! Started logfile: J0006+2422_S_2017_05_27_pus_uvs.log on Fri May 3 10:52:04 2019 obs J0006+2422_S_2017_05_27_pus_uva.fits ! Reading UV FITS file: J0006+2422_S_2017_05_27_pus_uva.fits ! AN table 1: 144 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.975 visibilities/baseline/integration-bin. ! Found source: J0006+2422 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 1211 lines of history. ! ! Reading 25272 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0006+2422_S_2017_05_27_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 21 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 742 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.861064Jy sigma=0.027034 ! Fit after self-cal, rms=0.854574Jy sigma=0.027004 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.843 mas, bmaj=6.229 mas, bpa=-4.568 degrees ! Estimated noise=687.384 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0857617 Jy ! Component: 100 - total flux cleaned = 0.110384 Jy ! Total flux subtracted in 100 components = 0.110384 Jy ! Clean residual min=-0.013336 max=0.016181 Jy/beam ! Clean residual mean=-0.000015 rms=0.003923 Jy/beam ! Combined flux in latest and established models = 0.110384 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.110384 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106140Jy sigma=0.002708 ! Fit after self-cal, rms=0.106087Jy sigma=0.002708 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.438 mas, bmaj=6.996 mas, bpa=-3.635 degrees ! Estimated noise=427.129 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0149352 Jy ! Component: 100 - total flux cleaned = 0.024072 Jy ! Component: 150 - total flux cleaned = 0.02847 Jy ! Component: 200 - total flux cleaned = 0.0292059 Jy ! Total flux subtracted in 200 components = 0.0292059 Jy ! Clean residual min=-0.011102 max=0.016658 Jy/beam ! Clean residual mean=-0.000013 rms=0.003340 Jy/beam ! Combined flux in latest and established models = 0.13959 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 24 components and 0.13959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101474Jy sigma=0.002842 ! Fit after self-cal, rms=0.101415Jy sigma=0.002842 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.74 HN 0.94 KP 0.97 ! LA 0.98 MK 1.00 NL 0.82 OV 0.91 ! PT 0.95 SC 0.75 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 19.26 FD 0.79 HN 0.96 KP 0.88 ! LA 0.87 MK 1.00 NL 0.98 OV 0.94 ! PT 0.93 SC 0.82 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.68 FD 0.82 HN 1.05 KP 0.91 ! LA 0.92 MK 1.02 NL 0.96 OV 0.85 ! PT 0.92 SC 0.82 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* FD 14.45 HN 0.96 KP 1.00* ! LA 0.91 MK 1.01 NL 1.00* OV 1.00* ! PT 0.99 SC 1.00* ! ! ! Fit before self-cal, rms=0.101415Jy sigma=0.002842 ! Fit after self-cal, rms=0.870039Jy sigma=0.000794 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.32 mas, bmaj=7.196 mas, bpa=-1.685 degrees ! Estimated noise=470.439 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00628922 Jy ! Component: 100 - total flux cleaned = 0.00569173 Jy ! Component: 150 - total flux cleaned = 0.00525746 Jy ! Component: 200 - total flux cleaned = 0.00509759 Jy ! Total flux subtracted in 200 components = 0.00509759 Jy ! Clean residual min=-0.005708 max=0.004210 Jy/beam ! Clean residual mean=0.000002 rms=0.001115 Jy/beam ! Combined flux in latest and established models = 0.144687 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.144687 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.866586Jy sigma=0.000796 ! Fit after self-cal, rms=0.866941Jy sigma=0.000786 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.866941Jy sigma=0.000786 ! Fit after self-cal, rms=1.081787Jy sigma=0.000757 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.294 mas, bmaj=7.236 mas, bpa=-2.68 degrees ! Estimated noise=492.859 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00634035 Jy ! Component: 100 - total flux cleaned = 0.00595967 Jy ! Component: 150 - total flux cleaned = 0.00552471 Jy ! Component: 200 - total flux cleaned = 0.00515508 Jy ! Total flux subtracted in 200 components = 0.00515508 Jy ! Clean residual min=-0.005360 max=0.003508 Jy/beam ! Clean residual mean=0.000001 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.149842 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 37 components and 0.149842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.079340Jy sigma=0.000761 ! Fit after self-cal, rms=1.079349Jy sigma=0.000760 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000329246 