cleaned = 0.00171959 Jy ! Total flux subtracted in 200 components = 0.00171959 Jy ! Clean residual min=-0.005713 max=0.005280 Jy/beam ! Clean residual mean=-0.000008 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 0.200933 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 45 components and 0.200933 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217833Jy sigma=0.000647 ! Fit after self-cal, rms=0.217828Jy sigma=0.000647 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000146934 Jy ! Component: 100 - total flux cleaned = 0.000144006 Jy ! Component: 150 - total flux cleaned = 0.00014316 Jy ! Component: 200 - total flux cleaned = 0.000139545 Jy ! Total flux subtracted in 200 components = 0.000139545 Jy ! Clean residual min=-0.005665 max=0.005368 Jy/beam ! Clean residual mean=-0.000004 rms=0.001812 Jy/beam ! Combined flux in latest and established models = 0.201073 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 47 components and 0.201073 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217828Jy sigma=0.000648 ! Fit after self-cal, rms=0.217830Jy sigma=0.000647 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.49 mas, bmaj=6.779 mas, bpa=-4.767 degrees ! Estimated noise=2453.9 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.49 x 6.779 at -4.767 degrees (North through East) ! Clean map min=-0.0053813 max=0.1779 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.153 mas, bmaj=6.056 mas, bpa=-4.356 degrees ! Estimated noise=3509.25 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.135268 Jy ! Component: 100 - total flux cleaned = 0.171062 Jy ! Component: 150 - total flux cleaned = 0.186659 Jy ! Component: 200 - total flux cleaned = 0.193891 Jy ! Total flux subtracted in 200 components = 0.193891 Jy ! Clean residual min=-0.008695 max=0.008855 Jy/beam ! Clean residual mean=-0.000015 rms=0.002525 Jy/beam ! Combined flux in latest and established models = 0.193891 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.193891 Jy ! Inverting map and beam ! Estimated beam: bmin=2.49 mas, bmaj=6.779 mas, bpa=-4.767 degrees ! Estimated noise=2453.9 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00402433 Jy ! Component: 100 - total flux cleaned = 0.00523047 Jy ! Component: 150 - total flux cleaned = 0.00550587 Jy ! Component: 200 - total flux cleaned = 0.00550886 Jy ! Total flux subtracted in 200 components = 0.00550886 Jy ! Clean residual min=-0.006008 max=0.005200 Jy/beam ! Clean residual mean=-0.000019 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 0.1994 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.1994 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.66 mas, bmaj=21.65 mas, bpa=3.044 degrees ! Estimated noise=3733.34 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00149999 Jy ! Component: 100 - total flux cleaned = 0.00163724 Jy ! Component: 150 - total flux cleaned = 0.00163778 Jy ! Component: 200 - total flux cleaned = 0.00164108 Jy ! Total flux subtracted in 200 components = 0.00164108 Jy ! Clean residual min=-0.005712 max=0.005117 Jy/beam ! Clean residual mean=-0.000005 rms=0.001803 Jy/beam ! Combined flux in latest and established models = 0.201041 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.16167e-07 Jy ! Component: 100 - total flux cleaned = 1.71624e-05 Jy ! Component: 150 - total flux cleaned = 1.64504e-05 Jy ! Component: 200 - total flux cleaned = 2.85908e-05 Jy ! Total flux subtracted in 200 components = 2.85908e-05 Jy ! Clean residual min=-0.005685 max=0.005142 Jy/beam ! Clean residual mean=-0.000004 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 0.20107 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 39 components and 0.20107 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.49 mas, bmaj=6.779 mas, bpa=-4.767 degrees ! Estimated noise=2453.9 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0010701 Jy ! Component: 100 - total flux cleaned = -0.00111413 Jy ! Component: 150 - total flux cleaned = -0.0011531 Jy ! Component: 200 - total flux cleaned = -0.00118692 Jy ! Total flux subtracted in 200 components = -0.00118692 Jy ! Clean residual min=-0.005953 max=0.005252 Jy/beam ! Clean residual mean=-0.000014 rms=0.001421 Jy/beam ! Combined flux in latest and established models = 0.199883 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 45 components and 0.199883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.217817Jy sigma=0.000648 ! Fit after self-cal, rms=0.217837Jy sigma=0.000648 wmodel J0008-3601_S_2017_01_21_pus_map.mod ! Writing 45 model components to file: J0008-3601_S_2017_01_21_pus_map.mod wobs J0008-3601_S_2017_01_21_pus_uvs.fits ! Writing UV FITS file: J0008-3601_S_2017_01_21_pus_uvs.fits wwins J0008-3601_S_2017_01_21_pus_map.win ! wwins: Wrote 1 windows to J0008-3601_S_2017_01_21_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00108742 Jy ! Component: 100 - total flux cleaned = -0.00108551 Jy ! Component: 150 - total flux cleaned = -0.000925547 Jy ! Component: 200 - total flux cleaned = -0.000927028 Jy ! Component: 250 - total flux cleaned = -0.000994701 Jy ! Component: 300 - total flux cleaned = -0.00125854 Jy ! Component: 350 - total flux cleaned = -0.00150739 Jy ! Component: 400 - total flux cleaned = -0.0016272 Jy ! Component: 450 - total flux cleaned = -0.00180028 Jy ! Component: 500 - total flux cleaned = -0.00185704 Jy ! Component: 550 - total flux cleaned = -0.00201577 Jy ! Component: 600 - total flux cleaned = -0.00201655 Jy ! Component: 650 - total flux cleaned = -0.00216759 Jy ! Component: 700 - total flux cleaned = -0.0022667 Jy ! Component: 750 - total flux cleaned = -0.0023636 Jy ! Component: 800 - total flux cleaned = -0.00245903 Jy ! Component: 850 - total flux cleaned = -0.00250592 Jy ! Component: 900 - total flux cleaned = -0.00259868 Jy ! Component: 950 - total flux cleaned = -0.00264438 Jy ! Component: 1000 - total flux cleaned = -0.00269013 Jy ! Component: 1050 - total flux cleaned = -0.00282534 Jy ! Component: 1100 - total flux cleaned = -0.00287004 Jy ! Component: 1150 - total flux cleaned = -0.0029588 Jy ! Component: 1200 - total flux cleaned = -0.00304844 Jy ! Component: 1250 - total flux cleaned = -0.00318343 Jy ! Component: 1300 - total flux cleaned = -0.00322844 Jy ! Component: 1350 - total flux cleaned = -0.00327327 Jy ! Component: 1400 - total flux cleaned = -0.00336554 Jy ! Component: 1450 - total flux cleaned = -0.00341234 Jy ! Component: 1500 - total flux cleaned = -0.00345956 Jy ! Component: 1550 - total flux cleaned = -0.00355452 Jy ! Component: 1600 - total flux cleaned = -0.00360265 Jy ! Component: 1650 - total flux cleaned = -0.00369964 Jy ! Component: 1700 - total flux cleaned = -0.0037975 Jy ! Component: 1750 - total flux cleaned = -0.00384709 Jy ! Component: 1800 - total flux cleaned = -0.00379627 Jy ! Component: 1850 - total flux cleaned = -0.00374422 Jy ! Component: 1900 - total flux cleaned = -0.0036906 Jy ! Component: 1950 - total flux cleaned = -0.00363445 Jy ! Component: 2000 - total flux cleaned = -0.00363424 Jy ! Component: 2050 - total flux cleaned = -0.00357318 Jy ! Component: 2100 - total flux cleaned = -0.00357192 Jy ! Component: 2150 - total flux cleaned = -0.00350581 Jy ! Component: 2200 - total flux cleaned = -0.00350666 Jy ! Component: 2250 - total flux cleaned = -0.00343583 Jy ! Component: 2300 - total flux cleaned = -0.00336274 Jy ! Component: 2350 - total flux cleaned = -0.00336181 Jy ! Component: 2400 - total flux cleaned = -0.00320203 Jy ! Component: 2450 - total flux cleaned = -0.00320136 Jy ! Component: 2500 - total flux cleaned = -0.00311545 Jy ! Component: 2550 - total flux cleaned = -0.00302618 Jy ! Component: 2600 - total flux cleaned = -0.00283866 Jy ! Component: 2650 - total flux cleaned = -0.00274101 Jy ! Component: 2700 - total flux cleaned = -0.00253309 Jy ! Component: 2750 - total flux cleaned = -0.00242525 Jy ! Component: 2800 - total flux cleaned = -0.00220135 Jy ! Component: 2850 - total flux cleaned = -0.00208258 Jy ! Component: 2900 - total flux cleaned = -0.00183586 Jy ! Component: 2950 - total flux cleaned = -0.00170802 Jy ! Component: 3000 - total flux cleaned = -0.00143788 Jy ! Component: 3050 - total flux cleaned = -0.00129607 Jy ! Component: 3100 - total flux cleaned = -0.00100193 Jy ! Component: 3150 - total flux cleaned = -0.000692235 Jy ! Component: 3200 - total flux cleaned = -0.000367147 Jy ! Component: 3250 - total flux cleaned = -0.000194674 Jy ! Component: 3300 - total flux cleaned = 0.000153135 Jy ! Component: 3350 - total flux cleaned = 0.000520049 Jy ! Component: 3400 - total flux cleaned = 0.000904158 Jy ! Component: 3450 - total flux cleaned = 0.00130886 Jy ! Component: 3500 - total flux cleaned = 0.00151693 Jy ! Component: 3550 - total flux cleaned = 0.00196125 Jy ! Component: 3600 - total flux cleaned = 0.00242358 Jy ! Component: 3650 - total flux cleaned = 0.00267368 Jy ! Component: 3700 - total flux cleaned = 0.00292201 Jy ! Component: 3750 - total flux cleaned = 0.00345708 Jy ! Component: 3800 - total flux cleaned = 0.00373964 Jy ! Component: 3850 - total flux cleaned = 0.00403016 Jy ! Component: 3900 - total flux cleaned = 0.00463822 Jy ! Component: 3950 - total flux cleaned = 0.00495661 Jy ! Component: 4000 - total flux cleaned = 0.00562712 Jy ! Component: 4050 - total flux cleaned = 0.00598146 Jy ! Total flux subtracted in 4096 components = 0.00634712 Jy ! Clean residual min=-0.020997 max=0.023397 Jy/beam ! Clean residual mean=-0.000158 rms=0.004431 Jy/beam ! Combined flux in latest and established models = 0.20623 Jy keep ! Adding 159 model components to the UV plane model. ! The established model now contains 204 components and 0.20623 Jy ![Exited script file: muppet] wmap "J0008-3601_S_2017_01_21_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.49 x 6.779 at -4.767 degrees (North through East) ! Clean map min=-0.034458 max=0.17653 Jy/beam ! Writing clean map to FITS file: J0008-3601_S_2017_01_21_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.176534 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00369326 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -6.27629 6.27629 12.5526 25.1051 50.2103 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.011 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.176 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.49 x 6.779 at -4.767 degrees (North through East) ! Clean map min=-0.034458 max=0.17653 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0008-3601_S_2017_01_21_pus_uvs.log closed on Sun May 5 15:42:34 2019