! Started logfile: J0006-2955_S_2017_05_27_pus_uvs.log on Fri May 3 10:52:09 2019 obs J0006-2955_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0006-2955_S_2017_05_27_pus_uva.fits ! AN table 1: 94 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.858629 visibilities/baseline/integration-bin. ! Found source: J0006-2955 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 14528 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0006-2955_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 70 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 117 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 494 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.890355Jy sigma=0.019700 ! Fit after self-cal, rms=0.879722Jy sigma=0.019663 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.671 mas, bmaj=7.588 mas, bpa=-5.336 degrees ! Estimated noise=1197.19 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0692183 Jy ! Component: 100 - total flux cleaned = 0.0755118 Jy ! Total flux subtracted in 100 components = 0.0755118 Jy ! Clean residual min=-0.016737 max=0.027757 Jy/beam ! Clean residual mean=-0.000069 rms=0.005798 Jy/beam ! Combined flux in latest and established models = 0.0755118 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0755118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.139587Jy sigma=0.001585 ! Fit after self-cal, rms=0.139624Jy sigma=0.001584 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.083 mas, bmaj=8.242 mas, bpa=-5.183 degrees ! Estimated noise=828.953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171845 Jy ! Component: 100 - total flux cleaned = 0.0221184 Jy ! Component: 150 - total flux cleaned = 0.0223156 Jy ! Component: 200 - total flux cleaned = 0.0224932 Jy ! Total flux subtracted in 200 components = 0.0224932 Jy ! Clean residual min=-0.014056 max=0.023551 Jy/beam ! Clean residual mean=-0.000081 rms=0.005435 Jy/beam ! Combined flux in latest and established models = 0.098005 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.098005 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.134021Jy sigma=0.001851 ! Fit after self-cal, rms=0.134040Jy sigma=0.001851 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 22.79 FD 0.80 HN 1.09 KP 0.88 ! LA 0.84 MK 1.05 NL 0.81 OV 0.90 ! PT 0.90 SC 0.81 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.81 HN 1.08 KP 0.81 ! LA 0.79 MK 0.97 NL 0.88 OV 0.87 ! PT 0.86 SC 0.84 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.85 HN 1.06 KP 0.83 ! LA 0.82 MK 1.01 NL 0.88 OV 0.79 ! PT 0.88 SC 0.82 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 0.83 HN 0.89 KP 1.00* ! LA 0.85 MK 1.05 NL 1.00* OV 1.00* ! PT 0.91 SC 1.00* ! ! ! Fit before self-cal, rms=0.134040Jy sigma=0.001851 ! Fit after self-cal, rms=1.258174Jy sigma=0.000694 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.978 mas, bmaj=8.195 mas, bpa=-4.055 degrees ! Estimated noise=835.662 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195666 Jy ! Component: 100 - total flux cleaned = 0.00221154 Jy ! Component: 150 - total flux cleaned = 0.0022832 Jy ! Component: 200 - total flux cleaned = 0.00228336 Jy ! Total flux subtracted in 200 components = 0.00228336 Jy ! Clean residual min=-0.003257 max=0.003008 Jy/beam ! Clean residual mean=-0.000006 rms=0.000762 Jy/beam ! Combined flux in latest and established models = 0.100288 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 18 components and 0.100288 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.257881Jy sigma=0.000693 ! Fit after self-cal, rms=1.257944Jy sigma=0.000674 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.257944Jy sigma=0.000674 ! Fit after self-cal, rms=1.666564Jy sigma=0.000672 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.97 mas, bmaj=8.187 mas, bpa=-4.307 degrees ! Estimated noise=831.271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195482 Jy ! Component: 100 - total flux cleaned = 0.00201491 Jy ! Component: 150 - total flux cleaned = 0.00207078 Jy ! Component: 200 - total flux cleaned = 0.0021192 Jy ! Total flux subtracted in 200 components = 0.0021192 Jy ! Clean residual min=-0.002915 max=0.002890 Jy/beam ! Clean residual mean=-0.000007 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.102408 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 22 components and 0.102408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.666312Jy sigma=0.000671 ! Fit after self-cal, rms=1.666314Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.54481e-05 Jy ! Component: 100 - total flux cleaned = 0.000100306 Jy ! Component: 150 - total flux cleaned = 0.000141344 Jy ! Component: 200 - total flux cleaned = 0.000175262 Jy ! Total flux subtracted in 200 components = 0.000175262 Jy ! Clean residual min=-0.002936 max=0.002810 Jy/beam ! Clean residual mean=-0.000006 rms=0.000713 Jy/beam ! Combined flux in latest and established models = 0.102583 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.102583 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.666228Jy sigma=0.000671 ! Fit after self-cal, rms=1.666230Jy sigma=0.000671 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.666230Jy sigma=0.000671 ! Fit after self-cal, rms=1.715101Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.953 mas, bmaj=8.148 mas, bpa=-4.518 degrees ! Estimated noise=843.785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192655 Jy ! Component: 100 - total flux cleaned = 0.00251155 Jy ! Component: 150 - total flux cleaned = 0.00251138 Jy ! Component: 200 - total flux cleaned = 0.00255984 Jy ! Total flux subtracted in 200 components = 0.00255984 Jy ! Clean residual min=-0.002835 max=0.002677 Jy/beam ! Clean residual mean=-0.000008 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.105143 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 35 components and 0.105143 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.714860Jy sigma=0.000671 ! Fit after self-cal, rms=1.714862Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.60508e-05 Jy ! Component: 100 - total flux cleaned = 4.74013e-05 Jy ! Component: 150 - total flux cleaned = 6.70803e-05 Jy ! Component: 200 - total flux cleaned = 8.56828e-05 Jy ! Total flux subtracted in 200 components = 8.56828e-05 Jy ! Clean residual min=-0.002911 max=0.002630 Jy/beam ! Clean residual mean=-0.000008 rms=0.000719 Jy/beam ! Combined flux in latest and established models = 0.105228 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.105228 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.714826Jy sigma=0.000671 ! Fit after self-cal, rms=1.714827Jy sigma=0.000671 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.714827Jy sigma=0.000671 ! Fit after self-cal, rms=1.759737Jy sigma=0.000671 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.989 mas, bmaj=22.71 mas, bpa=-0.1902 degrees ! Estimated noise=1075.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220534 Jy ! Component: 100 - total flux cleaned = 0.00255404 Jy ! Component: 150 - total flux cleaned = 0.00257315 Jy ! Component: 200 - total flux cleaned = 0.00255419 Jy ! Total flux subtracted in 200 components = 0.00255419 Jy ! Clean residual min=-0.004006 max=0.002951 Jy/beam ! Clean residual mean=-0.000018 rms=0.001063 Jy/beam ! Combined flux in latest and established models = 0.107783 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 46 components and 0.107783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.759481Jy sigma=0.000671 ! Fit after self-cal, rms=1.759479Jy sigma=0.000671 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.08462e-06 Jy ! Component: 100 - total flux cleaned = -1.83352e-06 Jy ! Component: 150 - total flux cleaned = -1.93077e-05 Jy ! Component: 200 - total flux cleaned = -5.06353e-05 Jy ! Total flux subtracted in 200 components = -5.06353e-05 Jy ! Clean residual min=-0.003951 max=0.002954 Jy/beam ! Clean residual mean=-0.000018 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.107732 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 52 components and 0.107732 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.759452Jy sigma=0.000671 ! Fit after self-cal, rms=1.759448Jy sigma=0.000671 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=8.112 mas, bpa=-4.619 degrees ! Estimated noise=858.686 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.936 x 8.112 at -4.619 degrees (North through East) ! Clean map min=-0.0028991 max=0.10291 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.394 mas, bmaj=7.119 mas, bpa=-4.961 degrees ! Estimated noise=1416.83 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0832057 Jy ! Component: 100 - total flux cleaned = 0.101505 Jy ! Component: 150 - total flux cleaned = 0.107211 Jy ! Component: 200 - total flux cleaned = 0.109401 Jy ! Total flux subtracted in 200 components = 0.109401 Jy ! Clean residual min=-0.004373 max=0.004348 Jy/beam ! Clean residual mean=-0.000009 rms=0.001107 Jy/beam ! Combined flux in latest and established models = 0.109401 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.109401 Jy ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=8.112 mas, bpa=-4.619 degrees ! Estimated noise=858.686 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00197869 Jy ! Component: 100 - total flux cleaned = -0.00212581 Jy ! Component: 150 - total flux cleaned = -0.00207444 Jy ! Component: 200 - total flux cleaned = -0.00200837 Jy ! Total flux subtracted in 200 components = -0.00200837 Jy ! Clean residual min=-0.003136 max=0.002505 Jy/beam ! Clean residual mean=-0.000009 rms=0.000742 Jy/beam ! Combined flux in latest and established models = 0.107393 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 32 components and 0.107393 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.989 mas, bmaj=22.71 mas, bpa=-0.1902 degrees ! Estimated noise=1075.04 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.34842e-05 Jy ! Component: 100 - total flux cleaned = -6.22416e-05 Jy ! Component: 150 - total flux cleaned = -6.15032e-05 Jy ! Component: 200 - total flux cleaned = -6.00242e-05 Jy ! Total flux subtracted in 200 components = -6.00242e-05 Jy ! Clean residual min=-0.003762 max=0.002989 Jy/beam ! Clean residual mean=-0.000020 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.107333 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.75375e-06 Jy ! Component: 100 - total flux cleaned = -8.71191e-06 Jy ! Component: 150 - total flux cleaned = -9.63312e-06 Jy ! Component: 200 - total flux cleaned = -1.11966e-05 Jy ! Total flux subtracted in 200 components = -1.11966e-05 Jy ! Clean residual min=-0.003757 max=0.003000 Jy/beam ! Clean residual mean=-0.000020 rms=0.001065 Jy/beam ! Combined flux in latest and established models = 0.107321 Jy ! Adding 8 model components to the UV plane model. ! The established model now contains 39 components and 0.107321 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.936 mas, bmaj=8.112 mas, bpa=-4.619 degrees ! Estimated noise=858.686 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156772 Jy ! Component: 100 - total flux cleaned = 0.000157336 Jy ! Component: 150 - total flux cleaned = 0.000174338 Jy ! Component: 200 - total flux cleaned = 0.000191084 Jy ! Total flux subtracted in 200 components = 0.000191084 Jy ! Clean residual min=-0.003143 max=0.002518 Jy/beam ! Clean residual mean=-0.000009 rms=0.000743 Jy/beam ! Combined flux in latest and established models = 0.107512 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.107512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.759358Jy sigma=0.000671 ! Fit after self-cal, rms=1.759350Jy sigma=0.000671 wmodel J0006-2955_S_2017_05_27_pus_map.mod ! Writing 48 model components to file: J0006-2955_S_2017_05_27_pus_map.mod wobs J0006-2955_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0006-2955_S_2017_05_27_pus_uvs.fits wwins J0006-2955_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0006-2955_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00142675 Jy ! Component: 100 - total flux cleaned = -0.00260384 Jy ! Component: 150 - total flux cleaned = -0.00341582 Jy ! Component: 200 - total flux cleaned = -0.00377928 Jy ! Component: 250 - total flux cleaned = -0.00408578 Jy ! Component: 300 - total flux cleaned = -0.00421247 Jy ! Component: 350 - total flux cleaned = -0.00421133 Jy ! Component: 400 - total flux cleaned = -0.00425164 Jy ! Component: 450 - total flux cleaned = -0.00433107 Jy ! Component: 500 - total flux cleaned = -0.00437041 Jy ! Component: 550 - total flux cleaned = -0.00444772 Jy ! Component: 600 - total flux cleaned = -0.00459964 Jy ! Component: 650 - total flux cleaned = -0.00474932 Jy ! Component: 700 - total flux cleaned = -0.00482296 Jy ! Component: 750 - total flux cleaned = -0.00493296 Jy ! Component: 800 - total flux cleaned = -0.00504199 Jy ! Component: 850 - total flux cleaned = -0.00515002 Jy ! Component: 900 - total flux cleaned = -0.00522134 Jy ! Component: 950 - total flux cleaned = -0.00536258 Jy ! Component: 1000 - total flux cleaned = -0.00536232 Jy ! Component: 1050 - total flux cleaned = -0.00546653 Jy ! Component: 1100 - total flux cleaned = -0.00553534 Jy ! Component: 1150 - total flux cleaned = -0.00553534 Jy ! Component: 1200 - total flux cleaned = -0.00567122 Jy ! Component: 1250 - total flux cleaned = -0.00563749 Jy ! Component: 1300 - total flux cleaned = -0.00573831 Jy ! Component: 1350 - total flux cleaned = -0.00580512 Jy ! Component: 1400 - total flux cleaned = -0.00593752 Jy ! Component: 1450 - total flux cleaned = -0.00590446 Jy ! Component: 1500 - total flux cleaned = -0.00603529 Jy ! Component: 1550 - total flux cleaned = -0.00593755 Jy ! Component: 1600 - total flux cleaned = -0.00603462 Jy ! Component: 1650 - total flux cleaned = -0.0060991 Jy ! Component: 1700 - total flux cleaned = -0.00616293 Jy ! Component: 1750 - total flux cleaned = -0.00613098 Jy ! Component: 1800 - total flux cleaned = -0.00622594 Jy ! Component: 1850 - total flux cleaned = -0.00628854 Jy ! Component: 1900 - total flux cleaned = -0.00628848 Jy ! Component: 1950 - total flux cleaned = -0.00631956 Jy ! Component: 2000 - total flux cleaned = -0.00628852 Jy ! Component: 2050 - total flux cleaned = -0.00641189 Jy ! Component: 2100 - total flux cleaned = -0.00644261 Jy ! Component: 2150 - total flux cleaned = -0.00641223 Jy ! Component: 2200 - total flux cleaned = -0.00641229 Jy ! Component: 2250 - total flux cleaned = -0.00647295 Jy ! Component: 2300 - total flux cleaned = -0.00653333 Jy ! Component: 2350 - total flux cleaned = -0.00656347 Jy ! Component: 2400 - total flux cleaned = -0.00662315 Jy ! Component: 2450 - total flux cleaned = -0.00659338 Jy ! Component: 2500 - total flux cleaned = -0.00662299 Jy ! Component: 2550 - total flux cleaned = -0.00665231 Jy ! Component: 2600 - total flux cleaned = -0.00665235 Jy ! Component: 2650 - total flux cleaned = -0.00671093 Jy ! Component: 2700 - total flux cleaned = -0.00676912 Jy ! Component: 2750 - total flux cleaned = -0.0067691 Jy ! Component: 2800 - total flux cleaned = -0.00679807 Jy ! Component: 2850 - total flux cleaned = -0.0067692 Jy ! Component: 2900 - total flux cleaned = -0.0067979 Jy ! Component: 2950 - total flux cleaned = -0.00682639 Jy ! Component: 3000 - total flux cleaned = -0.00685487 Jy ! Component: 3050 - total flux cleaned = -0.00685493 Jy ! Component: 3100 - total flux cleaned = -0.00688316 Jy ! Component: 3150 - total flux cleaned = -0.00696769 Jy ! Component: 3200 - total flux cleaned = -0.00693947 Jy ! Component: 3250 - total flux cleaned = -0.00688357 Jy ! Component: 3300 - total flux cleaned = -0.00693945 Jy ! Component: 3350 - total flux cleaned = -0.00693948 Jy ! Component: 3400 - total flux cleaned = -0.00696721 Jy ! Component: 3450 - total flux cleaned = -0.00693955 Jy ! Component: 3500 - total flux cleaned = -0.00691208 Jy ! Component: 3550 - total flux cleaned = -0.00696717 Jy ! Component: 3600 - total flux cleaned = -0.00699466 Jy ! Component: 3650 - total flux cleaned = -0.00702203 Jy ! Component: 3700 - total flux cleaned = -0.00702219 Jy ! Component: 3750 - total flux cleaned = -0.00704938 Jy ! Component: 3800 - total flux cleaned = -0.00699485 Jy ! Component: 3850 - total flux cleaned = -0.00704916 Jy ! Component: 3900 - total flux cleaned = -0.0070221 Jy ! Component: 3950 - total flux cleaned = -0.00704909 Jy ! Component: 4000 - total flux cleaned = -0.00707618 Jy ! Component: 4050 - total flux cleaned = -0.00699548 Jy ! Total flux subtracted in 4096 components = -0.00702229 Jy ! Clean residual min=-0.001649 max=0.001384 Jy/beam ! Clean residual mean=-0.000008 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.10049 Jy keep ! Adding 260 model components to the UV plane model. ! The established model now contains 307 components and 0.10049 Jy ![Exited script file: muppet] wmap "J0006-2955_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.936 x 8.112 at -4.619 degrees (North through East) ! Clean map min=-0.0038965 max=0.10696 Jy/beam ! Writing clean map to FITS file: J0006-2955_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.106965 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000512902 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.43851 1.43851 2.87703 5.75406 11.5081 23.0162 46.0325 92.0649 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0015 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.106 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.936 x 8.112 at -4.619 degrees (North through East) ! Clean map min=-0.0038965 max=0.10696 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0006-2955_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:52:13 2019