Jy ! Component: 100 - total flux cleaned = -0.000703731 Jy ! Component: 150 - total flux cleaned = -0.000942893 Jy ! Component: 200 - total flux cleaned = -0.0010854 Jy ! Total flux subtracted in 200 components = -0.0010854 Jy ! Clean residual min=-0.005314 max=0.003388 Jy/beam ! Clean residual mean=0.000002 rms=0.000970 Jy/beam ! Combined flux in latest and established models = 0.148757 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 48 components and 0.148757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.078695Jy sigma=0.000762 ! Fit after self-cal, rms=1.078696Jy sigma=0.000762 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.078696Jy sigma=0.000762 ! Fit after self-cal, rms=1.047985Jy sigma=0.000720 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.295 mas, bmaj=7.221 mas, bpa=-3.259 degrees ! Estimated noise=506.688 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00413632 Jy ! Component: 100 - total flux cleaned = 0.00431632 Jy ! Component: 150 - total flux cleaned = 0.00431456 Jy ! Component: 200 - total flux cleaned = 0.00425954 Jy ! Total flux subtracted in 200 components = 0.00425954 Jy ! Clean residual min=-0.004149 max=0.002755 Jy/beam ! Clean residual mean=0.000005 rms=0.000800 Jy/beam ! Combined flux in latest and established models = 0.153017 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 56 components and 0.153017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.047059Jy sigma=0.000722 ! Fit after self-cal, rms=1.047055Jy sigma=0.000721 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.04759e-05 Jy ! Component: 100 - total flux cleaned = -0.000119385 Jy ! Component: 150 - total flux cleaned = -0.000117298 Jy ! Component: 200 - total flux cleaned = -0.00011739 Jy ! Total flux subtracted in 200 components = -0.00011739 Jy ! Clean residual min=-0.004230 max=0.002660 Jy/beam ! Clean residual mean=0.000005 rms=0.000794 Jy/beam ! Combined flux in latest and established models = 0.152899 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 60 components and 0.152899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.046839Jy sigma=0.000722 ! Fit after self-cal, rms=1.046838Jy sigma=0.000722 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.046838Jy sigma=0.000722 ! Fit after self-cal, rms=1.110552Jy sigma=0.000720 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.274 mas, bmaj=10.78 mas, bpa=-6.487 degrees ! Estimated noise=651.428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0030899 Jy ! Component: 100 - total flux cleaned = 0.00275353 Jy ! Component: 150 - total flux cleaned = 0.00256648 Jy ! Component: 200 - total flux cleaned = 0.00240376 Jy ! Total flux subtracted in 200 components = 0.00240376 Jy ! Clean residual min=-0.004705 max=0.003005 Jy/beam ! Clean residual mean=0.000011 rms=0.001037 Jy/beam ! Combined flux in latest and established models = 0.155303 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 63 components and 0.155303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.109427Jy sigma=0.000723 ! Fit after self-cal, rms=1.109426Jy sigma=0.000723 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00020168 Jy ! Component: 100 - total flux cleaned = -0.000258777 Jy ! Component: 150 - total flux cleaned = -0.000358277 Jy ! Component: 200 - total flux cleaned = -0.000442078 Jy ! Total flux subtracted in 200 components = -0.000442078 Jy ! Clean residual min=-0.004814 max=0.003074 Jy/beam ! Clean residual mean=0.000012 rms=0.001028 Jy/beam ! Combined flux in latest and established models = 0.154861 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 67 components and 0.154861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.109031Jy sigma=0.000724 ! Fit after self-cal, rms=1.109029Jy sigma=0.000724 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=7.259 mas, bpa=-3.679 degrees ! Estimated noise=523.679 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.292 x 7.259 at -3.679 degrees (North through East) ! Clean map min=-0.0046488 max=0.1432 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.676 mas, bmaj=6.282 mas, bpa=-3.474 degrees ! Estimated noise=842.701 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.105591 Jy ! Component: 100 - total flux cleaned = 0.137352 Jy ! Component: 150 - total flux cleaned = 0.150602 Jy ! Component: 200 - total flux cleaned = 0.156573 Jy ! Total flux subtracted in 200 components = 0.156573 Jy ! Clean residual min=-0.004596 max=0.004172 Jy/beam ! Clean residual mean=-0.000002 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.156573 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.156573 Jy ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=7.259 mas, bpa=-3.679 degrees ! Estimated noise=523.679 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104877 Jy ! Component: 100 - total flux cleaned = 0.000925997 Jy ! Component: 150 - total flux cleaned = 0.000930543 Jy ! Component: 200 - total flux cleaned = 0.000926017 Jy ! Total flux subtracted in 200 components = 0.000926017 Jy ! Clean residual min=-0.004592 max=0.003107 Jy/beam ! Clean residual mean=0.000004 rms=0.000862 Jy/beam ! Combined flux in latest and established models = 0.157499 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 28 components and 0.157499 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.274 mas, bmaj=10.78 mas, bpa=-6.487 degrees ! Estimated noise=651.428 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011302 Jy ! Component: 100 - total flux cleaned = -0.00152465 Jy ! Component: 150 - total flux cleaned = -0.00184771 Jy ! Component: 200 - total flux cleaned = -0.00198324 Jy ! Total flux subtracted in 200 components = -0.00198324 Jy ! Clean residual min=-0.004846 max=0.002967 Jy/beam ! Clean residual mean=0.000011 rms=0.001039 Jy/beam ! Combined flux in latest and established models = 0.155515 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00017253 Jy ! Component: 100 - total flux cleaned = -0.000269958 Jy ! Component: 150 - total flux cleaned = -0.000355264 Jy ! Component: 200 - total flux cleaned = -0.000462086 Jy ! Total flux subtracted in 200 components = -0.000462086 Jy ! Clean residual min=-0.004845 max=0.003025 Jy/beam ! Clean residual mean=0.000012 rms=0.001032 Jy/beam ! Combined flux in latest and established models = 0.155053 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 40 components and 0.155053 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.292 mas, bmaj=7.259 mas, bpa=-3.679 degrees ! Estimated noise=523.679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00178105 Jy ! Component: 100 - total flux cleaned = 0.001781 Jy ! Component: 150 - total flux cleaned = 0.00166996 Jy ! Component: 200 - total flux cleaned = 0.00167341 Jy ! Total flux subtracted in 200 components = 0.00167341 Jy ! Clean residual min=-0.004667 max=0.002846 Jy/beam ! Clean residual mean=0.000006 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.156727 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.156727 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.108999Jy sigma=0.000724 ! Fit after self-cal, rms=1.109002Jy sigma=0.000724 wmodel J0006+2422_S_2017_05_27_pus_map.mod ! Writing 49 model components to file: J0006+2422_S_2017_05_27_pus_map.mod wobs J0006+2422_S_2017_05_27_pus_uvs.fits ! Writing UV FITS file: J0006+2422_S_2017_05_27_pus_uvs.fits wwins J0006+2422_S_2017_05_27_pus_map.win ! wwins: Wrote 1 windows to J0006+2422_S_2017_05_27_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00190231 Jy ! Component: 100 - total flux cleaned = -0.00346151 Jy ! Component: 150 - total flux cleaned = -0.00492511 Jy ! Component: 200 - total flux cleaned = -0.00615601 Jy ! Component: 250 - total flux cleaned = -0.00728669 Jy ! Component: 300 - total flux cleaned = -0.00837959 Jy ! Component: 350 - total flux cleaned = -0.00913738 Jy ! Component: 400 - total flux cleaned = -0.0096298 Jy ! Component: 450 - total flux cleaned = -0.0101611 Jy ! Component: 500 - total flux cleaned = -0.010775 Jy ! Component: 550 - total flux cleaned = -0.0112382 Jy ! Component: 600 - total flux cleaned = -0.0117846 Jy ! Component: 650 - total flux cleaned = -0.0120981 Jy ! Component: 700 - total flux cleaned = -0.0125401 Jy ! Component: 750 - total flux cleaned = -0.0130181 Jy ! Component: 800 - total flux cleaned = -0.0134886 Jy ! Component: 850 - total flux cleaned = -0.0138678 Jy ! Component: 900 - total flux cleaned = -0.0143245 Jy ! Component: 950 - total flux cleaned = -0.0146934 Jy ! Component: 1000 - total flux cleaned = -0.0150981 Jy ! Component: 1050 - total flux cleaned = -0.0153783 Jy ! Component: 1100 - total flux cleaned = -0.0157738 Jy ! Component: 1150 - total flux cleaned = -0.0159298 Jy ! Component: 1200 - total flux cleaned = -0.0163171 Jy ! Component: 1250 - total flux cleaned = -0.016546 Jy ! Component: 1300 - total flux cleaned = -0.0167347 Jy ! Component: 1350 - total flux cleaned = -0.0170337 Jy ! Component: 1400 - total flux cleaned = -0.0172188 Jy ! Component: 1450 - total flux cleaned = -0.0172922 Jy ! Component: 1500 - total flux cleaned = -0.0176189 Jy ! Component: 1550 - total flux cleaned = -0.0177624 Jy ! Component: 1600 - total flux cleaned = -0.0179763 Jy ! Component: 1650 - total flux cleaned = -0.0182237 Jy ! Component: 1700 - total flux cleaned = -0.0183985 Jy ! Component: 1750 - total flux cleaned = -0.018607 Jy ! Component: 1800 - total flux cleaned = -0.0188821 Jy ! Component: 1850 - total flux cleaned = -0.0191207 Jy ! Component: 1900 - total flux cleaned = -0.0193235 Jy ! Component: 1950 - total flux cleaned = -0.0195246 Jy ! Component: 2000 - total flux cleaned = -0.0197244 Jy ! Component: 2050 - total flux cleaned = -0.0198234 Jy ! Component: 2100 - total flux cleaned = -0.0200853 Jy ! Component: 2150 - total flux cleaned = -0.0203125 Jy ! Component: 2200 - total flux cleaned = -0.0204411 Jy ! Component: 2250 - total flux cleaned = -0.0205369 Jy ! Component: 2300 - total flux cleaned = -0.0207909 Jy ! Component: 2350 - total flux cleaned = -0.0209487 Jy ! Component: 2400 - total flux cleaned = -0.0210738 Jy ! Component: 2450 - total flux cleaned = -0.0211981 Jy ! Component: 2500 - total flux cleaned = -0.0213523 Jy ! Component: 2550 - total flux cleaned = -0.021536 Jy ! Component: 2600 - total flux cleaned = -0.0216575 Jy ! Component: 2650 - total flux cleaned = -0.0217481 Jy ! Component: 2700 - total flux cleaned = -0.021868 Jy ! Component: 2750 - total flux cleaned = -0.0220167 Jy ! Component: 2800 - total flux cleaned = -0.0220759 Jy ! Component: 2850 - total flux cleaned = -0.0221349 Jy ! Component: 2900 - total flux cleaned = -0.0222226 Jy ! Component: 2950 - total flux cleaned = -0.0223098 Jy ! Component: 3000 - total flux cleaned = -0.0223387 Jy ! Component: 3050 - total flux cleaned = -0.0224534 Jy ! Component: 3100 - total flux cleaned = -0.0225387 Jy ! Component: 3150 - total flux cleaned = -0.0225384 Jy ! Component: 3200 - total flux cleaned = -0.022623 Jy ! Component: 3250 - total flux cleaned = -0.0227349 Jy ! Component: 3300 - total flux cleaned = -0.0227349 Jy ! Component: 3350 - total flux cleaned = -0.0228181 Jy ! Component: 3400 - total flux cleaned = -0.0229006 Jy ! Component: 3450 - total flux cleaned = -0.0229555 Jy ! Component: 3500 - total flux cleaned = -0.0229827 Jy ! Component: 3550 - total flux cleaned = -0.0230907 Jy ! Component: 3600 - total flux cleaned = -0.0231984 Jy ! Component: 3650 - total flux cleaned = -0.0231983 Jy ! Component: 3700 - total flux cleaned = -0.0233586 Jy ! Component: 3750 - total flux cleaned = -0.0234647 Jy ! Component: 3800 - total flux cleaned = -0.0235175 Jy ! Component: 3850 - total flux cleaned = -0.0235437 Jy ! Component: 3900 - total flux cleaned = -0.0236744 Jy ! Component: 3950 - total flux cleaned = -0.0237526 Jy ! Component: 4000 - total flux cleaned = -0.023856 Jy ! Component: 4050 - total flux cleaned = -0.0239334 Jy ! Total flux subtracted in 4096 components = -0.0239849 Jy ! Clean residual min=-0.001537 max=0.001547 Jy/beam ! Clean residual mean=0.000003 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.132742 Jy keep ! Adding 319 model components to the UV plane model. ! The established model now contains 368 components and 0.132742 Jy ![Exited script file: muppet] wmap "J0006+2422_S_2017_05_27_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.292 x 7.259 at -3.679 degrees (North through East) ! Clean map min=-0.0040516 max=0.14362 Jy/beam ! Writing clean map to FITS file: J0006+2422_S_2017_05_27_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.143619 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000476239 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.9948 0.9948 1.9896 3.9792 7.9584 15.9168 31.8336 63.6672 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0014 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.143 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.292 x 7.259 at -3.679 degrees (North through East) ! Clean map min=-0.0040516 max=0.14362 Jy/beam ! Error occured in command: mapplot ! ! ! ! ! ! 4 consecutive EOF's on stdin - 10 will exit program ! ! 5 consecutive EOF's on stdin - 10 will exit program ! ! 6 consecutive EOF's on stdin - 10 will exit program ! ! 7 consecutive EOF's on stdin - 10 will exit program ! ! 8 consecutive EOF's on stdin - 10 will exit program ! ! 9 consecutive EOF's on stdin - 10 will exit program ! ! 10 consecutive EOF's on stdin - 10 will exit program ! Log file J0006+2422_S_2017_05_27_pus_uvs.log closed on Fri May 3 10:52:09 2019